CADD (2.24 MB) - Metropolitan Washington Airports Authority

Design Manual 

CADD 

2010 

M E T R O P O L I T A N W A S H I N G T O N A I R P O R T S A U T H O R I T Y

CADD Standards, CADD 

January 2010 

(This Page Blank) 

CADD - Page 2


January 2010 

PREFACE 

THE DESIGN MANUAL 

As part of the ongoing design and construction programs at Ronald Reagan Washington National Airport and Washington 

Dulles International Airport, the Metropolitan Washington Airports Authority (the Authority), Office of Engineering, has 

developed and adopted a series of documents that describe the codes, standards, details, products, and practices to be 

followed by Architect/Engineers (A/Es). These documents apply to all design of construction at all facilities on property 

owned by the Authority. Facilities constructed or modified on the site occupied by the National Air and Space Museum 

located at Washington Dulles International Airport are exempt from the requirements of the Authority Design Manual. 

The Design Manual has been developed to assist Architects/Engineers (A/Es) in understanding the practices and policies 

that must be incorporated into each project. The Design Manual contains a number of specific requirements that must be 

followed on all projects, as described above. These can be either Authority contracted projects, Authority direct-constructed 

projects, and tenant contracted projects. 

APPLICABILITY OF THE DESIGN MANUAL 

The requirements for design and construction incorporated into the Design Manual and Supporting Volumes are regulations 

approved by the Metropolitan Washington Airports Authority Board of Directors and shall be considered contract 

requirements for all A/Es who are performing services under contract to the Authority. Although A/Es who are under contract 

to tenants of the Authority may not be working under contract provisions that make compliance with these requirements 

mandatory, the Authority reserves the right, as Owner of all airport facilities, and land on which tenant buildings are 

constructed, to reject any design or work that does not comply with the requirements of the Design Manual and its 

supporting volumes. It is, therefore, required that all A/Es performing work that will be constructed on airport property shall 

perform services consistent with the Authority policies, standards, procedures, and construction requirements contained in 

the Design Manual and its supporting volumes. The Design Manual shall be considered equivalent to the building codes. 

The Design Manual in effect at the 30% Submittal will remain the Design Manual of record up to the 100% Final Submittal. 

ORGANIZATION OF THE DESIGN MANUAL 

The Design Manual is made up of seven volumes. 

Basic policies, procedures and standards for both Airports: 

• Design Manual 

Requirements for Ronald Reagan Washington National Airport: 

• DCA Vol. 1 - Airport Standards and Signing Guidelines 

• DCA Vol. 2 - Tenant Design Standards 

Requirements for Washington Dulles International Airport: 

• IAD Vol. 1 - Airport Design Standards and Signing Guidelines 

• IAD Vol. 2 - Main Terminal/Concourse Z Tenant Design Standards 

• IAD Vol. 3 - Concourse B Tenant Design Standards 

CADD - Page 3 

Preface


January 2010 

Requirements for All Projects: 

• CADD - CADD Design Standards [THIS DOCUMENT] 

The seven volumes are intended to supplement each other and must be used together, as appropriate for each airport, to 

achieve the desired goals of the Authority. 

An electronic version of the Design Manual and Supporting Volumes is available on CD-ROM, which may be obtained by 

contacting the Authority Office of Engineering. It is also available on the Authority website at www.mwaa.com under 

“Publications”. 

OTHER DOCUMENTS 

In addition to the Design Manual, the Authority also requires compliance for design and construction with additional policies, 

procedures, and standards that are published by other departments. These documents include: 

• Construction Safety Manual 

• Owner Controlled Wrap-Up Insurance Program Manual 

• Building Codes Manual 

• Contractors Safety and Security Information (Washington Dulles International Airport) 

• Safety Policy, Procedures, and Practices by the Risk Management Department 

• MASTERSPEC© Specifications Sections specifically edited for Authority projects (primarily Division 01, but 

including specific technical specification sections) 

• Ronald Reagan Washington National Airport and Washington Dulles International Airport Survey Control Data 

“To-Reach” Descriptions (two separate volumes) Note that the “To-Reach” documents for Washington Dulles 

International Airport are no longer provided on the CD-ROM version of the Design Manual. These documents are 

available through the Authority. The CD-ROM contains information directing the A/Es to the proper group within the 

Authority to obtain this document. 


Preface


January 2010 

ACCEPTABLE STANDARDS 

The standards established by the above referenced documents, together with Federal Aviation Administration (FAA), 

National Fire Protection Agency (NFPA), Virginia Uniform Statewide Building Code (USBC), Construction Specifications 

Institute (CSI), and other referenced materials establish the minimum level of quality and detail required of all Authority 

projects. These standards in many instances may exceed those used in non-Authority design and construction projects and 

are often above those established as “Code Minimums”, “Standards of the Industry”, or “generally accepted practices.” 

DESIGN MANUAL REVISIONS 

This edition of the Design Manual incorporates the modifications and additions that were developed during the Authority 

annual review of the previous year’s Design Manual. This review includes an analysis of the existing standards and an 

evaluation of the suggested revisions. 

If you feel that a standard or procedure stipulated in this edition of the Design Manual should be revised, we would like to 

know. To facilitate this, we have included a Design Manual review form that will place your idea in the appropriate hands. All 

suggestions received will be reviewed and researched and a written response will be provided. 


Preface


January 2010 

DESIGN MANUAL REVISION FORM 

SUGGESTED REVISION TO THE DESIGN MANUAL 

Date: Log Number: 11 

To: 

Ms. Diane R. Hirsch, PE 

Manager of Design 

Metropolitan Washington Airports Authority 

Ronald Reagan Washington National Airport 

Washington, DC 20001 

From: 

Design Manual Volume & Section: 

Design Manual Paragraph: 

Design Manual Page: 

Background: 

[Insert background for suggested change(s) here.] 

2010 Design Manual Text: 

[Copy and paste here the text from the 2010 Design Manual for which a revision will be suggested.] 

Proposed 2011 Design Manual Text: 

[Use RED text, normal font not bold, to indicate added language. Use “strikeout” to indicate deleted language. Do not use 

“track changes”.] 


Preface


January 2010 

TABLE OF CONTENTS 

PREFACE ................................................................................................................................................................................. 3 

TABLE OF CONTENTS............................................................................................................................................................ 7 

INTRODUCTION..................................................................................................................................................................... 11 

SECTION I: CADD Standards .............................................................................................................................................. 13 

CHAPTER 1 Introduction...................................................................................................................................................... 13 

1.1 CADD Software Requirements ......................................................................................................................... 13 

1.2 Purpose of This Manual .................................................................................................................................... 13 

1.3 Project Organization.......................................................................................................................................... 13 

CHAPTER 2 General Standards........................................................................................................................................... 15 

2.1 Limitations of Cadd Files.................................................................................................................................. 15 

2.2 Interchangeable Terminology .......................................................................................................................... 15 

2.3 Target Systems.................................................................................................................................................. 16 

2.4 Basic Drawing File Standards .......................................................................................................................... 16 

2.5 Drawing File Setup ............................................................................................................................................ 19 

2.6 Graphic Concepts.............................................................................................................................................. 20 

2.7 Level/Layer Assignments ................................................................................................................................. 27 

2.8 Compiling CADD features in Model Files........................................................................................................ 29 

2.9 Drawing Output.................................................................................................................................................. 29 

2.10 Deliverables, Data Exchange and Media Format.......................................................................................... 30 

2.11 Submittal Requirements ................................................................................................................................. 31 

CHAPTER 3 Drawing File Information................................................................................................................................. 33 

3.1 Naming Conventions......................................................................................................................................... 33 

3.2 Standard Sheet Formats (Cover Sheet and Title Block Sheet) ..................................................................... 33 

3.3 Drawing Preparation/Arrangement .................................................................................................................. 33 

3.4 Quality Check (QC) CADD Checklist................................................................................................................ 33 

3.5 Addenda Sketches............................................................................................................................................. 33 


Table of Contents


January 2010 

CHAPTER 4 Model File Level/Layer Assignment Tables................................................................................................... 49 

4.1 General ............................................................................................................................................................... 49 

4.2 Naming Conventions – Model Files and Level/Layer Tables......................................................................... 49 

4.3 Level/Layer Assignment Tables – Model Files ............................................................................................... 52 

4.4 Assignment Tables............................................................................................................................................ 54 

4.5 Hazardous Materials.......................................................................................................................................... 57 

4.6 Civil ..................................................................................................................................................................... 62 

4.7 Fueling Systems .............................................................................................................................................. 130 

4.8 Landscape........................................................................................................................................................ 134 

4.9 Structural Buildings ........................................................................................................................................ 139 

4.10 Structural Civil ............................................................................................................................................... 151 

4.11 Architectural .................................................................................................................................................. 163 

4.12 Interiors .......................................................................................................................................................... 173 

4.13 Fire Protection ............................................................................................................................................... 182 

4.14 Fire Alarm System ......................................................................................................................................... 189 

4.15 Plumbing ........................................................................................................................................................ 193 

4.16 Mechanical ..................................................................................................................................................... 198 

4.17 Electrical......................................................................................................................................................... 217 

4.18 Communications............................................................................................................................................ 233 

4.19 Baggage Handling System ........................................................................................................................... 238 

4.20 Security & Access Control System.............................................................................................................. 243 

4.21 Public Information System ........................................................................................................................... 249 

4.22 Aviation Information System........................................................................................................................ 253 

4.23 Electronic Monitoring System...................................................................................................................... 256 

CHAPTER 5 Sheet File Level/Layer Assignment Tables ................................................................................................. 259 

5.1 General ............................................................................................................................................................. 260 

5.2 Hazardous Materials........................................................................................................................................ 261 

5.3 Survey/Mapping............................................................................................................................................... 262 

5.4 Geotechnical .................................................................................................................................................... 263 

5.5 Civil ................................................................................................................................................................... 264 


Table of Contents


January 2010 

5.6 Landscape........................................................................................................................................................ 265 

5.7 Structural.......................................................................................................................................................... 266 

5.8 Structural Civil ................................................................................................................................................. 267 

5.9 Architectural..................................................................................................................................................... 268 

5.10 Interiors .......................................................................................................................................................... 269 

5.11 Fire Protection ............................................................................................................................................... 270 

5.12 Fire Alarm System ......................................................................................................................................... 271 

5.13 Plumbing ........................................................................................................................................................ 272 

5.14 Mechanical ..................................................................................................................................................... 273 

5.15 Electrical......................................................................................................................................................... 274 

5.16 Communications............................................................................................................................................ 275 

5.17 Baggage Handling System ........................................................................................................................... 276 

5.18 Security & Access Control Systems............................................................................................................ 277 

5.19 Public Information Systems ......................................................................................................................... 278 

5.20 Aviation Information Systems...................................................................................................................... 279 

5.21 Electronic Monitoring Systems.................................................................................................................... 280 

CHAPTER 6 CADD Symbols............................................................................................................................................... 281 

CHAPTER 7 References and Support Files ...................................................................................................................... 283 

7.1 Abbreviations................................................................................................................................................... 283 

7.2 Basic Electronic Layout Files......................................................................................................................... 283 

7.3 References ....................................................................................................................................................... 284 

CHAPTER 8 Geographic Information Systems (GIS)Standards and Submittal Requirements ................................... 285 

8.1 Applicability: .................................................................................................................................................... 285 

8.2 Creating GIS Features from CADD Model Files:........................................................................................... 285 

8.3 Structure and Organization of GIS Submittals: ........................................................................................... 285 

8.4 Requirements for Ensuring High Quality GIS Deliverables......................................................................... 287 

SECTION II: Aerial Photography....................................................................................................................................... 291 

CHAPTER 1 Introduction.................................................................................................................................................... 291 


Table of Contents


January 2010 

LIST OF EXHIBITS............................................................................................................................................................... 313 

INDEX ................................................................................................................................................................................... 315 


Table of Contents


January 2010 

INTRODUCTION 

GUIDE TO THIS VOLUME OF THE DESIGN MANUAL 

This volume consists of design standards, design criteria, procedures, and products for Ronald Reagan Washington 

National Airport and Washington Dulles International Airport, and relates to the General CADD Design Standards. 

This volume consists of two sections: 

Section I 

CADD Design Standards 

Chapter 1: 

Chapter 2: 

Chapter 3: 

Chapter 4: 

Chapter 5: 

Chapter 6: 

Chapter 7 

Chapter 8 

Introduction 

General Standards 

Drawing File Information 

Model File Level/Layer Assignment Tables 

Sheet File Level/Layer Assignment Tables 

CADD Symbols 

References and Support Files 

Geographic Information Systems (GIS) Standard 

Section II 

Aerial Photography 

Chapter 1: 

Introduction 


Introduction


January 2010 



Introduction


January 2010 

SECTION I: CADD Standards 

CHAPTER 1 Introduction 

This Manual is prepared for use by the Metropolitan 

Washington Airports Authority (the Authority). The Authority 

has elected to provide consultants with a resource made 

available electronically which contains the title sheet, cover 

sheet, project grid and other support files to assist in 

creating the design files and to comply with the Authority 

CADD Standards. These title and cover sheets have been 

standardized by the Authority and must match the 

distributed formats in all respects (font style, font weights, 

line weights, etc.). 

The list of CADD support files provided by the Authority to 

the A/E is given in Paragraph 7.2. Additionally, a “read me” 

file is also included for instructions on how to properly utilize 

the support files. This information can be found on the 

Design Manual CD-ROM in a subdirectory located at… 

(CD-ROM drive letter):/CAD. You may also obtain this 

information by contacting the Project Contracting Officer. 

Appendix 3, CADD Standards, is currently undergoing 

substantial revision by the Authority. Designers shall 

consult with the Authority Design Department before 

undertaking any design work incorporating CADD for the 

Authority. 

1.1.3 Autodesk AutoCAD: Version 2004 or higher 

acceptable for Structural and Building design. 

1.2 Purpose of This Manual 

1.2.1 General: The purpose of this Manual is to establish 

uniform standard policies and procedures for the design 

and drafting work within a CADD environment. The basic 

engineering and drafting techniques are not discussed. 

1.2.2 Policies: The policies established herein are for the 

information and guidance of Architects/Engineers who 

perform design services to support the Authority and 

Authority tenants. Any special condition which may require 

a variation from these requirements is subject to prior 

approval by the Authority. 

1.2.3 Standards: It is important to note that these 

standards are not static and will continue to evolve as the 

Authority requirements and technology change. The basic 

philosophy of these standards is to: 

1.2.3.1 Contract Documents: Create accurate CADD 

generated Contract Documents. 

1.2.3.2 Standardized Drawing Formats: To provide 

standardized drawing format to assist the owner in 

maintaining facilities for an extended period of time. 

1.1 CADD Software Requirements 

1.1.1 General: The Authority permits submittals in either 

of two formats. For each format, the files must be “native” 

formats, fully functional, editable, and completely useable 

within the respective software of creation noted below. It is 

not acceptable to create drawings on any other software 

other than noted below and files may not be translated from 

any other software into these formats. Formats are: 

1.1.2 Bentley Microstation: Version 8 or higher 

preferred; mandatory for civil sitework design. 

1.2.3.3 Geographic Information System (GIS) 

Submittals: To define requirements for standardized GIS 

submittals to the Authority, including required content and 

format, at appropriate points in during design and 

construction phase activities. 

1.3 Project Organization 

1.3.1 Project Structure: This section defines the project 

directory structure to be used for CADD drawings and 

various other file types. The primary Project Directory name 

should contain the following sub-directories: 

CADD Standards CADD - Page 13 Section I


January 2010 

Project 

Directory 

Resource 

Doc 

Spec 

Other 

The Project Directory contains all design files and reference files. 

The Resource Directory contains all necessary resource and configuration files 

subdivided into separate directories as required (e.g., fonts, pen tables plot files). 

The Documentation Directory contains the electronic version of all required CADD 

Documentation (e.g., word documents, spreadsheets). 

The Specifications Directory contains the final version of the projects technical 

specification. 

The Other Directory contains any miscellaneous files associated with the project 

(e.g., photos). 



January 2010 

CHAPTER 2 General Standards 

2.2 Interchangeable Terminology 

2.1 Limitations of CADD Files 

2.1.1 General: CADD files can contain text, primitive 

elements (lines, areas, and shapes), or grouped elements 

(cells, graphic groups, or complex elements). AutoCAD 

drawing files shall not contain the following elements: 

Shape symbol fonts, Rtext, OLE frame, Ray, Xline, Proxy 

objects. 

2.2.1 General: Within the various commercially available 

CADD systems, many identical or related concepts are 

given different names. To aid users of this Manual, some 

instances of related or interchangeable terminology used in 

MicroStation and AutoCAD are listed in Table I-2-1. 

TABLE I-2-1 Interchangeable Terminology 

MicroStation AutoCAD Definition 

Integer d/b 64-bit floating point d/b The method for storing drawing attribute data. 

Disk-based Memory-based Where drawing data are stored until the active file is closed. 

Auxiliary Coordinate System (ACS) 

User Coordinate System 

(UCS) 

An XYZ coordinate system where the origin is selected by the 

user. 

Active Current File or object in use. 

Cell Block Single or multiple entities grouped together to create a single 

element. 

Dimension attributes Dimensions styles Controls the appearance of dimension elements. 

.dgn .dwg A DOS-based extension for drawing files. 

Drop Explode Converts an element into multiple entities. 

Dynamic update Dragmode/rubberbanding Display of element(s) being drawn or modified as pointer/cursor 

moves on the screen. 

Element Entity A single object contained in a drawing. 

Fit Zoom all Displays all graphics currently in the drawing file. 

Global origin/design cube 

World Coordinate 

System/Origin 

Defines the location(s) of all entities in a design/drawing using 

the Cartesian coordinate system. 

Identify/accept Select/pick Entity or entities chosen for manipulation or modification. 

Image Slide A screen capture of graphics in raster format. 

Key entry field Command prompt Allows for keyboard input from users. 

Key point snap Object snap (Osnap) Controls the selection location for entities. 

Levels Layers Used as transparent overlays for display graphics. 

Line style Linetype Defines the appearance of lines. 

Linestring Polyline Connected line segments. 

Locate tolerance Pickbox Identification/selection limits for the drawing cursor. 

MDL/Visual BASIC ARX/AuoLISP System-specific command language. 

Message field Status line Displays current drawing status and/or text output from the 

application. 

Monument point Insertion point Benchmark point used to place objects in a drawing. 



January 2010 

TABLE I-2-1 Interchangeable Terminology 

MicroStation AutoCAD Definition 

Move element Move Relocation of entities. 

Patterning Hatching To fill an area within a drawing with a symbolic texture. 

Precision key in Coordinate entry User-defined XYZ values. 

Reference file External reference A design/drawing file attached to an active drawing. 

Seed file Prototype drawing A drawing design template file. 

Tentative/Data point Pointing/pick point A point within the drawing selected using a pointing device. 

Update Redraw/Regenerate Refreshes screen display. 

Model/Sheet Model/Paperspace Type or extent of a drawing file 

2.3 Target Systems 

2.3.1 General: To ensure successful translations among 

CADD applications, certain system-specific characteristics 

were considered and the standard adjusted accordingly. In 

preparing the standard, several baseline decisions were 

made: 

2.3.1.1 CADD Packages: The standard must be 

applicable to the latest release of commercially available 

CADD packages. AutoCAD and MicroStation were chosen 

based on their prevalence in the industry. 

2.3.1.2 CADD Applications: The standard is based on 

CADD applications that utilize layer/level names and 

reference files. 

2.3.1.3 Electronic Files: The standard required every 

final plotted drawing sheet to have its own separate 

electronic drawing file. 

2.3.1.4 Three-Dimensional Files: Since threedimensional 

files are not compatible with two-dimensional 

files, it is recommended that all drawings be created as 

three-dimensional files. 

2.4 Basic Drawing File Standards 

2.4.1 Drawing/Working Units: The drawing/working units 

for all civil drawings shall be set in engineering units. All 

other disciplines shall be set in architectural units. The 

required pre-v8 Bentley MicroStation working units for the 

civil design files are 12:8000 for the Washington National 

Airport and 10:1000 for the Dulles International Airport. If 

MicroStation is used for disciplines other than Civil/Site 

drawings, the working unit of 12:8000 shall be used for both 

airports. 

2.4.2 Global Origin: The global origin of the airport grid 

file has been set according to Exhibit I-2-1 and 

Exhibit I-2-2 for each airport, respectively. The user is to 

key in X, Y locations such that they are equivalent to the 

true geometric location of the data based on the airport grid. 

All elements except contours and spot elevations shall be 

placed on the Z plane of zero. Contours and spot elevations 

shall be placed on the Z plane representing the elevation. 

2.4.3 Grid System: All civil drawings must be created 

using the Decimal System and the Airport Coordinate 

System (ACS) which show all measures in decimal feet. All 

architectural plans using architectural measures shall 

reference key points to the ACS. Such designs shall 

reference a minimum of three (3) plan points to the ACS. 

This standard grid system is outlined in Exhibit I-2-1 and 

Exhibit I-2-2. The grid systems are detailed within the most 

recent version of the Ronald Reagan Washington National 

Airport Survey control network “To-Reach” Descriptions. 

The description for Ronald Reagan National Airport is 

included on the Design Manual CD-ROM. The Description 

for Washington Dulles International Airport can be obtained 

by contacting the Manager of the Washington Dulles 

International Airport Engineering Division at 703-572-2885. 



January 2010 

IAD Project Grid 

Exhibit I-2-1 



January 2010 

DCA project grid 

Exhibit I-2-2 



January 2010 

2.5 Drawing File Setup 

2.5.1 File Accuracy (Units): CADD systems allow the 

designer to work in “real world” units. The most common 

units are feet and inches, feet and tenths of feet, meters, 

and millimeters. MicroStation’s approach to file accuracy 

allows the user to set the working units (i.e., real world 

units) as the following: 

2.5.1.1 Master Units (MU): Master units (MU) = the 

largest unit that may be referred to when working in the 

design file (e.g., feet, meters). 

2.5.1.2 Subunits (SU): Subunits (SU) = Subdivisions of 

master units in the working unit definition (e.g., inches, 

millimeters). 

2.5.1.3 International Feet versus Survey Feet 

(MicroStation V8) 

International Feet: 1 foot = 0.3048000m 

US Survey Feet: 1 foot = 0.3048006m 

A. Looking at this comparison, the difference between 

the two (0.0000006 m) may seem insignificant; 

however, ultimately this difference may cause 

coordinate values to be off by several feet, resulting in 

inaccurate design files. 

B. By default, a “foot” in MicroStation actually refers to 

an International Foot. However, the coordinate system 

upon which all MWAA design work is based is 

measured in US Survey Feet. MicroStation version 8 

continues to utilize working units, which have been 

expanded to define the unit of measure (Meters, US 

Survey Feet, or International Feet). 

C. The Authority has chosen to utilize this feature in 

MicroStation to improve the accuracy in which all 

MWAA design work is created. 

D. While this is an important operational improvement, 

it has significant consequences. Therefore, care must 

be exercised to ensure and maintain the integrity of 

MicroStation DGN files with respect to the units of 

measure. In MicroStation v8, a workspace is 

accompanied by a custom units definition file (units. 

def), which defines the units of measure. To enable, 

scroll down the units.def file to the section English 

units (based on U.S. Survey Foot) and delete the # in 

front of #sf,ft, which will allow for the selection of 

Survey Feet from the Working Units box the next time 

MicroStation is started. 

2.5.1.4 Cartesian Coordinates: In AutoCAD, the basic 

drawing unit for any file is the distance between two fixed 

Cartesian coordinates. For example, the distance between 

coordinates (1,1,1) and (1,1,2) is one drawing unit. A 

drawing unit can correspond to any measurement (e.g., 

inch, foot, meter, and mile). AutoCAD users may enter the 

“Units” display option to set the desired drawing units. 

2.5.2 Origin: Positioned within every electronic drawing 

file is an origin (“global origin” in MicroStation and “origin” in 

AutoCAD). The origin of a drawing file is important because 

it serves as the point of reference from which all other 

elements are located. Origins are typically defined (located) 

in a drawing file by the Cartesian coordinate system of x, y, 

and z. The benefit of standardizing the location of the origin 

of a drawing is most notable in the use of reference files. 

Also, in certain disciplines, particularly mapping, the 

location of the origin determines the available drawing area 

(MicroStation only). A standardized origin is also helpful 

when translating files between CADD applications. The 

global origin for IAD CADD file shall be set to 0,0,0. The 

global origin for DCA shall be set at 875000, 475000, and 

2239.62. 

2.5.3 Model Files and Sheet Files: Two distinct types of 

CADD files are addressed in this standard, model files and 

sheet files. A model file contains the physical components 

of a building (e.g., columns, walls, windows, ductwork, 

piping, etc.). Model files are drawn at full scale and typically 

represent plans, elevations, section, etc. A sheet file is 

synonymous with a plotted CADD drawing file. A sheet file 

is a selected view or portion of the model file(s) within a 



January 2010 

border sheet. Sheet files are usually plotted at a particular 

scale, since the border sheet is scaled up to fit around the 

full scale model files. In other words, a sheet file is a “readyto-plot” 

CADD file. A sheet file is the combination of 

referenced model files with sheet-specific text/symbols to 

create a final “ready-to-plot” CADD file. 

2.6 Graphic Concepts 

2.6.1 Presentation Graphics: The first step in 

establishing an effective CADD standard is the 

development of a uniform approach to presentation 

graphics. Presentation graphics typically consist of drawing 

elements such as lines, arcs, shapes, text, and their 

attributes (line color, line width, and line style). This Manual 

presents brief overviews of the characteristics of 

presentation graphics and the philosophy used to 

standardize them. 

2.6.2 Line Widths: Although “monotone” line work is not 

contractually improper, varied line widths substantially 

improve readability. Most commercial CADD systems 

provide an extensive variety of line widths. However, for the 

majority of drawings, the five line widths defined in 

Table I-2-2, with the optional 1.00 mils, 1.40 mils, and 2.00 

mils lines, are considered sufficient and shall not be 

expanded unless an appreciable improvement in drawing 

clarity or contrast can be realized. The following are typical 

usages for the line widths shown in Table I-2-2: 

TABLE I-2-2 Line Widths 

Line Thickness mm in. 

MicroStation Line 

Weight 

Line Weight Example 

Fine 0.18 0.007 wt = 0 

Thin 0.25 0.010 wt = 1 

Medium 0.35 0.014 wt = 2 

Wide 0.50 0.020 wt = 3 

Extra Wide 0.70 0.028 wt = 5 

XX Wide 1.00 0.040 wt = 7 

XXX Wide 1.40 0.055 wt = 10 

XXXX Wide 2.00 0.079 wt = 15 

A. Fine (0.18 mils): Fine lines shall be used sparingly, 

mostly for poche/patterning (this line thickness typically 

does not reproduce well in blue-line format and/or in 

photocopies). 

B. Thin (0.25 mils): Thin lines shall be used for 

depicting dimension lines, dimension leader/witness 

lines, note leader line, line terminators (arrowheads, 

dots, slashes), phantom lines, hidden lines, center 

lines, long break lines, schedule grid lines, and object 

lines seen at a distance. 

C. Medium (0.35 mils): Medium lines shall be used for 

depicting minor object lines, dimension text, text for 

notes/callouts, and schedule text. 

D. Wide (0.50 mils): Wide lines shall be used for major 

object lines, cut lines, section cutting plane lines, and 

titles. 

E. Extra Wide (0.70 mils): Extra wide lines shall be 

used for minor title underlining schedule outlines, large 

titles, and object lines requiring special emphasis. For 

every large scale details drawn at 3 inches = 1 foot, 0 

inches or larger, the extra wide width shall be used for 

the object lines. Extra wide widths are also appropriate 



January 2010 

for use as an elevation grade line, building footprint, or 

top of grade lines on section/foundation details. 

F. XX Wide (1.00 mm): This line weight shall be used 

for major title underlining and separating portions of 

drawings. 

G. XXX Wide (1.40 mm): This line weight shall be 

used for border sheet outlines and cover sheet line 

work and as an option for the designer as required. 

H. XXXX Wide (2.00 mm): This line weight shall be 

used for border sheet outlines and cover sheet line 

work as an option for the designer as required. The 

predominant line types/style used in this standard are 

listed in Table 1-2-3. 

TABLE I-2-3 Standard Line Types Styles 

ID 

Description 

MicroStaton 

Designator 

AutoCAD 

Designator 

Example 

0 Continuous 0 Continuous 

1 Dotted 1 Dot 

2 Dashed 2 Hidden 

3 Dashed spaced 3 Dashed 

6 Dashed double-dotted 6 Divide2 

7 Chain 7 Center 

2.6.3 Line Color: The primary reason to use color in 

CADD drawings is to improve the clarity of the drawing on a 

computer monitor. The variety of colors available in a 

CADD application depends on the capabilities of the 

computer monitor and its video card. Today, most systems 

are capable of displaying from 16 to 256 colors. Based on 

the limitations of monitor color display capabilities and 

differing CADD system plotting methods, this Manual 

recommends that all drawings be created using the basic 

colors presented in Table I-2-4 whenever possible. 



January 2010 

TABLE I-2-4 Screen Color Comparison 

Color 

Color Number Ratios of RGB, % 

AutoCAD MicroStation Red Green Blue 

Blue 5 1 0 0 255 

Gray 8 9 128 128 128 

Green 3 2 0 255 0 

Red 1 3 255 0 0 

Yellow 2 4 255 255 0 

Magenta 6 5 255 0 255 

Cyan 4 7 0 255 255 

White 7 0 255 255 255 

Note: Color numbers for AutoCAD and MicroStation were taken from default color tables. 

Note: The recommended colors are best viewed on a monitor with a black background. 

2.6.4 Screening: 

Varying the intensity of gray scales allows users to 

distinguish different aspects of a drawing when it is plotted. 

For example, an area on a site designated for demolition 

can be assigned a color that has been assigned a 

screening percentage. Existing features shall be shown 

screened back. When plotted, the area will be shown at a 

lighter shade compared with other elements in the drawing. 

This will allow the contractor to immediately identify the 

demolition area on the drawing. Table I-2-5 lists colors 

recommended to be used for screening along with a 

recommended screening percentage. Using Table I-2-5, 

MicroStation users can edit a plotter driver, using a text 

editor, to assign a screening percentage to the specific 

colors (refer to the MicroStation user’s manuals for 

information on working with plotter/printer drivers). 

AutoCAD users must specify requirements for screening 

according to the output device used. Due to the number of 

output devices AutoCAD supports, users shall consult the 

help documentation provided within AutoCAD for 

information on assigning recommended screening 

percentages. 

TABLE 1-2-5 Screened Colors 

AutoCAD MicroStation Ratios of RGB, % 

Color Number Screen percent Color Number Screen percent Red Green Blue 

250 60 8 60 102 102 102 

251 50 200 50 128 128 128 

252 40 168 40 153 153 153 

253 30 120 30 179 179 179 

254 20 56 20 204 204 204 



January 2010 

2.6.5 Text Styles/Fonts: 

Contrasting text styles (or fonts) are used within a drawing 

to delineate types of information. In most drawings, these 

five fonts should be sufficient. 

1) Monotext Font: This font creates text 

characters that are evenly spaced. Monotext font 

shall be used where text fields need to be aligned 

such as in schedules or, in some cases, title 

blocks. Use Monospace 821 BT True Type font. 

2) Proportional Font: This font creates text where 

the characters are proportionally spaced. It is 

appropriate for general notes, labels, or title blocks. 

Use Arial True Type font. 

4) Filled Font: Filled fonts are used primarily for 

titles and on cover sheets. Use Ariblk (Arial Black) 

True Type font. 

5) Outline Font: When a pen plotter is used for 

final output, the outline font is used as a substitute 

for filled fonts for major titles such as cover sheet 

information to save plotting time. Use Swissko 

(Swiss 721 Black Outline) True Type font. 

6) NOTE: The fonts for the cover sheets and 

border sheets in the CADD support files provided 

by the Authority shall not be changed or modified. 

2.6.6 Text Height: Minimum lettering height shall be ⅛" 

on all drawings. 

3) Slanted Font: A slanted font is used where text 

needs to be easily distinguished from other text. 

Use Arial True Type font with the Slant Angle set to 

15 deg to achieve the American Standard slope of 

2 in 5 (68.2 deg). 

2.6.6.1 Table I-2-6 is provided for general information 

regarding text size and its correlation to drawing scale. Text 

should be clear, organized and legible at half-size plot. 

TABLE I-2-6 Inch-pound Text Sizes and Line Type Scales 

Scale Text Sizes Line Type Scale 

Drawing Scale = 1" = 2000' - 0" 250’ 24000 

Drawing Scale = 1" = 1000' - 0" 125’ 12000 

Drawing Scale = 1" = 500' - 0" 62.5’ 6000 

Drawing Scale = 1" = 400' - 0" 50’ 4800 

Drawing Scale = 1" = 200' - 0" 25’ 2400 

Drawing Scale = 1" = 100' - 0" 12.5’ 1200 

Drawing Scale = 1" = 60' - 0" 7.5’ 720 

Drawing Scale = 1" = 50' - 0" 6.25’ 600 

Drawing Scale = 1" = 40' - 0" 5’ 480 

Drawing Scale = 1" = 30' - 0" 3.75’ 360 

Drawing Scale = 1" = 20' - 0" 2.5’ 240 

Drawing Scale = 1" = 10' - 0" 1.25’ 120 

Drawing Scale = 1" = 5' - 0" 7.5” 60 

Drawing Scale = 12” = 1’ – 0” or FULL SIZE 0.125” 1 

Drawing Scale = 6" = 1' - 0" 0.25” 2 



January 2010 

TABLE I-2-6 Inch-pound Text Sizes and Line Type Scales 

Scale Text Sizes Line Type Scale 

Drawing Scale = 3" = 1' - 0" 0.50” 4 

Drawing Scale = 1-1/2" = 1' - 0" 1” 8 

Drawing Scale = 1" = 1' - 0" 1.5” 12 

Drawing Scale = 3/4" = 1' - 0" 2” 16 

Drawing Scale = 1/2" = 1' - 0" 3” 24 

Drawing Scale = 3/8" = 1' - 0" 4” 32 

Drawing Scale = 1/4" = 1' - 0" 6” 48 

Drawing Scale = 3/16" = 1' - 0" 8” 64 

Drawing Scale = 1/8" = 1' - 0" 12” 96 

Drawing Scale = 3/32" = 1' - 0" 16” 128 

Drawing Scale = 1/16" = 1' - 0" 24” 192 

Drawing Scale = 1/32" = 1' - 0" 48” 384 

2.6.7 Drawing Orientation and North Arrow 

2.6.7.1 The orientation of all plans should be positioned so 

that the sides of buildings or pavement edges are aligned 

with sheet edges, in most cases. The most common 

orientation is one where the north arrow points to the top or 

to the left of the drawing block. 



January 2010 

2.6.7.2 The display of information in the drawing should be 

consistent in orientation throughout the drawing set. See 

figure below. 



January 2010 

2.6.8 Text Orientation: 

2.6.8.1 Line Spacing: Line spacing will be ½ of the text 

height. 

2.6.8.2 Leader Lines: Leader lines shall be line strings 

with an arrow terminator. Leader lines that terminate to the 

left should start at the center of the first line of text. Leader 

lines that terminate to the right should start at the center of 

the last line of text. 

2.6.8.3 Terminators: The approved line terminator for 

notes on all construction documents is the standard filled 

terminator in the dimension settings. The size of the filled 

terminators is a width of .5 and length of 1.5 x the height. 



January 2010 

2.6.9 Dimension Terminators: The approved line 

terminator for dimensions on all construction documents is 

the standard filled terminator in the dimension settings. The 

size of the filled terminators is a width of .5 and length of 

1.5 x the text height. 

2.6.10 Abbreviations: Abbreviations used shall conform 

to the United States National CAD Standard CSI Uniform 

Drawing System Module 5, "Terms and Abbreviations." 

Unusual or uncommon abbreviations required on drawings, 

not specified by the National Standard, shall be clearly 

noted and defined on the G series of drawings. 

2.7 Level/Layer Assignments 

2.7.1 Levels/Layers: CADD levels or layers are 

analogous to overlays in manual drafting systems and 

serve to separate graphic elements (lines, shapes, and text) 

according to the design discipline they represent. The types 

of information represented by individual levels/layers can be 

grouped into two (2) primary types: model-specific 

information and sheet-specific information. Model-specific 

information represents the physical form of a site, a 

building, or objects composing a building. This information 

is often shared between drawings. Examples include walls, 

doors, light fixtures, and room numbers. Model-specific 

information may be either literal (e.g., walls) or symbolic 

(e.g., electrical outlets). Sheet-specific information may 

include notes, annotative symbols, and titles. This type of 

information is usually not shared between drawings. To use 

and manipulate model-specific and sheet-specific 

information effectively, every level/layer must be defined 

(standardized) by its name and its use. 

2.7.2 Level/Layer Naming Convention: The reuse, not 

duplication, of graphic information reduces drawing time 

and improves project coordination. The level/layer is the 

basic tool used in CADD for managing graphic information. 

Level/layer names consist of a two-character Discipline 

Designator (e.g., “AR-” for Architectural, “ME-” for 

Mechanical), followed by a four-character Major Group 

(e.g., “DOOR” for Doors, “LITE” for Lighting Fixtures), and 

followed by a four-character Minor Group (e.g., 

AR-WALL-FULL-EXTR for exterior full height walls versus 

AR-WALL-FULL-INTR for interior full height walls). 

2.7.3 Model Files: Model files represent full-size drawings 

of building elements, systems, or information (e.g., the 

mechanical HVAC system, the architectural floor plan, 

details, and sections) and sheet files represent final plotted 

sheets. Model files are used as components in creating 

plotted sheet files. The information contained within a 

model file for a discipline may be referenced by other 

disciplines to create the particular model files or sheet files 

for that discipline. A model file can be considered a “work in 

progress.” For instance, a mechanical engineer may 

reference the architect’s floor plan model file to begin 

development of the HVAC ductwork layout model file. 

Meanwhile, the architect can continue developing the floor 

plan to meet new requirements. Any changes to the floor 

plan would be immediately accessible to the mechanical 

engineer. The viewing of real-time updates eliminates a 

great deal of frustration for other disciplines because it 

allows for on-the-spot rather than after-the-fact 

modifications. 

2.7.4 Level/Layer Assignment Tables - Model Files: 

The level/layer assignment tables in Section 4.1 present 

the following: 

2.7.4.1 Level/Layer Names: The level/layer names 

assigned to each model file. 

2.7.4.2 Description: A detailed description for each 

level/layer. 

2.7.4.3 Presentation Graphics: The presentation 

graphics associated with each level/layer. This includes the 

line style, line width, and color. 

2.7.4.4 Annotation Levels/Layers: Users should note 

that the first eight level/layers for every model file type (with 

the exception of detail model file types) are the same, the 

only difference being that the Discipline Designator 

changes depending on the discipline for that model file 

type. The unique function of these eight annotation 



January 2010 

levels/layers is to contain model-specific information that 

might not be required by other disciplines. These 

levels/layers are as follows with ** representing a Discipline 

Designator (e.g., AR-, CV-): 

**ANNO-DIMS 

Witness/extension lines, dimension terminators and 

dimension text. 

**ANNO-KEYN 

Reference keynotes with associated leaders. 

**ANNO-NOTE 

General notes and remarks. 

**ANNO-NPLT 

Non-plotting graphic information. 

Demolition - phase 3. 

These levels/layers should only be used when an 

Existing/Demolition model file is being created. For 

instance, the architect or engineer will sometimes have 

existing as-built model files, such as Site Plans and Floor 

Plans from a previous project. A copy of the as-built file will 

be made for use in the current project. This copy is 

renamed to be the Existing/Demolition Plan model file for 

that discipline. In order to distinguish items to be 

demolished from existing items that will remain, those items 

should be moved to the Demolition levels/layers (if the 

demolition is not phased, all items should be moved to the 

**STAT-DEMO-PHS1 level/layer). When the 

Existing/Demolition Plan model file is referenced into a new 

file to create the New construction items, the Demolition 

levels/layers would be turned off. 

**ANNO-PATT 

Miscellaneous patterning and hatching. 

**ANNO-SYMB 

Miscellaneous symbols. 

**ANNO-TEXT 

Miscellaneous text and callouts with associated leaders. 

2.7.5 Border Sheets: A model file contains information 

that can be referenced by other disciplines to create other 

model files or final sheet files. A border sheet model file 

contains border sheet linework, the title block, and projectspecific 

symbols and text. Typically, each discipline will use 

the same border sheet and fill in sheet-specific information 

within the title block or revision block prior to printing the 

final sheet (e.g., sheet number, designer names). 

**ANNO-REFR 

An AutoCAD user-specific layer for use in attachment of 

external references (i.e., reference files). 

2.7.4.5 Demolition Levels/Layers: Users should note 

that several model files have three levels/layers reserved 

for demolition items. These levels/layers are as follows with 

** representing a Discipline Designator (e.g., AR-, CV-): 

**STAT-DEMO-PHS1 





2.7.6 Reference Files: The use of reference files is a key 

component in the successful use of the level/layer 

assignments. To create either a model file or a final sheet 

file, multiple referenced model files may be required. 

2.7.7 Sheet Files: Sheet files are the final project sheets 

that are ready to be plotted. A sheet file is an assembly of 

referenced model files plus additional sheet-specific 

information (e.g., north arrows, scales, section cuts, title 

block information). Referenced model files are used in the 

construction of sheet files. The user opens the sheet file 

type that is appropriate to his/her discipline then references 

existing model files. The user then “turns on/off” 

levels/layers within each referenced model file to achieve 

the desired sheet file. The user then fills in the specific 

sheet/border information. Once the final sheet file is 



January 2010 

achieved, the resulting file is saved (with all reference files 

attached). Note: All sheet file backfround color shall be set 

to "black". 

2.7.8 Level/Layer Assignment Tables - Sheet Files: The 

level/layer assignment tables in Section 5.1 present the 

following: 

2.7.8.1 Level/Layer Names: The level/layer names 

assigned to each sheet file. 

2.7.8.2 Description: A detailed description for each 

level/layer. 

2.7.8.3 Presentation Graphics: The presentation 

graphics associated with each level/layer. This includes the 

line style, line width, and color. 

2.7.8.4 Users should note that the first ten level/layers of 

the sheet file type for every discipline are the same, with the 

exception that the Discipline Designator changes 

depending on the discipline for that sheet file type. The 

unique function of these ten Annotation levels/layers is to 

contain sheet-specific information. These levels/layers are 

as follows with ** representing a Discipline Designator (e.g., 

AR-, CV-): 

**ANNO-DIMS 

Sheet-specific witness/extension lines, dimension 

terminators, and dimension text. 

**ANNO-REDL 

Redlines, markups. 

**ANNO-REVS 

Revisions, amendments, addenda, and modifications. 

**ANNO-SYMB 

Sheet-specific symbols (e.g., north arrow, scales). 

**ANNO-TEXT 

Sheet-specific text and callouts with associated leaders. 

**ANNO-REFR 

An AutoCAD user-specific layer for use in attachment of 

external references (i.e., reference files). 

2.8 Compiling CADD features in Model Files 

2.8.1 CADD Manual, Section I, paragraph 8.4 provides a 

set of required practices A/Es and contractors must follow 

when compiling features in CADD model files to facilitate 

GIS integration and to prepare GIS submittals, as described 

further in Chapter 8. A/Es are required to adhere to the 

guidance in Section 8.4, including guidance on use of 

complex versus simple geometry types, topological 

integrity, rules for compiling line and area/polygon features, 

use of custom and continuous linestyles, rules for block and 

cell insertion points and guidelines for snapping blocks and 

cells to lines and line endpoints. 

2.9 Drawing Output 

**ANNO-KEYN 

Sheet-specific keynotes with associated leaders. 

**ANNO-LEGN 

Legends and schedules. 

**ANNO-NOTE 

Sheet-specific general notes and remarks. 

**ANNO-PATT 

Sheet-specific patterning and hatching (e.g., key plan 

patterning). 

2.9.1 The final plot size for drawings shall be established 

according to the Design Manual; refer to the Authority 

Design Manual, Section II, Paragraph 2.7.4. 

2.9.2 All plotted drawings shall bear the file name, date and 

time of the plot within cutline limits. 

2.9.3 A drawing log shall be kept to track the file name of 

all design files created. This log shall contain a detailed 

description of each file structure; including reference file 

names, model/base file names, pen tables, and any 

additional support files which are required to produce a 



January 2010 

finished plot of the drawing. This shall be an MS Excel file 

which is kept in the project directory and archived with the 

design files when the electronic data is delivered to the 

Authority. 

2.10 Deliverables, Data Exchange and Media Format 

2.10.1 Plots of all drawings shall be provided in 

accordance with the Design Manual Section II, Paragraph 

2.7. 

2.10.2 Interim drawing submittals shall be as outlined 

within the Design Manual Section II, Paragraph 2.5, and 

the Statement of Work. 

2.10.3 Delivery Media: All CADD files shall be furnished 

via compact disc-read only memory (CD-ROM) or DVD, 

and not on multiple diskettes. 

2.10.4 Format: All digital files shall be delivered in a 

format that is directly readable and compatible with the 

installation’s CADD software and platforms without 

conversion. Before a file is placed on the delivery digital 

media, the following procedures shall be performed: 

2.10.4.1 Extraneous Graphics: Remove all extraneous 

graphics outside the border area, and set the active 

parameters to a standard setting or those in the 

seed/prototype file. 

2.10.4.5 Support Files: Ensure that all support files are in 

the same directory and that references to those files do not 

include device or directory specifications. 

2.10.4.6 Standard Sheets: Include any standard sheets 

(i.e., abbreviation sheets, standard symbol sheets, etc.) 

necessary for a complete project. 

2.10.5 Documentation: Complete documentation (e.g., 

data input procedures), pen settings, lock settings, 

reference files, cells, level assignments, and history (e.g., 

when developed/modified) information for each file shall be 

included on level/layer **-ANNO-NPLT (** represents the 

design discipline). Documentation of the plot for each 

drawing is needed to duplicate the plot at a later date and 

shall be provided with the deliverables. 

2.10.6 Consultants must label all compact disks with the 

following information: 

Project Title 

Consultant Name and Contract Number 

Airport and Project Name 

Submittal Date 

Submittal Level 

Sequence number (for multiple CD’s) 

A short description of the contents 

Contact Phone Number and Name 

Tenant Name (if Applicable) 

2.10.4.2 Directory Specifications: Ensure all reference 

(external reference) files are attached without device of 

directory specifications. 

2.10.4.3 Compression: Compress and reduce all files 

using the appropriate utilities. 

2.10.6.1 In addition, the following information shall 

accompany the media: 

A. Transmittal sheet 

B. QC CADD Sheet 

2.10.4.4 Files: Include all files, both graphic and 

nongraphic, required for the project (e.g., color tables, pen 

tables, font libraries, cell/block libraries, user command 

files, plot files, etc.). 

C. MS Excel Spreadsheet listing file names and file 

descriptions 



January 2010 

2.11 Submittal Requirements 

2.11.1 General: Consultants shall submit drawings in 

compliance with the Authority CADD Standard with each 

required submittal. At 100% submittal level, all CADD 

drawings shall be submitted to include model files, sheet 

files, reference files and any other files required by 

Paragraph 2.9. 



January 2010 




January 2010 

CHAPTER 3 Drawing File Information 

3.4 Quality Check (QC) CADD Checklist 

3.1 Naming Conventions 

3.1.1 Model File Naming: Model files shall be named in 

accordance with the naming convention outlined in the 

applicable chapter exhibits. 

3.1.2 Sheet File Naming: Sheet files shall be named in 

accordance with the naming convention outlined in chapter 

exhibits. In assigning a sheet number, the sheet number 

shall coordinate with the same name assigned to the 

electronic sheet file. 

3.2 Standard Sheet Formats (Cover Sheet and Title 

Block Sheet) 

3.2.1 General: The standard format of Cover Sheets and 

Title Block Sheets are shown in the applicable chapter 

exhibits. The Authority will provide files of the cover 

sheets and title block sheets in native electronic format for 

Bentley MicroStation and AutoDesk AutoCAD. 

3.4.1 General: The QC CADD checklist is shown on page 

45. This checklist is used as a means of validating the 

CADD files submitted have been quality inspected. An “X” 

in the appropriate YES or NO field, with a signature, 

indicates this item is in conformance with the items outlined 

in the Design Manual Appendix 3 CADD Standards. This 

QC CADD checklist shall be accompanied with each 

submittal and may be submitted as a hard copy or 

electronic file. The QC CADD Checklist is available on the 

CD-ROM located in the CAD directory. 

3.5 Addenda Sketches 

3.5.1 Sketch Format: The standard format of 8 ½" x 11" 

or 11" x 17" sketches are shown in chapter exhibits. The 

Authority will provide files of the sketch formats in native 

electronic format for Bentley MicroStation and AutoDesk 

AutoCAD. It is the obligation of each designer to ensure 

that all submittals match the hard-copy line work and 

graphics exactly as shown. Any deviation will be rejected. 

3.3 Drawing Preparation/Arrangement 

3.3.1 General: The title block sheets and cover sheets 

shall be referenced into the CADD file. They shall not be 

placed as a separate cell or block. The use of reference 

files in the file set-up is required to ensure file integrity. The 

use of reference files eliminates the need for duplication of 

data reducing the problems encountered when updating 

drawings. Sheet drawings shall be arranged in sequence as 

defined in Table I-3-1. 

3.5.2 File Naming Conventions for Addenda or 

Sketches: Model files and all drawing sheet files shall be 

named in accordance with the Name designation 

convention outlined in the applicable chapter exhibits. In 

assigning a sheet number, the sheet number shall 

coordinate with the same name assigned to the electronic 

sheet file. 

3.3.2 Reference Files: In order to avoid conflicting 

attachments of reference files, there shall be no duplicate 

file names within the project directory structure or copies of 

the same file within the project directory structure. 



January 2010 

Model File Naming Convention 

Exhibit I-3-1 



January 2010 

Sheet File Naming Convention 

Exhibit I-3-2 



January 2010 

Addendum File Naming Convention 

Exhibit I-3-3 



January 2010 

Authority Standard Drawing Sheet Titleblock For IAD 

Exhibit I-3-4 



January 2010 

Authority Standard Cover Sheet For IAD 

Exhibit I-3-5 



January 2010 

Authority Enlarged Plan Sheet For IAD 

Exhibit I-3-6 



January 2010 

Authority Standard Drawing Sheet Titleblock For DCA 

Exhibit I-3-7 



January 2010 

Authority Standard Cover Sheet For DCA 

Exhibit I-3-8 



January 2010 

Authority Standard Addenda or Sketches Sheet 

Exhibit I-3-9 



January 2010 

PROJECT IDENTIFIER 

PROJECT 

DATE 

ITEMS YES NO 

1. Are the base/model files provided? 

2. Is the base file correctly located within the Airport Coordinate System (ACS)? 

3. Are sheet numbers and drawing numbers indicated, as well as correctly shown? 

4. Are the files drawn to scale and measurements correct? 

5. Is text displayed correctly? 

6. Is the proper documentation and support files provided? 

7. Are the CADD files saved as 3D files? 

8. Are the title and standard title block sheet formats to Authority standards? 

9. Are the appropriate leveling schemes being used as outlined in the CADD Standard? 

10. Is the CADD file identical in appearance to the hard copy? 

11. Is the CD-ROM labeled correctly? 

12. Are the file naming conventions in accordance for the model and sheet files? 

13. 

Are all CADD files and disciplines present as outlined in the Drawing Index, including 

reference files? 

14. Is the information contained inside the drawing border the only information in the file? 

15. Does one CADD file contain only one drawing? 

Have 30%-60%-90%-100% (circle one) Submission CADD files been submitted in acceptable format per the Design 

Manual? 

Yes 

No 



January 2010 

TABLE I-3-1 

Discipline/Subject Numbering Breakdown and Drawing Set Organization (For Reference Only) 

*Note: No changes are permitted in the series numbering; however, additions (i.e., GN5, GN6 or CN11, CN12 

etc.) may be proposed by A/Es for consideration by the Authority 

General: 

GN00.series Cover Sheet 

GN01.series Drawing Index 

GN02.series Plot/Vicinity Locations, Haul Routes, 

Contractor Staging Area 

GN03.series Construction Phasing Plans, 

Maintenance of Traffic 

GN04.series Building Code Analysis and 

Egress Analysis 

Hazardous Materials: 

HM00.series General Notes, Abbreviations, and 

Symbols 

HM01.series Site Plan 

HM02 series Petroleum Contaminated Soil, Gravel 

& Water from Demolition Activities 

HM03.series Petroleum Contaminated Soil, Gravel 

& Water from Utility Construction Activities 

HM04.series Asbestos Containing Material (ACM) 

HM05.series PCB Hazardous Materials 

HM06.series Soil Stockpile Details/Details 

HM07.series Other Hazardous Materials 

Civil: 

CV00.series General Notes, Abbreviations, and 

Symbols, Survey Controls 

CV01.series Site Plans 

CV02.series Demolition Plans 

CV03.series Sitework/Grading Plans/Profiles/Storm 

Water Pollution Control Plans 

CV04.series Pavement Sections 

CV05.series Typical Details, Drainage Details 

CV06.series Utility Plans 

CV07.series Utility Profiles/Sections 

CV08.series 

CV09.series 

CV10.series 

Fueling Systems: 

FU00.series 

FU01.series 

FU02.series 

FU03.series 

FU04.series 

FU05.series 

FU06.series 

Landscape: 

LA00.series 

LA01.series 

LA02.series 

LA03.series 

LA04.series 

LA05.series 

LA06.series 

LA07.series 

LA08.series 

LA09.series 

LA10.series 

Utility Details 

Boring Plans/Logs 

Geotechnical 

General Notes, Abbreviations, and 

Symbols 

Site Plans 

Demolition Fuel Utility Plans 

Fuel Utility Plans 

Fuel Utility Profiles/Sections 

Fueling System Details/Schedules 

EFSO System Plans/Risers/Details 

General Notes, Abbreviations, and 

Symbols 

Site Plan 

Demolition Plans, Plant Removal 

Plans 

Landscape/Planting Plans 

Elevations 

Landscape Sections 

Irrigation Plans 

Irrigation Details 

Typical Details, Drainage Details 

Plant Schedules 

User Defined 

Structural Civil (Bridges & Tunnels): 

SC00.series General Notes, Abbreviations and 

Symbols 

SC01.series Site Plan 

SC02.series Demolition Plans, Temporary Work, Rock 



January 2010 

Support Distribution or Support of 

Excavation 

SC03.series Key Drawings, Foundation, Retaininig 

Walls, Instrumentation and Monitoring 

Plans, and Details 

SC04.series Approach Slabs, Decks, Plan and Profiles 

SC05.series Elevations, Longitudinal Sections 

SC06.series Sections and Details 

SC07.series Columns and Bents 

SC08.series Misc. Details, Waterproofing Details 

SC09.series Schedules, Installation Procedures and 

Sequence 

Structural (Buildings): 

ST00.series General Notes, Abbreviations and 

Symbols 

ST01.series Site Plans 

ST02.series Demolition Plans, Temporary Work 

ST03.series Key Drawings, Foundation and 

Framing Plans 

ST04.series Typical Details 

ST05.series Foundation, Wall Details 

ST06.series Sections and Details 

ST07.series Lagteral Bracing, Special Items 

ST08.series Misc. Details 

ST09.series Schedules 

Architectural: 

AR00.series General Notes, Abbreviations and 

Symbols 

AR01.series Site Plan 

AR02.series Demolition Plans & Temporary Work 

AR03.series Key Drawings. Plans: Floor, Roof, 

Reflected Ceiling 

AR04.series Detailed Floor Plans 

AR05.series Elevations: Exterior, Interior 

AR06.series Sections: Building, Walls 

AR07.series Vertical Circulation, Stairs, Elevators, 

Escalators 

AR08.series Details: Exterior, Interior 

AR09.series Schedules: Finish, Doors 

Interiors: 

IN00.series 

IN01.series 

IN02.series 

IN03.series 

IN04.series 

IN05.series 

IN06.series 

IN07.series 

IN08.series 

IN09.series 

Equipment: 

EQ00.series 

EQ01.series 

EQ02.series 

EQ03.series 

EQ04.series 

EQ05.series 

EQ06.series 

EQ07.series 

EQ08.series 

EQ09.series 

General Notes, Abbreviations and 

Symbols 

Location Plan 

Demolition 

Key drawings, Plans: Floor, Furnishing 

Reflected Ceilings 

Detailed Floor Plans 

Elevations 

Sections 

User Defined 

Details 

Schedules 


Symbols 

Site Plan, Work Outside of Building 

Demolition Plans, Temporary Work 

Key Drawings, Plans: Floor 

Detailed Floor Plans, Casework 

Elevations 

Sections 

Riser and Single-line Diagrams for 

Sub-Ups 

Details 

Schedules: Finish, Devices 

Fire Protection: 

FP00.series General Notes, Abbreviations and 

Symbols 

FP01.series Site Plan 

FP02.series Demolition Plans 

FP03.series Floor Plans 

FP04.series Riser Diagrams 

FP05.series Piping Flow Diagrams 

FP06.series Details 

FP07.series Fire Protection Coverage Zones 

FP08.series User Defined 



January 2010 

Fire Alarm System: 

FA00.series General Notes, Abbreviations and 

Symbols 

FA01.series Site Plan, Work Outside of Building 

FA02.series Demolition Plans 

FA03.series Floor Plans 

FA04.series Riser and Single-Line Diagrams 

FA05.series Details 

FA06.series Device Schedules 

FA07.series Alarm Panel Schedules 

FA08.series Fire Alarm Zone Diagrams 

FA09.series User Defined 

Plumbing: 

PL00.series General Notes, Abbreviations and 

Symbols 

PL01.series Site Plan 

PL02.series Demolition Plans 

PL03.series Floor Plans 

PL04.series Details 

PL05.series Elevations 

PL06.series Sections 

PL07.series Riser Diagrams 

PL08.series Schedules 

PL09.series User Defined 

Mechanical: 

ME00.series General Notes, Abbreviations and 

Symbols 

ME01.series Site Plan 

ME02.series Demolition Plans 

ME03.series Floor Plans 

ME04.series Details 

ME05.series Elevations 

ME06.series Sections 

ME07.series Floor/Riser Diagrams 

ME08.series Control Diagrams 

ME09.series Equipment Schedules 

ME10.series Building Automation and Controls 

ME11.series Instrument Loop Diagrams 

ME12.series 

ME13.series 

Electrical: 

EL00.series 

EL01.series 

EL02.series 

EL03.series 

EL04.series 

EL05.series 

EL06.series 

EL07.series 

EL08.series 

EL09.series 

EL10.series 

EL11.series 

Communications: 

CO00.series 

CO01.series 

CO02.series 

CO03.series 

CO04.series 

CO05.series 

CO06.series 

CO07.series 

CO08.series 

CO09.series 

CO10.series 

Baggage Handling System: 

Process Drawings 

User Defined 


Symbols 

Site Plan 

Demolition Plans 

Lighting Plan 

Power Plans 

Grounding Plans 

Single-Line Diagrams 

Details 

Elevations 

Fixture/Panel Schedules 

Electrical System Controls 

User Defined 


Symbols 

Site Plans 


Systems Floor Plans 

Riser and Single-line Diagrams 

Details 

Elevations 

Device Schedules 

Panel Schedules 

Wiring Identification Schedules 

User Defined 

BG00.series General Notes, Abbreviations and 

Symbols 

BG01.series Site Plan, Work Outside of Building 

BG02.series Demolition Plans 

BG03.series Floor/Conveyor Plans 

BG04.series Detail Plans and Sections and 



January 2010 

Details 

BG05.series Sections 

BG06.series Elevations 

BG07.series Device Subsystem Layouts 

BG08.series Device Schedules 

BG09.series Controls Details 

BG10.series Control Panel Schedules 

BG11.series User Defined 

Graphics and Signage System: 

GR00.series General Notes, Abbreviations and 

Symbols 

GR01.series Site Plan, Work Outside of Building 

GR02.series Demolition Plans 

GR03.series Floor Plans 

GR04.series Detailed Sign Face Message Layouts 

GR05.series Details 

GR06.series Elevations 

GR07.series Sign Message Schedules 

GR08.series Sign Type Details/Substrate Schedules 

GR09.series Sign Type/Substrate Schedules 

GR10.series Wiring/Lighting Diagrams and 

Schedules 

GR11.series User Defined 

Security and Access Control System: 

PS00.series General Notes, Abbreviations and 

Symbols 

PS01.series Site Plan, Work Outside of Building 

PS02.series Demolition Plans 

PS03.series Floor Plans 

PS04.series Details 

PS05.series Elevations 

PS06.series Riser and Single-line Diagrams 

PS07.series Device Schedules 

PS08.series Panel Schedules 

PS09.series Wiring Identification Schedules 

PS10.series User Defined 

Aviation Information System: 

AS00.series General Notes, Abbreviations. and 

Symbols 

AS01.series Site Plan, Work Outside of Building 

AS02.series Demolition Plans 

AS03.series Floor Plans 

AS04.series Riser and Single-line Diagrams 

AS05.series Details 

AS06.series Elevations 

AS07.series Device Schedules 

AS08.series Panel Schedules 

AS09.series Wiring Identification Schedules 

AS10.series User Defined 

SS00.series General Notes, Abbreviations and 

Symbols 

SS01.series Site Plan, Work Outside of Building 

SS02.series Demolition Plans 

SS03.series Floor Plans 

SS04.series Details 

SS05.series Elevations 

SS06.series Riser and Single-line Diagrams 

SS07.series Device Schedules 

SS08.series Panel Schedules 

SS09.series Wiring Identification Schedules 

SS10.series User Defined 

Public Information System: 

Electronic Monitoring System: 

ES0.series General Notes, Abbrev. and Symbols 

ES1.series Site Plan, Work Outside of Building 

ES2.series Demolition Plans 

ES3.series Floor Plans 

ES4.series Riser and Single-line Diagrams 

ES5.series Details 

ES6.series Elevations 

ES7.series Device Schedules 

ES8.series Panel Schedules 

ES9.series Wiring Identification Schedules 

ES10.series User Defined 

Wireless & Radio System: 



January 2010 

WS01.series 

WS02.series 

WS03.series 

WS04.series 

WS05.series 

WS06.series 

WS07.series 

WS08.series 

WS09.series 

WS10.series 

Site Plan, Work Outside of Building 


Floor Plans 

riser and Single-line Diagrams 

Details 

Elevations 

Devices Schedules 

Panel Schedules 

Wiring Indentification Schedules 

User Defined 



January 2010 

CHAPTER 4 Model File Level/Layer Assignment Tables 

4.1 General 

The following pages include naming conventions, level assignment sheets and cell library documentation that supports 

the development of sheet files and model files. 

4.2 Naming Conventions – Model Files and Level/Layer Tables 

Table I-4-1 

Discipline Designators 

General 

Discipline 

Hazardous Materials 

Civil 

Fueling Systems 

Landscape 

Structural Civil (Bridges & Tunnels 

Structural (Building) 

Architectural 

Interiors 

Equipment 

Fire Protection 

Fire Alarm System 

Plumbing 

Mechanical 

Electrical 

Communications 

Baggage Handling System 

Graphics & Signage System 

Security & Access Control System 

Public Information System 

Aviation Information System 

Electronic Monitoring System 

Wireless & Radio System 

Designator 

GN 

HM 

CV 

FU 

LA 

SC 

ST 

AR 

IN 

EQ 

FP 

FA 

PL 

ME 

EL 

CO 

BG 

GR 

SS 

PS 

AS 

ES 

WS 

Table I-4-2 Model File Types 

Discipline Code Definition 

General 

BS* Border Sheet 

KP* Keyplan 


DT Detail 

EL Elevation 

LG* Legend 

PP* Pollution Prevention Plan 

SC Section 

XD* Existing/Demolition Plan 

Civil 

AF* Airfield Plan 

AM* Airfield Pavement Marking Plan 

CP* Channel Plan 

DT Detail 

EC* Erosion Control Plan 

EL Elevation 

FU* Liquid Fuel Utilities Plan 

GP* Grading 

IP* Installation Plan/Base Map 

IW* Industrial Waste Water Plan 

JP* Joint Layout Plan 

KP* Staking Plan 

LG* 

NG* 

PL* 

PR* 

Legend 

Natural Gas Utilities Plan 

Project Location Map 

Profile 



January 2010 





SC 

Section 

NP* 

Foundation Plan 

SH 

Schedule 

SC 

Section 

SP 

Site Plan 

SH 

Schedule 

SS* 

Sanitary Sewer Plan 

XD* 

Existing/Demolition Plan 

ST* 

TS* 

WA* 

XD* 


Storm Sewer Plan 

Transportation Site Plan 

Domestic Water Plan 


Architectural 

3D 

AC* 

CP* 

DT 

Isometric/3D 

Area Calculations/Occupancy Plan 

Reflected Ceiling Plan 

Detail 

DG 

Diagram 

EL 

Elevation 

DT 

Detail 

EP* 

Enlarged Plan 

EL 

Elevation 

FP 

Floor Plan 

EP* 

Enlarged Plan 

LG* 

Legend 

LG* 

Legend 

QP 

Equipment Plan 

PP* 

Piping Plan 

RP* 

Roof Plan 

SH 

Schedule 

SC 

Section 

XD* 


SH 

Schedule 

Landscape 

XD* 


DT 

Detail 

Interiors 

EL 

Elevation 

3D 

Isometric/3D 

IP* 

Irrigation Plan 

DT 

Detail 

LG* 

Legend 

EL 

Elevation 

LP* 

Landscape Plan 

EP* 

Enlarged Plan 

SC 

Section 

LG* 

Legend 

SH 

Schedule 

QP 


XD* 


RP* 

Furniture Plan 

Structural 

SC 

Section 

3D 

Isometric/3D 

SH 

Schedule 

CP* 

Column Plan 

SP* 

Signage Placement Plan 

DT 

Detail 

WP* 

System/Prewired Workstation Plan 

EL 

Elevation 

XD* 


EP* 

Enlarged Plan 


FP* 

Framing Plan 

DG 

Diagram 

LG* 

Legend 

DT 

Detail 

NB* 

Non-Building Structures Plan 

FA* 

Fire Alarm/Detection Plan 



January 2010 



FP* Fire Suppression Plan 

LG* Legend 

LP* Life Safety Plan 

SH Schedule 


Plumbing 

DG Diagram 

DT Detail 

EL Elevation 

EP* Enlarged Plan 

LG* Legend 

PP* Piping Plan 

SH Schedule 


Mechanical 

3D Isometric/3D 

DG Diagram 

DT Detail 

EL Elevation 

EP* Enlarged Plan 

HP* HVAC Plan 

HT* HTCW Utilities Plan 

LG* Legend 

MD* Machine Design Plan 

MH* Material Handling Plan 

PP* Piping Plan 

QP Equipment Plan 

SC Section 

SH Schedule 

SP* Specialty Piping Plan 


Electrical 

AL* 

AP* 

CP* 

DG 

DT 

EU* 

GP* 

LG* 

LP* 

PP* 

SH 

SS* 

XD* 

Telecommunications 

DG 

DT 

LG* 

SH 

TP* 

XD* 

* = Not in NCS 2.0 

Airfield Lighting Plan 

Auxiliary Power Plan 

Exterior Communication Systems 

Plan 

Diagram 

Detail 

Electrical Utilities Plan 

Grounding System Plan 

Legend 

Lighting Plan 

Power Plan 

Schedule 

Special Systems Plan 


Diagram 

Detail 

Legend 

Schedule 

Telephone/Data Plan 




January 2010 

4.3 Level/Layer Assignment Tables – Model Files 

This chapter provides the level/layer assignment tables: 

General: 

Border Sheet 

Cover Sheet 

Keyplan 


Demolition Plan 

Pollution Prevention Plan 

Sections 

Details 

Civil 


Site Plan 

Grading Plan 

Eco-Restoration Plan 

Shore Bankline 

Navigation Dredging Plan 

Flood Control Plan 

Transportation Site Plan 

Joint Layout Plan 

Airfield Plan 

Utilities Plan 

Profiles 

Elevations 

X-Sections 

Details 

Structural Buildings 


Foundation Plan 

Framing Plan 

Column Plan 

Elevations 

Sections 

Details 

Structural Civil 

Substructure 

Decks 

Superstructure 

Elevations 

Sections 

Details 

Architectural 


Floor Plan 

Reflected Ceiling Plan 

Roof Plan 


Area Calculations/Occupancy Plan 

Elevations 

Sections 

Details 



Piping Plan 

Details 

Riser Diagrams 

Landscape 


Landscape Plan 

Irrigation Plan 

Details 

Interiors 


Furniture Plan 

System Furniture Workstation Plan 

Signage Placement Plan 

Floor Patterns 

Elevations 

Details 



January 2010 



Life Safety Plan 

Fire Suppression Plan 

Details 

Electrical Utilities Plan 

Exterior Communication Systems Plan 

Airfield Lighting Plan 

Details 

Riser/One-Line Diagrams 



Fire Alarm/Detection Plan 

Details 




Telephone/Data Plan 


Details 

Plumbing 


Piping Plan 

Details 


Mechanical 


HVAC Plan 

Specialty Piping and Equipment Plan 

HTCW Utilities Plan 

Material Handling 

Machine Design 

Elevations 

Sections 

Details 

Control Diagrams 



Baggage Handling Plan 



Security Plan 


Details 

Public Information Systems 


Public Information Systems Plan 

Aviation Information Systems 


Aviation Information Systems Plan 

Electrical 


Lighting Plan 

Power Plan 

Special Systems Plan 

Grounding System Plan 

Electronic Monitoring Systems 


Electronic Monitoring Systems Plan 



January 2010 

4.4 Assignment Tables 

TABLE I-4-3 Discipline: General 

Model File Type: Border Sheet 

Level/Layer 

Naming 

Level/Layer Description 

Line Style 

Line Width 

AutoCAD Color 

MicroStation Color 

General Information 

GN-ANNO-MASK Text/shape mask for use with photo backgrounds 0 0.18 113 16 

GN-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

GN-ANNO-RDME Read-me information 0 0.18 5 1 

GN-ANNO-SYMB Miscellaneous symbols V 0.35 6 5 

GN-ANNO-TEXT Miscellaneous text 0 V V V 

GN-ANNO-TTLB Border and titleblock linework V V V V 

GN-ANNO-TTLB-GRID Grid lines inside border 7 0.18 5 1 

Coordinate Information 

GN-PROJ-LALO- 

COOR Latitude/longitude coordinate grid ticks 0 0.25 2 4 

GN-PROJ-LALO-IDEN Latitude/longitude coordinate text 0 0.25 2 4 

GN-PROJ-STAT- 

COOR State plane coordinate grid ticks 3 0.25 2 4 

GN-PROJ-STAT-IDEN State plane coordinate text 0 0.25 2 4 



January 2010 


Model File Type: Cover Sheet 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



GN-ANNO-MASK Text/shape mask for use with photo backgrounds 0 0.18 113 16 





GN-ANNO-TTLB Border and titleblock linework V V V V 



January 2010 


Model File Type: Key Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



GN-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

GN-ANNO-MATC Match lines 0 0.35 6 5 

GN-ANNO-NOTE General notes and general remarks 0 0.35 2 4 


GN-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 


GN-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 



Grid Lines 

GN-GRID-COOR X-Y coordinate grid lines 0 0.25 7 0 

GN-GRID-COOR-IDEN X-Y coordinate grid lines annotation 0 0.25 7 0 

GN-GRID-EXTR Column grid outside building 7 0.18 5 1 

GN-GRID-IDEN Column grid tags 0 0.25 1 3 

GN-PLAN-OTLN Floor outline/perimeter/building footprint 0 0.35 6 5 

Floor Information 

G-PLAN-OTLN Floor outline/perimeter/building footprint 0 0.35 6 5 

Site Information 

GN-SITE-OTLN Site plan - key map 0 0.35 6 5 



January 2010 

4.5 Hazardous Materials 

TABLE I-4-6 Discipline: Hazardous Materials 

Model File Type: Demolition Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



HM-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

HM-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

HM-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

HM-ANNO-PATT Miscellaneous patterning 0 0 8 9 

HM-ANNO-NOTE General note and general remarks 0 2 2 4 

HM-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

HM-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

HM-STAT-DEMO Demolition 2 2 6 5 

HM-STAT-EXST Existing to remain 0 1 3 2 

HM-STAT-MOVE Items to be moved 5 2 6 5 

HM-STAT-NICN Not in contract 3 0 8 9 

HM-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

HM-STAT-RELO Relocated items 2 0 5 1 

HM-STAT-TEMP Temporary work 4 3 4 7 

HM-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Pollution Prevention Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



HM-ANNO-DIMS Witness/extension lines, dimension terminators, dimension 0 V V V 

HM-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

HM-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

HM-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

HM-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

HM-ANNO-RDME Read-me information 0 0.18 5 1 

HM-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

HM-ANNO-SYMB Miscellaneous symbols V V 6 5 

HM-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Buildings 

HM-BLDG-IDEN Annotation 0 0.35 2 4 

HM-BLDG-OTLN Command posts, information centers 0 0.35 2 4 

Decontamination 

HM-DECN-EQPM Decontamination equipment 0 0.25 1 3 

HM-DECN-IDEN Annotation 0 0.35 6 5 

Disposal Areas 

HM-DISP-HAZW Hazardous waste 0 0.18 5 1 

HM-DISP-IDEN Annotation 0 0.35 6 5 

HM-DISP-MUNT Munitions 0 0.18 5 1 

HM-DISP-TANK Spill containment tanks 0 0.35 6 5 

Emergency Fixtures 

HM-FIXT-EYEW Emergency eyewashes 0 0.25 3 2 

HM-FIXT-SHWR Emergency showers 0 0.25 3 2 

Monitoring Stations 

HM-MNST-AIRQ Air quality 0 0.25 3 2 

HM-MNST-GWTR Ground water 0 0.25 3 2 

HM-MNST-IDEN Annotation 0 0.25 3 2 

HM-MNST-LAND Landfill gas 0 0.25 3 2 

HM-MNST-SOIL Soil gas 0 0.25 3 2 



January 2010 


Model File Type: Pollution Prevention Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


HM-MNST-SWTR Surface water 0 0.25 3 2 

Pollution Areas 

HM-POLL-CONC Polluted area of concern 0 0.35 2 4 

HM-POLL-IDEN Annotation 0 0.35 2 4 

HM-POLL-ORIG Point of pollution origin 0 0.35 2 4 

HM-POLL-POTN Potential spill, emission, or release source 0 0.35 2 4 

Sample Points 

HM-SAMP-AIRS Air samples 0 0.25 1 3 

HM-SAMP-BIOL Biological samples 0 0.25 1 3 

HM-SAMP-GWTR Ground water samples 0 0.25 1 3 

HM-SAMP-IDEN Annotation 0 0.25 1 3 

HM-SAMP-MAGN Magnetometer location points 0 0.25 1 3 

HM-SAMP-SEDI Sediment samples 0 0.25 1 3 

HM-SAMP-SOIL Soil samples 0 0.25 1 3 

HM-SAMP-SOLI Solid material samples 0 0.25 1 3 

HM-SAMP-SWTR Surface water samples 0 0.25 1 3 

HM-SAMP-WAST Waste samples 0 0.25 1 3 

Storage Facilities 

HM-STOR-HAZM Hazardous materials 0 0.35 6 5 

HM-STOR-HAZW Hazardous waste 0 0.35 6 5 

HM-STOR-IDEN Annotation 0 0.35 6 5 



January 2010 


Model File Type: Sections 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



HM-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 





HM-ANNO-RDME Read-me information 0 0.18 5 1 




Sections 

HM-SECT-IDEN Component identification numbers 0 0.35 2 4 

HM-SECT-MBND Material beyond section cut 0 0.18 5 1 

HM-SECT-MCUT Material cut by section 0 0.50 4 7 

HM-SECT-PATT Textures and hatch patterns 0 0.18 8 9 



January 2010 


Model File Type: Details 


Line Style 

Line Width 

AutoCAD Color 



HM-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 





HM-ANNO-RDME Read-me information V 0.18 5 1 




Detail Information 

HM-DETL-GRPH Graphics, gridlines, non-text items V V V V 

HM-DETL-INPD Inch-pound specific dimensions and notes 0 V V V 

HM-DETL-METR Metric specific dimensions and notes 0 V V V 



January 2010 

4.6 Civil 

TABLE I-4-10 Discipline: Civil 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CV-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

CV-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

CV-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

CV-ANNO-PATT Miscellaneous patterning 0 0 8 9 

CV-ANNO-NOTE General note and general remarks 0 2 2 4 

CV-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

CV-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

CV-STAT-DEMO Demolition 2 2 6 5 

CV-STAT-EXST Existing to remain 0 1 3 2 

CV-STAT-MOVE Items to be moved 5 2 6 5 

CV-STAT-NICN Not in contract 3 0 8 9 

CV-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

CV-STAT-RELO Relocated items 2 0 5 1 

CV-STAT-TEMP Temporary work 4 3 4 7 

CV-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Site Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CV-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

CV-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

CV-ANNO-MASK Text/shape mask for use with photo backgrounds 0 0.18 113 16 

CV-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

CV-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

CV-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

CV-ANNO-RDME Read-me information 0 0.18 5 1 

CV-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

CV-ANNO-SYMB Miscellaneous symbols V V 6 5 

CV-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Alignments 

CV-ALGN-DATA Alignment coordinates and curve data 0 0.35 3 2 

CV-ALGN-LINE Alignments 4 0.35 2 4 

CV-ALGN-MAJR Alignment major stationing and tick marks 0 0.35 1 3 

CV-ALGN-MARK Alignment tick marks 0 0.35 3 2 

CV-ALGN-MINR Alignment minor stationing and tick marks 0 0.18 6 5 

CV-ALGN-STAT Alignment stationing and tick marks, alignment PI stations 0 0.35 3 2 

CV-ALGN-SYMB Alignment symbols (PIs) 0 0.35 6 5 

CV-ALGN-TEXT Alignment text, annotation with associated leaders 0 0.35 2 4 

Building and Primary Structures 

CV-BLDG-DECK Outdoor decks (attached, no roof overhead) 0 0.50 4 7 

CV-BLDG-DOCK Loading docks 0 0.50 4 7 

CV-BLDG-IDEN Building and other structure annotation 0 0.35 2 4 

CV-BLDG-OTLN Building and other structure outlines 0 0.70 7 0 

CV-BLDG-OVHD Building overhangs 0 0.50 4 7 

CV-BLDG-PRCH Porches (attached, roof overhead) 0 0.50 4 7 

Borrow Areas 

CV-BORW-IDEN Borrow/spoil area annotation 0 0.35 2 4 

CV-BORW-LINE Borrow/spoil area 2 0.35 2 4 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


Bridges 

CV-BRDG-CNTR Bridge centerlines 7 0.25 1 3 

CV-BRDG-CTLJ Control joints 0 0.25 4 7 

CV-BRDG-DECK Bridge deck 0 0.50 4 7 

CV-BRDG-IDEN Bridge annotation 0 0.35 2 4 

CV-BRDG-OTLN Bridge outlines 0 0.50 4 7 

CV-BRDG-RAIL Bridge railing 0 0.25 4 7 

Channels 

CV-CHAN-BANK-IDEN Channel/canal top of bank annotation 0 0.35 2 4 

CV-CHAN-BANK-TOP Channel/canal top of bank 0 0.35 2 4 

CV-CHAN-BNCH 

Channel/canal bench design feature lines (breaklines form 

DTMs) 

0 0.35 2 4 

CV-CHAN-BWTR Breakwaters 0 0.35 6 5 

CV-CHAN-CNTR Channel centerline and survey report lines 7 0.18 5 1 

CV-CHAN-CNTR-IDEN Channel centerline and survey report lines - annotation 0 0.35 5 1 

CV-CHAN-DACL De-authorized channel limits, anchorages, etc. 0 0.35 3 2 

CV-CHAN-DACL-IDEN De-authorized channel limits, anchorages, etc. - annotation 0 0.35 3 2 

CV-CHAN-DOCK Docks, decks, floats, piers, and mooring facilities 0 0.35 6 5 

CV-CHAN-LIMT Channel limits, anchorages, turning basins, disposal areas, etc. 0 0.35 6 5 

CV-CHAN-LIMT-IDEN 

Channel limits, anchorages, turning basins, disposal areas, etc. 

- annotation 

0 0.35 6 5 

CV-CHAN-NAID Navigation aids and text 0 0.35 V V 

CV-CHAN-SLOP-LINE Channel cut/fill slope (Indicates cut and fill lines) 0 0.35 4 7 

CV-CHAN-SPOL Spoil limits 0 0.50 4 7 

CV-CHAN-SYMB Channel/canal symbols 0 0.35 6 5 

CV-CHAN-TEXT Channel/canal text, annotation with associated leaders 0 0.35 2 4 

CV-CHAN-TOE Channel/canal toe 3 0.50 5 1 

CV-CHAN-TOE-IDEN Channel/canal toe annotation 0 0.35 6 5 

CV-CHAN-TURN Turning Points 0 0.35 2 4 

CV-CHAN-WIDE Channel/canal widener 3 0.50 4 7 

Domestic Water 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-DOMW-ABND- 

PIPE 

Abandoned Piping 2 0.35 6 5 

CV-DOMW-HYDR Hydrants 0 0.35 1 3 

CV-DOMW-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-DOMW-MAIN-PIPE Main domestic water piping WATERL 0.35 6 5 

CV-DOMW-PITS-VLVE Valve pits/vaults 0 0.35 3 2 

CV-DOMW-STNS- 

IDEN 

CV-DOMW-STNS- 

PUMP 

CV-DOMW-STNS- 

REDC 

Identifier tags, symbol modifier, and text 0 0.35 2 4 

Booster pump stations 0 0.35 6 5 

Pressure reducing stations 0 0.35 6 5 

CV-DOMW-TANK Water storage tanks 0 0.35 1 3 

CV-DOMW-WELL Water well houses 0 0.35 1 3 

Dredging 

CV-DRED-IDEN Dredging annotation 0 0.35 2 4 

CV-DRED-LIMT Dredge limit lines 0 0.50 4 7 

CV-DRED-OHWM Ordinary high water marks 0 0.35 2 4 

Ditches or Washes 

CV-DTCH-BOTD Bottom of ditch or wash 0, DITCH 0.25 3 2 

CV-DTCH-CNTR Centerline of ditch or wash 7 0.18 5 1 

CV-DTCH-EWAT Edge of water 0 0.25 4 7 

CV-DTCH-IDEN Ditches and washes annotation 0 0.35 3 2 

CV-DTCH-TOP~ Top of ditch or wash 0 0.25 3 2 

Erosion and Sediment Control (Temporary/Construction) 

CV-EROS-CIPR Culvert inlet protection V 0.25 3 2 

CV-EROS-CNTE Construction entrance V 0.35 6 5 

CV-EROS-DDIV Drainage divides 0 0.50 4 7 

CV-EROS-DVDK Diversion dike 0 0.50 4 7 

CV-EROS-IDEN Erosion and sediment control annotation 0 0.35 3 2 

CV-EROS-INPR Inlet protection V 0.25 3 2 

CV-EROS-SILT Silt fence SILT 0.35 2 4 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-EROS-SILT-CHCK Silt check 0 0.35 2 4 

CV-EROS-SILT-TRAP Silt trap 0 0.35 2 4 

CV-EROS-SSLT Super silt fence SSILT 0.35 2 4 

Flood Hazard Area 

CV-FLHA-025Y 25 year mark 6 0.35 6 5 





CV-FLHA-IDEN Flood hazard area annotation 0 0.35 2 4 

Floodwalls 

CV-FLOD-BASE Floodwall base of wall 0 0.50 20 6 

CV-FLOD-BASE-IDEN Floodwall base of wall annotation 0 0.35 20 6 

CV-FLOD-CNTR Floodwall centerline 7 0.18 20 6 

CV-FLOD-CNTR-IDEN Floodwall centerline annotation 0 0.35 20 6 

CV-FLOD-DRAN Floodwall toe drain 0 0.35 6 5 

CV-FLOD-DRAN-IDEN Floodwall toe drain annotation 0 0.35 6 5 

CV-FLOD-PILE Floodwall sheet piling 0 0.50 22 22 

CV-FLOD-PILE-IDEN Floodwall sheet piling annotation 0 0.35 22 22 

CV-FLOD-TOE~ Floodwall toe outline 0 0.35 4 7 

CV-FLOD-TOP~ Floodwall top of wall 0 0.50 2 4 

CV-FLOD-TOP~-IDEN Floodwall top of wall annotation 0 0.35 20 6 

Liquid Fuel 

CV-FUEL-ABND-PIPE Abandoned piping 2 0.35 6 5 

CV-FUEL-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-FUEL-MAIN-PIPE Main fuel piping LIQPET 0.35 6 5 

CV-FUEL-PITS-HYDR Hydrant control pits 0 0.35 3 2 

CV-FUEL-PITS-VLVE Valve pits 0 0.35 3 2 

CV-FUEL-TANK Fuel tanks 0 0.35 3 2 

Grade Linework 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-GRAD-DSGN Design grade (proposed) 0 0.35 3 2 

CV-GRAD-EXST Existing grade, ground line 3 0.35 6 5 

CV-GRAD-FNSH Finished grade 0 0.50 4 7 

CV-GRAD-FNSH-PRP1 Proposed Surface #1 0 0.35 8 9 




CV-GRAD-GTXL Geotextile placement grade 0 0.25 2 4 

CV-GRAD-IDEN Grade annotation for cross sections and profiles 0 0.35 2 4 

CV-GRAD-SCLN Stability control line 7 0.50 5 1 

CV-GRAD-WATR Water surface in section view 0 0.35 2 4 

Industrial Waste Water 

CV-INDW-ABND-PIPE Abandoned piping 2 0.35 6 5 

CV-INDW-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-INDW-MAIN-PIPE Main industrial waste water piping IWASTE 0.35 6 5 

Irrigation 

CV-IRRG-EQPM Irrigation equipment (e.g., controllers, valves, etc.) 0 0.35 2 4 

CV-IRRG-IDEN Irrigation annotation 0 0.35 2 4 

CV-IRRG-PIPE Irrigation piping 0 0.35 6 5 

Levees 

CV-LEVE-BANK-IDEN Levee top of bank annotation 0 0.25 20 6 

CV-LEVE-BANK-TOP Levee top of bank 0 0.35 2 4 

CV-LEVE-BERM Levee berm outline 0 0.35 6 5 

CV-LEVE-BNCH Levee bench design feature lines (breaklines form DTMs) 0 0.35 20 6 

CV-LEVE-BNCH-IDEN Levee bench annotation 0 0.25 2 4 

CV-LEVE-BRRW Borrow limits 0 0.50 4 7 

CV-LEVE-CNTR Levee centerline 7 0.18 20 6 

CV-LEVE-CNTR-IDEN Levee centerline annotation 0 0.35 20 6 

CV-LEVE-IDEN Levee annotation 0 0.35 2 4 

CV-LEVE-OTLN Levee outline 0 0.50 4 7 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-LEVE-SLOP Levee slope indicator with annotation 0 0.35 2 4 

CV-LEVE-STAT Levee stationing 0 0.35 2 4 

CV-LEVE-TOE Levee toe 2 0.35 20 6 

CV-LEVE-TOE-IDEN Levee toe annotation 0 0.25 20 6 

Police Ranges 

CV-POLC-BATP Battle positions 0 0.50 4 7 

CV-POLC-CAMS Range cameras 0 0.35 6 5 

CV-POLC-FOXH Fox holes and pits 0 0.35 6 5 

CV-POLC-MATS Moving army targets 0 0.50 4 7 

CV-POLC-MITS Moving infantry targets 0 0.50 4 7 

CV-POLC-MITS-IDEN Moving infantry targets annotation 0 0.35 2 4 

CV-POLC-PUTS Pop up targets 0 0.50 4 7 

CV-POLC-PUTS-IDEN Pop up targets annotation 0 0.35 2 4 

CV-POLC-SATS Stationary army targets 0 0.50 4 7 

CV-POLC-SATS-IDEN Stationary army targets annotation 0 0.35 2 4 

CV-POLC-SITS Stationary infantry targets 0 0.50 4 7 

CV-POLC-SITS-IDEN Stationary infantry targets annotation 0 0.35 2 4 

Natural Gas 

CV-NGAS-ABND-PIPE Abandoned piping 2 0.35 6 5 

CV-NGAS-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-NGAS-MAIN-PIPE Main natural gas piping NTGASN 0.35 6 5 

CV-NGAS-PITS-VLVE Valve pits/boxes 0 0.35 3 2 

CV-NGAS-TANK Tanks 0 0.25 3 2 

Parking Lots 

CV-PRKG-CARS Graphic illustration of cars 0 0.35 2 4 

CV-PRKG-CNTR Parking lot centerlines 7 0.25 1 3 

CV-PRKG-CNTR-IDEN Parking lot centerline annotation 0 0.25 1 3 

CV-PRKG-CURB Curbs and gutters 0 0.35 3 2 

CV-PRKG-DRAN Drainage slope indications 0 0.35 1 3 

CV-PRKG-FIXT Parking lot fixtures (e.g., wheel stops, parking meters) 0 0.35 91 106 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-PRKG-FLNE Fire lanes 0 0.25 1 3 

CV-PRKG-IDEN Parking lot annotation 0 0.35 6 5 

CV-PRKG-MRKG Pavement markings 0 0.35 2 4 

CV-PRKG-OTLN Parking lot outlines 0 0.50 4 7 

CV-PRKG-SIGN Signs 0 0.35 2 4 

Property 

CV-PROP-CONS Construction limits/controls, staging area CONLMT 0.70 7 0 

CV-PROP-ESMT Easements CONEMT 0.70 7 0 

CV-PROP-IDEN Property annotation 0 0.35 6 5 

CV-PROP-RWAY Right of ways 6 0.70 7 0 

CV-PROP-RWAY- 

ACQU 

Right of way to be acquired in perpetuity 0 0.70 7 0 

CV-PROP-SECT Section lines 7 0.50 6 5 

CV-PROP-SECT-IDEN Section lines annotation 0 0.35 6 5 

CV-PROP-TSHP Township/range lines 4 0.50 6 5 

CV-PROP-TSHP-IDEN Township/range lines annotation 0 0.35 6 5 

Pavement 

CV-PVMT-ASPH Pavement pattern - asphalt 0 0.18 8 9 

CV-PVMT-CONC Pavement pattern - concrete 0 0.18 8 9 

CV-PVMT-GRVL Pavement pattern - gravel 0 0.18 8 9 

CV-PVMT-IDEN Road, parking lot, railroad, airfield pavement annotation 0 0.25 2 4 

CV-PVMT-MRKG Pavement markings 0 0.35 2 4 

CV-PVMT-PATT Joint patterns, text and dimensions 0 0.35 2 4 

Rivers 

CV-RIVR-BANK-TOP Top of river bank 0 0.35 5 1 

CV-RIVR-BOTM River bottom 0 0.35 5 1 

CV-RIVR-CNTR Centerline of river 7 0.25 1 3 

CV-RIVR-EDGE River edge 0 0.50 5 1 

CV-RIVR-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Roads, Streets, and Highways 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-ROAD-ASPH Road outlines - asphalt surface 0 0.25 8 9 

CV-ROAD-CNTR Road centerlines 7 0.25 1 3 

CV-ROAD-CNTR-IDEN Road centerline annotation 0 0.25 1 3 

CV-ROAD-CONC Road outlines - concrete surface 0 0.25 7 0 

CV-ROAD-CURB Curbs and gutters 0 0.35 6 5 

CV-ROAD-GRAL Guard rails GUARD 0.35 6 5 

CV-ROAD-GRVL Road outlines - gravel surface 0 0.25 20 6 

CV-ROAD-IDEN Road, street, highway annotation 0 0.35 6 5 

CV-ROAD-MRKG Pavement markings 0 0.35 2 4 

CV-ROAD-PATT Joint patterns, text and dimensions 0 0.35 2 4 

CV-ROAD-SHLD Roadway shoulder 0 0.35 6 5 

CV-ROAD-SIGN Signs 0 0.25 1 3 

CV-ROAD-UPVD Road outlines - unpaved surface 0 0.25 3 2 

Riprap and Other Permanent Erosion Control Items 

CV-RRAP-GABN Gabions V 0.25 1 3 

CV-RRAP-MATS Articulated concrete mats V 0.25 3 2 

CV-RRAP-RVMT Revetments V 0.25 1 3 

CV-RRAP-WEIR Weirs V 0.25 3 2 

Site Features 

CV-SITE-BLIN Site breakline 2 0.35 3 2 

CV-SITE-FENC Fences and handrails 0, FENCE 0.35 6 5 

CV-SITE-FENC-IDEN Fence, handrail, ramp, and trail annotation 0 0.35 6 5 

CV-SITE-IDEN Site feature annotation 0 0.35 6 5 

CV-SITE-STRC Structures (bridges, sheds, foundation pads, footings, etc.) 0 0.35 22 22 

CV-SITE-STRS Stairs and ramps 0 0.35 6 5 

CV-SITE-WALK Walks, trails and bicycle paths 0 0.35 2 4 

Sanitary Sewer 

CV-SSWR-ABND-PIPE Abandoned piping 2 0.35 6 5 

CV-SSWR-DEVC 

Grease traps, grit chambers, flumes, neutralizers, oil/water 

separators, ejectors, and valves 

0 0.35 6 5 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-SSWR-DEVCV- 

IDEN 


CV-SSWR-FTTG Caps and cleanouts 0 0.35 6 5 

CV-SSWR-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-SSWR-JBOX Junction boxes and manholes 0 0.35 1 3 

CV-SSWR-MAIN-PIPE Sanitary sewer piping SSWAF 0.35 6 5 

CV-SSWR-TANK Septic tanks 0 0.35 3 2 

Storm Sewer 

CV-STRM-ABND-PIPE Abandoned piping 2 0.35 6 5 

CV-STRM-CULV Culverts CULVRT 0.35 3 2 

CV-STRM-DEVC Downspouts, flumes, oil/water separators, and flap gates 0 0.35 6 5 

CV-STRM-FTTG Caps and cleanouts 0 0.35 6 5 

CV-STRM-HDWL Headwalls and endwalls 0 0.50 7 0 

CV-STRM-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-STRM-MAIN-PIPE Storm sewer piping STRAF 0.35 6 5 

CV-STRM-MHOL Manholes 0 0.35 1 3 

CV-STRM-STNS- 

PUMP 

Pump stations 0 0.35 6 5 

Survey 

CV-SURV-DATA 

Survey data (benchmarks and horizontal control points or 

monuments) 

0 0.35 6 5 

CV-SURV-IDEN Survey, baseline, and control line annotation 0 0.35 6 5 

CV-SURV-LINE Survey, baseline, and control lines 2 0.35 4 7 

Topography 

CV-TOPO-BDRY-EXTR Surface exterior boundary 0 0.18 3 2 

CV-TOPO-BDRY-INTR Surface interior boundary 2 0.18 1 3 

CV-TOPO-BKLN Breaklines 4 0.50 7 0 

CV-TOPO-BKLN- 

COMM 

Subsurface utilities communications breakline 

COMUG 

N 

0.50 7 0 

CV-TOPO-BKLN- 

DOMW 

Subsurface utilities water breakline WATERL 0.50 7 0 

CV-TOPO-BKLN-ELEC Subsurface utilities electric breakline EPUGN 0.50 7 0 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-TOPO-BKLN-FUEL Subsurface utilities liquid fuel breakline LIQPET 0.50 7 0 

CV-TOPO-BKLN-NGAS Subsurface utilities natural gas breakline NTGASN 0.50 7 0 

CV-TOPO-BKLN- 

SSWR 

Subsurface utilities sanitary sewer breakline SSWAF 0.50 7 0 

CV-TOPO-BKLN-STRM Subsurface utilities storm sewer breakline STRAF 0.50 7 0 

CV-TOPO-BORE Boring locations and text 0 0.35 6 5 

CV-TOPO-COOR Coordinate grid ticks and text 0 0.35 122 23 

CV-TOPO-COOR- 

LALO 

CV-TOPO-COOR- 

STAT 

Latitude and longitude grid ticks 0 0.25 3 2 

State Plane coordinate ticks 0 0.25 3 2 

CV-TOPO-DTMO DTM obscure area boundary 0 0.35 6 5 

CV-TOPO-DTMP DTM points 0 0.35 6 5 

CV-TOPO-DTMT DTM triangles 0 0.35 22 22 

CV-TOPO-MAJR Major contours 0 0.35 2 4 

CV-TOPO-MAJR-IDEN Major contours - annotation 0 0.35 2 4 

CV-TOPO-MINR Minor contours 0 0.25 3 2 

CV-TOPO-MINR-IDEN Minor contours - annotation 0 0.25 3 2 

CV-TOPO-SHAP Inroads generated shapes/lines 0 0.25 1 3 

CV-TOPO-SHOR Shorelines, land features, and references 0 0.35 4 7 

CV-TOPO-SLOP-FILL Cut/fill slopes 0 0.35 2 4 

CV-TOPO-SLOP-IDEN Cut/fill slope, top/toe slope annotation 0 0.35 2 4 

CV-TOPO-SLOP-TOPT Top/toe slopes 0 0.35 6 5 

CV-TOPO-SOUN Soundings and overbanks 0 0.18 V V 

CV-TOPO-SPOT Spot elevations 0 0.35 2 4 

CV-TOPO-SURF- 

PERM 

CV-TOPO-SURF- 

PONT 

Surface perimeter 0 0.18 3 2 

Surface feature points 0 0.25 7 0 

CV-TOPO-SURF-VOID Surface void region 0 0.18 1 3 

CV-TOPO-WATR Water level reference (LWRP, after-grading LWRP, SWL, etc) 3 0.50 V V 

Elevations 

CV-ELEV-FIXT Miscellaneous fixtures 0 0.35 2 4 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-ELEV-IDEN Component identification numbers 0 0.35 2 4 

CV-ELEV-OTLN Building outlines 0 0.35 6 5 

CV-ELEV-PATT Textures and hatch patterns 0 0.18 8 9 

CV-ELEV-SIGN Signage 0 0.35 1 3 



January 2010 


Model File Type: Grading Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Alignments 
















Borrow Areas 





January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Topography 






CV-TOPO-COOR- 

LALO 

CV-TOPO-COOR- 

STAT 















January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 




CV-TOPO-SURF- 

PERM 

CV-TOPO-SURF- 

PONT 






January 2010 


Model File Type: Eco-Restoration Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Alignments 










Habitats/Landforms 

CV-ECCO-BURR Burrow 0 0.50 4 7 

CV-ECCO-DENS Den 0 0.50 4 7 

CV-ECCO-GATR Gator hole 2 0.35 6 5 

CV-ECCO-HUMK Hummocks 0 0.35 6 5 

CV-ECCO-IDEN Habitat annotation 0 0.35 2 4 

CV-ECCO-NEST Nest, nesting tree 0 0.50 4 7 

CV-ECCO-PRCH Perch/nesting hole 0 0.50 4 7 





January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



Irrigation 





CV-SHOR-BANK-TOP Shore top of bank 0 0.25 6 5 

CV-SHOR-BKLN Shore breakline 2 0.35 5 1 

CV-SHOR-BLIN Shore baseline and control line 0 0.50 4 7 

CV-SHOR-BLIN-IDEN Shore baseline and control line annotation 0 0.25 4 7 

CV-SHOR-BNCH Shore bench 6 0.35 22 22 

CV-SHOR-CNTR Shore centerline 7 0.25 5 1 

CV-SHOR-CNTR-IDEN Shore centerline annotation 0 0.25 6 5 

CV-SHOR-ELIN Shore erosion control line 0 0.50 4 7 

CV-SHOR-ELIN-IDEN Shore erosion control line annotation 0 0.25 6 5 

CV-SHOR-LIMT Shore limit lines 0 0.50 4 7 

CV-SHOR-OHWM Ordinary high water marks 0 0.35 2 4 

CV-SHOR-OTLN Shore outline 0 0.25 2 4 

CV-SHOR-SLOP-IDEN Shore slope indicator with annotation 0 0.25 7 0 

CV-SHOR-SLOP-TOP Shore top of slope 2 0.35 22 22 

CV-SHOR-SYMB Shore symbols 0 0.18 6 5 

CV-SHOR-TOE Shore toe 3 0.50 5 1 

CV-SHOR-TOE-IDEN Shore toe annotation 0 0.25 7 0 

Topography 









January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 









CV-TOPO-SURF- 

PERM 

CV-TOPO-SURF- 

PONT 




Wetlands 

CV-WETL-BOGS Bogs 0 0.35 6 5 

CV-WETL-FENS Fens 0 0.35 2 4 

CV-WETL-IDEN Wetland annotation 0 0.35 2 4 

CV-WETL-MRSH Fresh water marshes 0 0.35 162 33 

CV-WETL-MRSH-SALT Tidal saltwater marshes 0 0.35 162 33 

CV-WETL-MRSH-TIDL Tidal freshwater marsh 0 0.35 162 33 

CV-WETL-PCSN Pocosins 0 0.35 6 5 

CV-WETL-PHOL 

Vernal pools, playas, prairie potholes, wet meadows, and wet 

prairies 

0 0.35 6 5 

CV-WETL-RPRN Riparian forested wetlands 0 0.35 162 33 

CV-WETL-SLGH Sloughs 0 0.35 162 33 

CV-WETL-SWMP Swamps 0 0.35 162 33 



January 2010 


Model File Type: Shore Bankline 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Alignments 










Borrow Areas 



Channels 


Dredging 






January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 











CV-SHOR-BANK-TOP Shore top of bank 0 0.25 6 5 

CV-SHOR-BKLN Shore breakline 2 0.35 5 1 

CV-SHOR-BLIN Shore baseline and control line 0 0.50 4 7 

CV-SHOR-BLIN-IDEN Shore baseline and control line annotation 0 0.25 4 7 

CV-SHOR-BNCH Shore bench 6 0.35 22 22 

CV-SHOR-CNTR Shore centerline 7 0.25 5 1 

CV-SHOR-CNTR-IDEN Shore centerline annotation 0 0.25 6 5 

CV-SHOR-ELIN Shore erosion control line 0 0.50 4 7 

CV-SHOR-ELIN-IDEN Shore erosion control line annotation 0 0.25 6 5 

CV-SHOR-LIMT Shore limit lines 0 0.50 4 7 

CV-SHOR-OHWM Ordinary high water marks 0 0.35 2 4 

CV-SHOR-OTLN Shore outline 0 0.25 2 4 

CV-SHOR-SLOP-IDEN Shore slope indicator with annotation 0 0.25 7 0 

CV-SHOR-SLOP-TOP Shore top of slope 2 0.35 22 22 

CV-SHOR-SYMB Shore symbols 0 0.18 6 5 

CV-SHOR-TOE Shore toe 3 0.50 5 1 

CV-SHOR-TOE-IDEN Shore toe annotation 0 0.25 7 0 

Storm Sewer 






January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 






Survey 

CV-SURV-DATA 


monuments) 

0 0.35 6 5 



Topography 


CV-TOPO-BKLN- 

COMM 


COMUG 

N 

0.50 7 0 

CV-TOPO-BKLN- 

DOMW 





CV-TOPO-BKLN- 

SSWR 
















January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 





Elevations 








January 2010 


Model File Type: Navigation Dredging Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Alignments 















Borrow Areas 



Bridges 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 







Channels 



CV-CHAN-BNCH 


DTMs) 

0 0.35 2 4 










- annotation 

0 0.35 6 5 








CV-CHAN-TURN 

Turning points 

0 0.35 2 4 



CV-DOMW-ABND- 

PIPE 

Abandoned piping 2 0.35 6 5 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-DOMW-DEVC 

Connectors, faucets, reducers, regulators, vents, intake points, 

taps, backflow preventers, and valves 

0 0.35 6 5 

CV-DOMW-FIRE Fire lines FIRE 0.25 1 3 

CV-DOMW-FTTG Caps, cleanouts, crosses, and tees 0 0.35 6 5 




CV-DOMW-METR Meters 0 0.35 3 2 

CV-DOMW-NPOT- 

HYDR 

CV-DOMW-NPOT- 

PIPE 

Non-potable hydrants/flushing hydrants 0 0.35 1 3 

Non-potable water piping NONPOT 0.35 6 5 

CV-DOMW-PITS-IDEN Identifier tags, symbol modifier, and text 0 0.35 3 2 

CV-DOMW-PITS-VENT Vent pits 0 0.35 3 2 


CV-DOMW-SERV-PIPE Domestic water service piping 0 0.35 6 5 

CV-DOMW-SIGN Surface markers/signs 0 0.35 1 3 

Dredging 




Liquid Fuel 












January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 















Levees 















Natural Gas 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 





Property 





CV-PROP-RWAY- 

ACQU 






Pavement 







Rivers 

CV-RIVR-BANK-TOP Top of river bank 0 0.35 5 1 










January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 









Storm Sewer 








Survey 

CV-SURV-DATA 


monuments) 

0 0.35 6 5 



Topography 




CV-TOPO-BKLN- 

COMM 


COMUG 

N 

0.50 7 0 

CV-TOPO-BKLN- 

DOMW 







January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-TOPO-BKLN- 

SSWR 





CV-TOPO-COOR- 

LALO 

CV-TOPO-COOR- 

STAT 
















CV-TOPO-SURF- 

PERM 

CV-TOPO-SURF- 

PONT 







January 2010 


Model File Type: Flood Control Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Alignments 










Borrow Areas 



Bridges 








January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



Channels 



CV-CHAN-BNCH 


DTMs) 

0 0.35 2 4 










- annotation 

0 0.35 6 5 








CV-CHAN-TURN 

Turning points 

0 0.35 2 4 



CV-DOMW-ABND- 

PIPE 


CV-DOMW-DEVC 



0 0.35 6 5 





January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 






CV-DOMW-NPOT- 

HYDR 

CV-DOMW-NPOT- 

PIPE 








CV-DOMW-STNS- 

IDEN 

CV-DOMW-STNS- 

PUMP 

CV-DOMW-STNS- 

REDC 






Dredging 




Ditches or Washes 

CV-DTCH-BOTD Bottom of ditch or wash 0, DITCH 0.25 3 2 

CV-DTCH-CNTR Centerline of ditch or wash 7 0.18 5 1 

CV-DTCH-EWAT Edge of water 0 0.25 4 7 

CV-DTCH-IDEN Ditches and washes annotation 0 0.35 3 2 

CV-DTCH-TOP Top of ditch or wash 0 0.25 3 2 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Flood Hazard Area 






CV-FLHA-IDEN Flood hazard area annotation 0 0.35 2 4 

Floodwalls 

CV-FLOD-BASE Floodwall base of wall 0 0.50 20 6 

CV-FLOD-BASE-IDEN Floodwall base of wall annotation 0 0.35 20 6 








CV-FLOD-TOE Floodwall toe outline 0 0.35 4 7 

CV-FLOD-TOP Floodwall top of wall 0 0.50 2 4 

CV-FLOD-TOP-IDEN Floodwall top of wall annotation 0 0.35 20 6 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 

















Levees 

















January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


Parking Lots 












Property 





CV-PROP-RWAY- 

ACQU 






Pavement 







Rivers 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-RIVR-BANK-TOP~ Top of river bank 0 0.35 5 1 
























Site Features 

CV-SITE-BLIN Site breakline 2 0.35 3 2 

CV-SITE-FENC Fences and handrails 0, FENCE 0.35 6 5 

CV-SITE-FENC-IDEN Fence, handrail, ramp, and trail annotation 0 0.35 6 5 


CV-SITE-STRC Structures (bridges, sheds, foundation pads, footings, etc.) 0 0.35 22 22 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-SITE-STRS Stairs and ramps 0 0.35 6 5 

CV-SITE-WALK Walks, trails and bicycle paths 0 0.35 2 4 






Storm Sewer 








CV-STRM-STNS- 

PUMP 


Survey 

CV-SURV-DATA 


monuments) 

0 0.35 6 5 



Topography 




CV-TOPO-BKLN- 

COMM 


COMUG 

N 

0.50 7 0 

CV-TOPO-BKLN- 

DOMW 






January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CV-TOPO-BKLN- 

SSWR 





CV-TOPO-COOR- 

LALO 

CV-TOPO-COOR- 

STAT 
















CV-TOPO-SURF- 

PERM 

CV-TOPO-SURF- 

PONT 





Elevations 






January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 






January 2010 


Model File Type: Transportation Site Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Alignments 









Bridges 







Parking Lots 





January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 











Pavement 





Railroads 

CV-RAIL-CNTR Railroad track centerlines 7 0.25 1 3 

CV-RAIL-CNTR-IDEN Railroad track centerline annotation 0 0.35 1 3 

CV-RAIL-EQPM Railroad equipment (e.g., gates, signals) 0 0.35 91 106 

CV-RAIL-IDEN Railroad - annotation 0 0.35 6 5 

CV-RAIL-TRAK Railroad tracks RAILRD 0.35 2 4 













January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 






Topography 







CV-TOPO-SURF- 

PERM 

CV-TOPO-SURF- 

PONT 






January 2010 


Model File Type: Joint Layout Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Joints 

CV-JNTS-CNSL Construction joints - longitudinal 0 0.35 6 5 

CV-JNTS-CNST Construction joints - transverse 0 0.35 6 5 

CV-JNTS-CNTL Contraction joints - longitudinal 0 0.35 2 4 

CV-JNTS-CNTT Contraction joints - transverse 0 0.35 2 4 

CV-JNTS-EDGE Thickened edges 0 0.35 4 7 

CV-JNTS-EXPN Expansion joints 0 0.35 12 27 

CV-JNTS-IDEN Joint annotation 0 0.35 2 4 

Pavement 


Topography 





January 2010 


Model File Type: Airfield Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Alignments 









Aprons 

CV-APRN-CNTR Apron centerlines 7 0.35 1 3 

CV-APRN-CNTR-IDEN Apron centerline annotation 0 0.35 2 4 

CV-APRN-GRND Grounding points 0 0.35 2 4 

CV-APRN-HOLD Holding position markings 0 0.25 1 3 

CV-APRN-IDEN Airfield apron - annotation 0 0.35 2 4 

CV-APRN-MOOR Mooring points 0 0.35 4 7 

CV-APRN-MRKG Apron markings 0 0.50 4 7 

CV-APRN-OTLN Airfield apron - outlines 0 0.50 4 7 

CV-APRN-SECU Security zone markings 0 0.25 1 3 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-APRN-SHLD Shoulders with annotation 0 0.35 2 4 

CV-APRN-SHLD- 

MRKG 

Shoulder stripes 0 0.35 2 4 

Heliports 

CV-HELI-BLST Blast pad and stopway markings 0 0.35 1 3 

CV-HELI-CNTR Centerline markings 0 0.35 1 3 

CV-HELI-DISP Displaced threshold markings 0 0.35 1 3 

CV-HELI-DIST Fixed distance markings 0 0.35 1 3 

CV-HELI-IDEN Heliport numbers and letters 0 0.35 2 4 

CV-HELI-SHLD Shoulder markings 0 0.35 6 5 

CV-HELI-SIDE Side stripes 0 0.50 4 7 

CV-HELI-TDZM Touchdown zone markers 0 0.35 6 5 

CV-HELI-THRS Threshold markers 0 0.35 6 5 

Obstructions 

CV-OBST-AIRS Airspace obstructions 0 0.35 3 2 

CV-OBST-AIRS-IDEN Obstruction annotation 0 0.35 2 4 

Overrun Areas 

CV-OVRN-CNTR Centerlines 7 0.25 1 3 

CV-OVRN-CNTR-IDEN Centerline annotation 0 0.35 2 4 

CV-OVRN-IDEN Airfield overrun area - annotation 0 0.35 2 4 

CV-OVRN-OTLN Airfield overrun area - outlines 0 0.35 4 7 

CV-OVRN-SHLD- 

MRKG 

Shoulder markings 0 0.35 4 7 

Pads (Arm/Disarm/Calibration, etc.) 

CV-PADS-CNTR Centerlines 7 0.25 1 3 

CV-PADS-CNTR-IDEN Centerline annotation 0 0.35 2 4 

CV-PADS-IDEN Pads - annotation 0 0.35 2 4 

CV-PADS-OTLN Pad - outlines 0 0.35 4 7 

CV-PADS-SHLD Shoulders with annotation 0 0.25 2 4 

Pavement 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 





Runways 

CV-RUNW-BLST Blast pad and stopway markings 0 0.35 1 3 

CV-RUNW-CNTR Centerlines 7 0.25 1 3 

CV-RUNW-CNTR- 

MRKG 

Centerline markings 0 0.35 1 3 

CV-RUNW-DISP Displaced threshold markings 0 0.35 1 3 

CV-RUNW-DIST Fixed distance markings 0 0.35 1 3 

CV-RUNW-EDGE Airfield runway edges 0 0.35 6 5 

CV-RUNW-IDEN Airfield runway annotation 0 0.35 2 4 

CV-RUNW-SHLD Shoulder markings 0 0.35 4 7 

CV-RUNW-SIDE Side stripes 0 0.35 4 7 

CV-RUNW-TDZM Touchdown zone markers 0 0.35 6 5 

CV-RUNW-THRS Threshold markers 0 0.35 6 5 

Taxiways 

CV-TAXI-CNTR Centerlines 7 0.25 1 3 

CV-TAXI-CNTR-IDEN Centerline annotation 0 0.35 2 4 

CV-TAXI-CNTR-MRKG Centerline markings 0 0.25 1 3 

CV-TAXI-EDGE Edge markings 0 0.35 4 7 

CV-TAXI-HOLD Holding lines 0 0.35 2 4 

CV-TAXI-IDEN Taxiway - annotation 0 0.35 2 4 

CV-TAXI-OTLN Taxiway - outlines 0 0.35 4 7 

CV-TAXI-SHLD Shoulders with annotation 0 0.35 2 4 

Topography 








January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CV-TOPO-SURF- 

PERM 

CV-TOPO-SURF- 

PONT 




Airfield Traffic Areas 

CV-TRAF-IDEN Airfield traffic area annotation 0 0.35 2 4 

CV-TRAF-TYPA Type A traffic area 4 0.50 4 7 

CV-TRAF-TYPB Type B traffic area 6 0.50 4 7 

CV-TRAF-TYPC Type C traffic area 10 0.50 4 7 



January 2010 


Model File Type: Utilities Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Alignments 










CV-DOMW-ABND- 

PIPE 


CV-DOMW-DEVC 



0 0.35 6 5 









January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-DOMW-NPOT- 

HYDR 

CV-DOMW-NPOT- 

PIPE 








CV-DOMW-STNS- 

IDEN 

CV-DOMW-STNS- 

PUMP 

CV-DOMW-STNS- 

REDC 






Liquid Fuel 


CV-FUEL-BERM Berms for retaining fuel in case of major tank/line rupture 0 0.35 6 5 

CV-FUEL-DEFL-PIPE Defueling piping 0 0.35 6 5 

CV-FUEL-DEVC 

Air eliminators, filter strainers, hydrant fill points, line vents, 

markers, oil/water 

separators, reducers, regulators, and valves 

0 0.35 6 5 

CV-FUEL-FLOW Flow direction arrows 0 0.35 6 5 

CV-FUEL-FTTG Caps, crosses, and tees 0 0.35 6 5 


CV-FUEL-JBOX Junction boxes, manholes, handholes, test boxes 0 0.35 1 3 


CV-FUEL-METR Meters 0 0.35 3 2 


CV-FUEL-PITS-IDEN Identifier tags, symbol modifier, and text 0 0.35 3 2 

CV-FUEL-PITS-VENT Vent pits 0 0.35 3 2 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CV-FUEL-SERV-PIPE Service piping 0 0.35 6 5 

CV-FUEL-STNS-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-FUEL-STNS-PUMP Booster pump stations 0 0.35 6 5 


CV-FUEL-TRCH Fuel line trench 0 0.35 3 2 



CV-INDW-DEVC 

Grit chambers, meters, flumes, neutralizers, oil/water 

separators, ejectors, 

tanks, and valves 

0 0.35 6 5 

CV-INDW-FLOW Flow direction arrows 0 0.35 6 5 

CV-INDW-FTTG Caps and cleanouts 0 0.35 6 5 


CV-INDW-JBOX Junction boxes and manholes 0 0.35 1 3 

CV-INDW-LAGN Lagoons 0 0.35 6 5 

CV-INDW-LAGN-IDEN Identifier tags, symbol modifier, and text 0 0.35 6 5 


CV-INDW-PLNT Treatment plants 0 0.35 6 5 

CV-INDW-SERV-PIPE Industrial waste water service piping 0 0.35 1 3 

CV-INDW-SIGN Surface markers/signs 0 0.35 1 3 

CV-INDW-STNS-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-INDW-STNS-LIFT Lift stations 0 0.35 6 5 

Irrigation 




CV-IRRG-WELL Irrigation wells 0 0.25 3 2 

Natural Gas 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-NGAS-DEVC 

Hydrant fill points, lights, vents, markers, rectifiers, reducers, 

regulators, 

sources, drip pots, taps, and valves 

0 0.35 6 5 

CV-NGAS-DEVCV- 

IDEN 


CV-NGAS-FLOW Flow direction arrows 0 0.35 6 5 

CV-NGAS-FTTG Caps, crosses, and tees 0 0.35 6 5 



CV-NGAS-METR Meters 0 0.35 3 2 

CV-NGAS-PITS-IDEN Identifier tags, symbol modifier, and text 0 0.35 1 3 

CV-NGAS-PITS-VENT Vent pits 0 0.35 3 2 


CV-NGAS-SERV-PIPE Service piping 0 0.35 1 3 

CV-NGAS-SIGN Surface markers/signs 0 0.35 1 3 

CV-NGAS-STNS-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-NGAS-STNS- 

PUMP 

CV-NGAS-STNS- 

REDC 

Compressor stations 0 0.35 6 5 

Reducing stations 0 0.35 6 5 

CV-NGAS-TANK Tanks 0 0.25 3 2 



CV-SSWR-DEVC 


separators, 

ejectors, and valves 

0 0.35 6 5 


IDEN 


CV-SSWR-FILT Filtration beds 0 0.35 3 2 

CV-SSWR-FILT-IDEN Identifier tags, symbol modifier, and text 0 0.35 3 2 

CV-SSWR-FLOW Flow direction arrows 0 0.35 6 5 





January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CV-SSWR-JBOX-IDEN Identifier tags, symbol modifier, and text 0 0.35 1 3 

CV-SSWR-LAGN Lagoons 0 0.35 3 2 

CV-SSWR-LEAC Leach field 0 0.35 3 2 


CV-SSWR-NITF Nitrification drain fields 0 0.35 6 5 

CV-SSWR-PLNT Treatment plants 0 0.35 6 5 

CV-SSWR-SERV-PIPE Sanitary sewer service piping 0 0.35 1 3 

CV-SSWR-SIGN Surface markers/signs 0 0.35 1 3 

CV-SSWR-STNS-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-SSWR-STNS- 

PUMP 



Storm Sewer 


CV-STRM-AFFF AFFF lagoon/detention pond 0 0.35 3 2 

CV-STRM-CHUT Chutes and concrete erosion control structures 0 0.35 1 3 



CV-STRM-FLOW Flow direction arrows 0 0.35 6 5 

CV-STRM-FMON Flow monitoring station 0 0.35 6 5 




CV-STRM-INLT Inlets (curb, surface, and catch basins) 0 0.35 3 2 

CV-STRM-LAGN Lagoons, ponds, watersheds, and basins 0 0.35 3 2 

CV-STRM-MAIN-PIPE Storm sewer piping STRAF STRAF 0.35 6 5 


CV-STRM-ROOF Roof drain line 0 0.35 3 2 

CV-STRM-SERV-PIPE Storm sewer service piping 0 0.35 1 3 

CV-STRM-SIGN Surface markers/signs 0 0.35 1 3 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-STRM-STNS-IDEN Identifier tags, symbol modifier, and text 0 0.35 2 4 

CV-STRM-STNS- 

PUMP 


CV-STRM-SUBS-PIPE Subsurface drain piping 0 0.35 3 2 

Topography 




January 2010 


Model File Type: Profiles 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Alignments 







Aprons 






Bridges 

CV-BRDG-CHRD- 

LOW~ 

Low chord 0 0.50 4 7 



Channels 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-CHAN-BANK-TOP~ Channel/canal top of bank 0 0.35 2 4 

CV-CHAN-BNCH 


DTMs) 

0 0.35 2 4 


CV-CHAN-TOE~ Channel/canal toe 3 0.50 5 1 


CV-DOMW-ABND- 

PIPE 






Floodwalls 








Liquid Fuel 








CV-GRAD-BNCH Bench Cut 0 0.35 6 5 


CV-GRAD-EXCV Excavation grade 0 0.50 4 7 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Grid Lines 

CV-GRID-FRAM Frame 0 0.50 4 7 

CV-GRID-MAJR Major grid lines 1 0.35 8 9 

CV-GRID-MINR Minor grid lines 1 0.18 8 9 

CV-GRID-TEXT Border text, annotation 1 0.35 2 4 

Heliports 







Irrigation 



Levees 

CV-LEVE-BANK-TOP~ Levee top of bank 0 0.35 2 4 






January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CV-LEVE-TOE~ Levee toe 2 0.35 20 6 

Natural Gas 





Overrun Areas 



Pads (Arm/Disarm. Calibration, etc.) 



Parking Lots 



Pavement 


Railroads 



Rivers 











January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 








Runways 



Site Features 




CV-SSWR-DEVC 



0 0.35 6 5 


IDEN 


















January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CV-SSWR-STNS- 

PUMP 



Storm Sewer 



















CV-STRM-STNS- 

PUMP 



Taxiways 





January 2010 


Model File Type: Elevations 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Irrigation 



Rivers 






Elevations 








January 2010 


Model File Type: X-Sections 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Aprons 






Bridges 

CV-BRDG-CHRD- 

LOW~ 

Low chord 0 0.50 4 7 



Channels 

CV-CHAN-BANK-TOP~ Channel/canal top of bank 0 0.35 2 4 

CV-CHAN-BNCH 


DTMs) 

0 0.35 2 4 


CV-CHAN-TOE~ Channel/canal toe 3 0.50 5 1 


CV-DOMW-ABND- 

PIPE 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 






Floodwalls 










Liquid Fuel 








CV-GRAD-ALOW Allowable over depth 0 0.35 6 5 

CV-GRAD-BNCH Bench cut 0 0.35 6 5 


CV-GRAD-EXCV Excavation grade 0 0.50 4 7 







January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 






CV-GRAD-REQD Required depth 0 0.35 6 5 



Grid Lines 

CV-GRID-FRAM Frame 0 0.50 4 7 

CV-GRID-MAJR Major grid lines 1 0.35 8 9 

CV-GRID-MINR Minor grid lines 1 0.18 8 9 

CV-GRID-TEXT Border text, annotation 1 0.35 2 4 

Heliports 







Irrigation 



Levees 

CV-LEVE-BANK-TOP~ Levee top of bank 0 0.35 2 4 









January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 






CV-LEVE-TOE~ Levee toe 2 0.35 20 6 

CV-LEVE-TOE~-IDEN Levee toe annotation 0 0.25 20 6 

Natural Gas 





Overrun Areas 



Pads (Arm/Disarm/Calibration, etc.) 



Parking Lots 



Property 





CV-PROP-RWAY- 

ACQU 




Pavement 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



Railroads 



Rivers 
















Runways 



Site Features 




CV-SSWR-DEVC 



0 0.35 6 5 

CV-SSWR-DEVC-IDEN Identifier tags, symbol modifier, and text 0 0.25 6 5 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 

















CV-SSWR-STNS- 

PUMP 



Storm Sewer 















January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 








CV-STRM-STNS- 

PUMP 



Taxiways 



Sections 

CV-SECT-IDEN Component identification numbers 0 0.35 2 4 

CV-SECT-MBND Material beyond section cut 0 0.18 5 1 

CV-SECT-MCUT 

Cuts through road surfaces, buildings, structures, fence lines, 

etc. 

V V V V 

CV-SECT-PATT Textures and hatch patterns 0 0.18 8 9 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Irrigation 





Details 

CV-DETL-GRPH Graphics, gridlines, non-text items V V V V 

CV-DETL-INPD Inch-pound-specific dimensions and notes 0 0.35 1 3 

CV-DETL-METR MetriCV-specific dimensions and notes 0 0.35 3 2 



January 2010 

4.7 Fueling Systems 

TABLE I-4-25 Discipline: Fueling Systems 

Model File Type: Subsurface Investigation Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



FU-ANNO-DIMS Witness/extension lines, dimension terminators, dimension tex 0 V V V 

FU-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

FU-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

FU-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

FU-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

FU-ANNO-RDME Read-me information 0 0.18 5 1 

FU-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

FU-ANNO-SYMB Miscellaneous symbols V V 6 5 

FU-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Existing Conditions 

FU-EXST-BLDG Existing building 0 0.25 1 3 

FU-EXST-COND Existing conditions 0 0.25 1 3 

Geophysical Borings 

FU-BORE-CONE Cone penetrometer test location 0 0.35 162 33 

FU-BORE-HOLE Geophysical boring locations 0 0.35 162 33 

FU-BORE-IDEN Geophysical location identification 0 0.35 2 4 

FU-BORE-LINE Geophysical transect lines 0 0.50 4 7 

FU-BORE-PUSH Direct push test location 0 0.35 162 33 

FU-BORE-STRK Geophysical strike line 0 0.35 162 33 

Consolidation Curve 

FU-CONS-DATA Consolidation curve data 0 0.25 6 5 

FU-CONS-DATA-TEXT Consolidation curve data text 0 0.25 6 5 

FU-CONS-FRAM Consolidation curve frame 0 0.50 4 7 

FU-CONS-GRID Consolidation curve grid 0 0.25 2 4 

FU-CONS-GRID-TEXT Consolidation curve grid text 0 0.25 2 4 

Water Content 

FU-H2OC-ATTB-DATA Water content Atterberg limits 0 0.25 3 2 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


FU-H2OC-ATTB-TEXT Water content Atterberg limits text 0 0.25 3 2 

FU-H2OC-GRID-MAJR Water content major grid 0 0.25 1 3 

FU-H2OC-GRID-MINR Water content minor grid 1 0.18 8 9 

FU-H2OC-GRID-TEXT Water content grid text 0 0.25 2 4 

FU-H2OC-MOIS-DATA Water content moisture content points and lines 0 0.25 6 5 

FU-H2OC-MOIS-TEXT Water content moisture content text 0 0.25 6 5 

Normal Stress 

FU-NORM-DATA Normal stress data 0 0.25 6 5 

FU-NORM-DATA-TEXT Normal stress data text 0 0.25 6 5 

FU-NORM-GRID-MAJR Normal stress major grid 0 0.25 1 3 

FU-NORM-GRID-MINR Normal stress minor grid 1 0.18 8 9 

FU-NORM-GRID-TEXT Normal stress grid text 0 0.25 2 4 

Plasticity Chart 

FU-PLAS-DATA Plasticity chart data 0 0.25 6 5 

FU-PLAS-DATA-TEXT Plasticity chart data text 0 0.25 4 7 

FU-PLAS-FRAM Plasticity chart frame 0 0.50 5 7 

FU-PLAS-GRID Plasticity chart grid 0 V V V 

FU-PLAS-GRID-TEXT Plasticity chart grid text 0 V V V 

Sample Locations 

FU-SAMP-AUGR Auger sample location 0 0.35 17 67 

FU-SAMP-CORE Core sample location 0 0.35 17 67 

FU-SAMP-DRVE Drive sample (shelby split spoon) location 0 0.35 17 67 

FU-SAMP-GRAB Grab sample location 0 0.35 17 67 

FU-SAMP-IDEN Sample location identification 0 0.35 2 4 

FU-SAMP-PERC Percolation test hole 0 0.50 83 42 

FU-SAMP-PITS Test pit sample location 0 0.50 83 42 

FU-SAMP-VERT Vertical core hole location 0 0.35 122 23 

FU-SAMP-WASH Wash bored hole location 0 0.35 122 23 

Shear Strength vs. Normal Stress 

FU-SSNS-DATA Shear strength vs. normal stress data 0 0.25 6 5 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


FU-SSNS-DATA-TEXT Shear strength vs. normal stress data text 0 0.25 6 5 

FU-SSNS-FRAM Shear strength vs. normal stress frame 0 0.50 4 7 

FU-SSNS-GRID Shear strength vs. normal stress grid 0 0.25 1 3 

FU-SSNS-GRID-TEXT Shear strength vs. normal stress grid text 0 V 2 4 

Shear Strength 

FU-SSTR-1TST-DATA Shear strength 1 Point Q test data 0 0.25 4 7 

FU-SSTR-1TST-TEXT Shear strength 1 Point Q test text 0 0.25 4 7 

FU-SSTR-GRID-MAJR Shear strength major grid 0 0.25 1 3 

FU-SSTR-GRID-MINR 

Shear strength minor grid 

1 0.18 8 9 

FU-SSTR-GRID-TEXT Shear strength grid text 0 0.25 2 4 

FU-SSTR-QTST-DATA Shear strength Q test data 0 0.25 6 5 

FU-SSTR-QTST-TEXT Shear strength Q test text 0 0.25 6 5 

FU-SSTR-RTST-DATA Shear strength R test data 0 0.25 2 4 

FU-SSTR-RTST-TEXT Shear strength R test text 0 0.25 2 4 

FU-SSTR-STST-DATA Shear strength S test data 0 0.25 5 1 

FU-SSTR-STST-TEXT Shear strength S test text 0 0.25 5 1 

FU-SSTR-UTST-DATA Shear strength UCT test data 0 0.25 3 2 

FU-SSTR-UTST-TEXT Shear strength UCT test text 0 0.25 3 2 

FU-SSTR-VTST-DATA Shear strength Vane shear test data 0 0.25 7 0 

FU-SSTR-VTST-TEXT Shear strength Vane shear test text 0 0.25 7 0 

Tabular Test 

FU-TABT-DATA Tabular test data 0 0.25 6 5 

FU-TABT-DATA-TEXT Tabular test data text 0 0.25 6 5 

FU-TABT-FRAM Tabular test data frame 0 0.50 4 7 

FU-TABT-GRID Tabular test data grid 0 0.25 1 3 

FU-TABT-GRID-TEXT Tabular test data grid text 0 V 2 4 

Wells 

FU-WELL-ASR ASR wells 0 0.35 82 18 

FU-WELL-MONT Monitoring wells 0 0.35 82 18 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


FU-WELL-PIZO Piezometers 0 0.35 82 18 

Wet Density 

FU-WETD-DATA Wet density data 0 0.25 6 5 

FU-WETD-DATA-TEXT Wet density data text 0 0.25 6 5 

FU-WETD-GRID-MAJR Wet density major grid 0 0.25 1 3 

FU-WETD-GRID-MINR Wet density minor grid 1 0.18 8 9 

FU-WETD-GRID-TEXT Wet density grid text 0 0.25 2 4 



January 2010 

4.8 Landscape 

TABLE I-4-26 Discipline: Landscape 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



LA-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

LA-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

LA-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

LA-ANNO-PATT Miscellaneous patterning 0 0 8 9 

LA-ANNO-NOTE General note and general remarks 0 2 2 4 

LA-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

LA-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

LA-STAT-DEMO Demolition 2 2 6 5 

LA-STAT-EXST Existing to remain 0 1 3 2 

LA-STAT-MOVE Items to be moved 5 2 6 5 

LA-STAT-NICN Not in contract 3 0 8 9 

LA-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

LA-STAT-RELO Relocated items 2 0 5 1 

LA-STAT-TEMP Temporary work 4 3 4 7 

LA-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Landscape Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



LA-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

LA-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

LA-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

LA-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

LA-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

LA-ANNO-RDME Read-me information 0 0.18 5 1 

LA-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

LA-ANNO-SYMB Miscellaneous symbols V V 6 5 

LA-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Plant and Landscape Material 

LA-PLNT-BEDS Planting beds (perennial and annual beds) 0 0.35 6 5 

LA-PLNT-BUSH Bushes and shrubs (e.g., evergreen, deciduous, etc.) 0 0.50 83 42 

LA-PLNT-BUSH-LINE Bush and shrub line 0 0.50 83 42 

LA-PLNT-CTNR Containers or planters 0 0.25 1 3 

LA-PLNT-GRND Groundcover and vines 0 0.35 82 18 

LA-PLNT-IDEN Annotation 0 0.35 6 5 

LA-PLNT-MLCH Mulches - organic and inorganic 0 0.25 3 2 

LA-PLNT-PLTS Planting plants (e.g., ornamental annuals and perennials 0 0.50 83 42 

LA-PLNT-SHAD Shadow areas 0 0.18 5 1 

LA-PLNT-SPRG Sprigs 0 0.25 3 2 

LA-PLNT-TREE 

Trees (e.g., evergreen, deciduous, etc.) 

0 0.50 83 42 

LA-PLNT-TREE-LINE Tree line TREEL 0.50 83 42 

LA-PLNT-TURF Lawn areas (turfing limits) 0 0.50 23 46 

Site Improvements 

LA-SITE-BRDG Bridges (pedestrian) 0 0.35 22 22 

LA-SITE-DECK Decks 0 0.35 232 107 

LA-SITE-FENC Fencing FENCE 0.35 2 4 

LA-SITE-FURN Furnishings 0 0.50 4 7 



January 2010 


Model File Type: Landscape Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


LA-SITE-IDEN Annotation 0 0.35 6 5 

LA-SITE-PLAY Play structures 0 0.35 2 4 

LA-SITE-POOL Pools and spas 0 0.35 162 33 

LA-SITE-ROCK Boulders and cobble 0 0.25 1 3 

LA-SITE-RTWL Retaining walls 0 0.50 4 7 

LA-SITE-SPRT Sports fields 0 0.35 2 4 

LA-SITE-WALK Walks and steps 0 V V V 



January 2010 


Model File Type: Irrigation Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



LA-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 









Irrigation System 

LA-IRRG-COVR Irrigation coverage, spray distribution patterns 0 0.18 5 1 

LA-IRRG-EQPM Equipment (e.g., controllers, valves, RPBPs, etc.) 0 0.35 6 5 

LA-IRRG-HEAD Irrigation heads, bubblers, and drip irrigation emitters 0 0.25 1 3 

LA-IRRG-IDEN Annotation 0 0.35 2 4 

LA-IRRG-PIPE Piping LAWNSP 0.35 6 5 

LA-IRRG-SPKL Sprinklers 0 0.35 6 5 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



LA-ANNO-DIMS Witness/extension lines, dimension terminators, dimension tex 0 V V V 










LA-DETLA-GRPH Graphics, gridlines, non-text items V V V V 

LA-DETLA-INPD Inch-pound specific dimensions and notes V V V V 

LA-DETLA-METR Metric specific dimensions and notes V V V V 



January 2010 

4.9 Structural Buildings 

TABLE I-4-30 Discipline: Structural Buildings 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ST-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

ST-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

ST-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

ST-ANNO-PATT Miscellaneous patterning 0 0 8 9 

ST-ANNO-NOTE General note and general remarks 0 2 2 4 

ST-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

ST-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

ST-STAT-DEMO Demolition 2 2 6 5 

ST-STAT-EXST Existing to remain 0 1 3 2 

ST-STAT-MOVE Items to be moved 5 2 6 5 

ST-STAT-NICN Not in contract 3 0 8 9 

ST-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

ST-STAT-RELO Relocated items 2 0 5 1 

ST-STAT-TEMP Temporary work 4 3 4 7 

ST-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Foundation Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ST-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

ST-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

ST-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

ST-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

ST-ANNO-PATT Patterning, poche, shading, and hatching 0 0.18 8 9 

ST-ANNO-RDME Read-me information 0 0.18 5 1 

ST-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

ST-ANNO-SYMB Miscellaneous symbols V V 6 5 

ST-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V v 

Access 

ST-ACCS-GLRY Galleries, crossovers, trenches, etc 0 0.35 30 86 

ST-ACCS-HTCH Hatches 0 0.25 32 102 

ST-ACCS-LADD Ladders and ladder safety devices 0 0.35 162 33 

ST-ACCS-STRS Stairs 0 0.35 133 111 

ST-ACCS-TUNL Tunnels 0 0.35 42 182 

Equipment Pads and Foundations 

ST-PADS-EQPM Equipment pads 0 0.35 21 30 

Erosion Control 

ST-EROS-BARR Vapor/capillary water barriers 0 0.25 233 115 

Fasteners & Connections 

ST-FSTN-ABLT Anchor bolts 0 0.25 30 86 

Foundations 

ST-FNDN-ANCH Anchor piles, blocks, strands, deadmen, soil/rock anchors 0 0.35 42 182 

ST-FNDN-CNTR Foundation centerlines 7 0.18 44 198 

ST-FNDN-DRAN Foundation drainage features and objects 0 0.25 43 206 

ST-FNDN-FTNG Footings 0 0.35 42 182 

ST-FNDN-FTNG-RBAR Footing rebar 0 0.70 5 1 

ST-FNDN-GRBM Grade beams 0 0.50 52 36 

ST-FNDN-PEDS Foundation pedestals/pads 0 0.35 41 190 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ST-FNDN-PIER Piers, drilled shafts, caissons 0 0.50 72 196 

ST-FNDN-PILE Piles 0 0.35 40 166 

ST-FNDN-RIBS Ribbed mat foundation 0 0.35 52 36 

ST-FNDN-TRMT Foundation treatment (grouting) 0 0.35 51 28 

ST-FNDN-TUNL Service tunnel/duct banks 0 0.35 42 182 

Grade Lines 

ST-GRLN-SURF-E Existing ground 3 0.25 31 110 

ST-GRLN-SURF-N Finished grade 0 0.35 32 102 

ST-WATR-SURF Water surface 0 0.25 161 25 

Joints 

ST-JNTST-CNTJ Construction/lift joints 0 0.25 122 23 

ST-JNTST-CTLJ Control/contraction joints (saw cut) 0 0.25 122 23 

ST-JNTST-EXPJ Expansion joints, joint materials (e.g., felt) 0 0.25 124 39 

ST-JNTST-WTRS Waterstops 0 0.25 221 189 

Fabrications (metal or other specialty) 

ST-FABR-EMBD Embedded metals (framing around openings) 0 0.35 183 201 

ST-FABR-PLAT Plates 0 0.35 142 183 

Reinforcement 

ST-REIN-RBAR Steel reinforcing, welded wire fabric 0 0.70 5 1 

Reference Outlines 

ST-OTLN-BLDG Building outline 6 0.25 5 1 

ST-OTLN-FLOR Floor outline 6 0.25 5 1 

ST-OTLN-OPNG Openings 6 0.25 5 1 

ST-OTLN-ROOF Roof 6 0.25 5 1 

ST-OTLN-STRC Misc. structures 6 0.25 5 1 

Slabs 

ST-SLAB-EDGE Edge of slab 0 0.35 41 190 

ST-SLAB-RBAR Slab rebar 0 0.70 5 1 

ST-SLAB-SECD Second pour, slab cap 0 0.35 41 190 

ST-SLAB-SILL Sill 0 0.35 41 190 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


Walls 

ST-WALL-LOAD Load bearing walls 0 0.35 3 2 

ST-WALL-NONL Non-load bearing walls 0 0.35 72 196 

ST-WALL-PCST Pre-cast concrete walls 0 0.35 126 55 

ST-WALL-SHEA Shear walls 0 0.35 101 186 

ST-WALL-STUD Stud walls 0 0.35 421 182 



January 2010 


Model File Type: Framing Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Access 

ST-ACCS-EVTR Elevators 0 0.35 132 103 

ST-ACCS-LADD Ladders and ladder safety devices 0 0.35 162 33 

ST-ACCS-STRS-FRMG Stair framing 0 0.35 135 127 

Beams 

ST-BEAM-CNTR Beam centerlines 7 0.18 214 117 

ST-BEAM-PRIM Continuous beam or primary beam of two-way beam system 0 0.50 211 109 

ST-BEAM-RBAR Beam rebar 0 0.70 5 1 

ST-BEAM-SECD Girders or secondary beams of two-way beam system 0 0.35 212 101 

Bracing 

ST-BRAC-DIAG Diagonal bracing 0 0.35 161 25 

ST-BRAC-HORZ Horizontal bracing 0 0.35 161 25 

ST-BRAC-VERT Vertical bracing 0 0.35 144 199 

Decking 

ST-DECK-FLOR Floor deck 0 0.25 101 186 

ST-DECK-ROOF Roof deck 0 0.25 62 116 


ST-FSTN-ABLT Anchor bolts 0 0.25 30 86 

ST-FSTN-MISC Fasteners and connections (non-specific) 0 0.25 13 35 



January 2010 



Gates 

ST-GATE-AXIS Gate axis and centerlines 7 0.18 214 117 

Joints 

ST-JNTST-CNTJ Construction/lift joints 0 0.25 122 23 

ST-JNTST-CTLJ Control/contraction joints (saw cut) 0 0.25 122 23 

ST-JNTST-EXPJ Expansion joints, joint materials (e.g., felt) 0 0.25 124 39 

ST-JNTST-STUC Stucco joints 0 0.25 111 246 

Joists 

ST-JOIST-BRDG Bridging 0 0.35 82 18 

ST-JOIST-GIRD Joist girders 0 0.50 122 23 

ST-JOIST-PERI Perimeter channel or rim joist 0 0.35 142 183 

ST-JOIST-PRIM Primary joists 0 0.35 132 103 

ST-JOIST-SECD Secondary joists 0 0.35 134 119 

ST-JOIST-TRIM Partial length or trimmer floor joist 0 0.35 134 119 


ST-FABR-EMBD Embedded metals (framing around openings) 0 0.35 183 201 

ST-FABR-PLAT Plates 0 0.35 142 183 

Platforms 

ST-PLAT-GRTG 

Reinforcement 

Platform grating (add a second minor group to indicate platform 

# or elev.) 

0 0.25 121 15 







Signs 

ST-SIGN-EXTN Extrusions 0 0.35 212 101 

ST-SIGN-FRMG Framing & connections 0 0.35 3 2 

ST-SIGN-PANL Sign panels 0 0.35 232 107 

ST-SIGN-SPRT Supports 0 0.35 5 1 

ST-SIGN-TEXT Signage text 0 0.35 222 181 

Stiffeners 

ST-STIF-LONG Stiffeners - longitudinal 0 0.35 3 2 



January 2010 



ST-STIF-TRAN Stiffeners - transverse 0 0.35 3 2 

Trusses 

ST-TRUST-PRIM Primary trusses 0 0.50 4 7 

ST-TRUST-SECD Secondary trusses 0 0.35 6 5 

Walls 

ST-WALL-FULL Wall going to the top of the structure 0 0.35 3 2 

ST-WALL-LOAD Load bearing walls 0 0.35 3 2 

ST-WALL-NONL Non-load bearing walls 0 0.35 72 196 

ST-WALL-PCST Pre-cast concrete walls 0 0.35 126 55 

ST-WALL-PRHT Wall that does not reach to the top of the structure 0 0.35 72 196 

ST-WALL-SHEA Shear walls 0 0.35 101 186 

ST-WALL-STUD Stud walls 0 0.35 421 182 



January 2010 


Model File Type: Column Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Columns 

ST-COLS-CNTR Column centerlines/working lines 7 0.18 40 166 

ST-COLS-POST Short columns 0 0.35 87 74 

ST-COLS-PRIM Primary columns 0 0.35 3 2 

ST-COLS-RBAR Column rebar 0 0.70 5 1 

ST-COLS-SECD Secondary columns 0 0.35 84 34 

Grids 

ST-GRID-HORZ Grid lines (horizontal) 7 0.18 6 5 

ST-GRID-HORZ-IDEN Column I.D. tags (horizontal) 0 0.25 6 5 

ST-GRID-VERT Grid lines (vertical) 7 0.18 6 5 

ST-GRID-VERT-IDEN Column I.D. tags (vertical) 0 0.25 6 5 

Reinforcement 









January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 





ST-ANNO-NPLT Non-plotting graphic information V 0.18 5 1 

ST-ANNO-PATT Miscellaneous patterning and hatching 0 0.18 8 9 


ST-ANNO-SYMB Miscellaneous symbols V 0.35 6 5 

ST-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

ST-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 

Beams 

ST-BEAM-CNTR Beam centerlines 7 0.18 5 1 

ST-BEAM-PRIM Primary beams/girders outlines 0,2 0.50 4 7 

ST-BEAM-SECD Secondary beams/girders outlines 0,2 0.35 6 5 

Joints 

ST-JOIN-CNST Construction joints 0 0.25 3 2 

ST-JOIN-CTRL Control/expansion joints 0 0.25 1 3 

Miscellaneous Supports 

ST-SPPT-MISC Miscellaneous fasteners, anchor bolts, supports 0,2 0.25 3 2 

ST-SPPT-SHPS Miscellaneous shapes, plates 0,2 0.25 3 2 

Walls 

ST-WALL-OTLN Wall outline 0,2 0.35 2 4 

ST-WALL-VBAR Vertical/primary reinforcement 0,2 0.50 4 7 

ST-WALL-HBAR Horizontal/secondary reinforcement 0,2 0.50 4 7 

ST-WALL-OPEN Openings and penetrations 0,2 0.25 1 3 

Demolition (used only in creating Existing/Demolition model files) 

ST-STAT-DEMO- 

PHS1 

ST-STAT-DEMO- 

PHS2 

ST-STAT-DEMO- 

PHS3 

Demolition-phase 1 0 0.50 203 45 





January 2010 



Note: V=Varies, NA=Not Applicable 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 





ST-ANNO-NPLT Non-plotting graphic information V 0.18 B/5 B/1 

ST-ANNO-PATT Miscellaneous patterning and hatching 0 0.18 Gr/8 Gr/9 

ST-ANNO-NOTE General notes and general remarks 0 0.35 Y/2 Y/4 

ST-ANNO-SYMB Miscellaneous symbols V 0.35 M/6 M/5 



Section Information 

ST-SECT-GENF General features (miscellaneous items) 0,2 0.35 M/6 M/5 

ST-SECT-CMUW CMU outline (no patterning) 0,2 0.35 Y/2 Y/4 

ST-SECT-CNTR Centerlines 7 0.18 B/5 B/1 

ST-SECT-PRIM Primary beams. girders outlines 0,2 0.50 C/4 C/7 

ST-SECT-CONC Concrete outline (no patterning) 0,2 0.35 M/6 M/5 

ST-SECT-WOOD Wood outline (no patterning) 0,2 0.35 Y/2 Y/4 

ST-SECT-JOIN Joint materials (e.g. felt), vapor barrier, other 0,2 0.25 R/1 R/3 

ST-SECT-STLS Wide flange shapes, plates, open web joints, decking 0,2 0.25 G/3 G/2 

ST-SECT-MISC Miscellaneous fasteners, anchor bolts, supports 0,2 0.25 G/3 G/2 

ST-SECT-SHPS Miscellaneous shapes, plates 0,2 0.25 G/3 G/2 

ST-SECT-RBAR Rebar, welded wire mesh 0,2,WWF 

BRC 

0.70 W/7 W/0 

ST-SECT-FNGR Finished grade O 0.35 Y/2 Y/4 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ST-ANNO-DIMS 

Witness/extension lines, dimension terminators, dimension text, 

welding symbols 

0 V V V 


ST-ANNO-NPLT Non-plotting graphic information V 0.18 B/5 B/1 

ST-ANNO-PATT Miscellaneous patterning and hatching 0 0.18 Gr/8 Gr/9 

ST-ANNO-NOTE General notes and general remarks 0 0.35 Y/2 Y/4 

ST-ANNO-SYMB Miscellaneous symbols V 0.35 M/6 M/5 




ST-DETL-GRPH Graphics, gridlines, non-text items V V V V 

ST-DETL-METR Metric-specific dimensions and notes 0 0.35 Y/2 Y/4 

ST-DETL-INPD Inch-pound-specific dimensions and notes 0 0.35 Y/2 Y/4 

Demolition 

ST-STAT-DEMO- 

PHS1 

ST-STAT-DEMO- 

PHS2 

ST-STAT-DEMO- 

PHS3 







January 2010 

4.10 Structural Civil 

TABLE I-4-37 Discipline: Structural Civil 

Model File Type: Substructure 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



SC-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

SC-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

SC-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

SC-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

SC-ANNO-PATT Patterning, poche, shading, and hatching 0 0.18 8 9 

SC-ANNO-RDME Read-me information 0 0.18 5 1 

SC-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

SC-ANNO-SYMB Miscellaneous symbols V V 6 5 

SC-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V v 

Access 

SC-ACCS-LADD Ladders and ladder safety devices 0 0.35 162 33 

SC-ACCS-MHOL Manholes 0 0.35 83 42 

SC-ACCS-MISC Miscellaneous access 0 0.35 83 42 

SC-ACCS-STRS Stairs 0 0.35 133 111 

SC-ACCS-STRS- 

FRMG 

Stair framing 0 0.35 135 127 

SC-ACCS-TUNL Tunnels 0 0.35 42 182 

Bridges 

SC-BRDG-ABUT Abutments 0 0.50 83 42 

SC-BRDG-ABUT- 

RBAR 

Abutment rebar 0 0.70 5 1 

SC-BRDG-BEAR Bridge bearing 0 0.35 152 88 

SC-BRDG-BEAR- 

CNTR 

Bridge bearing centerlines 7 0.18 214 117 

SC-BRDG-BENT Bent cap 0 0.35 3 2 

SC-BRDG-BENT- 

CNTR 

SC-BRDG-BENT- 

RBAR 

Centerline of bents 7 0.18 214 117 

Bent cap rebar 0 0.70 5 1 

SC-BRDG-PIER Piers 0 0.50 83 42 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


Columns 

SC-COLS-CNTR Column centerlines/working lines 7 0.18 40 166 

SC-COLS-PRIM Primary columns 0 0.35 3 2 

SC-COLS-RBAR Column rebar 0 0.70 5 1 

SC-COLS-SECD Secondary columns 0 0.35 84 34 


SC-FSTN-ABLT Anchor bolts 0 0.25 30 86 

SC-FSTN-MISC Fasteners and connections (non-specific) 0 0.25 13 35 

Foundations 

SC-FNDN-ANCH Anchor piles, blocks, strands, deadmen, soil/rock anchors 0 0.35 42 182 

SC-FNDN-CNTR Foundation centerlines 7 0.18 44 198 

SC-FNDN-DRAN Foundation drainage features and objects 0 0.25 43 206 

SC-FNDN-FTNG Footings 0 0.35 42 182 

SC-FNDN-FTNG-RBAR Footing rebar 0 0.70 5 1 

SC-FNDN-PEDS Foundation pedestals/pads 0 0.35 41 190 

SC-FNDN-PILE Piles 0 0.35 40 166 

SC-FNDN-TRMT Foundation treatment (grouting) 0 0.35 51 28 

Grade Lines 

SC-GRLN-SURF-E Existing ground 3 0.25 31 110 

SC-GRLN-SURF-N Finished grade 0 0.35 32 102 

SC-WATR-SURF Water surface 0 0.25 161 25 


SC-FABR-EMBD Embedded metals (framing around openings) 0 0.35 183 201 

SC-FABR-PLAT Plates 0 0.35 142 183 

Platforms 

SC-PLAT-FRMG Platform frame/stringers 0 0.35 212 101 

SC-PLAT-GRTG 

Platform grating (add a second minor group to indicate 

platform # or elev.) 

0 0.25 121 15 

SC-PLAT-WALK Platform walkway 0 0.35 33 126 

Reinforcement 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


SC-REIN-RBAR Steel reinforcing, welded wire fabric 0 0.70 5 1 


SC-OTLN-STRC Misc. structures 6 0.25 5 1 

Walls 

SC-WALL-ABUT Abutments 0 0.35 83 42 

SC-WALL-COFF Cutoff wall 0 0.35 30 86 

SC-WALL-CURT Curtain/breast wall 0 0.35 72 196 

SC-WALL-MSEW Mechanically stabilized earth (MSE) wall 0 0.35 72 196 

SC-WALL-RTWL Retaining wall (flood walls, wingwalls, etc.) 0 0.35 72 196 

Waterway Specialties 

SC-WWAY-DLPH 

Dolphins (associated with but not part of bridges, locks and 

guidewalls) 

0 0.35 122 23 

SC-WWAY-FEND Fenders 0 0.35 75 220 

SC-WWAY-MOOR Mooring cells 0 0.35 142 183 



January 2010 


Model File Type: Decks 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Access 

SC-ACCS-HTCH Hatches 0 0.25 32 102 


SC-ACCS-MHOL Manholes 0 0.35 83 42 

SC-ACCS-MISC Miscellaneous access 0 0.35 83 42 

Bridges 

SC-BRDG-DRAN Drains 0 0.25 22 22 

Decking 

SC-DECK-BRDG Bridge deck 0 0.35 22 22 

SC-DECK-BRDG- 

RBAR 

Bridge deck rebar 0 0.70 5 1 




Grids 

SC-GRID-HORZ Grid lines (horizontal) 7 0.18 6 5 

SC-GRID-HORZ-IDEN Column I.D. tags (horizontal) 0 0.25 6 5 

SC-GRID-VERT Grid lines (vertical) 7 0.18 6 5 

SC-GRID-VERT-IDEN Column I.D. tags (vertical) 0 0.25 6 5 

Joints 



January 2010 


Model File Type: Decks 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


SC-JNTST-CNTJ Construction/lift joints 0 0.25 122 23 

SC-JNTST-CTLJ Control/contraction joints (saw cut) 0 0.25 122 23 

SC-JNTST-EXPJ Expansion joints, joint materials (e.g., felt) 0 0.25 124 39 

SC-JNTST-WTRS Waterstops 0 0.25 221 189 




Platforms 


SC-PLAT-GRTG 

Platform grating (add a second minor group to indicate platform 

# or elev.) 

0 0.25 121 15 


Reinforcement 


SC-REIN-TEND-HORZ Horizontal Tendons 0 0.50 181 185 

SC-REIN-TEND-VERT Vertical Tendons 0 0.50 181 185 



Safety Features 

SC-SAFE-FENC Fencing rails, fabric, supports, and gates 0 0.25 3 2 

SC-SAFE-GRAL Guardrails 0 0.35 62 116 

SC-SAFE-HRAL Handrails, railings 0 0.25 3 2 

SC-SAFE-PARA Parapet/jersey barrier 0 0.50 3 2 

SC-SAFE-PARA-RBAR Parapet/jersey barrier rebar 0 0.70 5 1 

SC-SAFE-WATR Waterway safety barriers 0 0.35 3 2 

Slabs 

SC-SLAB-EDGE Edge of slab 0 0.35 41 190 

SC-SLAB-RBAR Slab rebar 0 0.70 5 1 

SC-SLAB-SECD Second pour, slab cap 0 0.35 41 190 

SC-SLAB-SILL Sill 0 0.35 41 190 



January 2010 


Model File Type: Superstructure 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Access 


SC-ACCS-STRS Stairs 0 0.35 133 111 

SC-ACCS-STRS- 

FRMG 

Stair framing 0 0.35 135 127 

Beams 

SC-BEAM-CNTR Beam centerlines 7 0.18 214 117 

SC-BEAM-PRIM Continuous beam or primary beam of two-way beam system 0 0.50 211 109 

SC-BEAM-RBAR Beam rebar 0 0.70 5 1 

SC-BEAM-SECD Girders or secondary beams of two-way beam system 0 0.35 212 101 

Bracing 

SC-BRAC-DIAG Diagonal bracing 0 0.35 161 25 

SC-BRAC-HORZ Horizontal bracing 0 0.35 161 25 

SC-BRAC-VERT Vertical bracing 0 0.35 144 199 

Bridges 

SC-BRDG-BEAR Bridge bearing 0 0.35 152 88 

SC-BRDG-BEAR- 

CNTR 

Bridge bearing centerlines 7 0.18 214 117 

SC-BRDG-CURB Curbs/sidewalks on structure 0 0.35 2 4 

SC-BRDG-DIAP Diaphragms 0 0.35 5 1 

SC-BRDG-DIAP-RBAR Diaphragm rebar 0 0.70 5 1 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


SC-BRDG-DRAN Drains 0 0.25 22 22 

SC-BRDG-FENC Fencing rails, fabric, supports, and gates 0 0.25 3 2 

SC-BRDG-FEND Fenders 0 0.35 75 220 

SC-BRDG-GIRD Girders 0 0.35 70 180 

SC-BRDG-GIRD-CNTR Girder centerline 7 0.18 214 117 

SC-BRDG-HEAD Headers 0 0.35 112 247 

SC-BRDG-STRG Stringers 0 0.35 212 101 




Gates 

SC-GATE-AXIS Gate axis and centerlines 7 0.18 214 117 

Grids 

SC-GRID-HORZ Grid lines (horizontal) 7 0.18 6 5 

SC-GRID-HORZ-IDEN Column I.D. tags (horizontal) 0 0.25 6 5 

SC-GRID-VERT Grid lines (vertical) 7 0.18 6 5 

SC-GRID-VERT-IDEN Column I.D. tags (vertical) 0 0.25 6 5 

Joints 

SC-JNTST-CNTJ Construction/lift joints 0 0.25 122 23 

SC-JNTST-EXPJ Expansion joints, joint materials (e.g., felt) 0 0.25 124 39 



SC-FABR-HOIS Hoist structures 0 0.25 142 183 


Platforms 



Reinforcement 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


SC-REIN-TEND-HORZ Horizontal Tendons 0 0.50 181 185 

SC-REIN-TEND-VERT Vertical Tendons 0 0.50 181 185 



Safety Features 

SC-SAFE-GRAL Guardrails 0 0.35 62 116 

SC-SAFE-HRAL Handrails, railings 0 0.25 3 2 

SC-SAFE-PARA Parapet/jersey barrier 0 0.50 3 2 

SC-SAFE-PARA-RBAR Parapet/jersey barrier rebar 0 0.70 5 1 

Signs 

SC-SIGN-PANL Sign panels 0 0.35 232 107 

Slabs 

SC-SLAB-APPR Approach slab 0 0.35 41 190 

SC-SLAB-APPR-RBAR Approach slab rebar 0 0.70 5 1 

SC-SLAB-EDGE Edge of slab 0 0.35 41 190 

SC-SLAB-RBAR Slab rebar 0 0.70 5 1 

SC-SLAB-SECD Second pour, slab cap 0 0.35 41 190 

SC-SLAB-SILL Sill 0 0.35 41 190 

Stiffeners 

SC-STIF-LONG Stiffeners - longitudinal 0 0.35 3 2 

SC-STIF-TRAN Stiffeners - transverse 0 0.35 3 2 

Trusses 

SC-TRUST-PRIM Primary trusses 0 0.50 4 7 

SC-TRUST-SECD Secondary trusses 0 0.35 6 5 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 





SC-ANNO-NPLT Non-plotting graphic information V 0.18 5 1 

SC-ANNO-PATT Miscellaneous patterning and hatching 0 0.18 8 9 


SC-ANNO-SYMB Miscellaneous symbols V 0.35 6 5 

SC-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

SC-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 

Beams 

SC-BEAM-CNTR Beam centerlines 7 0.18 5 1 

SC-BEAM-PRIM Primary beams/girders outlines 0,2 0.50 4 7 

SC-BEAM-SECD Secondary beams/girders outlines 0,2 0.35 6 5 

Joints 

SC-JOIN-CNST Construction joints 0 0.25 3 2 

SC-JOIN-CTRL Control/expansion joints 0 0.25 1 3 

Miscellaneous Supports 

SC-SPPT-MISC Miscellaneous fasteners, anchor bolts, supports 0,2 0.25 3 2 

SC-SPPT-SHPS Miscellaneous shapes, plates 0,2 0.25 3 2 

Walls 

SC-WALL-OTLN Wall outline 0,2 0.35 2 4 

SC-WALL-VBAR Vertical/primary reinforcement 0,2 0.50 4 7 

SC-WALL-HBAR Horizontal/secondary reinforcement 0,2 0.50 4 7 

SC-WALL-OPEN Openings and pentrations 0,2 0.25 1 3 

Demolition (used only in creating Existing/Demolition model files) 

SC-STAT-DEMO- 

PHS1 

SC-STAT-DEMO- 

PHS2 

SC-STAT-DEMO- 

PHS3 






January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 





January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 











Section Information 

SC-SECT-GENF General features (miscellaneous items) 0,2 0.35 6 5 

SC-SECT-CMUW CMU outline (no patterning) 0,2 0.35 2 4 

SC-SECT-CNTR Centerlines 7 0.18 5 1 

SC-SECT-PRIM Primary beams. girders outlines 0,2 0.50 4 7 

SC-SECT-CONC Concrete outline (no patterning) 0,2 0.35 6 5 

SC-SECT-WOOD Wood outline (no patterning) 0,2 0.35 2 4 

SC-SECT-JOIN Joint materials (e.g. felt), vapor barrier, other 0,2 0.25 1 3 

SC-SECT-STLS Wide flange shapes, plates, open web joints, decking 0,2 0.25 3 2 

SC-SECT-MISC Miscellaneous fasteners, anchor bolts, supports 0,2 0.25 3 2 

SC-SECT-SHPS Miscellaneous shapes, plates 0,2 0.25 3 2 

SC-SECT-RBAR Rebar, welded wire mesh 0,2,WWF 

BRC 

0.70 7 0 

SC-SECT-FNGR Finished grade O 0.35 2 4 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



SC-ANNO-DIMS 


welding symbols 

0 V V V 









SC-DETL-GRPH Graphics, gridlines, non-text items V V V V 

SC-DETL-METR Metric-specific dimensions and notes 0 0.35 2 4 

SC-DETL-INPD Inch-pound-specific dimensions and notes 0 0.35 2 4 

Demolition 

SC-STAT-DEMO- 

PHS1 

SC-STAT-DEMO- 

PHS2 

SC-STAT-DEMO- 

PHS3 







January 2010 

4.11 Architectural 

TABLE I-4-43 Discipline: Architectural 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



AR-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

AR-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

AR-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

AR-ANNO-PATT Miscellaneous patterning 0 0 8 9 

AR-ANNO-NOTE General note and general remarks 0 2 2 4 

AR-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

AR-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

AR-STAT-DEMO Demolition 2 2 6 5 

AR-STAT-EXST Existing to remain 0 1 3 2 

AR-STAT-MOVE Items to be moved 5 2 6 5 

AR-STAT-NICN Not in contract 3 0 8 9 

AR-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

AR-STAT-RELO Relocated items 2 0 5 1 

AR-STAT-TEMP Temporary work 4 3 4 7 

AR-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Floor Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



AR-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

AR-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

AR-ANNO-MASK Text/shape mask for use with photo backgrounds 0 0.18 113 16 

AR-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

AR-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

AR-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

AR-ANNO-RDME Read-me information 0 0.18 5 1 

AR-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

AR-ANNO-SYMB Miscellaneous symbols V V 6 5 

AR-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Columns 

AR-COLS-ENCL Column enclosures/fire protection 0 0.50 4 7 

Doors 

AR-DOOR-FULL Full height (to ceiling) door: swing and leaf 0 0.25 3 2 

AR-DOOR-IDEN Door number and symbol, hardware group, etc. 0 0.25 3 2 

AR-DOOR-PRHT Partial height door: swing and leaf 0 0.35 6 5 

AR-DOOR-SYMB Miscellaneous door symbols (e.g., overhead, bifold, pocket, etc) 0 0.25 1 3 


AR-FLOR-CASE Casework (manufactured cabinets) 0 0.25 3 2 

AR-FLOR-EVTR Elevator cars and equipment 0 0.35 2 4 

AR-FLOR-FIXT Plumbing fixtures 0 0.25 201 29 

AR-FLOR-HRAL Stair and balcony handrails, guard rails 0 0.25 1 3 

AR-FLOR-IDEN Room name, space identification text 0 0.35 3 2 

AR-FLOR-LEVL 

Level changes, shafts, ramps, pits, breaks in construction, and 

depressions 

0 0.35 6 5 

AR-FLOR-NUMB Room/space identification number and symbol 0 0.35 3 2 

AR-FLOR-OTLN Floor outline/perimeter/building footprint 0 0.50 4 7 

AR-FLOR-OTLN-RPRM Room perimeter shape (interior walls) 0 0.35 2 4 

AR-FLOR-OVHD Overhead items (skylights, overhangs, etc.) 2 0.18 8 9 



January 2010 


Model File Type: Floor Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


AR-FLOR-PATT Paving, tile, carpet patterns 0 0.18 8 9 

AR-FLOR-RAIS Access (raised) flooring 0 0.25 3 2 

AR-FLOR-SIGN Signage 0 0.25 1 3 

AR-FLOR-SPCL 

Architectural specialties (e.g., toilet room accessories, display 

cases) 

0 0.25 3 2 

AR-FLOR-STRS Stair risers/treads, escalators, ladders 0 0.25 1 3 

AR-FLOR-TPTN Toilet partitions 0 0.25 1 3 

AR-FLOR-WDWK Architectural woodwork (field built cabinets and counters) 0 0.25 3 2 

Windows 

AR-GLAZ-FULL 

Full height glazed walls and partitions (see AR-WALL-CWMG 

for curtain walls) 

0 0.25 1 3 

AR-GLAZ-IDEN Window number and symbol 0 0.35 3 2 

AR-GLAZ-PRHT Windows and partial height glazed partitions 0 0.25 1 3 

AR-GLAZ-SILL Window sills 0 0.18 5 1 

Walls 

AR-WALL-CAVI Cavity wall lines 0 0.18 8 9 

AR-WALL-CNTR Wall centerlines 7 0.18 5 1 

AR-WALL-CWMG Curtain wall mullions and glass 0 0.25 1 3 

AR-WALL-FIRE Fire wall designators (patterning) 0 0.35 2 4 

AR-WALL-FULL-EXTR Exterior full height walls 0 0.35 2 4 

AR-WALL-FULL-INTR Interior full height walls 0 0.25 3 2 

AR-WALL-HEAD Door and window headers 0 0.25 1 3 

AR-WALL-IDEN Wall identification/type text or tags 0 0.35 3 2 

AR-WALL-JAMB Door and window jambs 0 0.25 1 3 

AR-WALL-MOVE Moveable walls/partitions 0 0.18 5 1 

AR-WALL-OPEN-LVRS Louvers 0 0.25 1 3 

AR-WALL-PATT Wall insulation, hatching, and fill INBATT 0.18 8 9 

AR-WALL-PRHT Partial height walls (do not appear on Reflected Ceiling Plan) 0 0.25 1 3 

AR-WALL-SPCL 

Wall-hung/attached specialties (e.g., fixtures, grab bars (incl. 

handicap), telephone booths) 

0 0.25 1 3 



January 2010 


Model File Type: Reflected Ceiling Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Ceiling Information 

AR-CLNG-ACCS Access panels 0 0.35 6 5 

AR-CLNG-CTLJ Ceiling control joints 0 0.35 2 4 

AR-CLNG-GRID Ceiling grid 0 0.25 1 3 

AR-CLNG-LITE Specialty ceiling lights not shown on the Electrical Lighting Plan 0 0.50 4 7 

AR-CLNG-OPNG 

Openings, ceiling/roof penetrations (see also AR-FLOR-OVHD 

in Floor Plan model file 

0 0.18 8 9 

AR-CLNG-PATT Ceiling patterns 0 0.18 8 9 

AR-CLNG-SFFT Soffits 0 0.25 2 4 

AR-CLNG-SUSP 

Suspended elements, ceiling mounted specialties (e.g., clocks, 

fans, etc. 

0 0.18 5 1 

AR-CLNG-TEES Main tees 0 0.18 5 1 



January 2010 

TABLE 46 Discipline: Architectural 

Model File Type: Roof Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Roof Information 

AR-ROOF-CRTS Crickets flow arrows flow info 0 0.25 1 3 

AR-ROOF-EXPJ Expansion joints 0 0.18 5 1 

AR-ROOF-GUTR Roof internal gutters 0 0.18 8 9 

AR-ROOF-HRAL Stair handrails, nosings, guard rails 0 0.18 5 1 

AR-ROOF-LEVL Level changes 0 0.18 5 1 

AR-ROOF-OTLN Roof perimeter/edge, roof geometry 0 0.35 6 5 

AR-ROOF-PATT Roof surface patterns, hatching 0 0.18 8 9 

AR-ROOF-RFDR Roof drains 0 0.25 1 3 

AR-ROOF-SPCL Roof specialties, accessories, access hatches, dormers 0 0.25 3 2 

AR-ROOF-STRS Stair risers/treads, ladders 0 0.18 5 1 

AR-ROOF-WALK Roof walkways 0 0.25 3 2 

AR-ROOF-WALL Parapet walls and wall caps 0 0.35 2 4 



January 2010 


Model File Type: Equipment Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Equipment 

AR-EQPM-ACCS Equipment access 0 0.35 6 5 

AR-EQPM-FIXD Fixed equipment 0 0.50 4 7 

AR-EQPM-IDEN Equipment identification numbers 0 0.35 6 5 

AR-EQPM-MOVE Moveable equipment 0 0.35 6 5 

AR-EQPM-OVHD Overhead, ceiling mounted, or suspended equipment 0 0.35 6 5 



January 2010 


Model File Type: Area Calculations/Occupancy Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Area Information 

AR-AREA-IDEN Room numbers, tenant identifications, area calculations 0 0.35 2 4 

AR-AREA-LINE Architectural area calculation boundary lines 0 0.50 4 7 

AR-AREA-OCCP Occupant or employee names 0 0.35 2 4 

AR-AREA-PATT Area cross hatching 0 0.18 8 9 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Elevations 

AR-ELEV-CASE Wall-mounted casework 0 0.25 3 2 

AR-ELEV-FIXT Plumbing fixtures 0 0.35 2 4 

AR-ELEV-FNSH Finishes, woodwork, trim 0 0.25 3 2 

AR-ELEV-IDEN Component identification numbers 0 0.35 2 4 

AR-ELEV-OTLN Building outlines 0 0.50 4 7 

AR-ELEV-PATT Textures and hatch patterns 0 0.18 8 9 

AR-ELEV-SIGN Signage 0 0.25 1 3 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Sections 

AR-SECT-IDEN Component identification numbers 0 0.35 2 4 

AR-SECT-MBND Material beyond section cut 0 0.18 5 1 

AR-SECT-MCUT Material cut by section V V V V 

AR-SECT-PATT Textures and hatch patterns 0 0.18 8 9 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 














AR-DETL-GRPH Graphics, gridlines, non-text items V V V V 

AR-DETL-INPD Inch-pound specific dimensions and notes 0 V V V 

AR-DETL-METR Metric specific dimensions and notes 0 V V V 



January 2010 

4.12 Interiors 

TABLE I-4-51 Discipline: Interiors 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



IN-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

IN-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

IN-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

IN-ANNO-PATT Miscellaneous patterning 0 0 8 9 

IN-ANNO-NOTE General note and general remarks 0 2 2 4 

IN-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

IN-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

IN-STAT-DEMO Demolition 2 2 6 5 

IN-STAT-EXST Existing to remain 0 1 3 2 

IN-STAT-MOVE Items to be moved 5 2 6 5 

IN-STAT-NICN Not in contract 3 0 8 9 

IN-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

IN-STAT-RELO Relocated items 2 0 5 1 

IN-STAT-TEMP Temporary work 4 3 4 7 

IN-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Furniture Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



IN-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

IN-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

IN-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

IN-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

IN-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

IN-ANNO-RDME Read-me information 0 0.18 5 1 

IN-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

IN-ANNO-SYMB Miscellaneous symbols V V 6 5 

IN-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Equipment 

IN-EQPM-ACCS Equipment access 2 0.18 8 9 

IN-EQPM-CHLD Child development (play toys, teaching rugs, play forms) 0 0.35 2 4 

IN-EQPM-COPY Copiers, fax machines, office equipment 0 0.35 2 4 

IN-EQPM-FIXD Fixed equipment 0 0.18 5 1 

IN-EQPM-IDEN Equipment identification numbers 0 0.25 1 3 

IN-EQPM-MEDI Medical (exam beds, dental chairs, etc.) 0 0.35 2 4 

IN-EQPM-MOVE Moveable equipment 2 0.18 5 1 

IN-EQPM-OVHD Overhead, ceiling mounted, and suspended equipment 0 0.25 3 2 

IN-EQPM-STOR Storage equipment 0 0.35 2 4 

Furnishings 

IN-FURN-ACCS 

Accessories (vestibule matts, partitions, draperies, clocks, trash 

cans, lecturns, lamps, etc. 

0 0.25 1 3 

IN-FURN-ADPC Automated Data Processing Components 0 0.35 2 4 

-FURN-ARTW Artwork 0 0.35 2 4 

IN-FURN-FLOR Flooring (carpet, rugs, etc.) 0 0.35 2 4 

IN-FURN-FREE 

Free-standing furnishings (desks, beds, tables, dressers, 

credenzas, casegoods) 

0 0.35 6 5 

IN-FURN-GRID Planning grid/modular outline 0 0.50 4 7 

IN-FURN-IDEN Furniture code identification 0 0.25 3 2 

IN-FURN-PLNT Plants 0 0.25 3 2 



January 2010 


Model File Type: Furniture Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


IN-FURN-SEAT Seating (chairs, sofas, etc.) 0 0.35 2 4 

IN-FURN-STOR File cabinets, high density storage, shelving, storage cabinets 0 0.35 2 4 



January 2010 


Model File Type: System Furniture Workstation Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












System Furniture 

IN-SYST-FURN Furniture 0 0.35 2 4 

IN-SYST-IDEN Code identification components 0 0.25 1 3 

IN-SYST-IDPL Code identification panels 0 0.25 1 3 

IN-SYST-LITE Lighting components 0 0.50 4 7 

IN-SYST-PATT Patterns 0 0.18 8 9 

IN-SYST-PNLS Panels 0 0.35 2 4 

IN-SYST-POWR Power, communication components 0 0.50 4 7 

IN-SYST-STOR Storage components 0 0.35 2 4 

IN-SYST-WALL System furniture partition walls 0 0.35 2 4 

IN-SYST-WKSF Work surface components 0 0.35 2 4 



January 2010 


Model File Type: Signage Placement Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Signage 

IN-FLOR-SIGN Signage 0 0.35 6 5 



January 2010 


Model File Type: Floor Patterns 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Carpet/Carpet Tile 

IN-CRPT-ROLL-ACNT Carpet (roll goods) - accent color 0 V 1 3 

IN-CRPT-ROLL-FILD Carpet (roll goods) - field color 0 V 60 100 

IN-CRPT-TILE-ACN1 Carpet tile - accent color 0 V 208 69 

IN-CRPT-TILE-ACN2 Carpet tile - accent color 0 V 236 139 

IN-CRPT-TILE-FILD Carpet tile - field color 0 V 204 37 

Flooring Items and Materials 

IN-FLRG-MATS Entrance mat components and frames 0 V 4 7 

IN-FLRG-STON Stone flooring 0 V 153 104 

IN-FLRG-TRAN All floor thresholds and transition moldings 0 V 5 1 

IN-FLRG-WOOD Wood parquet tile or planks 0 V 22 22 

Monolithic (Poured of Broadcast) Flooring 

IN-MONO-SRFL-ACNT Seamless resinous flooring - accent color 0 V 203 45 

IN-MONO-SRFL-FILD Seamless resinous flooring - field color 0 V 9 14 

IN-MONO-TERR-ACN1 Terrazzo - accent color 0 V 144 199 

IN-MONO-TERR-ACN2 Terrazzo - accent color 0 V 67 156 

IN-MONO-TERR-FILD Terrazzo - field color 0 V 239 163 

Resilient Flooring 

IN-SHTP-ACNT Sheet product (vinyl/rubber/linoleum) - accent color 0 V 190 245 

IN-SHTP-FILD Sheet product (vinyl/rubber/linoleum) - field color 0 V 241 179 



January 2010 


Model File Type: Floor Patterns 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


Tile 

IN-TILE-CERM-ACNT Ceramic mosaic tile - accent color 0 V 153 104 

IN-TILE-CERM-FILD Ceramic mosaic tile - field color 0 V 124 39 

IN-TILE-LINO-ACNT Linoleum tile - accent color 0 V 236 139 

IN-TILE-LINO-FILD Linoleum tile - field color 0 V 60 100 

IN-TILE-PORC-ACN1 Porcelain tile - accent color 0 V 78 244 

IN-TILE-PORC-ACN2 Porcelain tile - accent color 0 V 9 14 

IN-TILE-PORC-FILD Porcelain tile - field color 0 V 128 71 

IN-TILE-QUAR-ACNT Quarry tile - accent color 0 V 2 4 

IN-TILE-QUAR-FILD Quarry tile - field color 0 V 30 86 

IN-TILE-RUBB-ACNT Rubber tile - accent color 0 V 209 93 

IN-TILE-RUBB-FILD Rubber tile - field color 0 V 20 6 

IN-TILE-TERR-ACN1 Terrazzo tile - accent color 0 V 144 199 



IN-TILE-TERR-FILD Terrazzo tile - field color 0 V 239 163 

IN-TILE-VNYL-ACN1 Vinyl or Vinyl composition tile - accent color 0 V 203 45 

IN-TILE-VNYL-ACN2 Vinyl or Vinyl composition tile - accent color 0 V 115 48 

IN-TILE-VNYL-FILD Vinyl or Vinyl composition tile - field color 0 V 89 90 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Elevations 

IN-ELEV-CASE Wall mounted casework 0 0.35 2 4 

IN-ELEV-FIXT Plumbing fixtures 0 0.25 3 2 

IN-ELEV-FNSH Finishes, woodwork and trim 0 0.35 2 4 

IN-ELEV-IDEN Component identification numbers 0 0.25 1 3 

IN-ELEV-PATT Textures and hatch patterns 0 0.18 5 1 

IN-ELEV-SIGN Signage 0 0.25 1 3 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













IN-DETL-GRPH Graphics, gridlines, non-text items V V V V 

IN-DETL-INPD Inch-pound specific dimensions and notes 0 V V V 

IN-DETL-METR Metric specific dimensions and notes 0 V V V 



January 2010 

4.13 Fire Protection 

TABLE I-4-58 Discipline: Fire Protection 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



FP-ANNO-DIMS Witness/extension lines, dimensions, arrowheads and text 0 0 7 0 

FP-ANNO-KEYN Keynotes with associated leader lines and arrowheads 0 0 7 0 

FP-ANNO-NPLT Construction lines, reference targets, area calculators 0 1 5 1 

FP-ANNO-PATT Miscellaneous patterning 0 0 8 9 

FP-ANNO-NOTE General notes and general remarks 0 2 2 4 

FP-ANNO-SYMB Reference bubbles V 2 6 5 

FP-ANNO-TEXT Detail title text, text, leader lines, arrowheads, notes 0 1 7 0 

FP-ANNO-MATCH Match lines 0 5 1 3 

FP-ANNO-BRK Break lines 0 0 2 4 

FP-STAT-DEMO Demolition 2 2 6 5 

FP-STAT-EXST Existing to remain 0 1 3 2 

FP-STAT-MOVE Items to be removed 5 2 6 5 

FP-STAT-NICN Not in contract 3 0 8 9 

FP-STAT-PHS# Phase numbers (# =1-9) 0 2 2 4 

FP-STAT-RELO Relocated items 2 0 5 1 

FP-STAT-TEMP Temporary work 4 3 4 7 

FP-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Life Safety Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



FP-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

FP-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

FP-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

FP-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

FP-ANNO-PATT Patterning, poche, shading, and hatching 0 0.18 8 9 

FP-ANNO-RDME Read-me information 0 0.18 5 1 

FP-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

FP-ANNO-SYMB Miscellaneous symbols V V 6 5 

FP-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Control Panels 

FP-CTRL-PANL Control panels 0 0.50 23 46 


FP-FLOR-IDEN 

FP-FLOR-NUMB 

Room name, space identification text (copied from Architectural 

- Floor Plan model 

Room/space identification number and symbol (copied from 

Architectural – Floor Plan model file) 

0 0.25 3 2 

0 0.25 3 2 

Means of Egress Lighting 

FP-LITE-EMER Emergency fixtures 0 0.50 23 46 

FP-LITE-EXIT Exit fixtures 0 0.50 203 45 

Egress Requirements 

FP-LSFT-EGRE Egress requirements designator 0 0.35 6 5 

FP-LSFT-OCCP Occupant load for egress capacity 0 0.35 6 5 

FP-LSFT-TRVL Maximum travel distances 0 0.35 6 5 

Fire Protection/Suppression/Alarm/Detection Equipment 

FP-PROT-ALRM-MANL Manual fire alarm pull stations 0 0.50 23 46 

FP-PROT-EXTN Fire extinguishers 0 0.35 2 4 

FP-PROT-EXTN-CABN Fire extinguisher cabinets 0 0.35 2 4 

FP-PROT-HOSE Fire hoses 0 0.35 2 4 

FP-PROT-HOSE-CABN Fire hose cabinets 0 0.35 2 4 



January 2010 


Model File Type: Life Safety Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


Fire Ratings 

FP-RATE-DOOR Door fire ratings 0 0.50 4 7 

FP-RATE-WALL Wall fire ratings 0 0.50 4 7 

Smoke/Pressurization Control 

FP-SMOK-DMPR Dampers 0 0.35 22 22 



January 2010 


Model File Type: Fire Suppression Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Aqueous Film Forming Foam System 

FP-AFFFP-EQPM Equipment 0 0.35 82 18 

FP-AFFFP-PIPE Piping 0 0.35 82 18 

CO2 Sprinkler System 

FP-CO2S-EQPM Equipment 0 0.35 6 5 

FP-CO2S-PIPE CO2 piping or CO2 discharge nozzle piping 0 0.35 6 5 


FP-FLOR-IDEN 

FP-FLOR-NUMB 

Halon System 





0 0.25 3 2 

0 0.25 3 2 

FP-HALN-EQPM Equipment 0 0.35 22 22 

FP-HALN-PIPE Piping 0 0.35 22 22 

Inert Gas 

FP-IGAS-EQPM Equipment 0 0.35 162 33 

FP-IGAS-PIPE Piping 0 0.35 162 33 

Sprinkler System 

FP-SPRN-CLHD Sprinkler - ceiling heads 0 0.35 122 23 

FP-SPRN-OTHD Sprinkler - other heads 0 0.35 122 23 



January 2010 


Model File Type: Fire Suppression Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


FP-SPRN-PIPE Sprinkler piping SPRINK 0.50 4 7 

FP-SPRN-STAN Standpipe system 0 0.35 122 23 

Water Supply and Distribution 

FP-WATR-CONN Fire department connections 0 0.35 122 23 

FP-WATR-HYDR Hydrants 0 0.35 122 23 

FP-WATR-PIPE Piping FIRE 0.50 4 7 

FP-WATR-PUMP Fire pumps 0 0.35 122 23 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













FP-DETL-GRPH Graphics, gridlines, non-text items V V V V 

FP-DETL-INPD Inch-pound specific dimensions and notes 0 V V V 

FP-DETL-METR Metric specific dimensions and notes 0 V V V 



January 2010 


Model File Type: Riser Diagrams 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



FP-ANNO-DIMS Witness/extension lines, dimensions, arrowheads and text 0 0 7 0 

FP-ANNO-KEYN Keynotes with associated leader lines and arrowheads 0 0 7 0 

FP-ANNO-NPLT Construction lines, reference targets, area calculators 0 1 5 1 

FP-ANNO-PATT Miscellaneous patterning 0 0 8 9 

FP-ANNO-NOTE General notes and general remarks 0 2 2 4 

FP-ANNO-SYMB Reference bubbles V 2 6 5 

FP-ANNO-TEXT Detail title text, text, leader lines, arrowheads, notes 0 1 7 0 

FP-ANNO-MATCH Match lines 0 5 1 3 

FP-ANNO-BRK Break lines 0 0 2 4 

FP-ALRM-DUCT Smoke detectors, heat sensors 0 1 3 2 

FP-LINFA-LW18 Extra fine line work V 0 5 1 

FP-LINFA-LW25 Fine line work V 1 1 3 

FP-LINFA-LW35 Medium line work V 2 2 4 

FP-LINFA-LW50 Wide line work V 3 4 7 

FP-LINFA-LW70 Extra wide line work V 4 7 0 

FP-STAT-DEMO Demolition 2 2 6 5 

FP-STAT-EXST Existing to remain 0 1 3 2 

FP-STAT-FUTR Future work 7 2 2 4 

FP-STAT-MOVE Items to be removed 5 2 6 5 

FP-STAT-NICN Not in contract 3 0 8 9 

FP-STAT-PHS# Phase numbers (# =1-9) 0 2 2 4 

FP-STAT-RELO Relocated items 2 0 5 1 

FP-STAT-TEMP Temporary work 4 3 4 7 

FP-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 

4.14 Fire Alarm System 

TABLE I-4-63 Discipline: Fire Alarm System 

Model File Type: Demolition 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



FA-ANNO-DIMS Witness/extension lines, dimensions, arrowheads and text 0 0 7 0 

FA-ANNO-KEYN Keynotes with associated leader lines and arrowheads 0 0 7 0 

FA-ANNO-NPLT Construction lines, reference targets, area calculators 0 1 5 1 

FA-ANNO-PATT Miscellaneous patterning 0 0 8 9 

FA-ANNO-NOTE General notes and general remarks 0 2 2 4 

FA-ANNO-SYMB Reference bubbles V 2 6 5 

FA-ANNO-TEXT Detail title text, text, leader lines, arrowheads, notes 0 1 7 0 

FA-ANNO-MATCH Match lines 0 5 1 3 

FA-ANNO-BRK Break lines 0 0 2 4 

FA-STAT-DEMO Demolition 2 2 6 5 

FA-STAT-EXST Existing to remain 0 1 3 2 

FA-STAT-MOVE Items to be removed 5 2 6 5 

FA-STAT-NICN Not in contract 3 0 8 9 

FA-STAT-PHS# Phase numbers (# =1-9) 0 2 2 4 

FA-STAT-RELO Relocated items 2 0 5 1 

FA-STAT-TEMP Temporary work 4 3 4 7 

FA-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 

TABLE I-4-64 Discipline: Fire Alarm 

Model File Type: Fire Alarm/Detection Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



FA-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

FA-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

FA-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

FA-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

FA-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

FA-ANNO-RDME Read-me information 0 0.18 5 1 

FA-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

FA-ANNO-SYMB Miscellaneous symbols V V 6 5 

FA-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Control Panels 

FA-CTRL-PANL Control panels 0 0.50 23 46 


FA-FLOR-IDEN 

FA-FLOR-NUMB 




Architectural - Floor 

Plan model file) 

0 0.25 3 2 

0 0.25 3 2 

Fire Protection/Suppression/Alarm/Detection Equipment 

FA-PROT-ALRM-INDC Indicating appliances 0 0.50 83 42 

FA-PROT-ALRM-MANL Manual fire alarm pull stations 0 0.50 23 46 

F-PROT-SMOK Smoke detectors and heat sensors 0 0.50 23 46 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 




FA-ANNO-NPLT Construction lines, reference targets, area calculators V 0 5 1 






FA-DETL-GENF General features (miscellaneous items) 0 V V V 

FA-DETL-ARCH Architectural features 0 2 2 4 

FA-DETL-BUSS Bus bars and rods 0 1 3 2 

FA-DETL-CABS Cabinets and enclosures 0 2 6 5 

FA-DETL-INSL Insulation and coverings 0 1 3 2 

FA-DETL-LTFX Light fixtures 0 2 2 4 

FA-DETL-MOTR Motors 0 1 1 3 

FA-DETL-PIPE Piping and conduit 0 2 2 4 

FA-DETL-STRC Structural support features 0 1 1 3 

FA-DETL-TRAY Cable trays 0 2 6 5 

FA-DETL-WIRE Wire and cables 0 2 2 4 

FA-DETL-XFRM Transformer 0 2 2 4 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 




FA-ANNO-KEYN Keynotes with associated leader lines and arrowheads 0 0 7 0 

FA-ANNO-NPLT Construction lines, reference targets, area calculators 0 1 5 1 


FA-ANNO-NOTE General notes and general remarks 0 2 2 4 





FA-ALRM-DUCT Smoke detectors, heat sensors 0 1 3 2 

FA-LINFA-LW18 Extra fine line work V 0 5 1 

FA-LINFA-LW25 Fine line work V 1 1 3 

FA-LINFA-LW35 Medium line work V 2 2 4 

FA-LINFA-LW50 Wide line work V 3 4 7 

FA-LINFA-LW70 Extra wide line work V 4 7 0 

FA-STAT-DEMO Demolition 2 2 6 5 

FA-STAT-EXST Existing to remain 0 1 3 2 

FA-STAT-FUTR Future work 7 2 2 4 

FA-STAT-MOVE Items to be removed 5 2 6 5 

FA-STAT-NICN Not in contract 3 0 8 9 

FA-STAT-PHS# Phase numbers (# =1-9) 0 2 2 4 

FA-STAT-RELO Relocated items 2 0 5 1 

FA-STAT-TEMP Temporary work 4 3 4 7 

FA-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 

4.15 Plumbing 

TABLE I-4-67 Discipline: Plumbing 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



PL-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PL-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PL-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PL-ANNO-PATT Miscellaneous patterning 0 0 8 9 

PL-ANNO-NOTE General note and general remarks 0 2 2 4 

PL-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PL-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

PL-STAT-DEMO Demolition 2 2 6 5 

PL-STAT-EXST Existing to remain 0 1 3 2 

PL-STAT-MOVE Items to be moved 5 2 6 5 

PL-STAT-NICN Not in contract 3 0 8 9 

PL-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

PL-STAT-RELO Relocated items 2 0 5 1 

PL-STAT-TEMP Temporary work 4 3 4 7 

PL-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Piping Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



PL-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

PL-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

PL-ANNO-NOTE General notes and general remarks 0 0.35 4 4 

PL-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

PL-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

PL-ANNO-RDME Read-me information 0 0.18 5 1 

PL-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

PL-ANNO-SYMB Miscellaneous symbols V V 6 5 

PL-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Domestic Water System 

PL-DOMW-CPIP Cold water piping CLDWTR 0.50 123 31 

PL-DOMW-EQPM Hot and cold water equipment 0 0.70 7 0 

PL-DOMW-EQPM- 

ACCS 

Equipment access doors 

0 0.35 82 18 

PL-DOMW-FPIP Domestic filtered water piping 0 0.50 83 42 

PL-DOMW-HPIP 

Hot water piping 

HWTR, 

HWTRR 0.50 113 16 

PL-DOMW-RISR Hot and cold water risers 2 0.25 3 2 


PL-FLOR-IDEN 

PL-FLOR-NUMB 


- Floor Plan model) 

Room/ 

space identification number and symbol (copied from 


0 0.25 3 2 

0 0.25 3 2 

Laboratory Gas Piping 

PL-LGAS-EQPM Equipment 0 0.70 24 38 

OXYGEN 

NITROG 

PL-LGAS-PIPE 

Piping 

HELIUM 

0.50 23 46 

HYDRGN 

ACIDWS 



January 2010 


Model File Type: Piping Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


Medical/Dental Gas Piping 

PL-MDGS-EQPM Equipment 0 0.70 24 38 

PL-MDGS-NITG Nitrogen piping NITROG 0.50 23 46 

PL-MDGS-NOXG Nitrous oxide piping NITOXI 0.50 23 46 

PL-MDGS-OXYG Pure O2 piping OXYGEN 0.50 23 46 

PL-MDGS-SAIR Scavenge air 0 0.50 23 46 

PL-MDGS-VACU Medical vacuum piping VACAIR 0.50 23 46 

Penetrations 

PL-PENE-FLOR Floor penetrations 2 0.25 3 2 

PL-PENE-ROOF Roof penetrations 2 0.25 1 3 

PL-PENE-WALL Wall penetrations 2 0.25 2 4 

Sanitary Drainage System 

PL-SANR-COND Condensate piping 0 0.50 83 42 

PL-SANR-EQPM Equipment (e.g., sand/oil/water separators) 0 0.70 201 37 

PL-SANR-FLDR Floor drains, sinks, and cleanouts 0 0.35 6 5 

PL-SANR-PIPE Piping SSWAF 0.50 203 45 

PL-SANR-RISR Sanitary risers 2 0.50 203 45 

PL-SANR-VENT Vent piping VENT 0.50 203 45 

Storm Drainage System 

PL-STRM-PIPE Storm drain piping STRAF 0.50 163 41 

PL-STRM-RFDR 

Roof drains 

0, 

ROOFDN 

0.50 163 41 

PL-STRM-RISR Storm drain risers 2 0.50 163 41 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













PL-DETL-GRPH Graphics, gridlines, non-text items V V V V 

PL-DETL-INPD Inch-pound specific dimensions and notes 0 V V V 

PL-DETL-METR Metric specific dimensions and notes 0 V V V 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












Diagram Information 

PL-DIAG-GRPH Graphics, gridlines, non-text items V V V V 

PL-DIAG-INPD Inch-pound specific dimensions and notes 0 V V V 

PL-DIAG-METR Metric specific dimensions and notes 0 V V V 



January 2010 

4.16 Mechanical 

TABLE I-4-71 Discipline: Mechanical 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

ME-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

ME-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

ME-ANNO-PATT Miscellaneous patterning 0 0 8 9 

ME-ANNO-NOTE General note and general remarks 0 2 2 4 

ME-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

ME-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

ME-STAT-DEMO Demolition 2 2 6 5 

ME-STAT-EXST Existing to remain 0 1 3 2 

ME-STAT-MOVE Items to be moved 5 2 6 5 

ME-STAT-NICN Not in contract 3 0 8 9 

ME-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

ME-STAT-RELO Relocated items 2 0 5 1 

ME-STAT-TEMP Temporary work 4 3 4 7 

ME-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: HVAC Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 

ME-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

ME-ANNO-MASK Text/shape mask for use with photo backgrounds 0 0.18 113 16 

ME-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

ME-ANNO-NPLT 

Non-plotting graphic information (e.g., clearances and working 

space information) 

0 0.18 5 1 

ME-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

ME-ANNO-RDME Read-me information 0 0.18 5 1 

ME-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

ME-ANNO-SYMB Miscellaneous symbols V V 6 5 

ME-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Chemical Treatment System 

ME-CHEM-EQPM Chemical treatment system equipment 0 0.35 123 31 

ME-CHEM-RETN-PIPE Chemical treatment system return piping 0 0.50 123 31 

ME-CHEM-SUPP-PIPE Chemical treatment system supply piping 0 0.50 123 31 

Condenser Water System 

ME-CNDW-EQPM Condenser water system equipment 0 0.35 83 42 

ME-CNDW-RETN-PIPE Condenser water system return piping 

ME-CNDW-SUPP-PIPE Condenser water system supply piping 

Controls 

CONDW 

R 

CONDW 

S 

0.50 83 42 

0.50 83 42 

ME-CONT-THER Thermostats 0 0.25 1 3 

ME-CONT-WIRE Low voltage wiring 1,2 0.25 1 3 

Chilled Water System 

ME-CWTR-CNDS-PIPE Condensate piping CDRNAF 0.50 83 42 

ME-CWTR-EQPM Chilled water equipment 0 0.35 163 41 

ME-CWTR-RETN-PIPE Chilled water return piping CWR 0.50 163 41 

ME-CWTR-SUPP-PIPE Chilled water supply piping CWS 0.50 163 41 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


Dual Temperature System 

ME-DUAL-EQPM Dual temperature system equipment 0 0.35 23 46 

ME-DUAL-RETN-PIPE Dual temperature system return piping DTR 0.50 23 46 

ME-DUAL-SUPP-PIPE Dual temperature system supply piping DTS 0.50 23 46 

Dust and Fume Collection System 

ME-DUST-DUCT Dust and fume ductwork 0 0.50 203 45 

ME-DUST-DUCT- 

CNTR 

Dust and fume ductwork centerlines 7 0.18 5 1 

ME-DUST-EQPM Dust and fume equipment 0 0.35 203 45 

ME-DUST-GRIL Dust and fume grilles 0 0.35 203 45 

Exhaust Air System 

ME-EXHS-DUCT Exhaust ductwork V 0.50 83 42 X X V 0.50 83 42 

ME-EXHS-DUCT- 

CNTR 

Exhaust ductwork centerlines 7 0.18 5 1 X X 7 0.18 5 1 

ME-EXHS-EQPM Exhaust equipment 0 0.35 83 42 X X 0 0.35 83 42 

ME-EXHS-GRIL Grilles 0 0.35 83 42 0 0.35 83 42 


ME-FLOR-IDEN 

ME-FLOR-NUMB 

Glycol System 




Architectural - Floor Plan model file) 

0 0.25 3 2 

0 0.25 3 2 

ME-GLYC-EQPM Glycol system equipment 0 0.35 82 18 

ME-GLYC-RETN-PIPE Glycol system return piping GHR 0.50 82 18 

ME-GLYC-SUPP-PIPE Glycol system supply piping GHS 0.50 82 18 

Geothermal Heat Pump System 

ME-GTHP-EQPM Geothermal heat pump system equipment 0 0.35 203 45 

ME-GTHP-RETN-PIPE Geothermal heat pump system return piping 0 0.50 203 45 

ME-GTHP-SUPP-PIPE Geothermal heat pump system supply piping 0 0.50 203 45 

High Temperature/Chilled Water System 

ME-HTCW-ABND-PIPE Abandoned piping 2 0.25 1 3 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ME-HTCW-CWTR- 

MAIN 

ME-HTCW-CWTR- 

PLNT 

ME-HTCW-CWTR- 

SERV 

Main chilled water piping 0 0.35 163 41 

Chilled water plant 0 0.35 163 41 

Chilled water service piping 0 0.25 163 41 

ME-HTCW-DEVC 

Rigid anchors, anchor guides, rectifiers, reducers, markers, 

meters, pumps,regulators, tanks, and valves 

0 0.35 6 5 

ME-HTCW-FLOW Flow direction arrows 0 0.25 3 2 

ME-HTCW-FTTG Caps and flanges 0 0.35 6 5 

ME-HTCW-HWTR- 

MAIN 

ME-HTCW-HWTR- 

PLNT 

ME-HTCW-HWTR- 

SERV 

Main high temperature piping 0 0.35 113 16 

High temperature water plant 0 0.35 113 16 

High temperature service piping 0 0.25 113 16 

ME-HTCW-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

ME-HTCW-JBOX Junction boxes, manholes, handholes, test boxes 0 0.25 1 3 

ME-HTCW-LWTR- 

MAIN 

ME-HTCW-LWTR- 

SERV 

Main low temperature piping 0 0.35 1 3 

Low temperature service piping 0 0.25 1 3 

ME-HTCW-PITS Valve pits/vaults, steam pits 0 0.25 3 2 

ME-HTCW-PLNT-IDEN Water plant identifier tags, symbol modifiers, and text 0 0.35 2 4 

ME-HTCW-RETN-PIPE Return for all HTCW lines 0 0.18 5 1 

ME-HTCW-STEM- 

MAIN 

ME-HTCW-STEM- 

SERV 

Main steam piping 0 0.35 113 16 

Steam service piping 0 0.25 113 16 

ME-HTCW-STNS-IDEN Pump station identifier tags, symbol modifiers, and text 0 0.35 6 5 

ME-HTCW-STNS- 

PUMP 


HVAC System 

ME-HVAC-ACCS Equipment access doors 0,1,2 0.25 3 2 

ME-HVAC-CDFF Ceiling diffusers, registers, and grilles 0 0.35 20 6 

ME-HVAC-DMPR Fire, smoke, volume dampers 0 0.25 1 3 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ME-HVAC-EQPM Equipment (non-powered) 0 0.35 2 4 

ME-HVAC-EQPM- 

EFAN 

Equipment with electric fans or motors 0 0.35 2 4 

ME-HVAC-EQPM-EPIP Equipment with piping and electricity 0 0.35 2 4 

ME-HVAC-EQPM- 

FLOR 

ME-HVAC-EQPM- 

SUSP 

Equipment - floor mounted 0 0.35 2 4 

Equipment - suspended 0 0.35 2 4 

ME-HVAC-FDFF Floor diffusers, registers, and grilles 0 0.35 162 33 

ME-HVAC-IDEN Duct sizes and pressure classes 0 0.35 6 5 

ME-HVAC-RDFF Return air diffusers 0 0.35 23 46 

ME-HVAC-RETN Return ductwork V 0.50 23 46 

ME-HVAC-RETN- 

CNTR 

Return ductwork centerlines 7 0.18 5 1 

ME-HVAC-ROOF Roof mounted HVAC equipment 0 0.35 2 4 

ME-HVAC-SUPP Supply ductwork V 0.50 4 7 

ME-HVAC-SUPP- 

CNTR 

ME-HVAC-SUPP- 

HDUC 

ME-HVAC-SUPP- 

LDUC 

Supply ductwork centerlines 7 0.18 5 1 

Supply ductwork - high pressure V 0.50 4 7 

Supply ductwork - low pressure V 0.50 4 7 

ME-HVAC-TAGS Diffuser/register/grille tags and air flow arrows 0 0.35 6 5 

ME-HVAC-WDFF Wall diffusers, registers, and grilles 0 0.35 2 4 

Hot Water Heating System 

ME-HWTR-EQPM Hot water heating system equipment 0 0.35 113 16 

ME-HWTR-RETN-PIPE Hot water heating system return piping HWR 0.50 113 16 

ME-HWTR-SUPP-PIPE Hot water heating system supply piping HWS 0.50 113 16 

Mixed Air System 

ME-MAIR-DUCT Mixed air ductwork 0 0.50 7 0 

ME-MAIR-DUCT-CNTR Mixed air ductwork centerlines 7 0.18 5 1 

ME-MAIR-EQPM Mixed air equipment 0 0.35 7 0 

Makeup Air System 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ME-MKUP-DUCT Makeup air ductwork 0 0.50 2 4 

ME-MKUP-DUCT- 

CNTR 

Makeup air ductwork centerlines 7 0.18 5 1 

ME-MKUP-EQPM Makeup air equipment 0 0.35 2 4 

ME-MKUP-GRIL Makeup air grilles 0 0.35 2 4 

Penetrations 

ME-PENE-FLOR Floor penetrations 2 0.25 3 2 

ME-PENE-ROOF Roof penetrations 2 0.25 1 3 

ME-PENE-WALL Wall penetrations 2 0.25 2 4 

Relief Air System 

ME-RAIR-DUCT Relief air ductwork 0 0.50 1 3 

ME-RAIR-DUCT-CNTR Relief air ductwork centerlines 7 0.18 5 1 

ME-RAIR-EQPM Relief air equipment 0 0.35 1 3 

ME-RAIR-GRIL Relief air grilles 0 0.35 1 3 

Energy Recovery System 

ME-RCOV-EQPM Energy recovery system equipment 0 0.35 203 45 

ME-RCOV-RETN-PIPE Energy recovery system return piping 0 0.50 203 45 

ME-RCOV-SUPP-PIPE Energy recovery system supply piping 0 0.50 203 45 

Refrigeration System 

ME-REFG-DISC-PIPE Refrigeration system REFRD 0.50 163 41 

ME-REFG-EQPM Refrigeration system equipment 0 0.35 163 41 

ME-REFG-RETN-PIPE Refrigeration system return piping REFRS 0.50 163 41 

ME-REFG-SUPP-PIPE Refrigeration system supply piping REFRL 0.50 163 41 

Steam System 

ME-STEME-BLBD- 

PIPE 

ME-STEME-CNDS- 

PIPE 

Boiler blow down piping BOILBD 0.50 113 16 

Condensate piping CDRNAF 0.50 83 42 

ME-STEME-EQPM Steam system equipment 0 0.35 113 16 

ME-STEME-HPIP-PIPE High pressure steam piping STEAMH 0.50 113 16 

ME-STEME-LPIP-PIPE Low pressure steam piping STEAML 0.50 1 3 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ME-STEME-MPIP-PIPE Medium pressure steam piping STEAMM 0.50 2 4 

Transfer Air System 

ME-TAIR-DUCT Transfer air ductwork 0 0.50 200 13 

ME-TAIR-DUCT-CNTR Transfer air ductwork centerlines 7 0.18 5 1 

ME-TAIR-EQPM Transfer air equipment 0 0.35 200 13 



January 2010 


Model File Type: Specialty Piping and Equipment Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 




ME-ANNO-NPLT 



0 0.18 5 1 






Industrial Waste Piping 

ME-ACID-EQPM Acid, alkaline, and oil waste equipment 0 0.35 80 11 

ME-ACID-PIPE 

Acid, alkaline, and oil waste piping 

ACIDWS, 

IWASTE 

0.50 80 11 

ME-ACID-VENT Acid, alkaline, and oil waste vent piping 2 0.50 80 11 

Anti-Freeze 

ME-AFRZ-EQPM Anti-freeze equipment 0 0.35 82 18 

ME-AFRZ-SUPP-PIPE Anti-freeze supply piping 0 0.50 82 18 

ME-AFRZ-WAST-PIPE Anti-freeze waste piping 0 0.50 82 18 

Brine System 

ME-BRIN-EQPM Brine system equipment 0 0.35 123 31 

ME-BRIN-RETN-PIPE Brine system return piping BRINER BRINER 0.50 123 31 

ME-BRIN-SUPP-PIPE Brine system supply piping BRINES BRINES 0.50 123 31 

Compressed Air 

ME-CMPA-EQPM Equipment 0 0.70 84 34 

ME-CMPA-PIPE Piping CMPAIR 0.50 83 42 




January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ME-FLOR-IDEN 

ME-FLOR-NUMB 

Fuel System 




Architectural - Floor Plan model file) 

0 0.25 3 2 

0 0.25 3 2 

ME-FUEL-EQPM Equipment 0 0.70 24 38 

ME-FUEL-GGEP- 

LQPG 

Liquid petroleum gas LIQPET 0.50 23 46 

ME-FUEL-OGEP-RETN Return oil piping FUELOR 0.50 23 46 

ME-FUEL-OGEP-SUPP Supply oil piping FUELOS 0.50 23 46 

ME-FUEL-OGEP-VENT Oil piping vent FUELOV 0.50 23 46 

Glycol System 

ME-GLYC-EQPM Glycol system equipment 0 0.35 82 18 

ME-GLYC-RETN-PIPE Glycol system return piping GHR 0.50 82 18 

ME-GLYC-SUPP-PIPE Glycol system supply piping GHS 0.50 82 18 

Hydraulic Control Systems (Hydraulic Fluid) 

ME-HCSF-EQPM Hydraulic system equipment 0 0.35 200 13 

ME-HCSF-RETN-PIPE Hydraulic system return piping 0 0.50 120 12 X 0 0.35 120 12 

ME-HCSF-SUPP-PIPE Hydraulic system supply piping 0 0.50 200 13 X 0 0.50 200 13 

Insulating (Transformer) Oil System 

ME-INSL-EQPM Insulating oil equipment 0 0.35 200 13 

ME-INSL-RETN-PIPE Insulating oil return piping 0 0.50 200 13 

ME-INSL-SUPP-PIPE Insulating oil supply piping 0 0.50 200 13 

Lubrication Oil 

ME-LUBE-EQPM ME-LUBEEQME- Lubrication oil equipment 0 0.35 200 13 X X 0 0.35 200 13 

ME-LUBE-RETN-PIPE ME-LUBERPME- Lubrication oil return piping 0 0.50 200 13 X X 0 0.50 200 13 

ME-LUBE-SUPP-PIPE ME-LUBESPME- Lubrication oil supply piping 0 0.50 200 13 0 0.50 200 13 

Natural Gas System 

ME-NGAS-EQPM Natural gas equipment 0 0.35 6 5 

ME-NGAS-PIPE Natural gas piping NTGASN 0.35 6 5 

Penetrations 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ME-PENE-FLOR Floor penetrations 2 0.25 3 2 

ME-PENE-ROOF Roof penetrations 2 0.25 1 3 

ME-PENE-WALL Wall penetrations 2 0.25 2 4 

Process Piping 

ME-PROC-EQPM Process equipment 0 0.35 120 12 

ME-PROC-RETN-PIPE Process return piping 0 0.50 120 12 

ME-PROC-SUPP-PIPE Process supply piping 0 0.50 120 12 

Raw Water Piping 

ME-RWTR-EQPM Raw water equipment 0 0.35 123 31 

ME-RWTR-RETN-PIPE Raw water return piping 0 0.50 123 31 

ME-RWTR-SUPP-PIPE Raw water supply piping 0 0.50 123 31 



January 2010 


Model File Type: HTCW Utilities Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 




ME-ANNO-NPLT 



0 0.18 5 1 






Geothermal Heat Pump System 

ME-GTHP-EQPM Geothermal heat pump system equipment 0 0.35 203 45 

ME-GTHP-RETN-PIPE Geothermal heat pump system return piping 0 0.50 203 45 

ME-GTHP-SUPP-PIPE Geothermal heat pump system supply piping 0 0.50 203 45 

High Temperature/Chilled Water System 

ME-HTCW-ABND-PIPE Abandoned piping 2 0.25 1 3 

ME-HTCW-CWTR-MAIN Main chilled water piping 0 0.35 163 41 

ME-HTCW-CWTR- 

PLNT 

ME-HTCW-CWTR- 

SERV 

Chilled water plant 0 0.35 163 41 

Chilled water service piping 0 0.25 163 41 

ME-HTCW-DEVC 

Rigid anchors, anchor guides, rectifiers, reducers, markers, 

meters, pumps,regulators, tanks, and valves 

0 0.35 6 5 

ME-HTCW-FLOW Flow direction arrows 0 0.25 3 2 

ME-HTCW-FTTG Caps and flanges 0 0.35 6 5 

ME-HTCW-HWTR-MAIN Main high temperature piping 0 0.35 113 16 

ME-HTCW-HWTR- 

PLNT 

ME-HTCW-HWTR- 

SERV 

High temperature water plant 0 0.35 113 16 

High temperature service piping 0 0.25 113 16 



January 2010 


Model File Type: HTCW Utilities Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ME-HTCW-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

ME-HTCW-JBOX Junction boxes, manholes, handholes, test boxes 0 0.25 1 3 

ME-HTCW-LWTR-MAIN Main low temperature piping 0 0.35 1 3 

ME-HTCW-LWTR- 

SERV 

Low temperature service piping 0 0.25 1 3 

ME-HTCW-PITS Valve pits/vaults, steam pits 0 0.25 3 2 

ME-HTCW-PLNT-IDEN Water plant identifier tags, symbol modifiers, and text 0 0.35 2 4 

ME-HTCW-RETN-PIPE Return for all HTCW lines 0 0.18 5 1 

ME-HTCW-STEM-MAIN Main steam piping 0 0.35 113 16 

ME-HTCW-STEM-SERV Steam service piping 0 0.25 113 16 

ME-HTCW-STNS-IDEN Pump station identifier tags, symbol modifiers, and text 0 0.35 6 5 

ME-HTCW-STNS- 

PUMP 




January 2010 


Model File Type: Material Handling 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 




ME-ANNO-NPLT 



0 0.18 5 1 






Material Handling Equipment 

ME-MATL-CRAN Cranes 0 0.35 2 4 

ME-MATL-CRAN- 

BOOM 

Crane, boom 0 0.35 2 4 

ME-MATL-HOIS Hoists 0 0.35 2 4 

ME-MATL-HOOK Hooks, eyes, and other end attachments 0 0.35 2 4 

ME-MATL-LIFT Miscellaneous lifting equipment 0 0.35 6 5 

ME-MATL-WIRE Wire rope, chains, and other hoisting medium 0 0.35 6 5 



January 2010 


Model File Type: Machine Design 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 




ME-ANNO-NPLT 



0 0.18 5 1 






Machine Design 

ME-MACH-AXLE Shafts and axles 0 0.35 2 4 

ME-MACH-BASE Machinery bases 0 0.35 2 4 

ME-MACH-BEAR Bearings and couplings 0 0.35 2 4 

ME-MACH-BELT Wire rope, chains, and belts 0 0.35 22 22 

ME-MACH-BSHG Bushings, wear plates, shims, and spacers 0 0.35 2 4 

ME-MACH-CLEV Clevises 0 0.35 22 22 

ME-MACH-COMP Miscellaneous machinery parts and components 0 0.35 2 4 

ME-MACH-COVR Machinery covers, cover plates, and guarding 0 0.35 4 7 

ME-MACH-FSTN Fasteners, nuts, and bolts 0 0.35 2 4 

ME-MACH-GEAR Gears 0 0.35 6 5 

ME-MACH-KEYS Keys and keeper plates 0 0.35 22 22 

ME-MACH-LROT Large rotating machinery (turbine and pump outlines) 0 0.35 6 5 

ME-MACH-MOTR Machinery motors 0 0.35 6 5 

ME-MACH-PINS Pins 0 0.35 22 22 

ME-MACH-PULL Pulleys, drums, and sheaves 0 0.35 22 22 

ME-MACH-RAIL Rails (e.g., crane rails, rail hoots, splice plates, etc.) 0 0.35 22 22 

ME-MACH-ROLL Rollers and wheels 0 0.35 22 22 



January 2010 


Model File Type: Machine Design 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ME-MACH-ROLL- 

TRAK 

Roller tracks 0 0.35 22 22 

ME-MACH-SEAL Seals 0 0.35 22 22 

ME-MACH-SHOE Sliding shoes, skids, etc. 0 0.35 22 22 

ME-MACH-SPPT Support brackets 0 0.35 2 4 

ME-MACH-SPRG Springs 0 0.35 22 22 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 




ME-ANNO-NPLT 



0 0.18 5 1 






Elevations 

ME-ELEV-FIXT Miscellaneous fixtures 0 0.35 6 5 

ME-ELEV-IDEN Component identification numbers 0 0.35 2 4 

ME-ELEV-OTLN Building outlines 0 0.35 6 5 

ME-ELEV-PATT Textures and hatch patterns 0 0.18 8 9 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 




ME-ANNO-NPLT 



0 0.18 5 1 






Sections 

ME-SECT-IDEN Component identification numbers 0 0.35 2 4 

ME-SECT-MBND Material beyond section cut 0 0.18 5 1 

ME-SECT-MCUT Material cut by section 0 0.50 4 7 

ME-SECT-PATT Textures and hatch patterns 0 0.18 8 9 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 




ME-ANNO-NPLT 



0 0.18 5 1 






Detail information 

ME-DETL-GRPH Graphics, gridlines, non-text items V V V V 

ME-DETL-INPD Inch-pound specific dimensions and notes 0 V V V 

ME-DETL-METR Metric specific dimensions and notes 0 V V V 



January 2010 


Model File Type: Control Diagrams 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 


weld symbols 

0 V V V 




ME-ANNO-NPLT 



0 0.18 5 1 







ME-DIAG-GRPH Graphics, gridlines, non-text items V V V V 

ME-DIAG-INPD Inch-pound specific dimensions and notes 0 0.25 1 3 

ME-DIAG-METR Metric specific dimensions and notes 0 0.25 3 2 



January 2010 

4.17 Electrical 

TABLE I-4-81 Discipline: Electrical 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



EL-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

EL-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

EL-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

EL-ANNO-PATT Miscellaneous patterning 0 0 8 9 

EL-ANNO-NOTE General note and general remarks 0 2 2 4 

EL-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

EL-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

EL-STAT-DEMO Demolition 2 2 6 5 

EL-STAT-EXST Existing to remain 0 1 3 2 

EL-STAT-MOVE Items to be moved 5 2 6 5 

EL-STAT-NICN Not in contract 3 0 8 9 

EL-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

EL-STAT-RELO Relocated items 2 0 5 1 

EL-STAT-TEMP Temporary work 4 3 4 7 

EL-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Lighting Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



EL-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

EL-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

EL-ANNO-MASK Text/shape mask for use with photo backgrounds 0 0.18 113 16 

EL-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

EL-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

EL-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

EL-ANNO-RDME Read-me information 0 0.18 5 1 

EL-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

EL-ANNO-SYMB Miscellaneous symbols V V 6 5 

EL-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 


EL-FLOR-IDEN 

EL-FLOR-NUMB 

Lighting 





0 0.25 3 2 

0 0.25 3 2 

EL-LITEL-CIRC Lighting circuits (including crosslines and homeruns) 0 0.50 83 42 

EL-LITEL-CIRC-NUMB 

Lighting circuit numbers (e.g., panel/circuit number, wire/conduit 

size) 

0 0.35 2 4 

EL-LITEL-CLNG Ceiling mounted (surface/pendant) fixtures 0 0.50 203 45 

EL-LITEL-EMER 

EL-LITEL-EXIT 

Emergency fixtures (outline of light (if ceiling mounted) should 

go on EL-LITEL-CLNG 

Exit fixtures (outline of light (if ceiling mounted) should go on 

EL-LITEL-CLNG) 

0 0.50 23 46 

0 0.50 203 45 

EL-LITEL-FLOR Floor mounted fixtures (e.g., stage) 0 0.50 203 45 

EL-LITEL-IDEN Light fixture identifier tags 0 0.35 2 4 

EL-LITEL-JBOX Junction boxes 0 0.50 83 42 

EL-LITEL-PANL Main distribution panels, switchboards, lighting panels 0 0.50 4 7 

EL-LITEL-ROOF Roof lighting 0 0.50 203 45 

EL-LITEL-SPCL Special fixtures 0 0.50 203 45 

EL-LITEL-SWCH 

Lighting contactors, photoelectric controls, low-voltage lighting 

controls, etc. 

0 0.50 163 41 



January 2010 


Model File Type: Lighting Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


EL-LITEL-WALL Wall mounted fixtures 0 0.50 203 45 

Other Discipline Information 

EL-DISC-INFO Clearances and working space information (NEC code, etc.) 0 0.25 3 2 



January 2010 


Model File Type: Power Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Cable System 

EL-CABL-TRAY 

EL-CABLTRM- Cable trays and wireways 

0, 

WIREWY 

0.50 203 45 


EL-FLOR-IDEN 


Power 





0 0.25 3 2 

0 0.25 3 2 

EL-POWR-BUSW 

Busways 

0, 

BUSWAY 

0.50 203 45 

EL-POWR-CIRC Power circuits (including crosslines and homeruns) V 0.50 83 42 

EL-POWR-CIRC- 

NUMB 

Power circuit numbers (e.g., panel/circuit number, wire/conduit 

size) 

0 0.35 2 4 

EL-POWR-CLNG Ceiling outlets (receptacles and switches) 0 0.50 83 42 

EL-POWR-FEED Feeders 0 0.50 203 45 

EL-POWR-GENR Generators and auxiliary equipment 0 0.50 4 7 

EL-POWR-JBOX 

Junction boxes, pull boxes, manholes, handholes, pedestals, 

splices 

0 0.50 83 42 

EL-POWR-MOTR Motors and utilization equipment 0 0.50 4 7 



January 2010 


Model File Type: Power Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


EL-POWR-PANL 

EL-POWR-SWCH 

Panelboards, switchboards, MCC, unit substations, backing 

boards, patch panel 

Fuse cutouts, motor starters, contactors, pole mounted 

switches, circuit breakers, 

gang operated disconnects, reclosers, cubicle switches 

0 0.50 4 7 

0 0.50 163 41 

EL-POWR-URAC Underfloor raceways 3 0.50 203 45 

EL-POWR-WALL Wall/floor outlets (receptacles and switches) 0 0.50 83 42 





January 2010 


Model File Type: Special Systems Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Alarm System 

EL-ALRM-EQPM Alarm system equipment 0 0.50 203 45 

EL-ALRM-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Bell System 

EL-BELL-EQPM Bell system equipment 0 0.50 203 45 

EL-BELL-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Cable System 

EL-CABL-COAX Coax cable 2 0.50 83 42 

EL-CABL-FIBR Fiber optics cable FIBOPT 0.50 83 42 

EL-CABL-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

EL-CABL-MULT Multi-conductor cable V 0.50 83 42 

EL-CABL-TRAY 

EL-CABLTRM- Cable trays and wireways 

0, 

WIREWY 

0.50 203 45 

Cable TV System 

EL-CATV-EQPM 

Cable TV system equipment 

0, 

CABLTV 

0.50 203 45 

EL-CATV-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Closed-Circuit Television System 

EL-CCTV-EQPM Closed-circuit television system equipment 0 0.50 203 45 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


EL-CCTV-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Clock System 

EL-CLOK-EQPM Clock system equipment 0 0.50 203 45 

EL-CLOK-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Central Dictation System 

EL-DICT-EQPM Central dictation system equipment 0 0.50 203 45 

EL-DICT-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Energy Monitoring Control Systems 

EL-EMCS-EQPM Energy monitoring control system equipment 0 0.50 203 45 

EL-EMCS-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 


EL-FLOR-IDEN 


Intercom System 





0 0.25 3 2 

0 0.25 3 2 

E-INTC-EQPM Intercom system equipment 0 0.50 203 45 

E-INTC-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Nurse Call/ Paging System 

EL-NURS-EQPM Nurse call/paging system equipment 0 0.50 203 45 

EL-NURS-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

Power 

EL-POWR-JBOX 

EL-POWR-PANL 

Security System 


splices 

Panelboards, switchboards, MCC, unit substations, backing 

boards, patch panel 

0 0.50 83 42 

0 0.50 4 7 

EL-SERT-ACCS Access control system 0 0.50 23 46 

EL-SERT-CLNG Ceiling mounted sensors 0 0.50 23 46 

EL-SERT-FLOR Floor mounted sensors 0 0.50 23 46 

EL-SERT-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


EL-SERT-UNDR Buried sensors 0 0.50 23 46 

EL-SERT-WALL Wall mounted sensors 0 0.50 23 46 

Sound/PA System 

EL-SOUN-EQPM Sound/PA system equipment 0 0.50 203 45 

EL-SOUN-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

TV Antenna System 

EL-TVAN-EQPM Television antenna system equipment 0 0.50 203 45 

EL-TVAN-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 





January 2010 


Model File Type: Grounding System Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Ground System 

EL-GRND-CIRC Circuits 0 0.50 4 7 

EL-GRND-DIAG Ground system diagram 0 0.50 163 41 

EL-GRND-EQUI Equipotential ground system 0 0.50 83 42 

EL-GRND-REFR Reference ground system 0 0.50 23 46 

Lighting Protection System 

EL-LTNG-COND Lightning protection conductors 0 0.50 203 45 0 0.50 203 45 

EL-LTNG-TERM Lightning protection terminals 0 0.35 2 4 



January 2010 


Model File Type: Electrical Utilities Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Cathodic Protection System 

EL-CATH-ANOD Sacrificial anode system 0 0.05 83 42 

EL-CATH-CURR Impress current system 0 0.50 83 42 

EL-CATH-IDEN Identifier tags, symbol modifier, and text 0 0.35 83 42 

EL-CATH-TEST Test stations 0 0.50 83 42 

Underground Ductbanks (to be used when multiple systems are in one ductbank system) 

EL-DUCT-MULT Ductbank EUDUCN 0.50 83 42 

EL-DUCT-MULT-IDEN Identifier tags, symbol modifier and text 0 0.35 83 42 

Lighting 

EL-LITE-EXTR Exterior lights 0 0.50 203 45 

EL-LITE-EXTR-IDEN Exterior light identifier tags, symbol modifiers, and text 0 0.35 203 45 

Power 

EL-POWR-DEVC 

EL-POWR-JBOX 

Capacitors, voltage regulators, motors, buses, generators, 

meters, grounds 


splices 

0 0.50 23 46 

0 0.50 83 42 

EL-POWR-POLE Power poles 0 0.50 203 45 

EL-POWR-POLE- 

GUYS 

Guying equipment 0 0.50 203 45 

EL-POWR-POLE-IDEN Identifier tags, symbol modifiers, and text 0 0.35 203 45 



January 2010 


Model File Type: Electrical Utilities Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


EL-POWR-SUBS Other substation equipment 0 0.50 23 46 

EL-POWR-SWCH 

Fuse cutouts, motor starters, contactors, pole mounted 

switches, circuit breakers, gang operated disconnects, 

reclosers, cubicle switches 

0 0.50 163 41 

EL-POWR-XFMR- 

PADM 

EL-POWR-XFMR- 

POLM 

Pad mounted transformers 0 0.50 23 46 

Pole mounted transformers 0 0.50 23 46 

Primary Electrical Cables 

EL-PRIM-OVHD Overhead electrical utility lines EPARN 0.50 4 7 

EV-PRIM-OVHD-IDEN Identifier tags, symbol modifiers, and text 0 0.35 4 7 

EV-PRIM-UNDR Underground electrical utility lines EPUGN 0.50 4 7 

EL-PRIM-UNDR-IDEN Identifier tags, symbol modifiers, and text 0 0.35 4 7 

Secondary Electrical Cables 

EL-SECD-OVHD Overhead electrical utility lines ESARN 0.50 163 41 

EL-SECD-OVHD-IDEN Identifier tags, symbol modifiers, and text 0 0.35 163 41 

EL-SECD-UNDR Underground electrical utility lines ESUGN 0.50 163 41 

EL-SECD-UNDR-IDEN Identifier tags, symbol modifiers, and text 0 0.35 163 41 

Special Systems 

EL-SPCL-SYST Special systems (UMCS, EMCS, CATV, etc.) 0 0.50 203 45 

EL-SPCL-SYST-IDEN 

Special systems (UMCS, EMCS, CATV, etc.) identifier tags, 

symbol modifier, and text 

0 0.35 203 45 

EL-SPCL-TRAF Traffic signal system 0 0.50 203 45 

EL-SPCL-TRAF-IDEN Traffic signal identifier tags, symbol modifier, and text 0 0.35 203 45 





January 2010 


Model File Type: Exterior Communication Systems Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 














EL-COMM-EQPM Other communications distribution equipment 0 0.50 23 46 

EL-COMM-JBOX 

Communication junction boxes, pull boxes, manholes, 

handholes, pedestals, and s 

0 0.50 23 46 

EL-COMM-OVHD Overhead communications/telephone lines COMARN 0.50 4 7 

EL-COMM-OVHD-IDEN Identifier tags, symbol modifier and text 0 0.35 4 7 

EL-COMM-POLE Poles 0 0.50 203 45 

EL-COMM-POLE- 

GUYS 

Guying equipment 0 0.50 203 45 

EL-COMM-POLE-IDEN Identifier tags, symbol modifiers, and text 0 0.35 203 45 

EL-COMM-UNDR 

Underground communications/telephone lines 

COMUG 

N 

0.50 4 7 

EL-COMM-UNDR-IDEN Identifier tags, symbol modifier and text 0 0.35 4 7 

Underground Ductbanks (to be used when multiple systems are in one ductbank system) 

EL-DUCT-MULT Ductbank EUDUCN 0.50 83 42 

EL-DUCT-MULT-IDEN Identifier tags, symbol modifier and text 0 0.35 83 42 





January 2010 


Model File Type: Airfield Lighting Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













Airfields 

EL-AFLD-BCNS-IDEN Identifier tags, symbol modifiers, and text 0 0.35 203 45 

EL-AFLD-BCNS-MISC Miscellaneous navaids - windcones and beacons 0 0.50 203 45 

EL-AFLD-BCNS-STRB Strobe beacons 0 0.50 203 45 

EL-AFLD-CIRC-CTRL Control and monitoring circuits 0 0.50 163 41 

EL-AFLD-CIRC-IDEN Circuit identifier tags, symbol modifier, and text 0 0.35 2 4 

EL-AFLD-CIRC-MULT Multiple circuits 0 0.50 23 46 

EL-AFLD-CIRC-SERS Series circuits 0 0.50 203 45 

EL-AFLD-DEVC 

Capacitors, voltage regulators, motors, buses, generators, 

meters, grounds 

0 0.50 23 46 

EL-AFLD-DUCT Ductbanks EUDUCN 0 0.50 83 42 

EL-AFLD-JBOX 


splices 

0 0.50 23 46 

EL-AFLD-LITE-APPR Approach lights 0 0.50 203 45 

EL-AFLD-LITE-DIST Distance and arresting gear markers 0 0.50 203 45 

EL-AFLD-LITE-LANE Hoverlane, taxilane, and helipad lights 0 0.50 203 45 

EL-AFLD-LITE-OBST Obstruction lights 0 0.50 203 45 

EL-AFLD-LITE-RUNW Runway lights 0 0.50 203 45 

EL-AFLD-LITE-SIGN Taxiway guidance signs 0 0.50 203 45 

EL-AFLD-LITE-TAXI Taxiway lights 0 0.50 203 45 



January 2010 


Model File Type: Airfield Lighting Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


EL-AFLD-LITE-THRS Threshold lights 0 0.50 203 45 

EL-AFLD-VALT Airfield lighting vaults 0 0.50 203 45 





January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 
















EL-DETL-GRPH Graphics, gridlines, non-text items V V V V 

EL-DETL-INPD Inch-pound specific dimensions and notes 0 0.35 2 4 

EL-DETL-METR Metric specific dimensions and notes 0 0.35 2 4 



January 2010 


Model File Type: Riser/One-Line Diagrams 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 
















EL-DIAG-GRPH Graphics, gridlines, non-text items V V V V 

EL-DIAG-IDEN Metric specific dimensions and notes 0 0.35 2 4 

EL-DIAG-INPD Inch-pound specific dimensions and notes 0 0.35 2 4 

EL-DIAG-METR Metric specific dimensions and notes 0 0.35 2 4 



January 2010 

4.18 Communications 

TABLE I-4-91 Discipline: Communications 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CO-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

CO-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

CO-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

CO-ANNO-PATT Miscellaneous patterning 0 0 8 9 

CO-ANNO-NOTE General note and general remarks 0 2 2 4 

CO-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

CO-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

CO-STAT-DEMO Demolition 2 2 6 5 

CO-STAT-EXST Existing to remain 0 1 3 2 

CO-STAT-MOVE Items to be moved 5 2 6 5 

CO-STAT-NICN Not in contract 3 0 8 9 

CO-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

CO-STAT-RELO Relocated items 2 0 5 1 

CO-STAT-TEMP Temporary work 4 3 4 7 

CO-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Telephone/Data Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CO-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V V V 

CO-ANNO-KEYN Reference keynotes with associated leaders 0 V V V 

CO-ANNO-NOTE General notes and general remarks 0 0.35 2 4 

CO-ANNO-NPLT Non-plotting graphic information 0 0.18 5 1 

CO-ANNO-PATT Patterning, poche, shading, and hatching V 0.18 8 9 

CO-ANNO-RDME Read-me information 0 0.18 5 1 

CO-ANNO-REFR Reference files (AutoCAD users only) NA NA NA NA 

CO-ANNO-SYMB Miscellaneous symbols V V 6 5 

CO-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V V V 

Cable System 

CO-CABL-COAX Coax cable 2 0.50 83 42 

CO-CABL-FIBR Fiber optics cable FIBOPT 0.50 83 42 

CO-CABL-IDEN Cable identifiers 0 0.35 2 4 

CO-CABL-MULT Multi-conductor cable 0 0.50 83 42 

CO-CABL-TRAY Cable trays and wireways 0 0.50 203 45 

Equipment 

CO-EQPM-COMB Distribution equipment for both copper and fiber optics 0 0.50 4 7 

CO-EQPM-COPP Distribution equipment for copper 0 0.50 4 7 

CO-EQPM-FIBR Distribution equipment for fiber optic 0 0.50 4 7 

CO-EQPM-OTHR Other telecommunications equipment 0 0.50 4 7 

CO-EQPM-RELA Relays, resistors, capacitors, and inducers 0 0.50 4 7 


CO-FLOR-IDEN 

CO-FLOR-NUMB 

Jacks 


- Floor Plan model file 



0 0.25 3 2 

0 0.25 3 2 

CO-JACK-COMB Combination telephone and data/LAN jacks 0 0.50 203 45 

CO-JACK-DATA Data/LAN jacks 0 0.50 203 45 

CO-JACK-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 



January 2010 


Model File Type: Telephone/Data Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


CO-JACK-PHON Telephone jacks 0 0.50 203 45 

Junction Boxes 

CO-COMM-JBOX Junction boxes 0 0.50 83 42 


CO-DISC-INFO Information and notes for other disciplines V V V V 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













CO-DISC-INFO Information and notes for other disciplines V V V V 


CO-DIAG-GRPH Graphics, gridlines, non-text items V V V V 

CO-DIAG-IDEN Identifier tags, symbol modifiers, and text 0 0.35 2 4 

CO-DIAG-INPD Inch-pound specific dimensions and notes 0 0.35 2 4 

CO-DIAG-METR Metric specific dimensions and notes 0 0.35 2 4 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 













CO-DETL-GRPH Graphics, gridlines, non-text items V V V V 

CO-DETL-INPD Inch-pound specific dimensions and notes V V V V 

CO-DETL-METR Metric specific dimensions and notes V V V V 



January 2010 

4.19 Baggage Handling System 

TABLE I-4-95 Discipline: Baggage Handling System 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



BG-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

BG-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

BG-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

BG-ANNO-PATT Miscellaneous patterning 0 0 8 9 

BG-ANNO-NOTE General note and general remarks 0 2 2 4 

BG-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

BG-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

BG-STAT-DEMO Demolition 2 2 6 5 

BG-STAT-EXST Existing to remain 0 1 3 2 

BG-STAT-MOVE Items to be moved 5 2 6 5 

BG-STAT-NICN Not in contract 3 0 8 9 

BG-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

BG-STAT-RELO Relocated items 2 0 5 1 

BG-STAT-TEMP Temporary work 4 3 4 7 

BG-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 

TABLE I-4-96 Discipline: Baggage Handling 

Model File Type: Baggage Handling Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



BG-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text 0 V 1 3 

BG-ANNO-KEYN Reference keynotes with associated leaders 0 V 4 7 

BG-ANNO-NPLT Non-plotting information 0 0.18 V V 

BG-ANNO-PATT Miscellaneous patterning and hatching 0 0.18 10 10 

BG-ANNO-NOTE General note and general remarks 0 0.35 4 7 

BG-ANNO-SYMB Miscellaneous symbols 0 0.35 4 7 

BG-ANNO-LEAD Leaders 0 0.25 4 7 

BG-ANNO-TEXT Miscellaneous text and callouts with associated leaders 0 V 4 7 

BG-ANNO-REFR Reference files N/A N/A N/A N/A 

Conveyor 

BG-CLMU-XXX-EXST Existing claim devices to remain 0 V V V 

BG-CLMU-XXX-PHS# New claim devices installed in phase # 0 V V V 

BG-CONV-XXX-EXST1 

Existing conveyor subsystem XXX to remain on baggage claim 

level 0 V V V 

BG-CONV-XXX-EXST2 Existing conveyor subsystem XXX to remain on concourse level 0 V V V 

BG-CONV-XXX-EXST3 

Existing conveyor subsystem XXX to remain on ticketing/ checkin 

level 0 V V V 

BG-CONV-XXX-PHS# New conveyor subsystem XXX installed in phase # 0 V V V 

BG-MKUP-XXX-EXST Existing make-up devices to remain 0 V V V 

BG-MKUP-XXX-PHS# New make-up devices installed in phase # 0 V V V 

BG-CONV-EQUIP- 

ATR-PHS# Automatic Tag readers 1 V V V 


BMA-PHS# Baggage Measurement Arrays 2 V V V 


VDT-PHS# Vertical diverter 2 V V V 

BG-CONV-FLOW Baggage Flow arrows 3 V V V 

BG-CONV-BAG 

CLEAR Three foot clear above conveyor belt 4 V V V 

BG-CONV-INFO-XXX Clearances, working spaces and top of belts*(TOB) 5 V V V 

Controls and Motor Control Panels 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


BG-CTRL-XXX-EXST1 



Existing controls on subsystem XXX to remain on the baggage 

claim level 0 0.25 2 4 

Existing controls on subsystem XXX to remain on the concourse 

level 0 0.25 2 4 

Existing controls on subsystem XXX to remain on the 

ticketing/check-in level 0 0.25 2 4 

BG-CTRL-XXX-PHS# New controls installed on subsystem XXX in phase # 0 0.25 1 3 

BG-MCPL-XXX-EXST Existing Motor Control Panels on subsystem XXX to remain 0 V V V 

BG-MCPL-XXX-PHS# 

New Motor Control Panels on subsystem XXX installed in phase 

# 0 V V V 

TSA Entities 

BG-TEDS-XXX-EXST 

BG-TEDS-XXX-PHS# 

BG-TETD-XXX-EXST 

BG-TETD-XXX-PHS# 

Existing TSA Explosive Detection Device (EDS) along 

subsystem XXX to remain 0 V V V 

New TSA Explosive Detection Device (EDS) along subsystem 

XXX installed in phase # 0 V V V 

Existing Explosive Trace Device (ETD) along subsystem XXX to 

remain 0 V V V 

New Explosive Trace Device (ETD) along subsystem XXX 

installed in phase # 0 V V V 

BG-TOSR-EXST Existing On Screen Resolution (OSR) to remain 0 V V V 

BG-TOSR-PHS# New On Screen Resolution (OSR) installed in phase # 0 V V V 

Fire System 

BG-SFDR-XXX-EXST 

BG-SFDR-XXX-PHS# 

Existing security/fire door (SFD) along subsystem XXX to 

remain 0 V 2 4 

New security/fire door (SFD) along subsystem XXX installed in 

phase # 0 V 1 3 

Relocation 

BG-CLMU-XXX-MOVE Claim device XX relocation 0 V V V 

BG-CONV-XXX-MOVE Conveyor from existing subsystem relocated within facility 0 V V V 

BG-TEDS-XXX-MOVE EDS from existing subsystem XXX relocated within facility 0 V V V 

BG-TETD-XXX-MOVE ETD from existing subsystem XXX relocated within facility 0 V V V 

BG-MCPL-XXX-MOVE MCP from existing subsystem XXX relocated within facility 0 V V V 

BG-MKUP-XXX-MOVE Existing MKUP XX relocated within facility 0 V V V 

BG-TOSR-MOVE Existing OSR equipment relocated within facility 0 V V V 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


BG-SFDR-XXX-MOVE Existing security/fire door relocated within facility 0 V V V 

Demolition 

BG-CTWK-DEMO- 

PHS# Demolition of existing catwalk - phase # V V 5 1 

BG-CLMU-XXX-DEMO- 

PHS# Demolition of existing claim device XX - phase # V V V V 

BG-CONV-XXX-DEMO- 

PHS# Demolition of existing conveyor XXX - phase # V V V V 

BG-TEDS-XXX-DEMO- 

PHS# Demolition of existing EDS along subsystem XXX - phase # V V V V 

BG-TETD-XXX-DEMO- 

PHS# Demolition of existing ETD along subsystem XXX - phase # V V V V 

BG-MCPL-XXX-DEMO- 

PHS# Demolition of existing MCP for subsystem XXX - phase # V V V V 

BG-MKUP-XXX-DEMO- 

PHS# Demolition of existing make up device XX - phase # V V V V 

BG-SFDR-XXX-DEMO- 

PHS# 

Demolition of existing security/fire door along subsystem XXX - 

phase # V V 5 1 

Temporary Work 

BG-CTWK-TEMP- 

PHS# Temporary catwalk to be installed in phase # V V 5 1 

BG-CONV-XXX-TEMP- 

PHS# Temporary conveyor XXX to be installed in phase # V V V V 

BG-TEDS-XXX-TEMP- 

PHS# 

Temporary EDS along subsystem XXX to be installed in phase 

# V V V V 

BG-TETD-XXX-TEMP- 

PHS# Temporary ETD along subsystem XXX to be installed in phase # V V 5 1 

BG-MKUP-XXX-TEMP- 

PHS# Temporary make-up XX to be installed in phase # V V V V 

Staging 

BG-CART-EXIST Existing cart staging arrangement 0 0.25 2 4 

BG-CART-PHS# New cart staging arrangement in phase # 0 0.25 1 3 

Access 

BG-CTWK-EXST Existing catwalk to remain 0 0.35 2 4 

BG-CTWK-PHS# New catwalk installed in phase # 0 0.35 1 3 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


BG-CTWK-DEMO Catwalk demolition 0 V V V 


BG-DISC-INFO Clearances, working spaces and top of bed heights (TOB) 0 0.35 4 7 



January 2010 

4.20 Security & Access Control System 

TABLE I-4-97 Discipline: Security & Access Control System 

Model File Type: Demolition 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



SS-ANNO-DIMS Witness/extension lines, dimensions, arrowheads and text 0 0 7 0 

SS-ANNO-KEYN Keynotes with associated leader lines and arrowheads 0 0 7 0 

SS-ANNO-NPLT Construction lines, reference targets, area calculators 0 1 5 1 

SS-ANNO-PATT Miscellaneous patterning 0 0 8 9 

SS-ANNO-NOTE General notes and general remarks 0 2 2 4 

SS-ANNO-SYMB Reference bubbles V 2 6 5 

SS-ANNO-TEXT Detail title text, text, leader lines, arrowheads, notes 0 1 7 0 

SS-ANNO-MATCH Match lines 0 5 1 3 

SS-ANNO-BRK Break lines 0 0 2 4 

SS-STAT-DEMO Demolition 2 2 6 5 

SS-STAT-EXST Existing to remain 0 1 3 2 

SS-STAT-MOVE Items to be removed 5 2 6 5 

SS-STAT-NICN Not in contract 3 0 8 9 

SS-STAT-PHS# Phase numbers (# =1-9) 0 2 2 4 

SS-STAT-RELO Relocated items 2 0 5 1 

SS-STAT-TEMP Temporary work 4 3 4 7 

SS-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Security Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












SS-ACCS-EXTR Exterior mounted access control devices 0 1 3 2 

SS-ACCS-PANL Access control unit / panel 0 1 3 2 

SS-ACCS-WALL Wall mounted (interior) access control device 0 1 3 2 

SS-ANCN-PANL Annunciation equipment control unit / panel 0 1 3 2 

SS-ANCN-RESN Annunciation remote station 0 1 3 2 

SS-BARR-FENC Fences / gates 0 2 6 5 

SS-BARR-SENS Sensors 0 1 3 2 

SS-BARR-WALL Walls 0 2 6 5 

SS-COMM-CLNG Ceiling mounted communication equipment 0 1 3 2 

SS-COMM-INTC Intercom / speakers 0 1 3 2 

SS-COMM-PANL Communication panel 0 1 3 2 

SS-COMM-WALL Wall mounted communication equipment 0 1 3 2 

SS-SWCH-FLSH Flush mounted switches / contacts 0 1 3 2 

SS-SWCH-SURF Surface mounted switches / contacts 0 1 3 2 

SS-SENS-BURD Buried sensor 2 1 3 2 

SS-SENS-CLNG Ceiling mounted sensor 0 1 3 2 

SS-SENS-FLOR Floor mounted sensor 0 1 3 2 

SS-SENS-GLAS Glass / foil mounted sensor 0 1 3 2 

SS-SENS-PANL Sensor control unit 0 1 3 2 

SS-SENS-WALL Wall mounted sensor 0 1 3 2 

SS-CCTV-CLNG Ceiling mounted CCTV 0 1 3 2 



January 2010 


Model File Type: Security Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


SS-CCTV-WALL Wall mounted CCTV 0 1 3 2 

SS-LITSC-CLNG Ceiling mounted security lighting 0 1 3 2 

SS-LITSC-POLE Pole mounted security lighting 0 1 3 2 

SS-LITSC-WALL Wall mounted security lighting 0 1 3 2 

SS-LOCK-ELEC Electric device 0 1 3 2 

SS-LOCK-MANL Manual device 0 1 3 2 

SS-WIRSC-SYST Security wiring / circuits 0 0 5 1 



SS-STAT-FUTR Future work 7 2 2 4 








January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 












SS-CNTL-ANTA Antenna V 1 3 2 

SS-CNTL-AVLV Arrestor valves V 1 3 2 

SS-CNTL-BATR Batteries V 1 3 2 

SS-CNTL-CAPT Capacitor V 1 3 2 

SS-CNTL-CKTB Circuit boards V 1 3 2 

SS-CNTL-CONT Contacts V 1 3 2 

SS-CNTL-FUSE Fuses V 1 3 2 

SS-CNTL-GENR Generators V 1 3 2 

SS-CNTL-GRND Grounds V 1 3 2 

SS-CNTL-METR Metering devices V 1 3 2 

SS-CNTL-MOTR Motors V 1 3 2 

SS-CNTL-OVLD Overloads V 1 3 2 

SS-CNTL-RACT Reactors V 1 3 2 

SS-CNTL-RELA Relays V 1 3 2 

SS-CNTL-RSTR Resistors V 1 3 2 

SS-CNTL-SWCH Switches V 1 3 2 

SS-CNTL-XFMR Transformers V 1 3 2 

SS-ALRM-DUCT Smoke detectors, heat sensors 0 1 3 2 

SS-LINSC-LW18 Extra fine line work V 0 5 1 

SS-LINSC-LW25 Fine line work V 1 1 3 

SS-LINSC-LW35 Medium line work V 2 2 4 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


SS-LINSC-LW50 Wide line work V 3 4 7 

SS-LINSC-LW70 Extra wide line work V 4 7 0 



SS-STAT-FUTR Future work 7 2 2 4 






SS-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 




SS-ANNO-NPLT Construction lines, reference targets, area calculators V 0 5 1 






SS-DETL-GENF General features (miscellaneous items) 0 V V V 

SS-DETL-ARCH Architectural features 0 2 2 4 

SS-DETL-BUSS Bus bars and rods 0 1 3 2 

SS-DETL-CABS Cabinets and enclosures 0 2 6 5 

SS-DETL-INSL Insulation and coverings 0 1 3 2 

SS-DETL-LTFX Light fixtures 0 2 2 4 

SS-DETL-MOTR Motors 0 1 1 3 

SS-DETL-PIPE Piping and conduit 0 2 2 4 

SS-DETL-STRC Structural support features 0 1 1 3 

SS-DETL-TRAY Cable trays 0 2 6 5 

SS-DETL-WIRE Wire and cables 0 2 2 4 

SS-DETL-XFRM Transformer 0 2 2 4 



January 2010 

4.21 Public Information System 

TABLE I-4-101 Discipline: Public Information System 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



PS-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PS-ANNO-PATT Miscellaneous patterning 0 0 8 9 

PS-ANNO-NOTE General note and general remarks 0 2 2 4 

PS-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

PS-STAT-DEMO Demolition 2 2 6 5 

PS-STAT-EXST Existing to remain 0 1 3 2 

PS-STAT-MOVE Items to be moved 5 2 6 5 

PS-STAT-NICN Not in contract 3 0 8 9 

PS-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

PS-STAT-RELO Relocated items 2 0 5 1 

PS-STAT-TEMP Temporary work 4 3 4 7 

PS-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Public Information Systems Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



PS-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PS-ANNO-PATT Miscellaneous patterning 0 0 8 9 

PS-ANNO-NOTE General note and general remarks 0 2 2 4 

PS-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

Audio Paging 

PS-AUDI-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-AUDI-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-AUDI-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PS-AUDI-PATT Miscellaneous patterning 0 0 8 9 

PS-AUDI-NOTE General note and general remarks 0 2 2 4 

PS-AUDI-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-AUDI-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

Visual Paging 

PS-VISU-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-VISU-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-VISU-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PS-VISU-PATT Miscellaneous patterning 0 0 8 9 

PS-VISU-NOTE General note and general remarks 0 2 2 4 

PS-VISU-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-VISU-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

Multi-User Flight Information Systems (MUFIDS) 

PS-MUFIDS-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-MUFIDS-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-MUFIDS-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PS-MUFIDS-PATT Miscellaneous patterning 0 0 8 9 

PS-MUFIDS-NOTE General note and general remarks 0 2 2 4 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


PS-MUFIDS-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-MUFIDS-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

Baggage Information Systems (BIDS) 

PS-BIDS-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-BIDS-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-BIDS-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PS-BIDS-PATT Miscellaneous patterning 0 0 8 9 

PS-BIDS-NOTE General note and general remarks 0 2 2 4 

PS-BIDS-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-BIDS-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

Flight Information Systems (FIDS) 

PS-FIDS-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-FIDS-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-FIDS-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PS-FIDS-PATT Miscellaneous patterning 0 0 8 9 

PS-FIDS-NOTE General note and general remarks 0 2 2 4 

PS-FIDS-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-FIDS-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

Master Clock (MC) 

PS-MC-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-MC-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-MC-NPLT Construction lines, reference targets, area calculations V 0 5 1 

PS-MC-PATT Miscellaneous patterning 0 0 8 9 

PS-MC-NOTE General note and general remarks 0 2 2 4 

PS-MC-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-MC-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

Cable TV (CATV) 

PS-CATV-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

PS-CATV-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

PS-CATV-NPLT Construction lines, reference targets, area calculations V 0 5 1 



January 2010 



Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


PS-CATV-PATT Miscellaneous patterning 0 0 8 9 

PS-CATV-NOTE General note and general remarks 0 2 2 4 

PS-CATV-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

PS-CATV-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

PS-STAT-DEMO Demolition 2 2 6 5 

PS-STAT-EXST Existing to remain 0 1 3 2 

PS-STAT-MOVE Items to be moved 5 2 6 5 

PS-STAT-NICN Not in contract 3 0 8 9 

PS-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

PS-STAT-RELO Relocated items 2 0 5 1 

PS-STAT-TEMP Temporary work 4 3 4 7 

PS-STAT-HAZW Hazardous waste 0 2 6 5 



January 2010 

4.22 Aviation Information System 

TABLE I-4-103 Discipline: Aviation Information System 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



AS-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

AS-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

AS-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

AS-ANNO-PATT Miscellaneous patterning 0 0 8 9 

AS-ANNO-NOTE General note and general remarks 0 2 2 4 

AS-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

AS-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

AS-STAT-DEMO Demolition 2 2 6 5 

AS-STAT-EXST Existing to remain 0 1 3 2 

AS-STAT-MOVE Items to be moved 5 2 6 5 

AS-STAT-NICN Not in contract 3 0 8 9 

AS-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

AS-STAT-RELO Relocated items 2 0 5 1 

AS-STAT-TEMP Temporary work 4 3 4 7 

AS-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Aviation Information Systems Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



AS-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

AS-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

AS-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

AS-ANNO-PATT Miscellaneous patterning 0 0 8 9 

AS-ANNO-NOTE General note and general remarks 0 2 2 4 

AS-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

AS-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

iMUSE 

AS-MUSE-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

AS-MUSE-KEYN Keynote with associated leaders 0 V V V 

AS-MUSE-NPLT Construction lines, reference targets, area calculations V 0 5 1 

AS-MUSE-PATT Miscellaneous Patterning 0 0 8 9 

AS-MUSE-NOTE General note and remarks 0 2 2 4 

AS-MUSE-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

AS-MUSE-TEXT Detail Title text, leaderlines, arrowheads, notes 0 V V V 

Common Use Self Service (CUSS) Kiosks 

AS-CUSS-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

AS-CUSS-KEYN Keynote with associated leaders 0 V V V 

AS-CUSS-NPLT Construction lines, reference targets, area calculations V 0 5 1 

AS-CUSS-PATT Miscellaneous Patterning 0 0 8 9 

AS-CUSS-NOTE General note and remarks 0 2 2 4 

AS-CUSS-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

AS-CUSS-TEXT Detail Title text, leaderlines, arrowheads, notes 0 V V V 

AS-STAT-DEMO Demolition 2 2 6 5 

AS-STAT-EXST Existing to remain 0 1 3 2 

AS-STAT-MOVE Items to be moved 5 2 6 5 

AS-STAT-NICN Not in contract 3 0 8 9 

AS-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

AS-STAT-RELO Relocated items 2 0 5 1 



January 2010 


Model File Type: Aviation Information Systems Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


AS-STAT-TEMP Temporary work 4 3 4 7 

AS-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 

4.23 Electronic Monitoring System 

TABLE I-4-105 Discipline: Electronic Monitoring System 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ES-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

ES-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

ES-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

ES-ANNO-PATT Miscellaneous patterning 0 0 8 9 

ES-ANNO-NOTE General note and general remarks 0 2 2 4 

ES-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

ES-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

ES-STAT-DEMO Demolition 2 2 6 5 

ES-STAT-EXST Existing to remain 0 1 3 2 

ES-STAT-MOVE Items to be moved 5 2 6 5 

ES-STAT-NICN Not in contract 3 0 8 9 

ES-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

ES-STAT-RELO Relocated items 2 0 5 1 

ES-STAT-TEMP Temporary work 4 3 4 7 

ES-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 


Model File Type: Electronic Monitoring Systems Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ES-ANNO-DIMS Witness extension lines, dimensions arrowheads and text 0 V V V 

ES-ANNO-KEYN Keynote with associated leaderlines and arrowheads 0 V V V 

ES-ANNO-NPLT Construction lines, reference targets, area calculations V 0 5 1 

ES-ANNO-PATT Miscellaneous patterning 0 0 8 9 

ES-ANNO-NOTE General note and general remarks 0 2 2 4 

ES-ANNO-SYMB Reference bubbles, matchlines, breaklines V 2 6 5 

ES-ANNO-TEXT Detail title text, leaderlines, arrowheads, notes 0 V V V 

Automated External Defibrillator (AED) 

ES-AED –DIMS Witness/extension lines, dimensions arrowheads and text 0 V V V 

ES-AED-KEYN Keynotes with associated leaders 0 V V V 

ES-AED-NPLT Construction lines, reference targets, area calculations V 0 5 1 

ES-AED-PATT Miscellaneous Patterning 0 0 8 9 

ES-AED-NOTE General notes and remarks 0 2 2 4 

ES-AED-SYMB Reference bubbles, matchlines, breaklines, equipment/devices V 2 6 5 

ES-AED-TEXT Detail Title text, leaderlines, arrowheads, notes 0 V V V 

Supervisory Control & Data Acquisition (SCADA) 

ES-SCADA-DIMS Witness/extension lines, dimensions arrowheads and text 0 V V V 

ES-SCADA-KEYN Keynotes with associated leaders 0 V V V 

ES-SCADA-NPLT Construction lines, reference targets, area calculations V 0 5 1 

ES-SCADA-PATT Miscellaneous Patterning 0 0 8 9 

ES-SCADA-NOTE General notes and remarks 0 2 2 4 

ES-SCADA-SYMB Reference bubbles, matchlines, breaklines, equipment/devices V 2 6 5 

ES-SCADA-TEXT Detail Title text, leaderlines, arrowheads, notes 0 V V V 

Conveyance (elevators, escalators, and moving walks) 

ES-CONV Witness/extension lines, dimensions arrowheads and text 0 V V V 

ES-CONV-KEYN Keynotes with associated leaders 0 V V V 

ES-CONV-NPLT Construction lines, reference targets, area calculations V 0 5 1 

ES-CONV-PATT Miscellaneous Patterning 0 0 8 9 

ES-CONV-NOTE General notes and remarks 0 2 2 4 



January 2010 


Model File Type: Electronic Monitoring Systems Plan 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 


ES-CONV-SYMB Reference bubbles, matchlines, breaklines, equipment/devices V 2 6 5 

ES-CONV-TEXT Detail Title text, leaderlines, arrowheads, notes 0 V V V 

ES-STAT-DEMO Demolition 2 2 6 5 

ES-STAT-EXST Existing to remain 0 1 3 2 

ES-STAT-MOVE Items to be moved 5 2 6 5 

ES-STAT-NICN Not in contract 3 0 8 9 

ES-STAT-PHS# Phase numbers (# = 1-9) 0 2 2 4 

ES-STAT-RELO Relocated items 2 0 5 1 

ES-STAT-TEMP Temporary work 4 3 4 7 

ES-DEMO-HAZW Hazardous waste 0 2 6 5 



January 2010 

CHAPTER 5 Sheet File Level/Layer Assignment Tables 

This chapter provides the sheet file level/layer assignment tables: 

General 


Survey/Mapping 

Geotechnical 

Civil 

Landscape 

Structural Buildings 

Structural Civil 

Architectural 

Interiors 



Plumbing 

Mechanical 

Electrical 



Security & Access Control Systems 


Public Information Systems 

Aviation Information Systems 

Electronic Monitoring Systems 



January 2010 

5.1 General 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



GN-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

GN-ANNO-NPLT Legends and schedules 0 V V V 

GN-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

GN-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

GN-ANNO-SYMB 

GN-ANNO-TEXT 

Sheet-specific symbols (e.g., scales, north arrow, section cuts, 

detail bubbles, etc.) 

Sheet-specific text and callouts with associated leaders (e.g., 

title block text, legend and schedule text) 

V 0.35 6 5 

0 V V V 

GN-ANNO-REDL Redlines 0 0.25 1 3 

GN-ANNO-REVS Revisions 0 0.50 4 7 

GN-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.2 Hazardous Materials 

TABLE I-5-2 Discipline: Hazardous Material 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



HM-ANNO-DIMS 

Sheet-specific dimensions (includes withness/extension lines, 

dimension terminators, dimension text) 

0 V V V 

HM-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

HM-ANNO-NPLT Legends and schedules 0 V V V 

HM-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

HM-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

HM-ANNO-SYMB 

HM-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

HM-ANNO-REDL Redlines 0 0.25 1 3 

HM-ANNO-REVS Revisions 0 0.50 4 7 

HM-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.3 Survey/Mapping 

TABLE I-5-3 Discipline: Surveying/Mapping 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



SV-ANNO-DIMS 



0 V V V 

SV-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

SV-ANNO-NPLT Legends and schedules 0 V V V 

SV-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

SV-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

SV-ANNO-SYMB 

SV-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

SV-ANNO-REDL Redlines 0 0.25 1 3 

SV-ANNO-REVS Revisions 0 0.50 4 7 

SV-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.4 Geotechnical 

TABLE I-5-4 Discipline: Geotechnical 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



GT-ANNO-DIMS 



0 V V V 

GT-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

GT-ANNO-NPLT Legends and schedules 0 V V V 

GT-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

GT-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

GT-ANNO-SYMB 

GT-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

GT-ANNO-REDL Redlines 0 0.25 1 3 

GT-ANNO-REVS Revisions 0 0.50 4 7 

GT-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.5 Civil 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CV-ANNO-DIMS 



0 V V V 

CV-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

CV-ANNO-NPLT Legends and schedules 0 V V V 

CV-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

CV-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

CV-ANNO-SYMB 

CV-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

CV-ANNO-REDL Redlines 0 0.25 1 3 

CV-ANNO-REVS Revisions 0 0.50 4 7 

CV-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.6 Landscape 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



LA-ANNO-DIMS 



0 V V V 

LA-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

LA-ANNO-NPLT Legends and schedules 0 V V V 

LA-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

LA-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

LA-ANNO-SYMB 

LA-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

LA-ANNO-REDL Redlines 0 0.25 1 3 

LA-ANNO-REVS Revisions 0 0.50 4 7 

LA-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.7 Structural 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ST-ANNO-DIMS 



0 V V V 

ST-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

ST-ANNO-NPLT Legends and schedules 0 V V V 

ST-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

ST-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

ST-ANNO-SYMB 

ST-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

ST-ANNO-REDL Redlines 0 0.25 1 3 

ST-ANNO-REVS Revisions 0 0.50 4 7 




January 2010 

5.8 Structural Civil 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



SC-ANNO-DIMS 



0 V V V 

SC-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

SC-ANNO-NPLT Legends and schedules 0 V V V 

SC-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 G8 9 

SC-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

SC-ANNO-SYMB 

SC-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

SC-ANNO-REDL Redlines 0 0.25 1 3 

SC-ANNO-REVS Revisions 0 0.50 4 7 




January 2010 

5.9 Architectural 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



AR-ANNO-DIMS 



0 V V V 

AR-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

AR-ANNO-NPLT Legends and schedules 0 V V V 

AR-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

AR-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

AR-ANNO-SYMB 

AR-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

AR-ANNO-REDL Redlines 0 0.25 1 3 

AR-ANNO-REVS Revisions 0 0.50 4 7 

AR-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.10 Interiors 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



IN-ANNO-DIMS 



0 V V V 

IN-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

IN-ANNO-NPLT Legends and schedules 0 V V V 

IN-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

IN-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

IN-ANNO-SYMB 

IN-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

IN-ANNO-REDL Redlines 0 0.25 1 3 

IN-ANNO-REVS Revisions 0 0.50 4 7 

IN-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.11 Fire Protection 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



FP-ANNO-DIMS 



0 V V V 

FP-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

FP-ANNO-NPLT Legends and schedules 0 V V V 

FP-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

FP-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

FP-ANNO-SYMB 

FP-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

FP-ANNO-REDL Redlines 0 0.25 1 3 

FP-ANNO-REVS Revisions 0 0.50 4 7 

FP-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.12 Fire Alarm System 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



FA-ANNO-DIMS 



0 V V V 

FA-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

FA-ANNO-NPLT Legends and schedules 0 V V V 

FA-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

FA-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

FA-ANNO-SYMB 

FA-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

FA-ANNO-REDL Redlines 0 0.25 1 3 

FA-ANNO-REVS Revisions 0 0.50 4 7 

FA-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.13 Plumbing 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



PL-ANNO-DIMS 



0 V V V 

PL-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

PL-ANNO-NPLT Legends and schedules 0 V V V 

PL-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

PL-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

PL-ANNO-SYMB 

PL-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

PL-ANNO-REDL Redlines 0 0.25 1 3 

PL-ANNO-REVS Revisions 0 0.50 4 7 

PL-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.14 Mechanical 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ME-ANNO-DIMS 



0 V V V 

ME-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

ME-ANNO-NPLT Legends and schedules 0 V V V 

ME-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

ME-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

ME-ANNO-SYMB 

ME-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

ME-ANNO-REDL Redlines 0 0.25 1 3 

ME-ANNO-REVS Revisions 0 0.50 4 7 

ME-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.15 Electrical 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



EL-ANNO-DIMS 



0 V V V 

EL-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

EL-ANNO-NPLT Legends and schedules 0 V V V 

EL-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

EL-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

EL-ANNO-SYMB 

EL-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

EL-ANNO-REDL Redlines 0 0.25 1 3 

EL-ANNO-REVS Revisions 0 0.50 4 7 

EL-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.16 Communications 


Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



CO-ANNO-DIMS 



0 V V V 

CO-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

CO-ANNO-NPLT Legends and schedules 0 V V V 

CO-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

CO-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

CO-ANNO-SYMB 

CO-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

CO-ANNO-REDL Redlines 0 0.25 1 3 

CO-ANNO-REVS Revisions 0 0.50 4 7 

CO-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.17 Baggage Handling System 

TABLE I-5-17 Discipline: Baggage Handling System 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



BG-ANNO-DIMS 



0 V V V 

BG-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

BG-ANNO-NPLT Legends and schedules 0 V V V 

BG-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

BG-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

BG-ANNO-SYMB 

BG-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

BG-ANNO-REDL Redlines 0 0.25 1 3 

BG-ANNO-REVS Revisions 0 0.50 4 7 

BG-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.18 Security & Access Control Systems 

TABLE I-5-18 Discipline: Security & Access Control Systems 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



SS-ANNO-DIMS 



0 V V V 

SS-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

SS-ANNO-NPLT Legends and schedules 0 V V V 

SS-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

SS-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

SS-ANNO-SYMB 

SS-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

SS-ANNO-REDL Redlines 0 0.25 1 3 

SS-ANNO-REVS Revisions 0 0.50 4 7 

SS-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.19 Public Information Systems 

TABLE I-5-19 Discipline: Public Information Systems 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



PS-ANNO-DIMS 



0 V V V 

PS-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

PS-ANNO-NPLT Legends and schedules 0 V V V 

PS-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

PS-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

PS-ANNO-SYMB 

PS-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

PS-ANNO-REDL Redlines 0 0.25 1 3 

PS-ANNO-REVS Revisions 0 0.50 4 7 

PS-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.20 Aviation Information Systems 

TABLE I-5-20 Discipline: Aviation Information Systems 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



AS-ANNO-DIMS 



0 V V V 

AS-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

AS-ANNO-NPLT Legends and schedules 0 V V V 

AS-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

AS-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

AS-ANNO-SYMB 

AS-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

AS-ANNO-REDL Redlines 0 0.25 1 3 

AS-ANNO-REVS Revisions 0 0.50 4 7 

AS-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

5.21 Electronic Monitoring Systems 

TABLE I-5-21 Discipline: Electronic Monitoring Systems 

Level/Layer 

Naming 


Line Style 

Line Width 

AutoCAD Color 



ES-ANNO-DIMS 



0 V V V 

ES-ANNO-KEYN Sheet-specific reference keynotes with associated leaders 0 V V V 

ES-ANNO-NPLT Legends and schedules 0 V V V 

ES-ANNO-PATT Sheet-specific patterning and hatching (e.g., keyplan patterning) 0 0.18 8 9 

ES-ANNO-NOTE Sheet-specific notes and general remarks 0 0.35 2 4 

ES-ANNO-SYMB 

ES-ANNO-TEXT 





V 0.35 6 5 

0 V V V 

ES-ANNO-REDL Redlines 0 0.25 1 3 

ES-ANNO-REVS Revisions 0 0.50 4 7 

ES-ANNO-REFR Reference files (AutoCAD users only, refer to Chapter 4) NA NA NA NA 



January 2010 

CHAPTER 6 CADD Symbols 

CADD Symbols are a graphic representation of an object or 

of a material that represents something else. The objective 

of this chapter is to recommend a standardized resource to 

ensure consistent graphic representation in construction 

documents. All drawings shall be in accordance with 

Construction Specifications Institute (CSI), Uniform Drawing 

System – Module 6 Symbols. These symbols are listed by 

Master Format Division Number outlines below. 

Division 01 – General Requirements 

Division 02 – Existing Conditions 

Division 03 – Concrete 

Division 04 – Masonry 

Division 05 – Metals 

Division 06 – Wood, Plastics, and Composites 

Division 07 – Thermal and Moisture Protection 

Division 08 – Openings 

Division 09 – Finishes 

Division 10 – Specialties 

Division 11 – Equipment 

Division 12 – Furnishings 

Division 13 – Special Construction 

Division 21 – Fire Suppression (for Fire Protection, Fire 

Alarm refer to NFPA Codes and Standards) 

Division 22 – Plumbing 

Division 23 – Heating, Ventilating, and Air Conditioning 

Division 25 – Integrated Automation 

Division 26 – Electrical 

Division 27 – Communications 

Division 28 – Electronic Safety and Security 

Division 31 – Earthwork 

Division 32 – Exterior Improvements 

Division 33 – Utilities 

Division 40 – Progress Integration 

Division 44 – Pollution Control Equipment 



January 2010 




January 2010 

CHAPTER 7 References and Support Files 

7.1 Abbreviations 

8.5x11add.dgn 

FILE NAME 

8.5x11Ladd.dgn 

DESCRIPTION 

Addenda Sheet 

Addenda Sheet (Landscape) 

7.1.1 General: Abbreviations used shall conform to the 

United States National CAD Standard CSI Uniform Drawing 

System Module 5, “Terms and Abbreviations.” Unusual or 

uncommon abbreviations required on drawings, not 

specified by the National Standard, shall be clearly noted 

and defined on the G series of drawings. 

7.2 Basic Electronic Layout Files 

11x17add.dgn 

11x17Ladd.dgn 

7.2.2 Autodesk AutoCAD 

d2234bdr.dwg 

FILE NAME 

Addenda Sheet 


DESCRIPTION 

Titlesheet (Ronald Reagan 

Washington National Airport) 

22" x 34" DCA Border Sheet 

7.2.1 Bentley Microstation 

d3042bdr.dwg 




FILE NAME 

d2234bdr.dgn 

d3042bdr.dgn 

i2234bdr.dgn 

i3042bdr.dgn 

d2234cvr.dgn 

d3042cvr.dgn 

i2234cvr.dgn 

i3042cvr.dgn 

iprjgrid.dgn 

dprjgrid.dgn 

i2234dtl.dgn 

i3042dtl.dgn 

DESCRIPTION 







Titlesheet (Washington Dulles 

International Airport) 

22" x 34" IAD Border Sheet 




Coversheet (Ronald Reagan 


22" x 34" DCA Coversheet 


Washington National Airport 

30" x 42" DCA Coversheet) 

Coversheet (Washington Dulles 


22" x 34" IAD Coversheet 




Project grid (Washington Dulles 


Project grid (Ronald Reagan 


22" x 34" Area Map Sheet 

(Washington Dulles 





i2234bdr.dwg 

i3042bdr.dwg 

d22346cvr.dwg 

d3042cvr.dwg 

i2234cvr.dwg 

i3042cvr.dwg 

i2234dtl.dwg 

i3042dtl.dwg 

iprjgrid.dwg 

dprjgrid.dwg 

8.5x11add.dwg 

8.5x11Ladd.dwg 

11x17add.dwg 

11x17Ladd.dwg 























(Washington Dulles Internationa 

Airport) 

Project grid (Washington Dulles 

Internationa Airport) 

Project grid (Ronald Reagan 


Addenda Sheet 


Addenda Sheet 




January 2010 

7.3 References 

Building Construction 

Tri-Service CADD/GIS Technology Center, 1999. A/E/C 

Standard, release 1.8, U.S. Army Engineer Research and 

Development Center. 

American National Standards Institute (ANSI) Publications. 

Available from American National Standards Institute, 1430 

Broadway, New York, NY 10018. 

ANSI A2.4-86 Standard Symbols for Welding, 

Brazing and Nondestructive 

Examination 

ANSI D1.1-88 Structural Welding Code Steel 

ANSI Y1.1-72 Abbreviations for Use of Drawings 

and in Text 

ANSI Y14.1-80 Drawing Sheet Size and Format 

ANSI Y14.15-66 Electrical and Electronics 

Diagrams 

Y14.15a-71 Addenda 

Y14.15b-73 Interconnection Diagrams 

Selection 15-11, Information 

Sheet 

ANSI Y14.2M-79 Line Conventions and Lettering; 

Errata-1981 

ANSI Y32.2.4-49 Graphical Symbols for Heating, 

Ventilation, and Air Conditioning 

ANSI Y32.2.6-50 Graphic Symbols for Heat- 

Power Apparatus 

American Society of Civil Engineers. 1983. “Standards and 

Symbols, Chapter 5,” Map Uses, Scales, and Accuracies 

for Engineering and Associated Purposes. Available from 

American Society of Civil Engineers, 345 East 47th Street, 

New York, NY 10017. 

Compton, R. R. 1967. Manual of Field Geology, John Wiley 

and Sons, Ltd., New York, NY. Available from Wiley and 

Sons, Ltd., 605 3rd Avenue, New York, NY 10016. 

Ramsey, Charles George. 1988. Architectural Graphic 

Standards, 6th Ed., John Wiley and Sons, Ltd., New York, 

NY. Available from Wiley and Sons, Ltd., 605 3rd Avenue, 

New York, NY 10016. 

U.S. Army Corps of Engineers. 1966. “Inspection Manual 

for Subsurface Investigations,” North Pacific Division. 

Available from National Technical Information Service, 5285 

Port Royal Road, Springfield, VA 22161. 

U.S. Geological Survey. Undated. “Small Scale Mapping 

Standards and Symbols,” Reston, VA. Available form U.S. 

Geological Survey, National Center, 12201 Sunrise Valley, 

Reston, VA 22092. 

U.S. Geological Survey. Undated. “Technical Standards 

Manual-National Mapping Division Publication No. 9.03.1,” 

Reston, VA. Available from U.S. Geological Survey, 

National Center, 12201 Sunrise Valley, Reston, VA 22092. 

U.S. Army Corps of Engineers. 1990. “Engineering and 

Design Standards Manual for U.S. Army Corps of 

Engineers Computer-Aided Design and Drafting (CADD) 

Systems, Louisville District. Available from Information 

Technology Laboratory, 3909 Halls Ferry Road, Vicksburg, 

Mississippi 39180-6199. 

ANSI Y32.9-72 

Graphic Symbols for Electrical 

Wiring and Layout for Electrical 

Wiring and Layout Diagrams 

Used in Architecture and 



January 2010 

CHAPTER 8 Geographic Information Systems 

(GIS)Standards and Submittal Requirements 

The Authority has established an enterprise GIS program, 

referred to herein as the “Authority GIS”. The Authority GIS 

is intended to support numerous different business 

processes, ranging from (and not limited to) lease and 

tenant management, computerized maintenance 

management (CMMS), landside and airside operations, 

public safety, master planning and environmental 

management. 

To support these and other Authority business processes, 

the Authority GIS must include an accurate and complete 

representation of facilities and assets across both airport 

campuses. A key strategy for ensuring accuracy and 

completeness of the map (spatial) data within the Authority 

GIS database is to integrate data from design and 

construction activities, upon submittal to the Authority 

Program Manager by the A/E and/or contractor. 

The A/E shall coordinate with the Authority to ensure that all 

GIS work and submittals are completed in compliance with 

the following: 

8.1 Applicability: The A/E is required to provide a GIS 

submittal matching the CADD design drawings at the final 

design submittal milestone and, if applicable, when 

conformed sets are submitted following the final design 

submittal milestone. The contractor is required to provide a 

GIS submittal matching the CADD record (or, if applicable, 

as-built) drawings. This requirement applies to the following 

design and construction activities: 

A. Capital Construction (CCP) design projects. 

B. Capital Operations and Maintenance Improvement 

Program (COMIP) design projects. 

8.2 Creating GIS Features from CADD Model Files: 

When providing a GIS submittal the A/E or contractor shall 

provide spatial data matching the features as rendered in 

the CADD drawing model files (containing the physical 

facility or asset components; buildings, aprons, runways, 

roads, fences, etc.), in real-world coordinates as further 

described in Section 8.3.1. 

The A/E and contractor shall not create GIS submittals 

separately from their CADD submittals. GIS submittals shall 

be created by making a copy of features in the CADD 

model files and converting those features to GIS format, to 

ensure a match between the CADD and GIS submittals. 

Sheet files for plotting (including borders, title blocks, etc.) 

shall not be included in the GIS submittal. 

8.3 Structure and Organization of GIS Submittals: 

GIS submittals shall adhere to the following additional 

structural requirements and standards. Project specific 

requirements based on the underling standards, if any, will 

be provided in the contract scope of work: 

8.3.1 File Format: All GIS data shall be submitted to the 

Authority in Environmental Systems Research Institute 

(ESRI) shapefile (SHP) format. One shapefile will be 

provided for each required GIS layer/feature class (see 

Section 8.3.3 below). 

8.3.2 Coordinate system: All GIS data shall be submitted 

in Virginia State Plane feet coordinate system using North 

American Datum (NAD) 83 and Geographic Reference 

System (GRS) 80 ellipsoid. All vertical measurements in the 

GIS submittals should be recorded based on the North 

American Vertical Datum (NAVD) 88 at Dulles International 

Airport and the National Geodetic Vertical Datum (NGVD) 

29 at Reagan National Airport. 

C. Large tenant design projects resulting in new 

facilities, buildings or other structures. 

D. Airline and concession tenant projects in the interior 

of terminals, concourses and other buildings. 

The accompanying CADD drawings shall continue to be 

submitted using decimal coordinates and the Airport 

Coordinate System (ACS) as described in Section 2.4.3. 



January 2010 

8.3.3 Required GIS Submittal Content: At the beginning 

of each design or construction project the Authority Project 

Manager will provide the A/E or contractor with an 

indication of the geographic “footprint” (or limits) for the GIS 

deliverable and will also indicate which layers in the 

Authority GIS or FAA Airports GIS Database Dictionaries 

(see Section 8.3.4) will be required for submittal. 

8.3.4 Layer/Feature Class Assignments: GIS layers, or 

feature classes, are analogous to overlays in manual 

drafting systems and to layer/levels within a CADD drawing. 

Each GIS layer/feature class contains a logical grouping of 

features within a common feature type (e.g., buildings, 

roads, aprons, etc.). GIS submittals will be organized using 

one of two layering schemes, depending on the nature of 

the project and delivery milestone: 

8.3.4.1 Authority GIS Database Dictionary: In all cases, 

the GIS submittal for final design plans shall be organized 

using the layers/feature classes as defined in the Authority 

GIS Database Dictionary (defining the layers/feature 

classes in the Authority GIS and the definitions indicating 

what features are included in each feature class). 

8.3.4.2 Federal Aviation Administration (FAA) Airports 

GIS Database Dictionary: The Federal Aviation 

Administration (FAA) Advisory Circular (AC) 150/5300-18C 

(signed May 2009) requires submittal of spatial data for 

design projects paid for in part or in full by FAA Airport 

Improvement Program (AIP) or Passenger Facility Charge 

(PFC) grant funds. AC 150/5300-18 includes information on 

the FAA Airports GIS database dictionary. 

A. For projects funded in part or in full by FAA AIP or 

PFC grant funds, the GIS submittal accompanying 

record drawings at the end of the construction phase 

shall be organized using the layers/feature classes as 

defined in the most current version of the FAA Airports 

GIS Database Dictionary in FAA AC 150/5300-18. 

B. For projects funded in part or in full by FAA AIP or 

PFC grant funds, the GIS submittal shall be 

accompanied by a Survey Plan and Spatial Data 

Collection Quality Control (QC) Plan as required by and 

defined within the most current version of the FAA AC 

150/5300-18. 

C. For projects not funded in part or in full by FAA AIP 

or PFC grant funds, the GIS submittal accompanying 


shall be organized using the Authority GIS Database 

Dictionary, in a fashion similar to the GIS submittal at 

the final design milestone. 

8.3.5 Attribution: Each feature in each layer/level of the 

GIS submittal will contain a number of associated attributes 

(stored in the ESRI shapefile). The following attributes are 

required as part of each GIS submittal: 

A. GIS Submittals organized using the Authority GIS 

Database Dictionary: For all GIS submittals at the final 

design milestone and for GIS submittals accompanying 


where no FAA submittal is required, each layer/feature 

class will include required attributes as per the 

Authority GIS Database Dictionary. The Authority GIS 

Database Dictionary indicates required attributes, 

optional attributes and in some cases valid attribute 

values. 

B. GIS Submittals organized using the FAA Airport 

GIS Database Dictionary: For GIS submittals 

accompanying record drawings at the end of the 

construction phase, where FAA submittal is required, 

each layer/feature class will include required attributes 

as per the FAA Airports GIS Database Dictionary 

(included in the most current version of the FAA AC 

150/5300-18) and a set of additional attributes from the 

Authority GIS Database Dictionary. 

The construction contract scope of work will indicate 

which attributes from the Authority GIS Database 

Dictionary shall be included in addition to FAA-required 

attributes. 



January 2010 

Like the Authority GIS Database Dictionary, the FAA 

Airports GIS Database Dictionary indicates required 

and optional attributes as well as valid attribute values 

were appropriate. 

8.3.6 Metadata: Each GIS submittal will include layer-level 

and feature-level metadata. The following metadata are 

required as part of each GIS submittal: 

8.4 Requirements for Ensuring High Quality GIS 

Deliverables 

This section provides a set of required practices A/Es and 

contractors must follow when building and preparing CADD 

files to facilitate GIS integration. These practices are 

adopted from industry best practice recommendations for 

ensuring proper CADD and GIS coordination and 

integration. 

A. GIS Submittals organized using the Authority GIS 

Database Dictionary: For all GIS submittals at the final 

design milestone and for GIS submittals accompanying 


where no FAA submittal is required, each GIS submittal 

layer/feature class shall include metadata as defined in 

the Authority GIS Metadata Specification. 

The Authority and its Program Manager reserve the right to 

perform quality control checks to ensure CADD content is 

compiled in accordance with these practices to ensure highquality 

GIS deliverables. 

By adhering to a set of required practices for building CADD 

files: 

B. GIS Submittals organized using the FAA Airport 

GIS Database Dictionary: For GIS submittals 

accompanying record drawings at the end of the 

construction phase, where FAA submittal is required, 

those GIS submittals will include metadata as defined 

in the FAA Airports GIS Database Dictionary (included 

in the most current version of the FAA AC 150/5300- 

18) and metadata as defined in the Authority GIS 

Metadata Specification. 

A. A/Es and contractors will find the effort to create the 

associated GIS deliverables will be less than that when 

not applying a set of required practices. Additionally, 

the process to convert CADD data to GIS format for 

delivery to the Authority will be repeatable and 

understandable by all stakeholders. 

B. A/Es and contractors are more likely to have the 

Authority accept first-time CADD and GIS submittals. 

8.3.7 Additional notes on Authority GIS Database 

Dictionary and Metadata Specification: 

A. The Authority GIS Database Dictionary and 

Metadata Specification will be provided to the A/E 

and/or contractor upon contract award, and can be 

provided in advance of award upon request. 

B. The Authority GIS Database Dictionary includes a 

“mapping” (association) of layer/levels in the Authority 

CADD Design Standard to the layer/feature classes in 

the Authority GIS Database Dictionary. This will assist 

A/Es and contractors in creating GIS submittals from 

CADD design drawings and record drawings. 

C. The Authority is better assured that the GIS 

deliverables derived from CADD drawings contain 

spatial data that are properly structured and of better 

and more consistent quality. 

8.4.1 Complex vs. Simple Geometry Types: when 

drafting line and polygon features in the CADD 

environment, those features shall be built using simple 

geometry types (feature shapes are determined by a set 

number of vertices along a line or polygon edge). An 

appropriate number of vertices should be placed to ensure 

an appropriate accuracy for the features. Exhibit I-8-1 

illustrates the use of vertices to create accurate features 

using simple geometry types. Complex geometry types 

such as arcs, circles, donuts, ellipses will not be supported. 



January 2010 

Snapping End Vertices for Adjacent Line Features 

Exhibit I-8-2 

Simple Geometry Types – Using Vertices to 

Accurately Portray Line or Polygon Shape 

Exhibit I-8-1 

8.4.2 Topological Integrity: when drafting features that 

are connected or adjacent in the real world (such as 

adjacent walls, two pipes meeting at a junction, etc.) or 

drafting closed features (such as pavement sections, 

building roof-lines, or property boundaries), the features 

shall be drawn such that the feature endpoints or edges 

meet geometrically at “shared” vertices. The specific rules 

shall apply when drafting line features in CADD drawings: 

8.4.2.1 Lines: The following practices should be observed 

when compiling linework in CADD model files for GIS 

integration: 

A. Two or more line features of the same feature type 

(e.g., road centerline) should be “broken” to begin and 

end at the intersection location (i.e., two lines of the 

same type should not overlap), as illustrated in Exhibit 

I-8-2. 

C. Line features should contain an appropriate number 

of intermediate vertices placed at intervals such that 

the line feature does not stray from the actual feature 

by more than ½ the positional accuracy limit, as shown 

in Exhibit I-8-1. 

D. Lines should be “broken” where the characteristics 

of a feature changes. For example, two adjacent lines 

representing stormwater drainage pipes should be 

broken where the pipe diameter or material changes. 

8.4.2.2 Polygons: The following practices should be 

observed when compiling polygons (areas) in CADD model 

files for GIS integration: 

A. Polygons (or individual lines that enclose to define 

an area) should be closed by snapping the line 

endpoint vertices to an identical X, Y coordinate as 

shown in Exhibit I-8-3. 

B. End-vertices of connecting or intersecting line 

segments should collated (i.e., be snapped to the same 

location with identical X, Y coordinates), also illustrated 

in Exhibit I-8-2. 

Polygon Closure via Collocated End Vertices 

Exhibit I-8-3 



January 2010 

B. Adjacent polygons sharing an edge must have the 

same collocated vertices along that edge as shown in 

Exhibit I-8-4. This rule applies to adjacent features of 

the same type (e.g., pavement sections) and adjacent 

features of different feature types (e.g., taxiway vs. 

apron). 

Shared Vertices along Shared Polygon Edges 

Exhibit I-8-4 

C. No polygons will overlap, intersect or fall fully within 

another polygon of the same type (e.g., two buildings 

cannot overlap and a building polygon should not sit 

within another building polygon) unless exceptions are 

otherwise noted in the Authority CADD Design 

Standards, Authority GIS Database Dictionary or 

contractual documents. See Exhibit I-8-5 for example 

of overlapping and intersecting polygons. 

8.4.3 Directionality for Linework: when building a 

network of linear features where direction is significant 

(e.g., surface drainage hydrography, storm drainage 

network, sanitary sewer network), draw linear objects in the 

direction of flow. 

8.4.4 Use of Custom and Continuous Linestyles: 

Custom and continuous line styles may both be used to 

depict linear features in a CADD environment. In either 

case, when those line features are converted to GIS format, 

the coordinates that define that linear feature are 

recognized by the GIS, not any custom line display style 

(such as that shown in Exhibit I-8-6 below). Therefore the 

linear feature will be properly represented in a GIS 

environment regardless of custom display styles enabled in 

AutoCAD or MicroStation. 

8.4.5 Block and Cell Insertion Points: When converted 

to GIS features, AutoCAD blocks and MicroStation cells are 

“collapsed” to single X, Y point features at the block or cell 

insertion point. Therefore the insertion point of the blocks 

and cells must be defined in such way that is intuitive for 

CADD operators, but that also facilitates conversion to GIS 

and establishment of GIS topology. For example, an 

AutoCAD cell representing a manhole may be constructed 

as a simple open circle; in this case the cell insertion point 

should be in the center of the circle. In this fashion it should 

be intuitive to CADD technicians when placing the manhole 

symbol in the CADD drawing and snapping associated 

linework to the cell insertion point. And when the manhole 

feature in CADD is converted to a GIS feature, the manhole 

will be represented as a single X, Y coordinate at the cell 

insertion point. Therefore in GIS the associated lines will be 

properly “snapped” to the manhole point. 

Overlapping and Intersecting Polygons 

Exhibit I-8-5 

Exhibit I-8-6 illustrates this concept. The figure depicts two 

examples of a sewer pipe with a manhole at the end of the 

line. In both cases the insertion point of the manhole is the 

center of the circle. In the example on the left (Case 1 in 

Exhibit I-8-6) the cell insertion point is not at the end of the 

line, while the one on the right (case 2) shows the cell 

inserted at the end of the line. Since CADD block and cells 

are simply points in the GIS world, the insertion point of the 



January 2010 

block will become the X, Y coordinate of the point. If the 

block insertion points are not “snapped” to their respective 

alignments, establishment of topological relationships will 

be difficult and significant level of effort required to process 

CADD data elements to associated blocks and cells with 

lines such that GIS topology can be established. 

Snapping Line Endpoints to Cell/Block Insertion Points 

Exhibit I-8-6 

8.4.6 Snapping Blocks and Cells to Line Endpoints: 

When using AutoCAD blocks or MicroStation cells to 

represent real world features such as manholes, valves, or 

doors, associated line features should be drawn/extended 

to the insertion point for each cell, thereby ensuring that line 

endpoint vertices are collocated (identical to) the block or 

cell insertion point as shown in Exhibit I-8-6 above. 



January 2010 

SECTION II: Aerial Photography 

CHAPTER 1 Introduction 

The following standards shall be utilized when generating base map files for the Authority or an Airport Layout Plan (ALP). 

DRAWING FILE NAMING CONVENTIONS 

AIRPORT CODE 

XXXM-./DGN 

(when four (4) digits are in Airport code - use first three) 

MAINTAINED/PLANNED/TEMPORARY (work in progress) 

USE BREAKDOWN 

LA Layout 

CJ Contour Major CN Contour Minor 

VJ Vegetation Major VN Vegetation Minor 

AJ Access Major AN Access Minor 

SJ Structure Major SN Structure Minor 

UJ Utilities Major UN Utilities Minor 

WJ Water Major WN Water Minor 

ALP SET 

(Second digit to be used for additional sheets) 

Final Signed/Approved ALP Drawings should be locked! 

A1 

B1 

C1 

D1 

E1 

F1 

G1 

H1 

Airport Layout Plan 

Airport Airspace Drawing - Plan View 

Airport Airspace Drawing - Profile View 

Runway End Area Drawing (RPZ) 

Terminal Area Drawing (Building Area Plan) 

Land Use (second digit to be; E= EXISTING, F= FUTURE) 

Airport Property Map 

Cover Sheet 

EXTRA SHEETS (Second digit to be used for addition sheets) 

I1 

J1 

K 

L1 

M1 

N1 

O1 

P1 

Apron Utilization Plan 

NAVAID/Data Sheet 

Utilities (Second digit to be: 1 - Electrical; 2 - Water System; 3 - Sewerage; 4 - Fuel) 

Noise Contours 

Flight Tracks 

Biotic Communities 

Environmental/Wetlands 

Taxiway Flow Diagram 

Aerial Photography CADD - Page 291 Section II


January 2010 

Q1 Taxiway Designation Plan 

R1 Taxiway Designation Plan 

S1 Concept Alternatives 

T1 Staging Plan 

U1 - 

V1 - 

W1 - 

X1 - 

Y1 Line of Sight Drawing 

Z1 Shadow Diagram 



January 2010 

LAYER/LEVEL COLORS, PEN WEIGHTS AND SCREENS 

COLOR ACAD MSTATION MILS MIL LEROY SCREEN 

Red 1 3 .25 10 000 None 

Yellow 2 4 .50 20 1 None 

Green 3 2 .30 13 00 None 

Cyan 4 7 .35 15 0 None 

Blue 5 1 .18 8 0000 None 

Magenta 6 5 .60 25 2 None 

White (Black) 7 0 .70 28 2.5 None 

Gray 8 9 .80 31 3 None 

Dark Red 9 10 (Lt) .25 10 000 None 

Dark Yellow 10 11 (Lt) .50 20 1 65% 

Dark Green 11 12 (Lt) .30 13 00 65% 

Dark Cyan 12 14 (Lt) .35 15 0 65% 

Dark Blue 13 6 (Orange) .18 8 0000 65% 

Dark Magenta 14 13 (Lt Purple) .60 25 2 65% 

Dark Gray 15 8 Black 2.00 80 7 65% 

LINE TYPES 

AUTOCAD 

USTATION 

C = Continuous Line LC = 0 

D1 = Dashed Line LC = 3 

D2 = Dash-Dot Line LC = 4 

CL = Centerline LC = 7 

PH = Phantom LC = 6 

HI = Hidden LC - 5 



January 2010 

DATA SEGREGATION - BASE DATA 

(ALL ELEVATIONS EXPRESSED AS ABOVE MEAN SEA LEVEL - AMSL) 

(ALL COLORS WILL BE DEFINED BY ENTITY) 

e.g. Layer/Level Name = (M OR P)LA(NUMBER) 

___LA___ LAYOUT 

LAYER 

LEVEL 

ITEM(S) SYMBOL COLOR L TYPE 

1 Reserved – Working - 

2 Runway Endpoint Nodes, Runway Centerline, ARP Ci066/ARP White C 

3 OC Listed Obstructions (Refer to List) White C 

4 DOT Listed Obstructions (Refer to List) Green C 

5 Control Points, Ties, Traverse & Base Lines Ci066 White C 

6 Reserved 

7 Reserved 

8 Reserved 

9 Bench Markers Ci003 Red C 

10 Reserved 

11 Reserved 

12 Grid – Geodetic - Dk Blue C 

13 Grid – State Plane - Dk Blue C 

14 Grid – Airport - Dk Blue C 

15 Grid – Airport Emergency Net - Dk Blue C 

16 Public Land Survey/Section Corner Ci007 Red C 

17 Reserved 

18 Reserved 

19 Boundary – Airport - White PH 

20 Boundary – Government - Magenta PH 

21 Boundary – Navigation Easement - White C 

22 Boundary – Right-of-Way - Blue PH 

23 Boundary – Leasehold - Blue PH 

24 Reserved 

25 Reserved 

26 Runway End Area (RPZ) Outline - Yellow D2 

27 Runway End Area Details - Red D1 

28 Runway Visibility Zone - Red D2 

29 Reserved 

30 Reserved 



January 2010 

LAYER 

LEVEL 


31 Safety Area – Runway - Red PH 

32 Safety Area – Taxiway - Red PH 

33 Reserved 

34 Reserved 

36 Critical Area – ILS - Yellow HI 

37 Critical Area – MLS - Yellow HI 

38 Critical Area – ASR - Yellow HI 

39 Critical Area – VOR/Vortac - Yellow HI 

40 Clearing Limits – Light Lanes - Dk Red D2 

41 Reserved 

42 Reserved 

43 Restriction Line – Building - Green D2 

44 Restriction Line – Obstacle - Green D2 

45 Restriction Line – Tail Limit (DC10, 747, Etc.) - Red D2 

46 Aircraft Containment Line (Parking Limit) - Yellow D2 

47 Reserved 

48 Reserved 

49 Reserved 

50 Reserved 

51 Reserved 

52 Reserved 

53 Reserved 

54 Reserved 

55 Reserved 

56 Reserved 

57 Reserved 

58 

Data Blocks, Schedules, Tables, Sheet Border, Tics, Title 

Block Data 

White 

C 

59 Hatch, Poche Dk Red - 

60 Decommissioned, Abandoned, To Be Removed Dk Blue C 

61 Dimensions Blue C 

62 Misc. Text Green C 

63 Unidentified Features White C 



January 2010 

(ALL ELEVATIONS EXPRESSED AS ABOVE MEAN SEA LEVEL-AMSL) 

e.g. Layer/Level Name = (M or P) CJ(Number) 

__CJ__ 

CONTOUR MAJOR 

LAYER 

LEVEL 


1 Reserved – Working 

2 

Major Index Contour & Text (Intervals = 5 feet, 10 feet, or 2 

meter) 

- Dk Cyan C 

3 Major Depression Contour and Text - Dk Green C 

4 Spot Elevations Ci066 Dk Green C 

5 Ridge Lines - Dk Blue C 

6 Valley Drainage Flow Ci054 Dk Red C 

7 Isolated Spot Elevations Ci066 Dk Green C 

8 Isolated Ridge Lines - Dk Blue C 

9 Isolated Valley Drainage Ci054 Dk Red C 

10 Reserved 

58 Data Blocks, Schedules, Tables - Green C 

59 Hatch, Poche - White - 

60 Decommissioned, Abandoned To Be Removed - Dk Blue C 

61 Dimensions - Blue C 

62 Misc. Text - Green C 

63 Unidentified Features - White C 



January 2010 


e.g. LAYER/LEVEL NAME = (M OR P) CN(NUMBER) 

__CN__ 

CONTOUR MINOR 

LAYER 

LEVEL 


1-10 Previously Used 


12 Intermediate Index Contour - Dk Red C 

13 Intermediate Depression Contour - Dk Blue C 

14 Tidal, Flat, Sand Bar Tideflat Dk Blue C 

15 Rock Outcrop, Dry Wash - Dk Blue C 

58 


Block Data 

- White C 

59 Hatch, Poche - Dk Red - 

60 Decommissioned, Abandoned, To Be Removed - Dk Blue C 






January 2010 


e.g. Layer/Level Name = (M or P) WJ(Number) 

__WJ__ 

WATER MAJOR 

LAYER 

LEVEL 




17 Shoreline – Ocean, Lake Pond (>100 feet width) - Green C 

18 Shoreline – Canal, River, Stream (>6 feet width) - Green C 

19 Reserved 

20 Reserved 

21 Reserved 

22 Reserved 

23 Reserved 

58 Data Blocks, Schedules, Tales - Green C 

59 Hatch, Poche - White - 







January 2010 


e.g. Layer/Level Name = (M or P) WN(Number) 

__WN__ 

WATER MINOR 

LAYER 

LEVEL 




25 Centerline – Canal – Stream, Ditch (


January 2010 


e.g. Layer/Level Name = (M or P) VJ(Number) 

__VJ__ 

VEGETATION MAJOR 

NOTE: Bushes or Trees>10 feet (+Ten Feet) above ground are considered trees for these standards. 

LAYER 

LEVEL 




34 Individual Tree>100 feet Above Ground Level 

ShTree/ 

PalmTree 

Green 

C 

35 Top Elevation - Red C 

36 Individual Tree100 feet Above Ground Level 

ShTree/ 

PalmTree 

Green 

C 

41 Isolated Individual Tree


January 2010 


e.g. Layer/Level Name = (M or P) VN(Number) 

__VN__ 

VEGETATION MINOR 

NOTE: Bushes or Trees>10 feet(+Ten Feet) above ground are considered trees for these standards. 

LAYER 

LEVEL 




45 Individual Bush>4 feet Above Ground Level ShTree Green C 

46 Individual Bush>2 feet To 4 feet Above Ground Level ShTree (.5X) Green C 

52 Isolated Individual Bush>2 to


January 2010 


e.g. Layer/Level Name = (M or P) AJ(Number) 

_AJ__ 

ACCESS MAJOR 

LAYER 

LEVEL 



2 Pavement, Airfield Sod/Dirt or Water - Dk Yellow C 

3 Concrete Runway - White C 

4 Taxi or Apron Asphalt Runway - White C 

5 Taxi or Apron Bridge-Aircraft - Green C 

6 Isolated Sod/Dirt or Water TWY and Tiedown - Dk Yellow C 

7 Isolated Concrete Runway, Taxiway or Apron - White C 

8 Isolated Asphalt Runway, Taxiway or Apron - White C 

9 Reserved 

10 

Pavement Roadway – Interstate, Express Way, Toll Way, 

US/State Hwy., and Other Arterial 

- Cyan C 

11 Local Streets & Major Parking Areas - Cyan C 

12 Bridge – Vehicle/Pedestrian - Green C 

13 Restricted Access (Defined Through ALP Process) - Green C 

14 Isolated Bridge Subway - Green C 

15 Reserved Roadway Text - White C 

16 Reserved Isolated Cur - Blue C 

17 Railroad - Red D2 

18 Above Ground Transport, People Mover - Green C 

19 Subway - Red D2 

20 Ferry Route Bus Route - Red C 

21 Fence/Gate-Airfield Security (Defined in ALP Process) Fence Red C 

22 Airfield Security Gate ID’s Red C 

23 Reserved 

24 Reserved 

25-35 Reserved 

58 


Block Data 

- White C 

59 Airfield Text - White C 






January 2010 

LAYER 

LEVEL 


63 Misc. Text - White C 




January 2010 


e.g. Layer/Level Name = (M or P) AN(Number) 

__AN__ 

ACCESS MINOR 

LAYER 

LEVEL 




37 Airfield Shoulders, Overruns, Blast Pads - Dk Green C 

38 Runway Markers - Dk Red C 

39 Taxiway, Apron Markings - Dk Red C 

40 Isolated Airfield, Vehicle Pad - Dk Green C 

41 Airfield - C 

42 Vehicle Lane - Dk Red C 

43 Dirt, Gravel Roads, Trails - Dk Blue C 

44 Parking Lot Details - Dk Blue C 

45 Sidewalks, Malls, Recreational Pavement Dk Blue 

46 Guardrails – Vehicle/Pedestrian Guardrails Dk Blue C 

47 Streetside, Pavement Mark - Dk Blue C 

48 Isolated Parking Lot Details - Dk Blue C 

49 Gate Pad Numbers - Dk Blue C 

50 Gate Pad Marking - Dk Red C 

51 Isolated Gate Pad Markings 


58 


Block Sata 

- White C 








January 2010 


e.g. Layer/Level Name = (M or P) SJ(Number) 

__SJ__ 

STRUCTURE MAJOR 

LAYER 

LEVEL 



2 Airfield: Lighting – Runway End Identified (Reil) Light Red C 

3 Lighting – Approach Light Red C 

4 

Navigational Aids: Anemometer, Localizer, RVR, Elevation 

Array, Azimuth Array, Glide Slope, PAPI, VASI, ASOS, 

Transmission Meter 

(Refer to List) Red C 

5 Passenger Loading Bridge - Red C 

6 Terminal AIDS-VOR, Vortac (Refer to List) Red C 

7 Reserved 

8 

Buildings: Foundation, Footprint/Building Under 

Construction 

- Blue C 

9 External Walls - Green C 

10 Roofing, Ridge, Valley, Hip Line - Magenta C 

11 Roof Spot Elevations - Dk Red C 

12 Rooftop Features: Antenna, Satellite Dish - Red C 

13 

14 

15 

Sign, External, Features, Chimney, Coping, Façade, 

Parapet 

Clock or Bell Tower, Steeple, Pole-Post, Flag, Lighting 

Protection 

Dome, Dormer, Penthouse, Skylight (Outline, Peak and 

Ridge Line) 

- Green C 

- Red C 

- Yellow C 

16 HVAC Equipment: (Air Handler, Cooling Tower, Etc.) - Cyan C 

17 Reserved 

18 Dam, Flood Control, Headwall, Culvert - Green C 

19 Dock: Vehicle Loading - Red C 

20 Dock: Ship, Boat and Related Equipment - Green C 

21 Fence, Gate Fence Red Hi 

22 Lighthouse, Silo, Smoke Stack, Bell/Clock Tower Green C Bus Shelter 

23 Tank/Tower: Water, Fuel, Chemical - Green C 

24 Tower: Antenna/Power Transmission - Green C 

25 Tunnel, Retaining Wall - Red DI 

26 Windmill, Water Though, Blast Fence - Red C 

27 Isolated Dam, Flood Control, Headwall, Culvert - Green C 

28 Isolated Dock: Ship, Boat and Related Equipment - Green C 



January 2010 

LAYER 

LEVEL 


58 


Block Data 

- White C 




62 All Text - White C 




January 2010 


e.g. Layer/Level Name = (M or P) SN(Number) 

__SN__ 

STRUCTURE MINOR 

LAYER 

LEVEL 




30 Airfield: Aircraft Outline - Cyan C 

31 Airfield Signs - Blue C 

32 Lighting: Runway, Taxiway, Apron Edge Light Dk Blue C 

33 Lighting: Apron Security Light Red C 

34 Terminal/Ground Support Equipment - Dk Blue C 

35 Reserved 

36 

Buildings: Rooftop Features: External Stairs, Ladder, Fire 

Escape 

- Blue C 

37 Fence, Guardrail Fence Red C 

38 HVAC Equipment (Vent Pipe, Ventilation) - Dk Red C 

39 Lightning Protection, Flag, Pool/Patio Area - Dk Blue C 

40 Canopy, Carport, Porch, Shelter, Storage/Utility Shed - Red C 

41 Columns, Pillars, Plaster, Flying Buttress - Blue C 

42 Generator, Compressor, Chiller - Red C 

43 Steps, Stairs, Fire Escape, Pedestrian Ramp - Dk Blue C 

44 Terrace Outline/String - Blue C 

45 Recreation and Park Area Outline - Blue C 

46 Golf Course and Sports Complex/Area Outline - Blue C 

47 Area Outline, Snow Dump - Blue C 

48 

Pole/Post, Banner, Billboards, Signs, Flag, Conveyor, 

Crane, External Pipe/Ductwork 

- Dk Blue C 

49 Street, Security and Utility Lighting - Red C 

50 Pool-Swimming, Fountain - Blue C 

51 Traffic Control Light, Signal Equipment Shelter Light Dk Red C 

52 

Vehicle and Service Equipment Hoist, Gas Pump, Trash 

Bin, Compactor, Vacuum/Air Station 

- Blue C 

53 Isolated Canopy, Carport, Etc. (Refer to List) Dk Blue C 

54 

Isolated Pole/Post, Etc. from Layer/Level 48 Buildings, 

Runway 

(Refer to List) Dk Blue C 


58 


Block Data 

- White C 



January 2010 

LAYER 

LEVEL 


59 Misc. Text - Dk Red - 

60 Decommissioned Abandoned, To Be Removed - Dk Blue C 


62 Text - Green C 




January 2010 


e.g. Layer/Level Name = (M or P) UJ(Number) 

__UJ__ 

UTILITIES MAJOR ABOVE GROUND 

LAYER 

LEVEL 



2 Utilities Access System - Blue C 

3 Electrical: Airfield Lighting Vault, Emergency Generator - Green C 

4 FAA Cabling System - Red C 

5 High Voltage Power Line HV Pole Red C 

6 Electrical Manhole Cover Red C 

7 Electrical Junction Box Cover Red C 

8 HVAC: Heating, Ventilation, Air Condition - Red C 

9 Isolated Heating Ventilation, Air Condition - Red C 

10 Communications: FAA Cables - Red D2 

11 Telephone - Red D2 

12 TV, Optical Cable - Red D1 

13 Communications Manhole Cover Red C 

14 

Water Supply: Well, Well Field, Reservoir Pumping 

Equipment 

- Blue C 

15 Treatment Facility - Blue C 

16 Fire Hydrant and Fire - Blue C 

17 

Fighting Water: Water Manhole Cover and Water Valve 

Box Cover 

Blue 

C 

18 Sewerage: Storm Water System/Catch Basins - Red C 

19 Wastewater Treatment Facility - Red C 

20 Sewer Manhole Cover Red C 

21 Sewer Valve Box Cover Red C 

22 Fuel: Liquid Fuel Facilities: Pressure - Yellow C 

23 Liquid Fuel Facilities: Gravity - Yellow C 

24 Hydrant Fueling System - Yellow C 

25 Gaseous Fuel Facilities (Propane, Natural) - Yellow C 

26 Fueling Manhole Cover Yellow C 

27 Fuel Pit Cover Yellow C 

58 


Block Data 

- White C 





January 2010 

LAYER 

LEVEL 







January 2010 


e.g. Layer/Level Name = (M or P) UN(Number) 

__UN__ 

UTILITIES MINOR BELOW GROUND 

LAYER 

LEVEL 




31 Utilities Access System - Blue C 

32 Electrical: Airfield Lighting Vault, Emergency Generator - Green C 

33 FAA Cabling System - Red C 

34 Low Voltage Power Line LV Pole Blue C 

35 High Voltage Power Line HV Pole Red C 

36 HVAC: Heating, Ventilation, Air Condition - Red C 

37 Isolated Heating Ventilation, Air Condition - Red C 

38 Communications: FAA Cables - Red D2 

39 Telephone - Red D2 

40 TV, Optical Cable - Red D1 

41 Reserved 

42 Reserved 

42 Water Supply: Reservoir Pumping Equipment - Red C 

44 Fire Hydrant and Fire Fighting Water - Red C 

45 Reserved 

46 Sewerage: Storm Water System/Catch Basins - Red C 

47 Wastewater System - Red C 

48 Reserved 

49 Reserved 

50 Fuel: Liquid Fuel Facilities: Pressure - Red C 

51 Liquid Fuel Facilities: Gravity - Red C 

52 Hydrant Fueling System - Red C 

53 Gaseous Fuel Facilities (Propane, Natural) - Red C 

54 Reserved 

58 


Block Data 

- White C 





January 2010 

LAYER 

LEVEL 







January 2010 

LIST OF EXHIBITS 

SECTION I: CADD Standards .............................................................................................................................................. 13 

CHAPTER 2 General Standards........................................................................................................................................... 15 

Exhibit I-2-1 IAD Project Grid ............................................................................................................................. 17 

Exhibit I-2-2 DCA project grid ............................................................................................................................. 18 

CHAPTER 3 Drawing File Information................................................................................................................................. 33 

Exhibit I-3-1 Model File Naming Convention ...................................................................................................... 34 

Exhibit I-3-2 Sheet File Naming Convention....................................................................................................... 35 

Exhibit I-3-3 Addendum File Naming Convention.............................................................................................. 36 

Exhibit I-3-4 Authority Standard Drawing Sheet Titleblock For IAD ................................................................... 37 

Exhibit I-3-5 Authority Standard Cover Sheet For IAD ....................................................................................... 38 

Exhibit I-3-6 Authority Enlarged Plan Sheet For IAD.......................................................................................... 39 

Exhibit I-3-7 Authority Standard Drawing Sheet Titleblock For DCA.................................................................. 40 

Exhibit I-3-8 Authority Standard Cover Sheet For DCA...................................................................................... 41 

Exhibit I-3-9 Authority Standard Addenda or Sketches Sheet............................................................................ 42 

CHAPTER 8 Geographic Information Systems (GIS)Standards and Submittal Requirements ................................... 285 

Exhibit I-8-1 Simple Geometry Types – Using Vertices to Accurately Portray Line or Polygon Shape............ 288 

Exhibit I-8-2 Snapping End Vertices for Adjacent Line Features...................................................................... 288 

Exhibit I-8-3 Polygon Closure via Collocated End Vertices .............................................................................. 288 

Exhibit I-8-4 Shared Vertices along Shared Polygon Edges ............................................................................ 289 

Exhibit I-8-5 Overlapping and Intersecting Polygons........................................................................................ 289 

Exhibit I-8-6 Snapping Line Endpoints to Cell/Block Insertion Points............................................................... 290 


List of Exhibits


January 2010 



List of Exhibits


January 2010 

INDEX 

Note: Page numbers followed by e or t indicate Exhibits and 

Tables, respectively. 

A 

abbreviations for references and support files, 283 

access. See also security and access control systems 

baggage handling system, 241–242t 

structural buildings, 140t, 143t 

structural civil, 151t, 154t, 156t 

ACS (Airport Coordinate System), 16 

Addenda Sheet, 42e 

addenda sketches, 33 

addendum files, naming conventions, 36e 

AED (automated external defibrillator), 257t 

aerial photography 

colors, pen weights and screens, 293t 

data segregation-base data 

Access Major, 302–303t 

Access Minor, 304t 

Contour Major, 296t 

Contour Minor, 297t 

Layout, 294–295t 

Structure Major, 305–306t 

Structure Minor, 307–308t 

utilities major above ground, 309–310t 

utilities minor below ground, 311–312t 

Vegetation Major, 300t 

Vegetation Minor, 301t 

Water Major, 298t 

Water Minor, 299t 

drawing file naming conventions, 291–292 

line types, 293t 

airfield lighting plan, 51t, 53, 229–230t 

airfield plan, 105–108t 

airfield traffic areas 

airfield plan, 108t 

Airport Coordinate System (ACS), 16 

airport grid file, global origin on, 16 

Airport Layout Plan (ALP), 291 

alignments 


block and cell insertion points, 290 

eco-restoration plan, 77t 

flood control plan, 91t 

grading plan, 74t 

navigation dredging plan, 84t 

profiles 

civil drawings, 115t 

shore bankline, 80t 

site plan, 63t 

transportation site plan, 101t 

utilities plan, 109t 

ALP (Airport Layout Plan), 291 

annotation levels/layers, 27, 29 

anti-freeze, 205t 

aprons, 285, 286, 289 


profiles 


X-sections 


aqueous film forming foam system, 185t 

architectural drawings 

area calculations/occupancy plan, 169t 

demolition plan, 163t 

details, 172t 

elevations, 170t 

equipment plan, 168t 

floor plan, 164–165t 

numbering and organization of, 45t 

reflected ceiling plan, 166t 

roof plan, 167t 

sections, 230t 

sheet level/layer assignments, 268t 

area calculations, 169t 

arrow, north, orientation of, 24 

assignment tables. See level/layer assignments (model 

files); level/layer assignments (sheet files) 

audio paging, 250t 

AutoCAD (Autodesk) 

colors, 21, 21t 

electronic layout files, 283 

origin, 19 

requirements for, 13 

screened colors, 22t 

terminology interchangeable with MicroStation, 15–16t 

automated external defibrillator (AED), 257t 

aviation information systems, 279t 

B 

baggage handling system, 233t, 259, 276t 

Baggage Information Displays (BIDS), 251t 

beams 


structural civil, 156t, 159t 

bell system, 222t 

Bentley MicroStation. See MicroStation (Bentley) 

BIDS (Baggage Information Displays), 251t 

border sheets, 28, 

borings 

geophysical, 130t 

borrow areas, 63t, 74t, 80t, 84t, 91t 

bracing 

structural buildings, 143t 

structural civil, 156t 

bridges. See also structural civil, 44t, 49t, 64t, 70t, 84t, 91t, 

101t, 115t, 122t, 151t, 154t, 156t 

brine system, 205t 


Index


January 2010 

buildings and primary structures. See also structural 

buildings 




hazardous materials drawings, 56t 


profiles 




X-sections 


C 

cable system, 220t, 222t, 234t 

cable television (CATV) systems, 250–251t, 

cabling. See primary electrical cables; secondary electrical 

cables 

CADD files, limitations of, 15 

CADD Standards, 13 

CADD Symbols, 281 

carpet/carpet tile, 178t 

Cartesian coordinates, 19 

cathodic protection system, 226t 

CATV (cable television) system, 250–251t, 

CCTV (closed-circuit television) systems, 222–223t 

ceilings, reflected ceiling plan, 166t 

central dictation system, 223t 

channels 



profiles 




X-sections 


chemical treatment system, 199t 

chilled water system, 199t. See also high 

temperature/chilled water system 

civil drawings 



details, 129t 

drawing/working units for, 16 

eco-restoration plan, 77–79t 


flood control plan, 91–100t 

grading plan, 74–76t 

joint layout plan, 104t 

naming conventions, 49t 

navigation dredging plan, 84–90t 

profiles, 115–120t 


shore bankline, 80–83t 

site plan, 63–73t 

transportation site plan, 101–103t 

utilities plan, 109–114t 

X-sections, 122–128t 

clock system, 223t 

closed-circuit television (CCTV) systems, 222–223t 

CO2 sprinkler system, 185t 

colors 

of lines in graphics, 21 

screened, 22, 22t 

column plan, 146t 

columns 

floor plan, 164t 


common use self service (CUSS) kiosks, 254–255t 

communication systems plan 

exterior, 228t 

intercom/public address system, 223t 

communications 


details, 237t 

riser diagrams, 236t 


telephone/data plan 234–235t 

compact disks, labeling of, 30 

compressed air, 205t 

condenser water system, 199t 

control diagrams, 216t 

control panels 

fire alarm, 190t 

fire protection, 183t 

controls 

baggage handling plan, 240t 

HVAC plan, 199t 

conveyance (elevators, escalators, and moving walks), 

257–258t 

conveyor (baggage handling), 239t 

Cover Sheet Format 

assignment table, 55t 

DCA, 41e 

drawing files, 33 

IAD, 38e 

CUSS (common use self service) kiosks, 254–255t 

D 

data exchange, 29–31 

DCA. See Ronald Reagan Washington National Airport 

decking 



decontamination, 58t 

defibrillators, automated external (AED), 257t 

deliverables, 29–31 

demolition levels/layers, 28 

demolition plan 

architectural, 163t 


baggage handling system, 238t, 241t 


Index


January 2010 


communications, 233t 

electrical, 217t 

electronic monitoring system, 256t 



hazardous materials, 57t 

interiors, 173t 

landscape drawings, 134t 

mechanical, 198t 

plumbing, 193t 

public information system, 249t 

security and access control system, 243t 



Design Manual 

applicability of, 3 

organization of, 3–4 

revisions to, 5–6 

details 


civil, 129t 







landscape, 138t 



security and access control system drawings, 248t 



dimension terminators, 27 

discipline designators, 27, 29, 49t 

disposal areas, 58t 

ditches or washes 



documentation on drawing files, 30–31 

documents, compliance with, 4 

domestic water 



piping plan, 194t 

profiles 




X-sections 

civil drawings, 122–123t 

doors, in floor plan, 164t 

drawing files 

naming conventions, 33, 291–292 

organization of, 44–48t 

setup of, 19–20 

standards for, 19–20 

drawing output, 29 

drawings, text height, 23–24t 

drawing/working units, 16 

dredging plan 

civil site plan, 65t 


navigation, 84–90t 


dual temperature system, 200t 

ductbanks. See underground ductbanks 

dust and fume collection systems, 200t 

E 


electrical cables. See primary electrical cables; secondary 

electrical cables 

electrical drawings 

airfield lighting plan, 229–230t 


details, 231t 

electrical utilities plan, 226–227t 

exterior communications systems plan, 228t 

grounding system plan, 225t 

lighting plan, 218–219t 

mechanical drawings, 46t 


power plan, 220–221t 

riser/one-line diagrams, 232t 


special systems plan, 222–224t 



electronic monitoring systems 


drawings, numbering and organization of, 47t 


elevations 


civil drawings, 73t, 121t 





structural buildings, 147–148t 

elevators, 257–258t 

emergency fixtures, 58t 

energy monitoring control systems, 223t 

energy recovery system, 203t 

equipment 


fire alarm system, 190t 

furniture plan, 174t 

life safety plan, 183t 

material handling, 210t 

specialty mechanical, 205–207t 

telephone/data plan, 234t 


Index


January 2010 

erosion and sediment control. See also riprap and other 

permanent erosion control items 

civil site plan, 65–66t 




escalators, 257–258t 

exhaust air system, 200t 


F 

fabrications 



fasteners and connections 



FIDS (Flight Information Displays), 251t 

file accuracy, 19 

files. See also drawing files 

reference 

abbreviations, 283 


list of, 284 

use of, 28, 33 

three-dimensional, 16 

filled font, 23 

fire alarm systems 


details, 191t 

numbering and organization of, 45–46t 

plan, 190t 



fire protection. See also fire alarm systems 

baggage handling, 240t 


details, 187t 

fire suppression plan, 185–186t 

life safety plan, 183–184t 





fire ratings, 184t 

fire suppression plan, 185–186t 

Flight Information Displays (FIDS), 251t 


flood hazard areas 



floodwalls 


profiles 



X-sections 


floor information 

architectural, 164–165t 

electrical power plan, 220t 


fire suppression plan, 185t 

general drawings, 56t 



piping plan, 194t 

special systems plan, 223t 

specialty piping and equipment, 205–206t 

telephone/data plan, 234t 

floor patterns, 178–179t 

floor plans, 164–165t 

fonts, 23 

foundation plan, 140–142t 

foundations, structural civil, 152t 

framing plan, 143–145t 

fuel system, 206t 

furniture plan, 174–175t 

G 

gates 



general drawings 

model file level/layer assignment tables, 54–56t 


sheet file level/layer assignment tables, 260t 

geotechnical drawings 



geothermal heat pump system, 200t, 208t 

global origin, 16, 17–18e 

glycol system, 200t, 206t 

grade linework 





profiles 





X-sections 



graphic concepts 

dimension terminators, 27 

drawing orientation and north arrow, 24–25 

line color, 21, 21t 

line widths, 20–21, 21t 

presentation graphics, 20 

screening, 22, 22t 

text height, 23–24t 


Index


January 2010 

text orientation, 26 

text styles/fonts, 23 

graphics system drawings, numbering and organization of, 

47t 

grid lines 

key plan, 56t 

profiles 




X-sections 


grid system, 16, 17–18e 


H 

habitats/landforms 


halon system, 185t 

hazardous materials 


details, 61t 



pollution prevention plan, 58–59t 

sections, 60t 


heat pump system, geothermal, 200t, 208t 

heliports, 106t, 117t, 124t 

high temperature/chilled water system 

HTCW utilities plan, 208–209t 

HVAC plan, 200–201t 

highways. See roads, streets, and highways 

hot water systems, heating, 202t 


HVAC (heating, ventilating, and air conditioning) plan, 199– 

204t 

hydraulic control systems, 206t 

I 

IAD. See Washington Dulles International Airport 

iMUSE (intelligent Multiple User System Equipment) 

system, 254t 

inch-pound text sizes and line type scales, 23–24t 

industrial waste piping, mechanical, 205t 

industrial waste water 



profiles 




X-sections 


inert gas, 185t 

insulating (transformer) oil system, 206t 

intelligent Multiple User System Equipment (iMUSE) 

system, 254t 

intercom/public address system, 223t 

interiors 


details, 181t 


floor patterns, 178–1798t 

furniture plan, 174–175t 



signage placement plan, 177t 

system furniture workstation plan, 176t 

irrigation 



landscape plan, 137t 

profiles 




X-sections 


J 

jacks, 234–234t 


joints 

structural buildings, 141t, 144t, 147t 


joists, 144t 

junction boxes, telephone/data plan, 235t 

K 

key plan, 56t 

kiosks, common use self service, 254–255t 

L 

labeling compact disks, 30 

laboratory gas piping, 194–195t 

landscape 


details, 138t 

irrigation plan, 137t 

landscape plan, 135–136t 




leader lines, 26 

levees 



profiles, civil drawings, 117–118t 


X-sections 


level/layer assignments (model files) 


Index


January 2010 

annotation, 27–28 

architectural, 163–172t 

aviation information systems, 253–2554t 

baggage handling system, 238–242t 

civil 



details, 129t 







profiles, 115–120t 





X-sections, 122–128t 

communications, 233–237t 

demolition, 28 

electrical 

airfield lighting plan, 229–230t 


details, 231t 




lighting plan, 218–219t 

power plan, 220–221t 

riser/one-line diagrams, 232t 

special systems plan, 222–224t 

electronic monitoring systems, 256–258t 

fire alarm, 189–192t 

fire protection, 182–188t 

general, 54–56t 

hazardous materials, 57–61t 

interiors, 173–181t 

landscape, 134t–138t 

mechanical 



details, 215t 




machine design, 211–212t 




model files, 27 

naming conventions, 27 

overview of, 27, 99–100 

plumbing, 193–197t 

public information systems, 249–252t 

security and access control systems, 243–248t 

sheet files, 28 


structural civil, 151–162t 

level/layer assignments (sheet files) 

annotation, 29 



baggage handling system, 279t 

civil, 264t 



electronic monitoring systems, 280t 



general, 260t 

geotechnical, 263t 



landscape, 265t 



public information systems, 278t 

security and access control systems, 277t 

structural, 266t 


life safety plan, 183–184t 

lighting 

airfield, 229–230t 

electrical utilities plan, 218–219t, 226t 


lightning protection, 225t 

lines 

color of, in graphics, 21, 21t 

leader, 26 

screened color, 22, 22t 

spacing of, in graphics, 26 

styles of, in graphics, 21, 21t 

width of, in graphics, 20–21, 20t 

liquid fuel 


profiles 




X-sections 


lubrication oil, 206t 

M 


makeup air system, 203t 

Master Clock system, 251t 

master units, 19 


mechanical drawings 




Index


January 2010 

details, 215t 











media format, 29–30 

medical/dental piping, 195t 

MicroStation (Bentley) 

colors, 21, 21t 


file accuracy and, 19 

global origin, 19 

requirements for, 13 

screened colors, 22t 

terminology interchangeable with AutoCAD, 15–16t 

mixed air system, 202–203t 

model files. See also level/layer assignments (model files) 

description of, 19–20, 27 

level/layer assignment tables, 52–53 

naming conventions, 33, 24e, 49–51t 

monitoring stations, 58–59t 

monitoring systems, energy monitoring control systems, 

223t. See also electronic monitoring systems 

monolithic flooring, 178t 

monotext font, 23 

motor control panels, 240t 

moving walks, 257–258t 

Multi-User Flight Information Display System (MUFIDS), 

250–251t 

N 

naming conventions 

addendum files, 36e 

drawing files, 33, 291–292 

level/layer assignment, 27 

model files, 33, 34e 

model files and level/layer tables, 49–51t 

sheet files, 33, 35e 

sketches, 33 

natural gas 



profiles 




X-sections 



north arrow, orientation of, 24–25 

nurse call/paging system, 223t 

O 

obstructions 


occupancy plan, 169t 

oil, lubrication, 206t 

one-line diagrams. See riser diagrams 

orientation of drawing, 24–25 

origin of drawing file, 17–18e, 19 

outline font, 23 

overrun areas 


profiles 


X-sections 


P 

PA system, 224t 

pads 


profiles 



X-sections 


paging system, 223t, 250t 

parking lots 


profiles 




X-sections 


pavement 





profiles 




X-sections 


penetrations 


plumbing piping plan, 195t 

specialty piping and equipment plan, 207t 

pipe/piping 

plumbing, 194–195t 

specialty mechanical, 205–207t 

Plan Sheets for IAD, 39e 

plants, for landscape, 135t 

platforms 




Index


January 2010 

plot size for drawings, 29 

plumbing 


details, 196t 



piping plan, 194–195t 



police ranges 


pollution areas, 59t 

pollution prevention plan, 58–59t 

power 

electrical plan, 220–221t 

electrical special systems plan, 223t 


presentation graphics, 20 

primary electrical cables 

electrical utilities plan, 227t 

process piping, 207t 

profiles 


project grid 

DCA, 18e 

IAD, 17e 

Project Identifier, 43t 

project organization, 13–14 

property 




X-sections 


proportional font, 23 

public address system, 224t 

public information systems 



plan, 250–252t 


Q 

Quality Check (QC) CADD checklist, 33 

R 

railroads 

profiles 



X-sections 


raw water piping, 207t 

reference files 

abbreviations, 283 


list of, 284 

use of, 28, 33 

reference outlines 



reflected ceiling plan, 166t 

refrigeration system, 203t 

reinforcement 


structural civil, 152–153t, 154t, 157–158t 

relief air system, 203t 

relocation, 240–241t 

resilient flooring, 178–1798t 

revisions to Design Manual, 5–6 

riprap and other permanent erosion control items. See also 

erosion and sediment control 





riser diagrams 






security and access control systems, 246–247t 

rivers 




profiles 



X-sections 


roads, streets, and highways 




X-sections 


Ronald Reagan Washington National Airport 

cover sheet for, 41e 

project grid, 18e 

Sheet Title Block, format for, 40e 

roof plan, 167t 

runways. See also taxiways 


profiles 


X-sections 


S 

safety features, structural civil, 154t, 158t 

sample points 

hazardous materials drawings, 59t 


Index


January 2010 

sanitary drainage piping, 195t 

sanitary sewer 



profiles 




X-sections 


SCADA (Supervisory Control & Date Acquisition), 257t 

screening of graphics, 22, 22t 

secondary electrical cables 


sections 





structural civil, 160–161t 

X-sections 


security and access control systems 


details, 248t 


electrical special systems plan, 223–224t 

riser diagrams, 246–247t 

security plan, 244–245t 


sewer. See sanitary sewer; storm sewer 

sheet files. See also level/layer assignments (sheet files) 

description of, 19–20, 28 

naming conventions, 33, 35e 

Sheet Title Block, format for 

DCA, 40e 

IAD, 37e 

shore bankline 


level/layer naming and descriptions, 80–83t 

signage system drawings, numbering and organization of, 

47t 

signs/signage 

placement plan, interiors, 177t 



site features 


profiles 



X-sections 


site improvement, landscape plan, 135–136t 

site information, general drawings, 56t 

site plan, civil, 63–73t 

sketches, addenda, 33 

slabs 


structural civil, 154–155t, 158t 

slanted font, 23 

smoke/pressurization control, 184t 

software, requirements for, 13 

sound system, 224t 

special systems 

electrical, 222–224t, 227t 

sprinkler system, 185–186t 

staging, 241t 

standards 

acceptable, 4–5 

CADD, 13 

drawing file, 19–20 

references, 284 

steam system, 203–204t 

stiffeners 



storage facilities, 59t 

storm drainage piping, 195t 

storm sewer 



profiles 





X-sections 


streets. See roads, streets, and highways 

structural buildings 

column plan, 146t 


details, 150t 

elevations, 147–148t 

foundation plan, 140–142t 

framing plan, 143–145t 





structural civil 

decks, 154–155t 

details, 162t 

elevations, 159–160t 

sections, 160–161t 


substructure, 151–153t 

superstructure, 156–158t 

styles of lines in graphics, 21, 21t 

submittal requirements for drawings, 30 

subunits, 19 

Supervisory Control & Date Acquisition (SCADA), 257t 

supports 


Index


January 2010 



symbols, CADD, 281 

system furniture workstation plan, 176t 

T 

target systems, 16 

taxiways. See also runways 


profiles 


X-sections 


telecommunications drawings, naming conventions for, 51t 

telephone/data plan, 234–235t 

temporary work, 241t 

terminators, 26 

terminology, interchangeable, between AutoCAD and 

MicroStation, 15–16t 

text height, on drawings, 23–24t 

three-dimensional files, 16 

tile flooring, 179t 

Title Block, format for 

DCA, 40e 

IAD, 37e 

topography 











transfer air system, 204t 


trusses 



TSA entities, 240t 

TV antenna system, 224t 

communication system plan, 228t 


utilities plan 


domestic water, 109–110t 

electrical, 226–227t 

HTCW, 208–209t 

industrial waste water, 111t 

irrigation, 111t 

liquid fuel, 110–111t 

natural gas, 111–112t 

sanitary sewer, 112–113t 

storm sewer, 113–114t 

V 

visual paging, 250t 

W 

walls 

floor plan, 165t 



Washington Dulles International Airport 

cover sheet for, 38e 

plan sheet for, 39e 

project grid, 17e 

Sheet Title Block, format for, 37e 

water supply and distribution, fire suppression plan, 186t 

water systems. See domestic water; high 

temperature/chilled water system; industrial waste 

water 

waterway specialties, 153t 

wetlands 


width of lines in graphics, 20–21, 20t 

windows, in floor plan, 165t 

wireless & radio system 


working units, 16 

workstation plan, 176t 

X 

X-sections for civil drawings, 54, 62-65t 

U 

underground ductbanks 


Index


January 2010 



Index


January 2010 

END OF DOCUMENT 


Index

CADD (2.24 MB) - Metropolitan Washington Airports Authority

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?