G2PU690VS20 Voltage monitoring in 3-phase mains ... - Tele Haase
G2PU690VS20 Voltage monitoring in 3-phase mains ... - Tele Haase
G2PU690VS20 Voltage monitoring in 3-phase mains ... - Tele Haase
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>G2PU690VS20</strong><br />
Functions<br />
Connections<br />
Under voltage <strong>monitor<strong>in</strong>g</strong> (UNDER, UNDER+SEQ)<br />
When the measured voltage (mean value of <strong>phase</strong>-to-<strong>phase</strong> voltages)<br />
falls below the value adjusted at the MIN-regulator, the set <strong>in</strong>terval of the<br />
tripp<strong>in</strong>g delay (DELAY) beg<strong>in</strong>s (red LED MIN flashes). After the <strong>in</strong>terval<br />
has expired (red LED MIN illum<strong>in</strong>ated), the output relays switches <strong>in</strong>to<br />
off-position (yellow LED not illum<strong>in</strong>ated). The output relays switches <strong>in</strong>to<br />
on-position aga<strong>in</strong> (yellow LED illum<strong>in</strong>ated), when the measured voltage<br />
exceeds the value adjusted at the MIN-regulator.<br />
The adjustable undervoltage threshold or the fixed asymmetry allow the<br />
detection of <strong>phase</strong> loss despite of reverse voltage.<br />
L3<br />
L1<br />
L2<br />
15<br />
25<br />
16 18<br />
26 28<br />
25 26 28<br />
15 16 18<br />
Dimensions<br />
Phase sequence <strong>monitor<strong>in</strong>g</strong> (SEQ)<br />
If a change <strong>in</strong> <strong>phase</strong> sequence is detected (red LED SEQ illum<strong>in</strong>ated),<br />
the output relays switch <strong>in</strong>to off-position immediately (yellow LED not<br />
illum<strong>in</strong>ated).<br />
LED U<br />
L1<br />
L2<br />
L3<br />
TELE <strong>Haase</strong> Steuergeräte Ges.m.b.H.<br />
Vorarlberger Allee 38<br />
A-1230 Wien<br />
RELEASE 2012/11<br />
Subject to alterations and errors<br />
www.tele-onl<strong>in</strong>e.com