Accessories for stoves and fireplace inserts - Jøtul stoves and ...

Electronic flame controllers
Dimensions in mm
Electronic flame controller
Electronic flame controllers (ERS) navigates the combustion process starting
from the ignition stage to finish with the extinction. Controller ERS 01 is
intended for navigating inserts and stoves. A set of combustion modes
dedicated for and adjusted to each and every model of stove and Jøtul’s
inserts makes it an outstanding feature of this product.
With the first activation of the product, the controller takes over all the
functions responsible for regulating the amount of air required to achieve and
maintain appropriate combustion conditions. Therefore in accordance with
the set mode, the controller ignites, maintains the temperature within
the values of ± 10 °C and extinguishes fire in the fireplace. Electronic flame
controller ERS informs the user about lack of fuel or too low temperature of
exhaust gases. It also alarms about fireplace’s overheating. When the burning
cycle is over, the choke valve is shut down in order to prevent the fireplace and
the accumulating mass HSS from cooling down.
Electronic flame controller ERS-1 for free standing stoves and Jøtul’s fireplace
inserts, remote control included
Electronic flame controller ERS-2 for Jøtul’s fireplace inserts with water
exchanger, remote control included
Index
SF55P11I010
SF55P11I011
13 13