Internal

More documents

Recommendations

Info

500 Natural timber ceiling and wall finishes. Parklex 500 is a timber panel manufactured from 100% natural timber fibres, pressed under high temperatures and impregnated with thermoset resins using our exclusive Gureprex system. Finish range (1) Panels manufactured from joined timber veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes). Ambar Antra Ayous Natural Bamboo (1) Black Cherry (1) Eucalyptus (1) Museum Ash (1) Grey Beech (1) Natural Beech (1) Green Beech (1) Maple (1) Walnut (1) Onix Natural Oak (1) Reconstituted Oak (1) Rubi Sapelli (1) Wengue (1) Natural Zebrano (1) Surface characteristics Panel construction Woodskin ® . A finish that allows you to feel the grain and subtlety of natural timber. Gureprex wear resistant overlay Natural timber veneer Resin bonded WBP plywood core HPL balancer Wood Acoustics Assembly systems * Slots Perforated Parklex 500 acoustic is designed for interior wall and ceiling finishes requiring high levels of acoustic absorption. It is machined in different forms and dimensions allowing for the desired level of acoustic performance. Exposed fastening. The Parklex panels are fastened with stainless steel screws or rivets to the treated wood or metal substructure. Hidden fastening, using adhesive. The Parklex panels are fastened using adhesive to the treated wood or metal substructure. Hidden fastening, with special hanging profiles. The Parklex panels are attached to the aluminum substructure, using guide profiles and hanging pins. Hidden fastening, with caps. The Parklex panels are attached with screws hidden by caps with a diameter of 10,75mm and a section of 2mm, using the same material and finish as the panel. * For more information on installation, consult the <strong>Internal</strong> Parklex Assembly Catalogue or our web page (www.parklex.com). Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.
Technical characteristics Tests Standard Property or attribute Measurement unit Result Thickness 8mm Parklex 500 VDS (Standard) Parklex 500 VDF (Fire Class) 1. Inspection requirements Rev: 03 (09.2009) Rev: 03 (09.2009) Colour, pattern and surface finish EN 438-8 Part 5.2.2.3 Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood 2. Dimensional tolerances Thickness (t) EN 438-2 Part 5 t = 6,0 mm +1,0 / -0,6 t = 8,0 +1,6 / -1 +1,0 / -0,7 t = 11,0 +1,4 / -1,1 +1,2 / -0,8 t = 14,0 +1,6 / -1,1 +1,3 / -0,9 t = 17,0 +1,3 / -1,3 +1,4 / -1,0 t = 20,0 +1,3 / -1,1 +1,6 / -1,2 t = 40,0 +2,0 / -1,6 Tolerance for thickness variations inside a panel EN 315:1993 t (nominal thickness) mm Length and width EN 438-2 Part 6 – mm Edge straightness EN 438-2 Part 7 – mm/m Edge squareness EN 438-2 Part 8 – mm/m ≤0,6 +10 / - 0 1,5 1,5 3. Physical properties Revolutions Resistance to surface wear EN 438-2 Part 10 Resistance to surface wear Initial wear point Wear resistance Resistance to inmersion in boiling water EN 438-2 Part 12 Aspect Rating Resistance to scratching EN 438-2 Part 25 Force Rating Lightfastness (xenon arc) EN 438-2 Part27 Contrast Grey scale rating Flexural strength EN 310 Longitudinal direction MPa Flexural modulus EN 310 Transversal direction Longitudinal direction MPa Transversal direction Perpendicular tensile strength ASTM C 297 Adhesion force MPa ≥ 50 ≥ 150 ≥ 4 ≥ 2 ≥ 4 < 4 (A) ≥ 70 ≥ 60 ≥ 7000 ≥ 6000 ≥ 2 Density - Density g/cm3 ≥ 0,75 ≥ 0,80 4. CE Safety requirements Resistance to fixings EN 438-7 Part 4.5 Force N/mm ≥ 200 ≥ 130 Bonding strength EN 438-7 Part 4.7 Bond strength MPa ≥ 1,42 ≥ 2,64 Flexural tensile strength EN 438-7 Part 4.8 Bond strength MPa ≥ 1,42 ≥ 2,64 Content of pentachlorophenol EN 438-7 Part 4.10 Content pentachlorophenol ppm ≤ 5 Release of formaldehyde EN 717-2 Release of formaldehyde Rating E1 Glue-line quality EN 438-7 Part 4.13.3 Expression of results Rating 5 3 Resistance to elevated temperature EN 438-7 Part 4.13.3 Aspect Result No damage Water resistance EN 438-7 Part 4.13.3 Thickness increase % ≤ 7 ≤ 2,5 (A) Maple; Bryna; Ayous Natural; Cherry; Natural Beech; Reconstituted Oak 5. CE Safety requirements - Reaction to fire Reaction to fire EN 13.501-1 Euroclass t ≥ 8mm Classification D-s3,d0 – Euroclass t ≥ 14mm Classification – B-s2,d0 Panel dimensions Length (grain direction) x width 2440 x 1220 mm Thickness* * Other thicknesses may be available upon request. 8, 11, 14, 17, 20 & 26 mm
Page 1 and 2: The durable, contemporary timber so
Page 3 and 4: Indoor wood coverings. The natural
Page 5 and 6: Quality at your feet. Recommended p
Page 7 and 8: Recommended products: · Walls and
Page 9 and 10: Recommended products: · Floors: 20
Page 11 and 12: Parklex Projects
Page 13 and 14: Navarran Government Press Room Pamp
Page 16 and 17: Cepa 21 Wineries Valladolid, Spain.
Page 18 and 19: Zubieta XXI Sports Complex Guipuzco
Page 20 and 21: La Perla Hotel Pamplona, Spain. Arc
Page 22 and 23: Attic in San Sebastian Guipuzcoa, S
Page 24 and 25: Air France, VIP Lounge Narita Inter
Page 26 and 27: Home in San Sebastian Guipuzcoa, Sp
Page 28 and 29: About Parklex Production process Na
Page 30: Parklex product guide Damp areas 70
Page 33: Technical characteristics Tests Sta
Page 37 and 38: Technical characteristics Tests Sta
Page 39 and 40: Technical characteristics Thickness
Page 41: Applications 1. 2. 3. 1. Semilcos h

Internal

Create successful ePaper yourself

Delete template?

Save as template?