LENGTH TRIM and CUT SAW - KONTRA Anlagentechnik GmbH

• simple, robust design
• compact transport and freight
• short duration of erection
• very precise cutting tolerances
• high availability
• small maintenance requirement
LENGTH TRIM and
CUT SAW

Application and Advantages
• for trimming and dividing of wooden boards
• useful for raw boards after press lines
in sanding and grading lines
in tongue and groove lines
• symmetrical or asymmetrical dividing of singular boards
The KONTRA Length Cut Saw is for use in line. The saw is
working from below and the tool change is also from below.
The simple, robust and self-contained machine system enables
short duration of erection and commissioning and small
maintenance requirement.
Together with other KONTRA products there are complete
production lines possible.
Product and Machine Data
Board thickness: approx.
Board width: up to approx.
Board length: min. approx.
Speed of
pinch roller feed: max.
Machine length: approx.
(single frame design)
approx.
(double frame design)
Machine width: approx. working width
(working width = max. board width)
Working height: min.
Machine height: approx. working height
3 - 50
3.200
1.200
100
1.200
2.200
+ 1.500
+ 1.600
+ 750
Installed power: dependent on product and number of aggregates
Extraction quantity: dependent on number of aggregates
Cutting tolerances: board width:
angle accuracy:
+ / - 1
1
mm
mm
mm
m/min
mm
mm
mm
mm
mm
mm
mm/m
Special and additional Accessories
• trim aggregates
• scorer units with frequency control
• frequency control for trim and saw aggregates
• motorised height adjustment for the top frame
• execution with double frame, dependant on cutting width
and number of aggregates
• execution as special trim saw
• board length min. approx. 975 mm, only possible without
scorer units and with double infeed pinch roller
• infeed and outfeed conveyor with guiding rails
• for larger board thickness and doubled boards
• Noise reduction cabine for noise level ≤ 85 dB(A)
Design Data
• Length cut saw designed as pinch roller saw
• strong base frame with machined saw beam
• saw beam fitted with precision guides and saw slides
• aggregates raised and lowered pneumatically
• aggregates with extraction hood and cutting plate
• motorised adjustment of aggregates via distance measuring system
• infeed / outfeed pinch roller with synchronous drive system
• strong top frame with installed extraction hoods,
including top pressure roller wheels for infeed and outfeed pinch roller
• adjustment of top extraction hoods automatically with adjustment of
aggregates
KONTRA Anlagentechnik GmbH • Hankerfeld 20 • D-59602 Rüthen
Tel.: + 49 (0) 2952 / 952 - 0 • Fax: + 49 (0) 2952 / 952 - 280
E-mail: vertrieb@kontra-handling.de • Internet: www.kontra-handling.de