Cross Cut Saw - KONTRA Anlagentechnik GmbH

• simple, robust design
• compact transport and freight
• short duration of erection
• very precise cutting tolerances
• high availability
• small maintenance requirement
NEW
with
CROSS CUT SAW
FEED MOTION by
PINCH ROLLER

Application and Advantages
• for dividing of wooden boards
• for board dividing in sanding and grading lines
• ideal application for standard board width (without centre cut),
board dividing into fix length
• symmetrical or asymmetrical dividing of singular boards
as well as dividing of mini books
The KONTRA Cross Cut Saw (pinch roller saw) is carried out
without complicated pusher systems.
The simple, robust and self-contained machine system
enables short duration of erection and commissioning and
small maintenance requirement.
Together with other KONTRA products there are complete
production lines possible.
Special and additonal Accessories
• trim aggregates
• scorer units with frequency control
• frequency control for trim and saw aggregates
• motorised height adjustment for the top frame
• Noise reduction cabine for noise level ≤ 85 dB(A)
Product and Machine Data
Board thickness /
mini book thickness: approx.
6 - 50 mm
Board width: min. 1.220 - max. approx. 3.200 mm
Board length:
Speed of
approx. 3.000 - 12.000 mm
pinch roller feed: max.
72 m/min
Machine length: approx.
1.830 mm
Machine width: approx. working width + 1.900 mm
Working height: min.
1.500 mm
Machine height: approx. working height + 1.000 mm
(working width up to 6.000 mm)
approx. working height + 1.700 mm
Installed power:
(working width up to 12.000 mm)
dependant on product and number of aggregates
Extraction quantity: dependant on number of aggregates
Cutting tolerances: board length:
+ / - 1 mm
angle accuracy:
1 mm/m
Design Data
• strong base frame in box type design with machined
saw beam
• saw beam fitted with precision guides and saw slides
• aggregates raised and lowered pneumatically
• aggregates with extraction hood and cutting plate
• motorised adjustment of aggregates via distance
measuring system
• infeed pinch roller and double outfeed pinch roller
with synchronous drive system
• strong top frame with installed extraction hoods,
including top pressure roller wheels for infeed and
outfeed pinch roller
• adjustment of top extraction hoods automatically
with adjustment of aggregates
KONTRA Anlagentechnik GmbH • Hankerfeld 20 • D-59602 Rüthen
Tel.: + 49 (0) 2952 / 952 - 0 • Fax: + 49 (0) 2952 / 952 - 280
E-mail: vertrieb@kontra-handling.de • Internet: www.kontra-handling.de