Trumpf TruTool N 700

More documents

Recommendations

Info

Designation of measured value Unit Value in accordance with EN 60745 Vibration emission value a h (vector sum of three directions) m/s 2 12 Uncertainty K for vibration emission value m/s 2 2.7 A-class acoustic pressure level L PA typically dB (A) 89 A-class acoustic power level L WA typically dB (A) 100 Uncertainty K for noise emission value dB 3 Tab. 2 10 Description 2010-06-09 E528_05
3. Setting work 3.1 Selecting a die CAUTION Vigorous upward and downward movements (hammering) due to unsuitable die. Excessive tool wear and increasing loads on the machine. ‣ Use dies with the greatest height possible (keep distance X, shown in the drawing below, as small as possible). 1 Die (see following table) W Workpiece 5 Punch guide X Distance between sheet surface and punch guide 9 Punch Fig. 16802 Depending on the thickness, tensile strength and type of the workpiece, one of the following types of die can be selected for the machining process: E528_05 2010-06-09 Setting work 11
Page 1: Operator's manual TruTool N 700 (1A
Page 4 and 5: 1. Safety 1.1 General safety inform
Page 6 and 7: 2. Description 1 Bow-handle (mounta
Page 8 and 9: 2.2 Technical data Other countries
Page 12 and 13: Material Type of die Type of die Ty
Page 14 and 15: 3.3 Setting the penetration depth N
Page 16 and 17: 1 Compact handle 3 Clamping lever 2
Page 18 and 19: 4. Operation 4.1 Working with the T
Page 20 and 21: 4.3 Nibbling with templates The fol
Page 22 and 23: 5.1 Replacing the tool Note When th
Page 24 and 25: 5.2 Regrinding the punch Notes •
Page 26 and 27: 6. Original accessories, wearing pa
Page 28: 7. Appendix: Guarantee, declaration

Trumpf TruTool N 700

Create successful ePaper yourself

Delete template?

Save as template?