Fidur Wear Protection - Kjellberg Finsterwalde

Filler Materials
Welding Electrodes
Filler materials for hard surfacing are used
to apply wear protection layers on existing
parts later on or to regenerate worn parts.
Electrode qualities
Fidur electrodes are suitable for surfacings that are exposed
to extreme abrasion and high temperatures.
Electrode
Composition of
the weld metal
Fidur
10/65
5 % C,
30 % Cr
Fidur
10/65V
5 % C,
22 % Cr,
7 % Nb
Fidur
10/65W
5 % C,
22 % Cr,
7 % Nb,
7 % Mo,
V, W
Hardness 60 HRC 62 HRC 65 HRC
Max operating
temperature
350 °C 350 °C 700 °C
Electrode dimensions
Diameter
Packaging
3.2 mm, 4 mm, 5 mm
5 kg, 6 kg (Cardboard
box)
Flux Cored Wire
For the processing of filler materials, Kjellberg
Finsterwalde’s welding technique can
be used optimally (welding power sources,
wire feeding units, welding torches, welding
gantries).
Flux cored wire qualities
Fidur flux cored wires are optimally suited for surfacings on
stationary plants.
Flux cored wire
Composition of
the weld metal
Fidur
10/65 FD
5 % C,
30 % Cr
Fidur
10/65V FD
5 % C,
22 % Cr,
7 % Nb
Fidur
10/65W FD
5 % C,
22 % Cr,
7 % Nb,
7 % Mo,
V, W
Hardness 60 HRC 62 HRC 65 HRC
Max operating
temperature
350 °C 350 °C 700 °C
Special qualities and dimensions are
developed individually according to
your requirements.
Flux cored wire dimensions
Diameter
1.6 mm,
2.4 mm
2.8 mm,
3.2 mm
Abpackung
15 kg mandrelmounting
reel
25 kg basket
coil
250 kg cask
- 6 -