Ammonium sulphate nitrate - BASF Asia Pacific

Field Grade Fertilisers
Field Grade Fertilisers
Ferro Top
TECHNICAL DATA
Primary Nutrients:
6.0% Nitrogen (N)
3.7% NH 4 Nitrogen
2.3% NH 2 Nitrogen
10.0% Potassium (K), water soluble
Secondary Nutrients:
3.6% Magnesium (Mg)
18.0% Sulphur (S)
8.0% Iron (Fe)
0.01% Manganese (Mn)
Physical properties:
Finely granulated fertiliser
Granulometry:
Min 90% 0.5-2.0 mm
Bulk Density:
Approx. 920 kg/m 3
Recommendations for application:
The fine and even granulation of Ferro Top allows it to be easily applied with spreaders or by hand.
The application of Ferro Top allows for even nutrient distribution, as every granule contains the same
macro and micro-nutrients.
Application of Ferro Top is possible during the whole vegetation period, but particularly
recommended to promote turf health for periods of upcoming stress such as frost, heat or fungal
disease.
Watering-in (minimum 5 mm) after application is strongly recommended.
The amount of Ferro Top applied will vary according to location of the turf, soil nutrient reserves and
seasonal influences such as wet conditions but the below rates are given as a guide. These
recommendations are given as a practical guide to good agronomic practice under most situations.
Local agronomic conditions should also be taken into account, as these may affect responsiveness
of fertiliser application.
Area kg/100m 2 g/m 2 Applications per year
Golf greens 2 - 4 20 - 40 2 - 4
Golf tees 2 - 4 20 - 40 2 - 4
Golf fairways 2.5 - 3.5 25 - 35 2 - 3
Sportfields/ 3 - 4 30 - 40 1 - 2
Ornamental turf
Colour:
Red brown
Storage Notes:
Ferro Top may absorb moisture if exposed to the atmosphere. Store in a dry place ensuring bags are
closed completely
A 25kg bag of Ferro Top contains
1.5 kg Nitrogen (N)
2.5 kg Potassium (K)
0.9 kg Magnesium (Mg)
2.0 kg Iron (Fe)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.