RC951E-4FEE1 Ethernet Demarcation Devices - DAVANTEL
RC951E-4FEE1 Ethernet Demarcation Devices - DAVANTEL
RC951E-4FEE1 Ethernet Demarcation Devices - DAVANTEL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Raisecom Technology Co., Ltd.<br />
<strong>RC951E</strong>-<strong>4FEE1</strong><br />
<strong>Ethernet</strong> <strong>Demarcation</strong> <strong>Devices</strong><br />
Raisecom <strong>RC951E</strong>-<strong>4FEE1</strong> is Raisecom's<br />
intelligent <strong>Ethernet</strong> <strong>Demarcation</strong> Device (EDD).<br />
The device is typically owned by carriers/service<br />
providers, but is working at the border of<br />
customer's network and carrier's network and<br />
provding a clear demarcation point between the<br />
two.<br />
<strong>RC951E</strong>-<strong>4FEE1</strong> offers 4 FE downlink ports and 1<br />
E1 uplink. Customized <strong>Ethernet</strong> service traffic will<br />
be transmitted over carrier owned PDH network<br />
to the <strong>Ethernet</strong> aggregator working at the POP<br />
site.<br />
Raisecom EDD is not only capable of doing<br />
what a layer-2 switch is capable of on <strong>Ethernet</strong><br />
switching, but is inherently good at network<br />
Feature<br />
Basic Feature<br />
EoPDH<br />
VCG<br />
Fault Pass Through<br />
E1 Frame Mode<br />
E1 Loopback<br />
Forwarding Mode<br />
MTU<br />
Flow Control<br />
Rate Limit<br />
Storm Control<br />
Link Aggregation<br />
Port Mirroring<br />
MAC Address Table<br />
VLAN<br />
QinQ<br />
Loopback Detection<br />
Cable Diagnostic<br />
4 FE over 1 E1, HDLC/GFP encapsulation, software configurable<br />
1 VCG with 1 E1 member<br />
VCG based<br />
Unframed or Framed<br />
Single E1 loopback test and loopback detection function<br />
Store-and-forward mode<br />
Buffer size:128KB<br />
1,632 Bytes<br />
IEEE 802.3x in full duplex mode<br />
Back pressure in half duplex mode<br />
Max rate limit:100,000Kbps<br />
Ingress rate limit per port with increments 64Kbps (64K-1M), 1Mbps (1-100M)<br />
Egress traffic shaping per port<br />
Broadcast/Multicast/Unicast DLF storm control<br />
Control mode: Global/bps<br />
Default value: 64Kbps<br />
4 groups, up to 4 ports in each group<br />
Mirrorings for egress & ingress ports<br />
8K MAC address<br />
Add/remove/search MAC address table entries<br />
View MAC address statistics<br />
MAC address aging time configurable:15-3,825s<br />
MAC address learning threshold per port<br />
Optional MAC address table limit per port:1-255<br />
4K active VLANs<br />
Port PVID Overwrite<br />
Port QinQ<br />
Individual port will be shut down if loopback is detected<br />
Support<br />
diagnostices as a device working on the border. With<br />
IEEE802.1ag, the network administrators from the<br />
carrier are provided with a tool of <strong>Ethernet</strong> debug.<br />
The device can be either deployed in a point to point<br />
topology, or in a point to multi-point topology as<br />
CPEs. HDLC/GFP encapsulation configurable makes<br />
<strong>RC951E</strong>-<strong>4FEE1</strong> be capable of working with both<br />
Raisecom RC953E series or RC959 series <strong>Ethernet</strong><br />
aggregators.<br />
Apart from local CLI management, <strong>RC951E</strong>-<strong>4FEE1</strong> is<br />
also available with inband web-based management,<br />
and can futhur be monitored in a centralized way on<br />
the GUI of Raisecom NView NNM system.<br />
Datasheet<br />
<strong>RC951E</strong>-<strong>4FEE1</strong><br />
Specifications<br />
Performance<br />
Capacity<br />
Number of<br />
Ports<br />
FE ports<br />
E1 ports<br />
Switching fabric 0.832~1Gbps<br />
32MB SDRAM<br />
8MB flash<br />
128KB Switch Buffer<br />
4 FE ports<br />
1 E1 port: both RJ-45 (for<br />
120Ω balanced interface) and<br />
BNC (for 75Ω unbalanced<br />
interface) are available<br />
1 CONSOLE ports<br />
10Base-T (RJ-45, Cat3/Cat4/<br />
Cat5 UTP)<br />
100Base-TX (RJ-45, Cat5<br />
UTP)<br />
MTU: 1632 Bytes<br />
Support auto-MDI/MDIX<br />
Bit Rate: 2.048Mbps<br />
Code: HDB3<br />
Port Type:<br />
120Ω balanced, RJ-45<br />
and 75Ω unbalaned, BNC<br />
Comply with ITU-T G.703,<br />
G.704, G.823<br />
CONSOLE port Port Type: RJ-45<br />
Indicators<br />
Dimensions<br />
Weight<br />
Power Supply<br />
Power<br />
Consumption<br />
PWR for power supply<br />
SYS for system operation<br />
LNK/ACT for FE port<br />
100M for FE port<br />
LOS for each E1/T1 port<br />
LAL for E1 local alarms<br />
RAL for E1 remote alarms<br />
44(H)x300(W)x135(D)mm<br />
≤1.2Kg<br />
AC: 220V<br />
DC: -48V<br />
≤10W (full load)<br />
Raisecom Technology Co., Ltd.<br />
Building 2, No.28 Shangdi 6th Street,<br />
Haidian District, Beijing 100085<br />
Tel: +86 10 8288 3305<br />
Fax: +86 10 8288 3056<br />
Email: export@raisecom.com<br />
http://www.raisecom.com<br />
@1999~2010 Raisecom Technology, Co., Ltd<br />
All trademarks are the property of their<br />
respective owners.<br />
Technical information is subject to change without<br />
notice.
Raisecom Technology Co., Ltd.<br />
Feature<br />
QoS<br />
4 queues per port<br />
CoS/DSCP/port-based<br />
Global queue scheduling<br />
Queue scheduling rule: SP/WRR<br />
WRR weight range:1-125<br />
SLA<br />
Layer-2/Layer-3 SLA<br />
Management Feature<br />
OAM<br />
IEEE802.3ah OAM (discovery, link performance monitor , remote loopback testing,<br />
remote failure indication)<br />
Extended OAM<br />
CFM IEEE802.1ag & Y.1731<br />
128 MEP & 128 MA supported<br />
KeepAlive Report Support<br />
Time Management<br />
DHCP<br />
RMON Group 1,2,3 & 9<br />
ACL<br />
Scheduling<br />
Ways of Management<br />
Routing Protocol<br />
Auto Configuration<br />
Cluster Management<br />
Software Upgrade<br />
Other Feature<br />
Error Tolerance<br />
Security<br />
Maintenance<br />
Password Recovery<br />
Timezone<br />
Time modification<br />
DST<br />
System time synchronization by SNTP Client<br />
NTP<br />
DHCP Client<br />
IP-based ACL<br />
System task scheduling<br />
CLI-based management through CONSOLE port or Telnet/SSH access<br />
Inband web-based management<br />
Inbuilt SNMP agent<br />
GUI-based concentratively management on Raisecom NView NNM system<br />
Static routing & default gateway<br />
Support<br />
RAISECOM Neighbor Discovery Protocol (RNDP)<br />
Xmodem/FTP upgrade in BOOTROM<br />
FTP/TFTP (system & configuration files)<br />
System error report<br />
Fast recovery during serious error<br />
Hardware voltage & temperature monitoring<br />
User classification & password protection<br />
RADIUS<br />
TACAS+<br />
Binding of MAC address & port<br />
Port Isolation<br />
PPPoE Agent<br />
Debug information output<br />
Port statistics<br />
Port dynamic statistics<br />
Support<br />
Specifications<br />
Power<br />
Consumption<br />
Working<br />
Ambience<br />
Storage<br />
Ambience<br />
≤10W (full load)<br />
Compliance<br />
Safety<br />
Compliance<br />
Standards<br />
Temperature: -5 ~ 55 degree<br />
centigrade<br />
Relative Humidity: ≤90% (no<br />
condensing)<br />
Temperature: -25 ~ 70 degree<br />
centigrade<br />
In the porcess of applying<br />
IEEE 802.1Q VLAN<br />
IEEE 802.3ad Link<br />
Aggregation<br />
IEEE 802.1ad QinQ<br />
IEEE 802.1p CoS Prioritization<br />
IEEE 802.3x Flow Control<br />
IEEE 802.3ah OAM<br />
IEEE 802.1ag Connectivity<br />
Fault Management<br />
ITU Y.1731 Services OAM<br />
Static Routing<br />
RMON I and II standards<br />
SNMP V1/V2c/V3<br />
ITU-T G.703, G.704, G.823,<br />
G.824<br />
Bellcore GR-499-CORE<br />
ANSI T1.403<br />
Raisecom Technology Co., Ltd.<br />
Building 2, No. 28th Shangdi 6th Street,<br />
Haidian District, Beijing 100085<br />
Tel: +86 10 8288 3305<br />
Fax: +86 10 8288 3056<br />
Email: export@raisecom.com<br />
http://www.raisecom.com<br />
@1999~2010 Raisecom Technology, Co., Ltd<br />
All trademarks are the property of their<br />
respective owners.<br />
Technical information is subject to change without<br />
notice.
Raisecom Technology Co., Ltd.<br />
Typical Application<br />
Ordering Information<br />
Part number<br />
<strong>RC951E</strong>-<strong>4FEE1</strong>-AC<br />
<strong>RC951E</strong>-<strong>4FEE1</strong>-DC<br />
Description<br />
Inteligent <strong>Ethernet</strong> <strong>Demarcation</strong> Device, 4 10/100M FE ports, 1 E1(RJ-45 for 120Ω balanced interface and BNC for 75Ω<br />
unbalanced interface) uplink, AC power supply<br />
Inteligent <strong>Ethernet</strong> <strong>Demarcation</strong> Device, 4 10/100M FE ports, 1 E1(RJ-45 for 120Ω balanced interface and BNC for 75Ω<br />
unbalanced interface) uplink, DC power supply<br />
Raisecom Technology Co., Ltd.<br />
Building 2, No. 28th Shangdi 6th Street<br />
Haidian District, Beijing 100085<br />
Tel: +86 10 8288 3305<br />
Fax: +86 10 8288 3056<br />
Email: export@raisecom.com<br />
http://www.raisecom.com<br />
@1999~2010 Raisecom Technology, Co., Ltd<br />
All trademarks are the property of their<br />
respective owners.<br />
Technical information is subject to change<br />
without notice.