Product Range VKF-i - LK Systems AB

Produktsortiment |
LK Manifold Cabinet, on the wall type (UTV)
LK Manifold Cabinet UTV is designed for mounting outside of the existing walls
with LK Manifold VKF-i. In the cabinets with a minimum stud-frame thickness
of 120 mm can LK Manifold (VKF-i) also be mounted together with LK Manifold
Shunt VS. In the cabinets with a minimum stud-frame thickness of 180 mm can LK
Manifold (VKF-i) be mounted together with LK Manifold Shunt CS or LK Heat
Exchanger Pack -10. See range table below.
The cabinets are made of 1 mm thick powder-lacquered metal plating and the
base of the cabinet is removable for convenient installtion. The back has adjustable
(height and side ways) ”rails” for the manifold. The hatch is delivered with a coin
lock and as accessory, a key lock is available.
Equipped with ”knock out holes” on the sides to enable that the supply and return
pipe can be installed from the side. If the supply- and return pipe are installed
through the knock out holes on the cabinet´s side, then VKF 7-8 can be installed in
cabinet INB 2-6.
Article no. W x H x D Size
VKF-i
Mnifol Shunt or H
Exchg.p. + VKF-i
Colour
code
241 78 91 595x780x120 mm 2-6 - RAL
9010
241 78 92 800x780x120 mm 2-12 VS+VKF-i 2-5 RAL
9010
241 80 79 1150x780x120 mm 2-12 VS+VKF-i 2-12 RAL
9010
241 86 88 800x780x180 mm 2-12 VS/CS+VKF-i 2-5 RAL
9010
241 86 89 1150x780x180 mm 2-12 VS/CS+VKF-i 2-12
H Exchg. p. 10
+VKF-i 2-12
RAL
9010
Weight Package
12 kg 1/18
15 kg 1/18
25 kg 1/10
16,5 kg 1/12
28 kg 1/8
LK Hatch
Installation hatch with frame to be mounted in the wall. The hatch has a coin lock,
as an accessory there is a key lock. The frame and hatch is made by 1 mm stove
enamelled steel plate. LK Hatch must be placed directly on the floor. The bottom
of the frame is adjustable in height.
Article no. W x H Size VKF-i Colour code Weight Package
241 81 14 540x760-800 mm VKF-i 2-6 RAL 9010 4.2 kg 1
241 81 15 800x760-800 mm VKF-i 2-12 RAL 9010 4.8 kg 1
241 81 16 1150x760-800 mm VKF-i 2-12 RAL 9010 7.5 kg 1
10