Sabreâ¢-SSB Brake Motors - Reliance Electric
Sabreâ¢-SSB Brake Motors - Reliance Electric
Sabreâ¢-SSB Brake Motors - Reliance Electric
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Sabre -<strong>SSB</strong> <strong>Brake</strong> <strong>Motors</strong><br />
Short Series <strong>Brake</strong><br />
1/4 - 5 HP<br />
3 - 25 Ft. Lbs.<br />
The <strong>Reliance</strong> ® Short Series <strong>Brake</strong> (<strong>SSB</strong>)<br />
motor is a revolutionary new design integrating<br />
the industry-proven DODGE ® DC brake<br />
with the <strong>Reliance</strong> Duty Master ® motor. This<br />
compact, spring-set design is magnetically<br />
released, direct acting, and designed for the<br />
stopping and positive holding of a driven<br />
load.<br />
Insulation<br />
Motor windings are Class F<br />
Centriseal insulated with 100%<br />
epoxy to seal out contamination.<br />
Enclosure<br />
All <strong>SSB</strong> brake motors are TEFC.<br />
Features<br />
DC Power<br />
<strong>Brake</strong> coil uses DC power for quiet<br />
operation (no hum) and soft<br />
engagement. DC rectifier is built-in<br />
with surge suppression circuit. DC<br />
coil eliminates the inrush current for<br />
prolonged contactor life.<br />
Service<br />
Short Series brakes operate at lower<br />
temperatures for higher cycle life<br />
between adjustments.<br />
Mounting<br />
<strong>SSB</strong> brake motors are foot or flange<br />
mounted and can be mounted both<br />
horizontally and vertically. The brake<br />
motors are up to 2-1/2" shorter than<br />
brake motors using C-face mounted<br />
brakes.<br />
Release Lever<br />
An external manual release lever is<br />
furnished for emergency<br />
disengagement when power is off.<br />
Fail-Safe<br />
Stopping and holding torque is<br />
applied if power is interrupted to<br />
provide a safe operating condition.<br />
Adjustment<br />
<strong>Brake</strong> has a simple visual adjustment<br />
with a feeler gauge.<br />
Quality<br />
<strong>Brake</strong> motors are built using ISO<br />
9001 quality standards.<br />
UL/CSA/CE<br />
<strong>Brake</strong> motors are component<br />
recognized by UL and CSA, and are<br />
CE marked.<br />
Connections<br />
<strong>Brake</strong> leads are internally routed to<br />
the motor conduit box for either<br />
connecting to the motor leads or for<br />
connecting separately. <strong>Brake</strong><br />
voltages can be different from the<br />
motor voltage if separately<br />
connected. Connection diagram is on<br />
the motor nameplate.
Dimensions<br />
Dimensions are in inches.<br />
FRAME C BV B 2F U AH BC<br />
FB56C 13.72 5.60 3.88 ---- .6250 2.06 .19<br />
FC56C 14.72 6.60 5.88 2.00 .6250 2.06 .19<br />
FD56C 15.78 7.66 5.88 2.00 .6250 2.06 .19<br />
FE56C 16.78 8.66 5.88 2.00 .6250 2.06 .19<br />
FB140TC 13.78 5.60 3.88 ---- .8750 2.12 .12<br />
FC140TC 14.78 6.60 5.88 2.00 .8750 2.12 .12<br />
FD140TC 15.84 7.66 5.88 2.00 .8750 2.12 .12<br />
FE140TC 16.84 8.66 5.88 2.00 .8750 2.12 .12<br />
FRAME C BV 2F B<br />
WD182TC 16.16 7.98 4.500 6.44<br />
WE184TC 17.16 8.98 5.500 6.44<br />
www.baldor.com www.ptplace.com www.dodge-pt.com www.reliance.com<br />
Baldor <strong>Electric</strong> Company Headquarters<br />
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.648.5792, Fax (1) 479.648.5792, International Fax (1) 479.648.5895<br />
Baldor - DODGE/<strong>Reliance</strong><br />
6040 Ponders Court, Greenville, SC 29615-4617 U.S.A., Ph: (1) 864.297.4800, FAX: (1) 864.281.2433<br />
4/07 Copyright © 2007 Baldor <strong>Electric</strong> Company All Rights Reserved. Printed in USA.<br />
This material is not intended to provide operational instructions. Appropriate instruction manuals and precautions<br />
should be studied prior to installation, operation or maintenance of equipment.<br />
RAPS-872
Change language