1-2-3 - TOOTHSHA.123 - American Tooth Industries

V - REACTIVITY INFORMATION
STABILITY
CONDITIONS TO AVOID
_XX_ STABLE UNSTABLE HEATING ABOVE 300C.
HAZARDOUS DECOMPOSITION PRODUCTS
N/A
HAZARDOUS POLYMERIZATION
CONDITIONS TO AVOID
___ MAY OCCUR
_XX_WILL NOT OCCUR.
INCOMPATIBILITY (MATERIALS TO AVOID)
WATER _XX___ OTHER Strong Oxidizing Products
SPILL OR LEAK PROCEDURE INFORMATION
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
SWEEP UP TO AVOID SLIPPING HAZARD.
WASTE DISPOSAL METHODS
DISPOSE OF IN A LANDFILL OR INCENERATE ACCORDING TO FEDERAL, STATE
AND LOCAL REGULATIONS.
VII - SPECIAL PROTECTION INFORMATION
VENTILATION TYPE
Local exhaust at processing equipment
RESPIRATORY PROTECTION
USE TYPE FOR PARTICULATES NOT OTHERWISE CLASSIFIED IF NEEDED.
PROTECTIVE GLOVES
Not Mandatory
OTHER PROTECTIVE EQUIPMENT
EYE PROTECTION
Safety Glasses
HIGH TEMPERATURE PROCESSING EQUIPMENT SHOULD BE VENTILATED
VIII - STORAGE AND HANDLING INFORMATION
STORAGE TEMPERATURE INDOOR HEATED REDRIGERATED OUTDOOR
Max. Room Temp Min Room Temp Keep indoors
STORE IN A COOL DRY PLACE
KEEP CONTAINER CLOSED TO AVOID WATER ABSORPTION AND CONTAMINATION
TOXICITY INFORMATION
NONE OF THE COMPONENTS OF THIS MATERIAL ARE LISTED BY IARC, NTP, OSHA OR ACIGH AS CARCINOGENS.
X - MISCELLANEOUS INFORMATION
Avoid inhalation of dust. Keep dust out of eyes to prevent possible irritation.
The information cointained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the
accuracy of this data or the results to be obtained from the use thereof. American Tooth Industries assumes no responsibility for personal
injury or property damage to vendees, users or third parties caused by this material. Such vendees or users assume all risks associated
with the use of the material.