CV Branislav Jeremic.pdf - Fakultet inženjerskih nauka Univerziteta ...

FACULTY OF MECHANICAL IN KRAGUJEVAC
UNIVERSITY IN KRAGUJEVAC
CURRICULUM VITAE
GENERAL INFORMATION
First and last name
Branislav Jeremić
Year and place of birth
28. 02. 1950. settlement: Donja Crnuća, community:
Gornji Milanovac
Position
Full professor
e-mail/web site
bane@kg.ac.yu
Telephone 034 330 640
Education-scientific / education –art field Technical technological science
University, faculty, organizational unit University in Kragujavac, Faculty of Mechanical
Engineering
Filed and closer specialty
Mechanical Engineering (Manufacturing Engineering
and Industrial Engineering)
EDUCATION – DIPLOMAS
BECHELOR STUDIES
Year 1. 10. 1968.-29. 06. 1973.
Place
Kragujevac
Institution
Faculty of Mechanical Engineering
Headline of BSC Optimization of Hunting Rifle Elements Processing
Field
Machine Processing
MSC THESIS
Year 1. 10. 1973.-29. 09. 1977.
Place
Kragujevac
Institution
Faculty of Mechanical Engineering
Title of MSC thesis Tribological processes in the Contact Zone of Tooling Machine Sliding
Guidelines
Field
Tribology
PHD THESIS
Year 13. 12. 1979.- 29. 06. 1987.
Place
Kragujevac
Institution
Faculty of Mechanical Engineering
Title of PHD thesis Contribution in examination of dynamical loading impact on friction
processes in tribo-mechanical systems.
Field
Tribology

Year
20.07.1973.-
31 .01 .1975.
1.02.1975.-
15.05.1979.
16.05.1979.-
18.02.1988.
19.02.1988. –
31 .03.1993.
27.03.1989.-
27.03.1994.
1.04.1993.-
1.02.1998.
TECHNICAL BIOGRAPHY – POSITIONS
Position
ZASTAVA WEAPON FACTORY – Engineer and the chief Production
engineer
Faculty of Mechanical Engineering in Kragujevac- Assistant aspirant
Faculty of Mechanical Engineering in Kragujevac - Assistant
Docent
ZASTAVA WEAPON FACTORY - Research Consultant in Development -
1/3 of full working hours
Faculty of Mechanical Engineering in Kragujevac – Associate professor
2.02.1998.- Faculty of Mechanical Engineering in Kragujevac – Full professor
PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
(training in the country and abroad, study courses, a visiting professor)
Year and duration
Scholarships - study abroad:
1975.-20 days INDMAŠ, Minsk, Byelorussia
1976.-20 days INDMAŠ, Minsk, Byelorussia
1979.-15 days INDMAŠ, Minsk, Byelorussia
1982.-20 days INDMAŠ, Minsk, Byelorussia
1985.-15 days, INDMAŠ, Minsk, Byelorussia
1987.-7 days INSTITUT MEHANIKI METALLOPOLIMERNIH SISTEM,
Gomelj, Byelorussia
1988.-7 days Center for hard coatings, BALZERS, Liechtenstein
1988.-45 days
Northwestern University, Center for Engineering Tribology,
Evanston, USA
1989.-10 days
INSTITUT MAŠINOVEDENIA IM. A. A., Blagonravova,
Moscow, Russia
1989.-7 days
Center for hard coatings, INTERATOM, Bergisch Gladbach
1, Germany
1989.-7 days Center for hard coatings, VAC TEC, Weiterstadt, Germany
1990.-20 days Northwestern University, Center for Engineering Tribology,
Evanston, USA
1991.-7 days INSTITUT MEHANIKI ETALLOPOLIMERNIH SISTEM,
Gomelj, Byelorussia
1991 .-15 days Northwestern University, Department of Mechanical and
Nuclear Engineering, Evanston, USA
1992.-15 days
Northwestern University, Center for Engineering Tribology,
Evanston, USA
1994.-15 days
Northwestern University, Center for Engineering Tribology,
Evanston, USA
1996.-15 days Northwestern University (Center for Engineering Tribology)
and College of DuPage (Manufacturing Technology),
Evanston and Glen Ellyn, USA,

Year
AWARDS AND RECOGNITIONS
Name of award/recognition
1986. Prize 22.decembar., ZASTAVA WEAPON FACTORY
1988. JNA Plaque – of Committee Secretariat for National Defense for achieved results in
the weapon and military equipment development and captivation.
1999. Inventor of the year – Degree with plaque consigned from the Union of Inventors
and Authors of Yugoslavian Technical Improvement
RESUTLS OF SCIENTIFIC AND RESEARCH WORK
CITATION INDEX OF SCIENTIFIC WORK (without auto-citation)
List of results - R11
Significant thesis books and monographs of international importance
No.
1.
List of results - R12
Scientific books and monographs of international importance
No
1.
List of results - R13
Scientific books and monographs of national importance
No
5
1. D. Adamović, B.Jeremić, M.Babić., Površinsko plastično deformisanje snopom kuglica, Yugoslav
Tribology Society,1995.
2. M.Knežević, M.Folić, J.Đurić, N.Ćakić ,S.Arsenijević, B.Jeremić., Dilatacija cervikalnog kanala
pneumatskim dilatatorom, Medical Faculty in Kragujevac, 1996.
3. B.Jeremić., Trobološki procesi pri dinamičkom opterećenju, Yugoslav Tribology Society, 1997.
4. S.Lazarević, S.Arsenijević, N.Ćakić, J.Đurić, A.Živanović, B.Jeremić, N.Arsenijević, V.Papić,
S.Đukić-Dejanović., Dilatacija mogućeg, Dilatation of possible, Clinical Hospital Center
Kragujevac, 2000.
5. B.Jeremić, P.Todorović., Kompleksna dijagnostika rotora, Faculty of Mechanical Engineering in
Kragujevac, 2007.
Textbooks
No
1
1. B.Jeremić., Terotehnologija-Tehnologija održavanja tehničkih sistema, Faculty of Mechanical
Engineering in Kragujevac, 1992.
List of results - R21
Chapter in the book; Review article
No
1.
NOTE: review article is printed work that handles a scientific problem with a critical review and author 's
contributing to this problem.

List of results - R22
Chapter in the book, Review article
No
1.
List of results - R23
Chapter in the book, Review article
No
1.
List of results - R31 – Technical solutions
No
1.
Be sure to mention: the authors of solutions, the name of technical solutions, for whom the solution is
developed, who uses a solution, the years when the solution was developed and who has accepted it
– applied
List of results - R32 – Technical solutions
No
5
1. B. Jeremić, M. Jekić, B. Srećković, M. Milošević, M.Petrović, V.Jovanović, M.Stefanović.,
Spiralna opruga doboša puškomitraljeza M72 B, Performed for the need of ZASTAVA WEAPON
FACTORY, Applied in exploitation in 1985.
2. B. Jeremić, S. Karalazić, M. Stefanović, M. Rančić, D. Maksimović, D.Milanović, V.Zarić.,
Tehnologija i oprema za izradu unutrašnje trase cevi kalibra 12.7 mm metodom protiskivanja,
Performed for the need of ZASTAVA WEAPON FACTORY, Applied in exploitation in 1986.
NOTE: This is already in exploitation for 22 years, and at the time being a new inner rifle tube
route is designed for one of the worlds best big caliber sniper rifles.
3. D. Milanović, B. Jeremić, R. Mališ, O. Kondić, J. Mališ., Izrada hladnim deformisanjem
elektrode za elektrootporno tačkasto zavarivanje, Performed for the need of ZASTAVA
WEAPON FACTORY, Applied in exploitation in 1987.
4. B.Jeremić, A.Janković, M.Babić, Ž.Đurđević,R.Tomić,B.Tadić, M.Lazić, S.Tanasijević., D.Ćatić,
S.Jovičić.,Servositem za upravljanje lakim i srednjim privrednim i dostavnim vozilima, Produced
by PPT ''Servoupravljači'', is used by Zastava Economy Vehicle Factory since 2000.
5. B.Jeremić, P.Todorović, Uređaj za merenje i monitoring sila kontrakcije muskulature poda
karlice- SPK1, Developed By Faculty of Mechanical Engineering in Kragujevac –
Terotechnology Center, and is used by Clinical Center in Kragujavec since 2007.
List of results - R33 – Technical solutions
No
6
1. B.Jeremić , Xonovanja cevi kalibra 20 mm sa samopodesivim pozicioniranjem , Performed for
the need of ZASTAVA WEAPON FACTORY, Applied in exploitation in 1977.
2. B.Jeremić, Visoko brzinsko brušenje ležišta metka, Performed for the need of ZASTAVA
WEAPON FACTORY, Applied in exploitation in 1982.
3. B.Jeremić, S.Tanasijević, D.Ninković., Probni sto za ispitivanje reduktora elevacije i pravca na
oklopnom transporteru, Performed for the need of ZASTAVA WEAPON FACTORY, Applied in
exploitation in 1983.
4. B.Jeremić,M.Rančić., Sistem za monitoring temperature municije, Performed for the need of
ZASTAVA WEAPON FACTORY, Applied in exploitation in 1986.
5. B.Jeremić, Tehnologija i oprema za optimalno čišćenje elemenata kolosečnog pribora,
Performed for the need of MINOS Factory–Gornji Milanovac, Applied in exploitation in 1998.
6. B.Jeremić, S. Arsovski, Z.Radojević, Z.Arsovski, S.Jeremić-Backović, D.Maksimović.,
Optimalno održavanje složenih proizvodnih sistema, Performed for the need of “PIK Takovo”
company- Gornji Milanovac, Applied in exploitation in 1998.

List of results - R34 – Technical solutions
No
1.
List of results - R41 - Patents
No
1.
List of results - R42 - Patents
No
1.
List of results - R51
Work in the leading journal of international importance.
No
1.
List of results - R52
The work in the journal of international importance.
1. B. Jeremić, M. Babić, Triboekonomičeskije aspekt nanesenija pokritija, Trenije i Iznos, Vol. 11,
No 1, pp. 160-164, 1990.
2. M. Babić, B. Jeremić, Frikcionie harakteristiki TiN-pokritij, polučajemih metodami fizičeskovo
osaždenija v vakuume, Trenije i Iznos, Vol. 11, No 4, pp. 703-708, 1990.
3. M. Babić, B. Jeremić, M. Meyer., Tribologičeskoje povedenije tverdosmazočnih pokritij, Trenije
i Iznos, Vol. 16, No 2, pp. 284-286, 1995.
4. M. Babić, B. Jeremić, N. Milić, Comaparasion of contemporary PVD coatings tribological
characteristics, Journal of the Balkan Tribological Association, Vol. 1, No. 1, pp. 27-34,
Bulgarian-English Academic, Publishing House, Sofia, 1995.,
5. B. Vasiljević, B. Jeremic, M. Babic, Laser method sensitivity as a function of contact surfaces
microgeometry parameters, Journal of the Balkan Tribological Association, Vol. 1, No. 4,pp.
319-325, Bulgarian-English Academic, Publishing House, Sofia, 1995.,
6. B. Jeremić, M. Babić, M. Meyer, P. Todorović, N. Milić, Tribomechanic systems diagnostics
through the friction process stability, Journal of the Balkan Tribological Association, Vol. 3, No.
1, pp. 21-28, Bulgarian-English Academic, Publishing House, Sofia, 1997.,
7. D.Vidojević, B.Jeremić., Developing Business And User Measurement of the System
Availability.,
No
7
List of results - R53
Lecture per call to international conference (completely published)
No

List of results - 54
Paper presented on conference with international importance (published)
1. B. Jeremić, R. Milić, Optimum concentracion of mineral oil in cutting fluid, Second
International Conference - Lubrication Challenges in Metahvorking and processing, Chicago
(USA), pp. 67-72, June 27-29.1979.
2. B. Jeremić, K vaprosu izučenija razvitija tribologičeskih procesov v napravljajušćih skolženija
metalorežušćih stankov, INTERTRIBO '81, 27-29 April 1981, pp. 169-176, Visoke Tatre,
Czechoslovakia.
3. B. Jeremić, M. Lazić, Tribological Characteristics of Cutting Fluids (Emulsions and Solutions)
- Application of Thin Layer Activation, 3rd International Colloquium, January 12-14, 1982.
Technishe Akademie Esslingen, BRD.
4. B. Jeremić, The influence of dynamic loading and vibrations on the conditions of contact
establishment, INTERTRIBO'84, 3-5 October 1984., Visoke Tatre, Čehoslovačka.
5. A. Šapar, Ju. V. Skorinin, N. T. Minčenja, B. Jeremić, Metodi i sredstva ocenki smazočnih
materijalov v tribosaprjaženijah, Naučno-tehničeskaja konferencija "Put povišenija
tehničeskovo urovnja i nadjožnosti mašin", Minsk, 20-21. October 1986., SSSR
6. B. Jeremić, A. Šapar, Oil film forming at small sliding velocities, INTERTRIBO '84, 27-29.
April 1987., pp. 47-54, Visoke Tatre, Czechoslovakia
7. B. Jeremić, Influence of lubricant upon level of dynamic load in contact zone at low sliding
velocity, Simpozijum "TRIBOTECHNOLOGY IN THEORY AND PRACTICE" Karlovi Vary, pp.
72-78,17-19.X.1 989, Czechoslovakia
8. B. Jeremić, S. Karalazić, D. Antonijević, Lubricant and dissipation of energy with ring springs,
ICED 90, pp. 1465-1472, Dubrovnik, August 1990.
9. B. Jeremić, Contact at external dynamic load of a tribomechanical system, Japan,
International Tribology Conference, Nagoya, October 1990.
10. B. Jeremić, Tribological balance of dynamiccally loaded tribomechanical system, 4th
Symposium INTERTRIBO'90, strane 107-110, May, 1990, High Tatras, Czechoslovakia
11. B. Jeremić, M. Babić, N. Milić, Influence of conditions of contact achieving upon tribological
behaviour of solid lubricants, 5th International Symposium INTERTRIBO '93, Proceedings,
Vol. 2, pp. 45-50., Bratislava, Slovak Republic, 1993.
12. M. Babić, B. Jeremić, N. Milić, PVD tribological coatings on construction heat-treated
steels,5 th International Symposium INTERTRIBO '93, Proceedings,Vol. 3., pp. 130-
134.,Bratislava, Slovak Republic, 1993.
13. S. Arsovski, M. Babić, B. Jeremić, N. Milić, Simulation model for application of contact layers
modification procedurs, First Balkan Conference on Tribology BALKANTRIB '93,
Proceedings, Vol. 1., pp. 90-96., Sofia, Bulgaria, 1993.
14. M. Babić, B. Jeremić, N. Milić, Specificities of friction and wear testing on tribometers, VI th
International Symposium INTERTRIBO '96, Proceedings, pp. 353-356, Stara Lesna -
Tatranska Lomnica, The High Tatras, Slovak Republic, 1996.
15. N. Milić, B. Jeremić, M. Babić, Condition diagnostics of machining center's main transmission
gearbox through wear particles, VI th International Svmposium INTERTRIBO '96,
Proceedings, pp. 369-372, Stara Lesna - Tatranska Lomnica, The High Tatras, Slovak
Republic, 1996.
16. M. Babić, B. Jeremić, N. Milić, Tribological properties of ground surfaces, 2nd International
Conference on Tribology BALKANTRIB '96, Proceedings, Part 1, Tribology in manufacturing
processes, Abrasive processes, pp. 151-158, Editor: K.-D. Bouzakis, Thessaloniki, Greece,
1996.
17. N. Milić, B. Jeremić, M. Babić, Condition diagnostics of machining center spindlehead, 2nd
International Conference on Tribology BALKANTRIB '96, Proceedings, Part 7, Tribometry and
Tribodiagnostics, pp. 819-826, Editor: K.-D. Bouzakis, Thessaloniki, Greece, 1996.
18. S. Veinović, D. Radonjić, B. Jeremić, R. Pesić, M. Stanojević, Z. Gradjin, The role of tribology
in quality improvements of the automative engines, 2nd International Conference on Tribology
BALKANTRIB '96, Proceedings, pp. 485-492, Editor: K.-D. Bouzakis, Thessaloniki, Greece,
1996.
19. B. Jeremić, M. Meyer, M. Babić, N. Milić, Tribodiagnostics of Destruction Processes of the
TiN Coating, Wear of Engineering Materials, Materials Solutions '97, Proceedings,
Indianapolis, Indiana, USA, 1997.
20. Tools for Metal Powder Pressing, Wear of Engineering Materials, Materials Solutions '97,
Proceedings, Indianapolis, Indiana, USA, 1997.
21. M. Babić, B. Jeremić, B. Vasiljević., Application of advanced measuring system in tribometry,
Broj
27

Tribologija 92, Proceeding pp. 192-1 97. Sofija, Bugarska, 2002.
22. V. Koković, P. Todorović, B. Jeremić, Trobologys Contribution to Rolling Bearings
Maintenance, Proceedings of 5-th international conference on tribology BALCANTRIB ’05, pp.
382-385, Kragujevac, 15.-18. June 2005.
23. V. Koković, P. Todorović, B. Jeremić, Modern Aproach to Rolling Bearing Service Life
Prediction, Proceedings of 5-th international conference on tribology BALCANTRIB ’05, pp.
386-398, Kragujevac, 15.-18. June 2005.
24. V. Koković, B. Jeremić, Using Ultrasound to Evaluate Internal Corrosion on Steel Gas
Papeline, Proceedings of 5th International Conference, Research and Development in
Mechanical Industry, RaDMI 2005, 04 - 07. September 2005, Proceeding, pp. 340-344,
25. P. Todorović, B. Jeremić, B. Ivković, B. Tadić, I. Mačužić, Data Acquisition System for
Trobometar TPD-2000, 2nd International Conference on Manufacturing Engineering ICMEN,
5 – 7 October 2005., Kallithea of Chalkidiki, Greece, Proceeding, pp. 553-562.
26. V. Koković, P. Todorović, B. Jeremić, Tribological Failure in Rolling Bearings, 2nd
International Conference on Manufacturing Engineering ICMEN, 5 – 7 October 2005.,
Kallithea of Chalkidiki, Greece, Proceeding, pp. 563-568.
27. Mačužić, B. Jeremić, P. Todorović, On-site Oil Analysiss and Purification in Proactive
Maintenance, 2nd International Conference on Manufacturing Engineering ICMEN, 5 – 7
October 2005., Kallithea of Chalkidiki, Greece, Proceeding, pp. 623-629.
List of results - R61
Broj
40
1. B. Jeremić, J. Popović, D. Lukić, Uticaj vrste i kvaliteta sredstava za hlađenje i odvođenje
strugotine na proizvodnost, potrošnju alata i kvalitet obrađene površine pri unutrašnjem
glačanju, Fuels and Lubrications. year XIV, No. 3., pp. 23-31.
2. B. Jeremić, Tribološki procesi na kliznim vođicama alatnih mašina i zavisnosti od vrste
materijala i ulja za podmazivanje, Tribology in Industry, No. 2, pp. 20-25, Avgust 1979.
3. B. Jeremić, Habanje kliznih vođica alatnih mašina, Fuels and Lubrications, 18 (2), pp. 79-87
(1979.)
4. B. Jeremić, R. Milić, D. Radovanović, Izbor optimalnog sredstva za hlađenje i podmazivanje
sa tribološkog i ekonomskog aspekta, Fuels and Lubrications 20 (1) pp.3-10 (1981).
5. S. Karalazić, B. Jeremić, Tribo-mehanički sistem u obradi dubokim bušenjem, Tribology in
Industry, No 3, pp. 68-75, September 1982.
6. B. Jeremić, Samopodmazujući materijali za ležišta, Tribology in Industry, No 1, pp. 23-25,
March 1983.
7. B. Jeremić, Oplemenjivanje kontaktnih površina trenja, Tribology in Industry, No 3, pp. 84-87,
October 1983.
8. B. Jeremić, Uticaj dinamičkih sila na razvoj triboloških procesa, Tribology in Industry. No 4, pp.
121 -1 25, December 1983.
9. B. Jeremić, Uticaj dinamičkog opterećenja i vibracija na uslove ostvarivanja kontakta,
Tribology in Industry. No 3, pp. 69-73, November 1984.
10. B. Jeremić, Savremeni nivo saznanja o mehanizmu oksidacionog habanja i pravci daljeg
istraživanja, Tribology in Industry. No 1, pp. 23-25, May 1984.
11. B. Jeremić, V. A. Šapar, Beskontaktno merenje debljine uljnog filma, Tribology in Industry. No
2, pp. 51-53, June 1986.
12. B. Jeremić, Proces trenja pri dinamičkom opterećenju tribomehaničkog sistema (I deo),
Tribology in Industry. No 2, pp. 40-45, June 1987.
13. B. Jeremić, Proces trenja pri dinamičkom opterećenju tribomehaničkog sistema (II deo),
Tribology in Industry. No 3, pp. 76-81, September 1987.
14. B. Jeremić, Potreba za eksperimentalnim istraživanjem triboloških karakteristika prevlaka,
Tribology in Industry. No, year X, br 1, pp. 3-4, March 1988.
15. N. Milić, B. Jeremić, M. Mejer, Neki rezultati uporednih ispitivanja oplemenjenih kontaktnih
slojeva, Tribology in Industry., year X, No 2, pp. 37-46, June 1988.
16. B. Jeremić, Osvrt na tribološka istraživanja u SAD, Tribology in Industry. year X, No 4, pp. 99-
100, December 1988.
17. M. Babić, B. Jeremić, Tribološka istraživanja u Institutu mehanike metalopolimernih sistema
Akademije nauka Beloruske SSR, Tribology in Industry, year XI, No 2, pp. 35-36, June 1989.

18. B. Jeremić, N. Milić, M. Babić, M. Majer: Uticaj geometrije kontakta na proces razaranja
čvrstog maziva, Tribology in Industry, year XIII, No 1, pp. 5-11, March 1991.
19. M. Babić, B. Jeremić, N. Milić, Mogućnost primene PVD prevlaka na konstrukcijskim čelicima,
Tribology in Industry, year XV, No. 1., Faculty of Mechanical Engineering in Kragujevac, 1993.,
pp. 22.-26.
20. B. Jeremić, M. Babić, N. Milić, B. Vasiljević, Tribološke karakteristike regenerisanih površina,
Tribology in Industry, year XV, No 3., Faculty of Mechanical Engineering in Kragujevac, 1993,
pp. 89.-93.,
21. D. Adamović, M. Babić, B. Jeremić, Uticaj bombardovanja površine snopom čeličnih kuglica
na parametre hrapavosti, Tribology in Industry, year XVI, No. 2., Faculty of Mechanical
Engineering in Kragujevac, 1994., pp. 52.-56.
22. B. Jeremić, Z. Radojević, S. Backović-Jeremić, N. Milić, Izbor kriterijuma za ocenu nivoa
tehnologije održavanja, Tribology in Industry, year XVI, No. 2., Faculty of Mechanical
Engineering in Kragujevac, 1994., pp. 57.-60.
23. S. Arsovski, M. Babić, B. Jeremić, B. Vasiljević, Simulation Model for Application of Contact
Layers Modification Procedures, Tribology in Industry, year XVI, No. 3., Faculty of Mechanical
Engineering in Kragujevac, 1994., pp. 94.-98.
24. D. Adamovic, B. Jeremic, D. Grujovic, Shot peening of alloyed steels used for vital parts of
weapons and devices, Journal for Technology of Plasticity, Vol. 19, Number 1-2, Faculty of
Technical Sciences, Institute for Production Engineering, Novi Sad, 1994, pp. 17-28.
25. B. Jeremić, M. Babić, M. Meyer, P. Todorović, N. Milić, PVD coatings and Dynamic Processes
in The Conatct Zone, Tribology in Industry, year XVII, No. 4., pp. 111.-115., Faculty of
Mechanical Engineering in Kragujevac, 1995
26. N. Milić, B. Jeremić, M. Babić, Dinamičko ponašanje glavnih vretena obradnih centara,
Tribology in Industry, year XVII, No. 4., pp. 127.-132., Faculty of Mechanical Engineering in
Kragujevac, 1995.
27. M. Babić, D. Adamović, B. Jeremić, N. Milić, Tribological Characteristics of Surfaces
Machined by Shot Peening, Tribology in industry, Vol. 18, N° 3 (E), Journal of Yugoslav
Tribology Society, University of Kragujevac, Mechanical Engineering Faculty, pp. 87-91,
Kragujevac, 1996.
28. B. Jeremić, M. Meyer, M. Babic, N. Milic, Tribodiagnostics of Destruction Processes of theTiN
coating, Tribology in Yugoslavia, Monograph, pp. 85-96, Yugoslav Society for Tribology, Editor:
Prof. dr Miroslav Babic, Kragujevac, 1997.
29. B. Jeremić, N. Milić, Terotechnology and system effectiveness, International journal of
INDUSTRIAL SYSTEMS, pp. 105-112, Publisher: Institute of industrial systems, Novi Sad,
Yugoslavia, 1999.
30. S. Arsenijević, B. Jeremić, N. Ćakić, J. Đurić, M. Knežević, A. Živanović, M. Brkić, Dilatacija
cervikalnog kanala pneumatskim dilatatorom, Journal MEDICUS, vol. 1, N o 1, pp.24-27, July
2000.
31. B. Jeremić, Savremeni pristup kod dizajniranja sistema održavanja, časopis TEHNIKA 4/5, str.
17-21, Izdavač: Savez inženjera i tehničara Jugoslavije, 2000.
32. B. Jeremić, Coefficient of dynamic behavior as the diagnostic parameter of the TiN coating
condition, Tribology in industry, vol. 22, Journal of Yugoslav Tribology Society, University of
Kragujevac, Mechanical Engineering Faculty, pp. 28-34, Kragujevac, November 2000.
33. B. Jeremić, P. Todorović, I. Mačužić, Tribological Processes in Contact Zone of Oil Seal and
Speedi-Sleeve, Tribology in industry, Volume 24, No. 1&2, pp. 3-10, Kragujevac, 2002.
34. I. Mačužić, B. Jeremić, Modern Approach to Problems of Transformer Oil Purification,
Tribology in industry, Volume 24, No. 3&4, Kragujevac, 2002.
35. I.Čitaković, M.Folić, B.Jeremić., Bophysical Processes during Fetal Vacuum Extraction and
Angular Traction Effects., Journal MEDICUS, vol. 4, No1, pp.8-12, April 2003.
36. 36. I. Mačužić, B. Jeremić, Proactive Approach to Oil Maintenance Strategy, Tribology in
industry, VOLUME 26, No 3 & 4, December 2004.
37. K.Parezanović-Ilić, M.Jevtić, S.Arsenijević, B.Jeremić, T.Zečević-Luković., A Model for
Ojective Measurement of Pelvic Floor Muscle Strenght in Women., Journal MEDICUS, , vol. 7,
No1, pp.9-14, April 2006.
38. D.Vidojević, B.Jeremić., Aspekti eksploatacijske raspoloživosti IT sistema, journal KVALITET,
year XVI, No 11-12, pp. 56-59, 2006.
39. B.Tadić, B.Jeremić, D.Tadić, P.Stančić., Naknadna korekcija vrednosti složenog tehničkog
sistema., journal RAČUNOVODSTVO., year LI, No.3-4, march-april 2007.
40. D.Vidojević, B.Jeremić., Planiranje eksploatacijske raspoloživosti složenih i distribuiranih
tehničkih sistema ., journal KVALITET, year XVII, No. 3-4, pp. 38-41, 2007.

List of results R62
No
The work in the journal of national importance
5
1. S. Zahar, M. Lazić, B. Jeremić, Otpori rezanja pri obradi čelika Č. 7422, Obrada metala i
tribologija, br.1, strane 41-58, Faculty of Mechanical Engineering in Kragujevac, April 1974.
2. .Palunčić, B. Jeremić, Uticaj stanja termičke obrade Č. 7422 na veličinu faktora sabijanja
strugotine u obradi struganjem, Metal processing and tribology, No. 2, pp. 77-85, Faculty of
Mechanical Engineering in Kragujevac, September 1974.
3. B. Jeremić, Z. Palunčić, Tribološka istraživanja na vođicama i kotrljajnim ležištima alatnih
mašina, Metal processing and tribology, No. 8, pp. 65-83, Faculty of Mechanical Engineering
in Kragujevac, May 1977.
4. B. Jeremić, Tribološke karakteristike sredstava za hlađenje i podmazivanje pri obradi
bušenjem, Metal processing and tribology, No. 10, pp. 14-33, Faculty of Mechanical
Engineering in Kragujevac, December 1977.
5. B. Jeremić, Komparativna analiza biofizike procesa dilatacije cervikalnog kanala.,
Gynecologic publication magazine, pp. 11-15,Vol 1, No 3-4, December 2000.
1.
List of results R63
Scientific critics and polemics
No
List of results - R64
No
Introductory lecture on the conference of national importance.
1
1. B. Jeremić, Tehnička dijagnostika u profitno orijentisanom održavanju, Maintenance
Conference KOD – 2003, Herceg Novi, 29.-31.10.2003.
NOTE: The National conference is a scientific meeting organized by national association.
Organizational and programming committee must be set within the eminent scientific workers from a
set of selected fields, manual of abstracts or papers
List of results - R65
No
Of Paper presented on national conference
65
1. B. Jeremić, Uticaj vrste termičke obrade na obradivost čelika pri čeonom glodanju, X
Counseling of Yugoslav Manufacturing Enginereeng, Beograd, 9-10. October 1975.
2. B. Jeremić, Z. Palunčić, B. Srećković, Neki rezultati dobijeni određivanjem koeficijenta
sabijanja strugotine pri obradi čelika Č. 7422 struganjem, Scientific reunion MMA'76 Novi
Sad, pp.139-150,14-15. October 1976.
3. B. Jeremić, Uticaj režima eksploatacije na razvoj triboloških procesa kod kliznih vođica
alatnih mašina, XIII Counseling of Yugoslav Manufacturing Enginereeng, Banja Luka, 6-8.
june 1979.
4. S. Arsovski, B. Jeremić, Prilog istraživanju uticaja stepena automatizacije alatnih mašina na
vrednost održavanja, XVII Counseling of Yugoslav Manufacturing Enginereeng, Titograd,
1983.
5. B. Jeremić, S. Arsovski, Intenzitet pojave otkaza kod alatnih mašina u funkciji stepena
automatizacije, XVII Counseling of Yugoslav Manufacturing Enginereeng, Titograd, 1983.
6. B. Jeremić, S. Karalazić, M. Stefanović, Razvoj tehnologije i opreme za izradu unutrašnje
trase cevi protiskivanjem, XX Counseling of Yugoslav Manufacturing Enginereeng, Beograd,
strane 187-1 90, May 1986.
7. B. Jeremić, S. Karalazić, Izrada unutrašnje trase cevi elektrohemijskim postupkom sa
pokretnom katodom, XXII Counseling of Yugoslav Manufacturing Enginereeng, Collection of
papers, pp. 375-383, Ohrid, 1989.
8. S. Karalazić, B. Jeremić, Uticaj prevlaka TiZrN i TiN na eksploatacijske karakteristike glodala
za rezanje navoja, YUTRIB 89, Collection of papers, pp. 159-161, Kragujevac, September
1989.
9. B. Jeremić, S. Arsovski, N. Milić, B. Tadić, Produkti habanja kao dijagnostički parametar
nivoa pouzdanosti fleksibilnih tehnoloških sistema, 5 th Symposium , "Tehnička dijagnostika i
pouzdanost", Collection of papers, pp.17-20, Rovinj, November 1989.

10. S. Arsovski, B. Jeremić, N. Milić, Tehnička dijagnostika kao uslov za povećanje pouzdanosti i
produktivnosti fleksibilnih tehnoloških sistema (FTS), 5 th Symposium "Tehnička dijagnostika i
pouzdanost", Collection of papers, pp.5-8, Rovinj, November 1989.
11. B. Jeremić, S. Karalazić, D. Antonijević, Rasipanje energije kod prstenatih opruga YUTRIB
89, Collection of papers, pp. 87-91, Kragujevac, September 1989.
12. B. Jeremić, M. Babić, B. Vasiljević, N. Milić, Uticaj uslova ostvarivanja kontakta na tribološko
ponašanje čvrstih maziva, YUTRIB'91, pp. 43-46, Kragujevac, September 1991.
13. B. Vasiljević, M. Babić, B. Jeremić, N. Milić, M, Majer, Primena savremenih mernih lanaca u
tribometrijskim istraživanjima, YUTRIB'91, pp. 47-50, Kragujevac, September 1991.
14. M. Babić, M. Meyer, B. Vasiljević, S. Karalazić, B. Jeremić, N. Milić, Tribološke karakteristike
tvrdih prevlaka na konstruktivnim čelicima, YUTRIB'91, pp. 279-282, Kragujevac, September
1991.
15. B. Tadić, B. Jeremić, N. Milić, Tribo-ekonomski pokazatelji pouzdanosti elemenata pri
postepenom otkazu tehničkih sistema, YUTRIB'91, pp. 327-332, Kragujevac,
September,1991.
16. N. Milić, B. Jeremić, M. Babić, B. Vasiljević, Dijagnostički parametri obradnih centara,
YUTRIB'91, pp.333-338, Kragujevac, September 1991.
17. S. Arsovski, B. Jeremić, M. Babić, Z. Đorđević: Revitalizacija proizvodnih procesa sa aspekta
povećanja produktivnosti fleksibilnosti i kvaliteta, 24. Counseling of Yugoslav Manufacturing
Enginereeng, Collection of papers, pp.33-38, N. Sad, September 1992.
18. D. Adamović, M. Jovanović, B. Jeremić, O. Stojanović, Prilog oceni postojanosti elektroda za
tačkasto zavarivanje, 24 Counseling of Yugoslav Manufacturing Enginereeng, Collection of
papers, pp.139-148, Novi Sad, September 1992.
19. M. Babić, B. Jeremić, N. Milić, Tribo-ekonomski efekti prevlaka čvrstih maziva, International
Councseling YUNG 4P '95, Collection of papers, P4 156, Appliance of gas oil derivates, pp.
202.-2 10., Yugoslav Oil & Gas Association, Vrnjačka Banja, 1995.
20. N. Milić, B. Jeremić, M. Babić, Rezonantno oscilovanje glavnog vretena obradnog centra,
Scientific-expert Reunion "Istraživanje i razvoj mašinskih sistema i elemenata", IRMES '95,
Collection of papers, Book 2, pp. 148.-153., Niš, 1995.
21. B. Jeremić, M. Babić, P. Todorović, N. Milić, Dijagnostika uslova ostvarivanja kontakta kod
tribomehaničkih sistema preko njihovog oscilatornog ponašanja, Scientific-expert Reunion
"Istraživanje i razvoj mašinskih sistema i elemenata", IRMES '95, Collection of papers, book
2, pp. 122.-128., Niš, 1995
22. B. Jeremić, Tehnička dijagnostika sa aspekta efektivnosti proizvodne opreme, 10.
International Conference of INDUSTRIAL SYSTEMS, Collection of papers, Book III, pp. 167.-
174., Institute for industrial systems of Faculty of Technical Science, Novi Sad, 1996.
23. N. Milić, B. Jeremić, M. Babić, Dominantni otkazi obradnih centara u procesu eksploatacije,
26. Counseling of Yugoslav Manufacturing Enginereeng SPMJ'96, Collection of papers, A.
Manufacturing Technologies, Maintenanc, A79., pp. 483.-488., Faculty of Mechanical
Engineering – University of Montengro, Podgorica - Budva, 1996.
24. B. Jeremić, Tehnička dijagnostika i preventivno održavanje, XXII May meeting of Equipment
Maintainers of Yugoslavia, Novi Sad, 7.-9. May, 1997.,pp. 13.-18.
25. N. Milić, B. Jeremić, P. Todorović, I. Mačužić, Dijagnostika alatnih mašina, XXII May meeting
of Equipment Maintainers of Yugoslavia, Novi Sad, 7.-9. May, 1997., pp. 25.-30
26. P. Todorović, B. Jeremić, N. Milić, I. Mačužić, Dijagnostika zupčastih pumpi, XXII May
meeting of Equipment Maintainers of Yugoslavia, Novi Sad, 7.-9. May, 1997, pp. 31.-36.
27. I. Mačužić, B. Jeremić, N. Milić, P. Todorović, Buka kao dijagnostički parametar, XXII May
meeting of Equipment Maintainers of Yugoslavia, Novi Sad, 7.-9. May, 1997, pp. 37.-42.
28. S. Arsovski, Z. Arsovski, B. Jeremić, D. Rutić, Ocena efikasnosti sistema održavanja, XXII
May meeting of Equipment Maintainers of Yugoslavia, Novi Sad, 7.-9. May 1997., pp. 141 .-
146.
29. B. Jeremić, A. Zbiljić, D. Timotijević, Praktična obuka kadrova i efikasnost održavanja, XXII
May meeting of Equipment Maintainers of Yugoslavia, Novi Sad, 7.-9. May, 1997., pp.147.-
151.
30. Z. Arsovski, S. Arsovski, B. Jeremić, D. Rutić, Informacioni sistem za upravljanje
održavanjem - iskustva u razvoju i uvođenju, XXII May meeting of Equipment Maintainers of
Yugoslavia, Novi Sad, 7.-9. May 1997., pp.171.-176.
31. P. Todorović, B. Jeremić, S. Tošić, M. Đonović, I. Mačužić, N. Milić, Prilagođavanje
postojećeg merača protoka savremenoj akviziciji podataka, Collection of papers XXIII May
meeting of Equipment Maintainers of Yugoslavia, Kragujevac, May 1998., Book 1, pp. 141-
147

32. P. Todorović, B. Jeremić, N. Milić, I. Mačužić, M. Đonović, N. Milić, Sistematski pristup
dijagnostici zupčastih pumpi, Zbornik radova XXIII May meeting of Equipment Maintainers of
Yugoslavia, Kragujevac, May 1998., Book 1, pp. 153-159 za merenje i analizu buke u
komunalnoj sredini, Collection of papers XXIII May meeting of Equipment Maintainers of
Yugoslavia, maj 1998., Book 1, pp. 179-185
33. M. Lukić, B. Jeremić, M. Đonović, Pregled istorijskog razvoja hidrauličkih elemenata i
sistema, Collection of papers XXIII May meeting of Equipment Maintainers of Yugoslavia,
Yugoslav Maintenance Organization, Kragujevac, May 1998., Book 2, pp. 375-381
34. I. Mačužić, B. Jeremić, N. Milić, P. Todorović, M. Đonović, Koncept proaktivnog održavanja
hidrauličkih sistema, Collection of papers of XXIII ay meeting of Equipment Maintainers of
Yugoslavia, Kragujevac, May 1998., Book 2, pp. 407-413
35. B. Jeremić, M. Lazić, D. Timotijević, Savremene tendencije u obuci kadrova za održavanje,
Collection of papers of XXIII ay meeting of Equipment Maintainers of Yugoslavia,
Kragujevac, May 1998., Book 2, pp. 797-805
36. S. Veinović, B. Jeremić, R. Pešić, Budućnost održavanja u svetlu S+3E
(sirovine+energija+ekologija+ekonomija), Collection of papers XXIII ay meeting of Equipment
Maintainers of Yugoslavia, Kragujevac, May 1998., Book 2, pp. 823-829
37. I. Mačužić, B. Jeremić, P. Todorović, N. Milić, Sistematski pristup dijagnostici elemenata
servo i proporcionalne hidraulike, Collection of papers of XXIV ay meeting of Equipment
Maintainers of Yugoslavia, Herceg Novi, June 2000., Book 1, pp. 123-129
38. J. Antić, P. Todorović, B. Jeremić, Dijagnostika stanja jednostepenog klipnog kompresora,
Collection of papers of XXIV May meeting of Equipment Maintainers of Yugoslavia, Herceg
Novi, June 2000., Book 1, pp. 311-317
39. M. Lukić, B. Jeremić, M. Đonović, Osnovne termodinamičke metode za dijagnostiku
elemenata hidrauličkih sistema, Collection of papers of XXIV May meeting of Equipment
Maintainers of Yugoslavia, Herceg Novi, June 2000., Book 1, pp. 341-347
40. N. Milić, B. Jeremić, P. Todorović, I. Mačužić, Sistematski pristup dijagnostici stanja
kotrljajnih ležajeva, Collection of papers of XXIV May meeting of Equipment Maintainers of
Yugoslavia, Heceg Novi, June 2000., Book 1, pp. 347-353
41. P. Todorović, I. Mačužić, B. Jeremić, Razvoj sistema za akviziciju podataka u oblasti
tehničke dijagnostike i njegova primena, Collection of papers XXIV May meeting of
Equipment Maintainers of Yugoslavia, Herceg Novi, June 2000., Book 1, pp. 379-355
42. B. Jeremić, P. Todorović, I. Mačužić, Dijagnostika stanja rotornog bagera, International
Advising, Dunav Preving, Preventive Engineering and insurances of Motor vehicles, working
machines, transport devices, systems and equipment, Beograd , December 2000. pp. 222-
227
43. B. Jeremić, I. Mačužić, K. Mačužić, Ž. Rvović, Postupak ispitivanja vatrogasnih vozila za
spasavanje sa visina, International Advising, Dunav Preving, Preventive Engineering and
insurances of Motor vehicles, working machines, transport devices, systems and equipment,
Beograd, December 2000., pp. 302-306
44. B. Jeremić, Dizajniranje sistema održavanja sa aspekta potreba strateških grana
jugoslovenske privrede, Collection of papersof 25. May meeting of Equipment Maintainers of
Yugoslavia, Beograd, May 2001., pp. 141-150
45. B. Jeremić, I. Mačužić, P. Todorović, Sofisticirana dijagnostika oscilatornog ponašanja
opreme u proizvodnji električne energije, 26. May meeting of Equipment Maintainers of
Yugoslavia, Technical Systems Maintenance, Collection of papers, Novi Sad, 22.-24. May
2002., pp. 123-128
46. P. Todorović, B. Jeremić, I. Mačužić, Vibrodijagnostika turboagregata, 26. May meeting of
Equipment Maintainers of Yugoslavia, Technical Systems Maintenance, Collection of papers,
Novi Sad, 22.-24. May 2002. 2002., pp. 129-134
47. I. Mačužić, B. Jeremić, P. Todorović, Razvoj uređaja za prečišćavanje transformatorskih ulja,
26 May meeting of Equipment Maintainers of Yugoslavia., Technical Systems Maintenance,
Collection of papers, Novi Sad, 22.-24. May 2002. 2002., pp. 225-230
48. B. Jeremić, I. Mačužić, P. Todorović, Sofisticirano praćenje promene stanja složenih
tehničkih sistema, 12. Scientific-expert Conference INDUSTRIAL SYSTEMS IS 2002,
Collection of papers, Vrnjačka Banja22.-23. November 2002., pp. 281-286
49. D. Vidojević, B. Jeremić, Kriterijumi redizajna sistema održavanja u proizvodnji boja i lakova,
Conference of Maintenance KOD – 2003, Collection of papers, Herceg Novi, 29.-31
.10.2003., pp. 179-1 85
50. D. Vidojević, B. Jeremić, Upravljanje procesom održavanja u sertifikovanim sistemima,
Quality Festival 2004., 31. Annual Conference JUSK-a, Collection of papers, Kragujevac, 4.-

6. May 2004., pp. III- 141-147
51. B. Jeremić, N. Petrović, I. Mačužić, P. Todorović, Kompleksna dijagnostika u održavanju
tehničkih sistema visoke raspoloživosti i gotovosti, IRMES 04, Collection of papers,
Kragujevac, 16.-17. September 2004., pp. 535-540
52. P. Todorović, B. Jeremić, I. Mačužić, Vibrodijagnostika turbokompresora, IRMES 04,
Collection of papers, Kragujevac, 16.-17. September 2004. pp. 573-578
53. I. Mačužić, B. Jeremić, P. Todorović, Razvoj savremenih uređaja za proaktivno održavanje
hidrauličkih sistema, IRMES 04, Collection of papers, Kragujevac, 16.-17. September 2004.,
pp. 579-584
54. V. Koković, B. Jeremić, Vibracije kotljajnih ležaja, IRMES 04, Collection of papers,
Kragujevac, 16.-17. September 2004., pp. 471-476
55. P. Todorović, B. Jeremić, I. Mačužić, Određivanje sopstvenih učestanosti oscilovanja noseće
betonske strukture turboagregata, 19. International Conference of NOISE AND VIBRATION,
Niš, 14.-15 October 2004.
56. V. Koković, B. Jeremić, Komparativna analiza modela za dijagnostiku kotrljajnih ležaja
praćenjem vibracija, 19. Conference of NOISE AND VIBRATION, Niš, 14.-15. October 2004.
57. B. Jeremić, I. Mačužić, P. Todorović, Dijagnostika preko oscilatornog ponašanja u strategiji
održavanjatermoenergetskih postrojenja, 19. Conference of NOISE AND VIBRATION, Niš,
14.-15. October 2004.
58. I. Mačužić, B. Jeremić, P. Todorović, Razvoj sistema za merenje i analizu buke u komunalnoj
sredini, 19. Conference of NOISE AND VIBRATION, Niš, 14.-15. October 2004.
59. B. Jeremić, D. Gačević, M. Koruga, I. Mačužić., Kompleksna dijagnostika u strategiji
održavanja TE "Pljevlja"., Symposium ELEKTRANE 2004, Collection of papers is recorded on
CD-u, V.Banja, November 2-5, 2004.
60. I. Mačužić, B. Jeremić, P. Todorović, Integracija sistema za kontrolu kontaminacije,
prečišćavanje i regeneraciju industrijskih ulja, XIII Scientific-expert Conference INDUSTRIAL
SYSTEMS IS 2005, 07.-09. September 2005., Collection of papers, pp. 597-604.
61. P. Todorović, B. Jeremić, I. Mačužić, Kritička analiza metoda balansiranja rotaconih mašina
,XIII Scientific-expert Conference INDUSTRIAL SYSTEMS IS 2005, 07.-09. September 2005.,
Zbornik radova, str. 605-615.
62. B. Jeremić, Održavanje tehničkih sistema u funkciji energetske efikasnosti, XIII Scientificexpert
Conference INDUSTRIAL SYSTEMS IS 2005, 07.-09. September 2005., Collection of
papers, pp. 549-556.
63. P. Todorović, B. Jeremić, I. Mačužić, Pregled metoda balansiranja rotacionih mašina, 31.
Manufacturing Engineering Advising with International participation, Kragujevac 19.-21. 9.
2006., Collection of papers, pp. 573-582
64. V. Koković, B. Jeremić, I. Mačužić, P. Todorović, Termički uzrokovana vibraciona
nestabilnost ventilatora dimnih gasova, XX International Conference of NOISE AND
VIBRATION, Tara 11-13. 10. 2006., Paper is recorded on CD, ID 20-27
65. B. Jeremić, I. Mačužić, P. Todorović, Strategija održavanja tehničkih sistema i kvalitet radnog
mesta i radne okoline, Paper is recorded on CD., ISBN: 86-86663-09-5., Kragujevac, 34.
National Quality Conference, 08.-11.May 2007.
List of results R71
Opening lecture at the conference of international importance published in the statement
1.
No
List of results - R72
No
Paper presented on international conference published in a statement
9
1. 1. B. Jeremić, I. Mačužić, N. Milić, P. Todorović, Tribodiagnostics of the solid lubricant
layerdestruction, 5th International Conference on Tribology YUTRIB '97, Proceedings of the
extended abstracts, Section: Monitoring and Maintenance of Tribomechanical Systems, E.4,
pp. 169-170, Yugoslav Tribology Society, Kopaonik, 1997.
2. P. Todorović, B. Jeremić, N. Milić, I. Mačužić, Complex approach to the gear pumps
diagnostics, 5th International Conference on Tribology YUTRIB '97, Proceedings of the
extended abstracts, Section: Monitoring and Maintenance of Tribomechanical Systems, E.1 1,
pp. 167-168, Yugoslav Tribology Society, Kopaonik, 1997.
3. B. Jeremić, R. Nastić, N. Milić, P. Todorović, I. Mačužić, Application of the technical
diagnostics in the development and design phase of the vane pump, 5th International
Conference on Tribology YUTRIB '97, Proceedings of the extended abstracts, Section:

Monitoring and Maintenance of Tribomechanical Systems, E.3, pp. 167-168, Yugoslav
Tribology Society, Kopaonik, 1997.
4. N. Milić, B. Jeremić, M. Babić, B. Nedeljković, System approach to the ball bearings
diagnostics, 5th International Conference on Tribology YUTRIB '97, Proceedings of the
extended abstracts, Section: Monitoring and Maintenance of Tribomechanical Systems, E.8,
pp. 177-178, Yugoslav Tribology Society, Kopaonik, 1997.
5. S. Đekić, B. Jeremić, D. Veličković, Zavisnost mikrogeometrijskih karakteristika površina
obrađenih brušenjem bez šiljaka od uslova obrade, 5th International Conference on Tribology
YUTRIB '97, Proceedings of the extended abstracts, Section: Tribology of Manufacturing
Processes, E.ll, pp. 27-28, Yugoslav Tribology Society, Kopaonik, 1997.
6. B. Jeremić, N. Milić, P. Todorović, I. Mačužić, Diagnostics of tribo-mechanical systems by
coefficient of dynamic behaviour, World Tribology Congress, Abstracts of papers, pp. 611
,The Tribology Group of the Institution of Mechanical Engineers (IMechE), Mechanical
Engineering Publications Limited, London, 1997.
7. N. Milić, B. Jeremić, M. Babić, Condition monitoring of the machining center, World Tribology
Congress, Abstracts of papers, pp. 617, The Tribology Group of the Institution of Mechanical
Engineers (I MechE), Mechanical Engineering Publications Limited, London, 1997.
8. S. Arsenijević, B. Jeremić, N. Ćakić, J. Đurić, M. Knežević, A. Živanović, M. Brkić, Cervical
canal dilatation with pneumatic dilator, Abstracts of papers, XVI Figo World Congress of
Gynecology and Obstetrics, Washington,D.C.,USA, September 2000.,pp 112-113
9. S. Arsenijević, B. Jeremić, N. Ćakić, Hydraulic Dilatation in the Gynecology, Abstracts of
papers, International Society of Computer Aided Surgery, IV Symposium, 23.-26 March,
2002, Naples, Italy.
List of results - R73
No
Paper presented on national conference published in a statement
21
1. M. Babić, B. Jeremić, M. Majer, N. Milić, Tribološko ponašanje prevlaka tvrdih maziva, XXIV
Yugoslav Scientific-expert Symposium JUGOMA'90, Opatija, October 1990.
2. B. Jeremić, M. Babić, N. Milić, M. Majer, Razaranje čvrstog mazivog sloja, XXIV Yugoslav
Scientific-expert Symposium JUGOMA '90, Opatija, October 1990.
3. Z. Luković, B. Jeremić, R. Isailović, Savremeni koncept mašine za hermetičko pakovanje sa
termoformiranjem, Symposium SAVROPAK '91, Beograd, December, 1991.
4. B. Jeremić, R. Isailović, Z. Luković, Savremeni koncept mašine za automatsko pakovanje
tečnosti u kartonsku ambalažu, Symposium SAVROPAK '91, Beograd, December 1991.
5. N. Milić, B. Jeremić, M. Babić, S. Arsovski, Dijagnostika glavnog vretena obradnog
centra,Third Yugoslav Tribology Conference YUTRIB '93, (Paper Abstract is presented in
"Tribologija u industriji" journal year XV, No. 2., 1993., pp. 57.)
6. S. Arsovski, B. Jeremić, M. Babić, N. Milić, Modeliranje ponašanja modifikovanih elemenata
tribomehaničkih sistema mašina alatki, Third Yugoslav Tribology Conference YUTRIB '93,
(Paper Abstract is presented in "Tribologija u industriji" journal year XV, No. 2., 1993., pp. 54.)
7. M. Babić, B. Jeremić, N. Milić, Frikciona svojstva triboloških prevlaka u funkciji normalnog
opterećenja i brzine klizanja, Third Yugoslav Tribology Conference YUTRIB '93, (Rezime rada
je objavljen u časopisu "Tribologija u industriji", God. XV, br. 2., 1993., str. 44.)
8. B. Jeremić, Z. Radojević, S. Backović - Jeremić, N. Milić, Izbor kriterijuma za ocenu nivoa
tehnologije održavanja, Third Yugoslav Tribology Conference YUTRIB '93, (Paper Abstract is
presented in "Tribologija u industriji" journal year XV, No. 2., 1993., pp.55.)
9. B. Jeremić, M. Babić, N. Milić, S. Arsovski, Tribološke karakteristike regenerisanih površina,
Third Yugoslav Tribology Conference YUTRIB '93, (Paper Abstract is presented in "Tribologija
u industriji" journal year XV, No. 2., 1993., pp. 54.)
10. B. Jeremić, B. Vasiljević, M. Babić, N. Milić, P. Todorović, Spektar snage u analizi topografije
kontaktnih površina, Fourth International Yugoslav Tribology Conference YUTRIB '95,
Collection of extended abstracts, Section A1: Fundamental friction and wearing aspects pp.
13.-14., Herceg Novi, 1995.
11. M. Babić, B. Nedeljković, N. Milić, B. Jeremić, B. Jordović, Obradivost i otpornost na habanje
odlivaka od sivog liva u funkciji strukturnih karakteristika, Fourth International Yugoslav
Tribology Conference YUTRIB '95, Collection of extended abstracts, Section D15: Tribology of
Processing Systems, pp. 157.-158., Herceg Novi, 1995.
12. B. Jeremić, Z. Radojević, S. Backović-Jeremić, N. Milić, Terotehnologija i standardi JUS ISO
9000, Fourth International Yugoslav Tribology Conference YUTRIB '95, Collection of extended
abstracts, Section El: Diagnostic and maintenance of tribo-technical systems, pp. 189.-190.,

Herceg Novi, 1995.
13. S. Arsovski, Z. Arsovski, B. Jeremić, Troškovi održavanja - pokazatelj kvaliteta procesa
održavanja, Fourth International Yugoslav Tribology Conference YUTRIB '95, Collection of
extended abstracts, Section El: Diagnostic and maintenance of tribo-technical systems, pp.
195.-196., Herceg Novi, 1995.
14. Z. Arsovski, S. Arsovski, B. Jeremić, Informacioni sistemi u održavanju kao elementi podrške
seriji standarda JUS ISO 9000, Fourth International Yugoslav Tribology Conference YUTRIB
'95, Collection of extended abstracts, Section El: Diagnostic and maintenance of tribotechnical
systems, pp. 191 .-192., Herceg Novi, 1995.
15. B. Jeremić, M. Babić, M. Majer, P. Todorović, N. Milić, PVD prevlake i dinamički procesi u
zoni kontakta, Fourth International Yugoslav Tribology Conference YUTRIB '95, Collection of
extended abstracts, Section B7: Materials and Coatings, pp. 49.-50.,Herceg Novi, 1995.
16. M. Babić, D. Adamović, B. Jeremić, N. Milić, Tribološke karakteristike površina
bombardovanih čeličnim kuglicama, Fourth International Yugoslav Tribology Conference
YUTRIB '95, Collection of extended abstracts, Section D10: Tribology of Processing Systems
pp. 147.-148., Herceg Novi, 1995.
17. N. Milić, B. Jeremić, M. Babić, Dinamičko ponašanje glavnih vretena obradnih centara,
Fourth International Yugoslav Tribology Conference YUTRIB '95, Collection of extended
abstracts, Section D18: Tribology of Processing Systems pp.163.-164.,Herceg Novi, 1995.
18. B. Jeremić, P. Todorović, I. Mačužić, Tehnička dijagnostika u funkciji racionalnog korišćenja
energetskih resursa, Conference of Maintenance “KOD-2005”, Bar 27-30.06. 2005., Collection
of Abstracts pp. 22, Entire paper is recorded on CD
19. I. Mačužić, B. Jeremić, P. Todorović, Proaktivno održavanje u funkciji racionalnije potrošnje
industrijskih ulja, Conference of Maintenance “KOD-2005”, Bar 27-30.06. 2005., Collection of
Abstracts pp. 55, Entire paper is recorded on CD
20. P. Todorović, I. Mačužić, B. Jeremić, Rešenje problema atipičnog oscilatornog ponašanja
glavnog vretena CNC struga, Conference of Maintenance “KOD-2005”, Bar 27-30.06. 2005.,
Collection of Abstracts pp. 67, Entire paper is recorded on CD
21. B. Jeremić, Z. Čolović, P. Todorović, V. Aničić, V. Šestović, V. Koković, Uticaj
vibromehaničkog stanja pogonskih jedinica za pogon transportera na zdravlje i komfor
operatera, Conference of Maintenance “KOD-2006”, Tivat 27-30.06. 2006., Collection of
Abstracts pp. 67, Entire paper is recorded on CD u
PARTICIPATION IN PROJECTS FINANCED BY GOVERENMTN DEPARTMANTS
List of projects
1. Development of inner tube route for small caliber rifles by suppression method. Participators:
Regional community for science of the region Sumadija and Pomoravlje and ZASTAVA
WEAPON Factory, 1983-1 985, project manager - Branislav Jeremić.
2. Researching of procedures and equipment designing of inner tube route for small caliber rifles
with electrochemical procedure with movable cathode. Participators: Regional community for
science of the region Sumadija and Pomoravlje and ZASTAVA WEAPON Factory, 1986-
1988. Project manager - Branislav Jeremić.
3. Improvement of technological level of current production equipment in metal-processing
Indystry. (Z.6.0026). Participators: Fund for technological development MNT RS and
ZASTAVA Factory, 1991-1993, Project manager -Branislav Jeremić.
4. Development of procedures for modification and regeneration of contact zones of the
elements of machinery systems and tribological information system. (Evidence Number -
1112). Participant: MNT RS (Fund for Scinece), 1990-1995., Project manager - Miroslav
Babić
5. Designing and manufacturing of automatic machines for alimentary liquids packaging within
cardboard packages (Z.6.0014). Participators: Fund for technological development MNT RS
and D.D. ESKOD, 1991-1993. Project manager -Branislav Jeremić.
6. Implementation of production technique development and technologies in metal -industry,
wood-processing industry and processed industry. MNT RS ,ev. No. S. 5. 03. 67. 298., PP6 –
Improvement of production equipment efficiency in alimentary industry 1994 - 1997., Project
manager -Branislav Jeremić.
7. Development of dilatation systems in Medicine, MNT RS, ev. No. I.3.2079,1999-2000. Project
manager – Slobodan Arsenijević
8. Development and conquering of equipment elements and technologies for car and aircraft
industry with applying modern calculation methods, designing methods and theory of
No
11

eliability. MNT RS, ev. No. S.5.33.71 .0110., 1998-2000. Project manager Branislav Jeremić.
9. MNT RS, ev. No. S.5.33.71 .0110., PP6 – Servo-system development and manufacturing for
light and medium economy vehicles steering, 1998-2000. Project manager -Branislav
Jeremić.
10. Energy saving through tribology, ev. No.11M01E1., Participators: MNT RS (Fund for
Science), 1996-2000., Project manager - Miroslav Babić
11. Development of progressive tribo-mechanical systems – composites on the basis of light
materials and devices for tribo-diagnostic and oil purification. Project of Ministry of Science
and Environmental Safety, TR 6303, 2005-2007., Project manager Prof.dr Miroslav Babić.
PARTICIPATION IN INTERNATIONAL PROJECTS
List of projects
1. TEMPUS projekat "Center for Productivity Research and Education",: Participant: Europian
Economy society, Brisel, 1991, project manager-Slavko Arsovski
2. CDP+ project No.: 038/2006 ”Machinery Condition Monitoring”, financed by Austrian
Development Cooperation – WUS – “Support to Higher Education in Serbia and Montenegro
2005-2007” (project No.: 8093-01-2005), project manager - Branislav Jeremić.
3. Training for Occupational Safety and Health Improvement, TEMPUS JEP_41045_2006.,
project manager - Aleksandra Janković
No
3
MENTORSHIP OF MSC THESIS
List of MSC thesis
1. Nenad Milić, System development of machinery condition maintenance according to the state
of processing centers.
2. Petar Todorović, System development of gear pump machinery condition monitoring
3. Marisav Lukić, Maintenance optimization of manufacturing equipment hydraulic system
4. Ivan Mačužić, Preventive maintenance of proportional hydraulic systems
5. Dejan Vidojević, Maintenance system redesigning of paint and lacquer production equipment
6. Jelena Grković, Machinery condition monitoring of hydraulic systems for coping on production
machines.
MENTORSHIP OF PHD THESIS
List of PhD thesis
1. Aleksandar Grozdanovski, Maintenance strategy of machinery systems for continual coal
exploitation
2. Ljubo Glamočić, Maintenance strategy of numerical controlled tool machines
3. Ivan Mačužić, Proactive approach in machinery system maintenance strategy
4. Petar Todorović, Complex condition monitoring of rotors
7. Dejan Vidojević, Maintenance strategy and the risk in complex machinery systems with the
complex relations
No
6
No
5
1.
1.
REVIKEW OF PAPERS IN INTERNATIONAL JOURNALS
List of reviews
EDITORS IN JOURNALS
List of edited journals
No
No
NOTE: Name the magazine, The Role (editor, co-editor, member of editing board, reviewer), from the
year-to, Class of juornal (international or local)

RESULTS OF PREDAGOFGICAL WORK
Lectures Courses Year
On own Faculty
Terotechnology - Bachelor academic studies 1988.-2008.
Tribology - Bachelor academic studies 1988.-1990.
Machinery Condition Monitoring - Bachelor academic studies 1990.-
On the other
university (the
name and
place of
institutions)
Mašinski
fakultet u
Prištini
Univerzitet u
Kragujevcu -
Centar za
interdisciplinarn
e i
multidisciplinar
ne studije i
naučna
istraživanja
Experimental methods - Master academic studies 1993.-2004.
Methods of Processing System Condition Monitoring - Master
academic studies
1993.-2004.
Maintenance Controlling in Industrial Systems – Master
academic studies
1993.-2004.
Maintenance Engineering - Bachelor academic studies 1999.-
Project Management - Bachelor academic studies 2004.-
Machinery System Maintenance - Bachelor academic studies 2004.-
Risk Assessment - Bachelor academic studies 2004.-
Tooling machines designing, exploitation, and maintenance -
Bachelor academic studies
1994.-2003.
Project Management - Master academic studies 2004.-2007.
In a foreign university (the name and place of institutions)
Other
Machinery Condition Monitoring – training of participators from industrial fields
Conditioning course for Occupational Safety and Health Improvement examination
PARTICIPATION IN DEVELOPMENT OF HIGER EDUCATION, SCIENTIFIC OR ART ACTIVITIES
AND PARTICPATION IN MANAGERUAL AND EXPERT BODIES AND ORGANIZATIONS
At the Faculty
At the university
Name of bodies or body
Chairman of Council: 1989.-1991 .god.
Vice-dean for Scientific-Research 1991.-1994.
Founder and Director of Terotechnology Center:
1993.-
Chief of Manufacturing Engineering Chair: 2006.-

At the level of the Republic, territorial autonomy
or local self-government
In management bodies
Member of Council for Rational Energy
Management of Government of Republic Serbia
Consultant of Ministry of Labor Employment and
Social Politics – Office for Occupational Safety
and Health Improvement, 2007.
Permanent Court expert-consultant in the
Engineering Field, 2007.-
Dean of Faculty of Mechanical Engineering in
Kragujevac:1998.-2000.
Other membership
Organization Committee Chairman of First
Yugoslav Tribology Conference YUTRIB '89
Organization Committee Chairman of XXIII
Yugoslav May meeting of "Machinery System
Maintenance", Kragujevac, 1998.