GCA-Newsletter_12_11.. - Gun Club of America
GCA-Newsletter_12_11.. - Gun Club of America
GCA-Newsletter_12_11.. - Gun Club of America
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Table<br />
<strong>of</strong> Contents<br />
2 Note From The President<br />
3 <strong>Gun</strong>Tech Program Guide<br />
4 Jack's Corner<br />
5 Glock 17<br />
6 Look Ma! No Ejector!<br />
8 Coming Next Month<br />
9 Name That Part Contest!<br />
Tip <strong>of</strong> the Month<br />
10 The Story <strong>of</strong> a Rifle<br />
13 A note from Hot Brass<br />
Editor Lenée Landis<br />
14 Resource Directory<br />
15 Producer's Cut<br />
16 Video Index<br />
The <strong>GCA</strong> Connection and <strong>Gun</strong>Tech DVD Magazine are published<br />
and produced by The <strong>Gun</strong> <strong>Club</strong> <strong>of</strong> <strong>America</strong> and distributed solely<br />
to current <strong>GCA</strong> Members. ©Copyright <strong>GCA</strong> 20<strong>11.</strong> All rights<br />
reserved. No part <strong>of</strong> this DVD or newsletter may be copied,<br />
reproduced, rented or transmitted for any reason without the<br />
written permission <strong>of</strong> the copyright holder.<br />
Contacting <strong>GCA</strong>: <strong>GCA</strong>, 351 Second Street, Napa, CA 94559,<br />
800-435-4262, Fax 707-253-2135, www.<strong>Gun</strong><strong>Club</strong>Of<strong>America</strong>.com<br />
Submissions and contributions: We welcome you to submit<br />
articles, stories, photos and videos for publication in the <strong>GCA</strong><br />
Connection and/or the <strong>Gun</strong>Tech DVD Magazine. <strong>GCA</strong> pays for<br />
submissions and contributions with "AGI Bucks." These coupons<br />
are redeemable dollar-for-dollar towards the purchase <strong>of</strong> any AGI<br />
product or AGI video course.<br />
Articles: Email your articles to jlandis@<strong>America</strong>n<strong>Gun</strong>smith.com.<br />
Articles and stories must be submitted in MS Word or MS<br />
publisher format. We pay for stories and articles we print by the<br />
word: 100-300 words = 20 AGI Bucks,<br />
300-500 words = 50 AGI Bucks, 500+ words = 100 AGI Bucks.<br />
Photos: Electronic photos must be submitted in a jpeg format<br />
with a resolution <strong>of</strong> at LEAST 640x480. Print photos are accepted<br />
but <strong>GCA</strong> cannot return any printed photos and all submitted<br />
photos will become the property <strong>of</strong> <strong>GCA</strong>.<br />
Videos: Videos must be on DVD or on MiniDV tape, S-VHS tape<br />
or Hi-8 tape. We cannot return any video tapes and all submitted<br />
videos will become the property <strong>of</strong> <strong>GCA</strong>. All videos must have<br />
sound on the tape that explains what we are watching.<br />
We pay by the minute for each minute (or portion there<strong>of</strong>) that<br />
we use. 10 AGI Bucks per finished minute.<br />
A Note from<br />
the President . . .<br />
2011 in review:<br />
<strong>GCA</strong> delivers the goods!<br />
As I look back over the last year, remembering all the firearms we have evaluated and<br />
reviewed for you, plus all the product testing, interviews, bench and field tips, "in the<br />
classroom" sessions, trade shows, Q&A, live <strong>GCA</strong> web meetings and more, it fills me with<br />
pride that the <strong>GCA</strong> team worked so hard to deliver value month after month.<br />
This is truly a team effort as it takes many individuals to deliver <strong>Gun</strong>Tech and your <strong>GCA</strong><br />
benefits each month and so I would like to thank (in no particular order as they all<br />
contribute greatly); Keith Hezmalhalch, Dianne Quick, Jack Landis, Rich Selby, Trina<br />
Selby, Lenée Landis, Bob Dunlap, Ken Brooks, Heather Whitting, Chuck Pope, James<br />
Lummel, Darrell Holland, Robert Dunn, Renée Grose, Mike Middleton, Holly Mayfield,<br />
Paula Kelly, Jacob Kelly, our entire <strong>GCA</strong>/AGI Staff and all <strong>of</strong> you who have contributed<br />
articles or support the <strong>Gun</strong> <strong>Club</strong> <strong>of</strong> <strong>America</strong> with your membership.<br />
We look forward to providing you with an<br />
information packed 20<strong>12</strong>. You can look<br />
forward to numerous evaluations and reviews<br />
<strong>of</strong> new guns and products, along with<br />
extensive training providing you insider tricks<br />
and techniques. You will also receive invites to<br />
special events including the upcoming<br />
<strong>Gun</strong>Stock on Father's Day Weekend 20<strong>12</strong>!<br />
Thank you for your support over the last<br />
year, we couldn’t do it without members<br />
like you. Here’s to a great New Year!<br />
Gene Kelly<br />
Gene Kelly, President,<br />
<strong>Gun</strong> <strong>Club</strong> <strong>of</strong> <strong>America</strong><br />
Gene Kelly<br />
President, <strong>GCA</strong><br />
Subscriber information - missing or damaged issues: If an issue<br />
<strong>of</strong> the <strong>GCA</strong> Connection and/or <strong>Gun</strong>Tech DVD is lost in the mail or<br />
arrives damaged, simply contact <strong>GCA</strong> at 800-435-4262 for a<br />
replacement.<br />
Change <strong>of</strong> address: If you move or change your mailing address<br />
contact <strong>GCA</strong> at 800-435-4262 so we can update our mailing list.<br />
Back issues <strong>of</strong> <strong>Gun</strong>Tech: Back issues <strong>of</strong> <strong>Gun</strong>Tech are only<br />
available to current, paying members <strong>of</strong> the <strong>Gun</strong> <strong>Club</strong> <strong>of</strong> <strong>America</strong>.<br />
Single issues <strong>of</strong> <strong>Gun</strong>Tech are available for $30 each + $5 shipping.<br />
Multiple issues are available in either 6 or <strong>12</strong> month sets. You can<br />
get 6 consecutive months <strong>of</strong> <strong>Gun</strong>Tech for only $168 ($28 each) +<br />
$10 shipping. You can order an entire year <strong>of</strong> <strong>Gun</strong>Tech (<strong>12</strong> consecutive<br />
issues) which comes with a sturdy binder that holds all<br />
<strong>12</strong> issues, for only $3<strong>12</strong> ($26 each) + $<strong>12</strong> shipping.<br />
DVD binders with a capacity <strong>of</strong> <strong>12</strong> issues are available for your<br />
collection for only $19.95 + $4 shipping. To order binders or back<br />
issues <strong>of</strong> <strong>Gun</strong>Tech contact <strong>GCA</strong> at 800-435-4262.<br />
2<br />
We'll see<br />
you next year. . .<br />
in <strong>Gun</strong>Tech!
<strong>Gun</strong>Tech<br />
Program Guide<br />
What’s In This Month’s Issue?<br />
Welcome to the December issue <strong>of</strong> <strong>Gun</strong>Tech. Happy Holidays<br />
and Merry Christmas! We have some HUGE presents for you<br />
under the tree this year. In the true spirit <strong>of</strong> giving, Jack<br />
reviews more new products and shows you his “Tool <strong>of</strong> the<br />
Month,” Ken gives another “Tip from the Workbench,” Bob<br />
answers more <strong>of</strong> your gunsmithing questions and Darrell has<br />
a “Tip for the Woodsman” that may just help you chop down<br />
your Christmas tree if you are running a bit late this season!<br />
But if THAT isn’t enough to fill your Christmas stocking, Jack<br />
ALSO has a great “Project <strong>of</strong> the Month” for you! This one is<br />
something that EVERYONE will have to do sooner or later and<br />
it is also a perfect project to do during the winter months.<br />
Last but not LEAST, if you love SURPRISES on Christmas<br />
morning, then you’ll REALLY love this month’s<br />
Disassembly/Reassembly Course because odds are that you<br />
have NEVER seen this gun before (let alone the INSIDE)!! So<br />
pour the eggnog and grab your figgy pudding, because this<br />
is one SA-WEEET issue <strong>of</strong> <strong>Gun</strong>Tech.<br />
Product Review<br />
We all need a thorough scrubbing now and<br />
then but most <strong>of</strong> the time a quick scrub will<br />
do. Well, when it comes to giving your<br />
firearms a quick cleaning, Jack has what<br />
may just be the perfect product! Not only<br />
that, it comes in two different styles and it turns out that Jack<br />
REALLY needs one <strong>of</strong> them. Just to be sure it’s going to work<br />
properly for him, Jack tests this product out on, well, you’ll<br />
see. Sometimes he just never learns.<br />
Product Review<br />
We have all heard and seen<br />
the many “bottoms” that are<br />
out there now and many <strong>of</strong><br />
us have chosen a favorite<br />
that works just right for our<br />
particular gun and shooting<br />
style (magazine bottoms that is…), well here is one that is just<br />
a BIT different than the rest. Jack uses Keith’s Glock 27 to<br />
demonstrate it and wastes no time in getting right to the point<br />
<strong>of</strong> this particular magazine bottom!<br />
Tool <strong>of</strong> the Month<br />
Own a SIG? Then you know<br />
first-hand just why Ken<br />
loves them so much.<br />
However there are certain<br />
parts that are somewhat<br />
difficult to disassemble and reassemble with standard hand<br />
tools. This product solves that problem and is so compact that<br />
you can keep it in your pocket. Leave it to the folks at Samson<br />
to come up with another handy solution!<br />
Ask the <strong>Gun</strong>smith<br />
The first question Bob answers this month involves a Marlin<br />
70HC (or Model 99). Your fellow <strong>GCA</strong> member is having<br />
ejection problems and having trouble pin-pointing the cause.<br />
Bob wastes no time in reminding him <strong>of</strong> the inherent<br />
strengths and weaknesses <strong>of</strong> the design and points out a<br />
couple different things that could be the culprit. The second<br />
question concerns a Charles Daly shotgun with a broken bolt<br />
handle. The problem is that new parts are no longer available<br />
for this gun and used parts are hard to come by. Bob gives<br />
him a couple different options, including making a new bolt<br />
handle from one taken out <strong>of</strong> another brand and model <strong>of</strong><br />
gun!<br />
Product Evaluation<br />
Some <strong>of</strong> you might wonder<br />
what the difference is<br />
between a “Product Review” and a “Product Evaluation.” Well,<br />
here it is! A product review is when we show you a product,<br />
describe its features, and tell you that we recommend it. In<br />
some cases we “have” or “are currently” using that product.<br />
A product evaluation is what we do when we need to assemble/compare<br />
pre/post product performance <strong>of</strong> the gun and<br />
show it on camera, or at least the results.<br />
This month Jack is evaluating the “Har-Bar” for the Ruger<br />
Mini-14 rifle. This product was one that YOU told Jack about,<br />
so he proceeded to check it out! If you own a Mini-14 then<br />
you know that it is not the most accurate rifle around. But<br />
unless you want to change-out the stock and buy a pricey<br />
new heavy-barrel for it you pretty much have to live with the<br />
accuracy issues, that is until the Har-Bar came along! This<br />
device is easy to install, adds a few options to your gun at the<br />
same time if you want, and the price doesn’t “break the bank”<br />
either. But will it perform as promised?! Check it out!<br />
Tip for the Woodsman<br />
Darrell's tip this month regards the "proper" hatchet for your<br />
field excursions. This one isn't cheap, but it can do everything<br />
for you, including shaving. This lightweight is<br />
Tips from the Workbench<br />
Ken is back this month with another great tip from his workbench.<br />
This time he shows you how he cuts through all the worth its weight<br />
Gransfors Mini<br />
crud to achieve a nice finish on his work. You may have in gold,<br />
Belt Axe<br />
thought you knew how to use the wire wheel and what to see why.<br />
watch out for but… well, you know Ken, he has a few techniques<br />
we’re willing to bet you haven’t tried yet! Continue on page 13<br />
3
4<br />
Jack’s<br />
Corner<br />
by Jack Landis<br />
AGI Technical Services Manager<br />
and <strong>GCA</strong> Connection Editor<br />
Well here it is again, approaching<br />
the end <strong>of</strong> an old year and the beginning <strong>of</strong> a new. The<br />
Beauteous Lenée and I are just back from our annual<br />
Thanksgiving trek to the lower Klamath River to enjoy some<br />
good food, good drink, good friends, and GOOD STEELHEAD<br />
FISHING! We stay at the Marble Mountain Ranch (www.marblemountainranch.com)<br />
just above Somes Bar, California,<br />
about 50 miles north <strong>of</strong> the Klamath’s confluence with the<br />
Trinity.<br />
We arrived the Tuesday before Thanksgiving and it rained all<br />
the way up from Los Angeles. This year no kids traveled with<br />
My Leader and I or Bob and Barb. This is beginning to happen<br />
more <strong>of</strong>ten now, twelve years ago we had varying gaggles<br />
<strong>of</strong> kids and grandkids in attendance. Instead <strong>of</strong> working<br />
out schedules for kids, Bob eats, drinks, fishes and sleeps, I<br />
eat, drink, cook, and fish, and the ladies sleep, knit, read, do<br />
puzzles, eat, cook, and shop for artisan ceramics in the downriver<br />
town <strong>of</strong> Orleans. It’s a dark and lonely existence, and<br />
only a true pr<strong>of</strong>essional can bear up under the strain.<br />
Bob had fished all day Tuesday in the pouring rain, and the<br />
river was still flowing at twice the volume Wednesday. That<br />
would be optimal for our scheduled float trip down the river.<br />
Bob and Mz. Barbara barbecued some great marinated tri-tip<br />
and all the fixings for dinner, after which Bob and I kicked the<br />
dirt around with the ranch’s owner, Doug Cole, and finally<br />
reached the decision to forego the trip this year and do it<br />
again next year. Bob and I have come to the agreement over<br />
the years with Doug that we keep his guns running and he<br />
takes us on a drift boat day. Works for us! Bob and I thus girded<br />
our loins, well, sorta’, and headed down to the river to confront<br />
the wily steelhead from the banks and shallows. I didn’t<br />
beach any Wednesday, but an assortment <strong>of</strong> hits, steals, and<br />
leaps before break-<strong>of</strong>fs kept my interest up. Oh yeah, Bob, as<br />
usual, caught several, blah, blah, snooze, snore. Harrumpf!<br />
Bob and I work opposite sides <strong>of</strong> the river, and his pattern is:<br />
1. Catch fish<br />
2. Raise fish for my admiration (^%$&^)*&%^!!!<br />
3. Take a nap in the sun for an hour<br />
4. Repeat as time allows<br />
This is certainly NOT emblematic <strong>of</strong> the diligent and focused<br />
approach that your Editor employs. Indeed. Harrumpf!<br />
Ah well, back to the ranch at the end <strong>of</strong> the day and I made<br />
up some Buffalo Strogan<strong>of</strong>f and Sapphire Martinis (two <strong>of</strong> my<br />
signature efforts) to round out the day. Thursday started with<br />
some fishing, some lounging and lying, and the ladies made<br />
up a perfect traditional Thanksgiving meal. Oh my, roasted<br />
turkey, stuffing, potatoes, GRAVY, cranberry sauce, salads,<br />
vegetables, assorted pie . . . Oh my straining belt.<br />
More fishing Friday, a couple <strong>of</strong> nice adults in the 4-5 pound<br />
range took sufficient <strong>of</strong>fense at my <strong>of</strong>ferings to attack in what<br />
would have been a heroic but suicidal assault, had this not<br />
been “Catch & Release” water. Sort <strong>of</strong> like what happens<br />
when my paycheck arrives.<br />
Mr. Bob barbecued some legal, if somewhat smaller fish for<br />
dinner. His fish, my scratch Tarter Sauce and wine, seems like<br />
a fair trade. Saturday saw us down in Orleans where the<br />
ladies spent as much as a week’s lodging for cups, plates,<br />
bowls, etc. at the shop <strong>of</strong> Dee, The River Artisan. He’s about<br />
to the point that I need to take him as a dependent on my<br />
income taxes. Turkey dinner redux that night, I think it may<br />
actually get better (like spaghetti), if that’s possible, a day or<br />
two after the debut.<br />
Sunday is “pack ‘n scat” for Lenée and I, but Bob gets another<br />
morning to fish, given his five hour return drive vs. our<br />
twelve. The time from 0500 Tuesday morning to 2200 Sunday<br />
passed in what seems to have been, oh, about forty five minutes.<br />
It hardly seems fair to me that beside bodies that don’t<br />
hurt, sag, or list, the young’s hours seem like days and we<br />
“veteran humans” see the days going by in minutes. Good<br />
thing I’m still such a young one with all <strong>of</strong> my teeth, hair, and<br />
looks. Yep. That’s my story and I’m stickin’ to it!<br />
Home now is when the Holiday season kicks into high gear.<br />
Mr. Gene has me building another pair <strong>of</strong> custom Ruger<br />
10/22s for <strong>GCA</strong> related prizes, SHOT Show is coming up, this<br />
issue <strong>of</strong> <strong>Gun</strong>Tech and the SHOT Show edition <strong>of</strong> Hot Brass<br />
have the Landis ancestral manse humming with (semi)<br />
directed activity. Sorting out the gifts for the kids and grandkids,<br />
and all <strong>of</strong> the rest <strong>of</strong> the usual Christmas turmoil means<br />
we are never bored or lack for things to do. Add to that, Lenée<br />
keeps discovering people at the church (including our new<br />
Pastor) who are eager to learn to shoot once they find out<br />
what we do. Same goes for me and Techs at the VA facilities.<br />
Luckily we live close to Lefty Longridge’s Deadwood Boys<br />
range and there is no one there during the week. Since we<br />
can do what we do any time <strong>of</strong> the day or night, and do, we<br />
can occasionally slip over to the range for a few hours in the<br />
morning before the wind comes up and introduce new people,<br />
young and old, male and female, to the world <strong>of</strong> shooting.<br />
‘Til next month, break some new ground ‘smithing and<br />
shooting, and please introduce someone new to each,<br />
Jack Landis<br />
(800) 797-0867 x 104 • (818) 833-9030 Fax<br />
jlandis@americangunsmith.com ◆
Glock 17<br />
By Robert Dunn<br />
AGI and <strong>Gun</strong>Tech Video Producer,<br />
AGI Pro Course Graduate, <strong>GCA</strong> Charter Member<br />
Glock 17 pistol, magazines and 9mm cartridges<br />
Over the years, Glock has become a “household” word, at<br />
least in the Urban Dictionary. There are many different<br />
models <strong>of</strong> Glock pistols, but when I envision a Glock, my mind<br />
goes back to the 1980s and I picture a Glock 17. Though the<br />
pistol has gone through some noticeable design changes in<br />
the area <strong>of</strong> the grip and the recoil spring and guide rod, the<br />
functioning and safety features have remained the same.<br />
For some <strong>of</strong> the younger crowd it might be hard to imagine<br />
the firearms industry without polymer-framed pistols. Gaston<br />
Glock, the Austrian inventor <strong>of</strong> the Glock pistols, changed all<br />
<strong>of</strong> that. Though Heckler & Koch had a polymer-framed pistol<br />
in the ‘70s, now just about every major (and minor) manufacturer<br />
<strong>of</strong> semi automatic pistols has a striker fired (no hammer),<br />
polymer-framed handgun. Like many weapons, their<br />
popularity didn’t become widespread in the civilian market<br />
until they had achieved a high level <strong>of</strong> use and acceptance in<br />
the Military and Law Enforcement communities. The Glock 17<br />
has become a standard in most Police Departments in the<br />
United States and abroad. The Glock pistol is equally popular<br />
with military units throughout the world. As a matter <strong>of</strong> fact,<br />
the Glock 17 was designed for the Austrian Army as a<br />
replacement for the Walther P38 that was in use at the time.<br />
This pistol has also proven extremely popular in the civilian<br />
market for many years now. Though many think that the number<br />
17 in the pistol’s name results from its potential 17 round<br />
magazine capacity (also available in 19 and 33), the 17 actually<br />
represents Gaston Glock’s 17th patent submission.<br />
The Glock 17 is a lightweight pistol compared to a steel<br />
framed design, as polymer is stronger and 86% lighter than<br />
steel. The gun’s proprietary Tenifer metal treatment insures a<br />
tough and hard surface on the slide and barrel that is resistant<br />
to scratching and corrosion.<br />
Glock 17 barrel<br />
The camming action <strong>of</strong> the lock up <strong>of</strong> the pistol resembles<br />
that <strong>of</strong> the Browning High Power. The rifling <strong>of</strong> the barrel is a<br />
right hand hexagonal type and its length <strong>of</strong> twist is 250mm.<br />
You can always tell if a round has been fired from a Glock<br />
because <strong>of</strong> the unique elongated imprint <strong>of</strong> the firing pins<br />
impression in the primer <strong>of</strong> the empty case, unlike the round<br />
indentation from a “traditional” shaped firing pin.<br />
Glock employs what they call “Safe Action” to describe the<br />
pistol’s three safety features, all <strong>of</strong> which are deactivated<br />
when the trigger is pulled for firing, and reactivated upon<br />
releasing the trigger. The first safety is an external trigger<br />
safety and consists <strong>of</strong> a lever found on the trigger blade itself.<br />
This lever will rotate and act upon the trigger bar and connector<br />
when the finger naturally pulls the trigger. The other<br />
two safety features <strong>of</strong> the pistol are internal. One uses a hardened<br />
steel pin to block the firing pin in the firing pin channel<br />
until the trigger is pulled. The third safety (the drop safety)<br />
will only allow the gun to fire if the trigger is pulled straight<br />
back as the trigger bar will then be guided on a safety ramp<br />
inside the firearm.<br />
The trigger pull <strong>of</strong> the stock gun is about 5.5 lbs., but for law<br />
enforcement purposes you can buy what is called a New York<br />
Trigger. This will give you a trigger pull <strong>of</strong> about <strong>12</strong> lbs. A<br />
15-lbs pull can be achieved with a New York plus and New<br />
York Plus-Plus Trigger. These options were implemented as<br />
“Lawyer” safety features. Of course, the best way to prevent<br />
accidental (negligent) discharges is to keep your finger <strong>of</strong>f<br />
the trigger until you intend to shoot. The trigger IS NOT a<br />
finger rest.<br />
The Glock 17 is a durable weapon platform and can even be<br />
safely fired underwater with the addition <strong>of</strong> special spring<br />
cups that fit in the striker assembly. These allow water to pass<br />
by without slowing the forward travel <strong>of</strong> the firing pin and<br />
causing a misfire. The solid design and lock up <strong>of</strong> the pistol<br />
allows for the higher pressures <strong>of</strong> aquatic operation to be<br />
possible.<br />
This does not mean that you can go scuba diving and shoot<br />
at sharks (though it is possible as an alternative to being<br />
eaten alive), it was intended to allow Special Forces units to<br />
safely fire the weapon after being submerged or close to the<br />
surface area.<br />
There are a several precautions which you must consider<br />
before you show your friends how to shoot at fish while using<br />
a snorkel. Specifically, 9mm is the only “safe” caliber to shoot<br />
while submerged, as rounds such as .40 S&W and .45 ACP<br />
Continue on page 15<br />
5
Clint’s article is a great example <strong>of</strong> knowing what was missing,<br />
a standard feature <strong>of</strong> a world standard gun. He didn’t waste<br />
time and energy by wringing his hands and whining “Woe is<br />
me, I’ve never seen this situation before.” He knew what had<br />
to be accomplished, i.e. “eject cartridge (case), stop rearward<br />
travel <strong>of</strong> bolt”, so he rigged a way to make that all happen and<br />
look pr<strong>of</strong>essional to boot! Clint never turns down a job just<br />
because he’s never done it before or takes the easy way out,<br />
and his solutions are always, to say the least, interesting,<br />
ingenious and inventive. Editor<br />
A client brought in an interesting project the other day. He<br />
had purchased a rifle <strong>of</strong> unknown heritage that was beautifully<br />
blued and kind <strong>of</strong> looked like a Mauser. More on that<br />
later. It had been re-barreled, but whoever did it didn’t bother<br />
to stamp the caliber on the barrel. The man from whom he<br />
bought it told him that the caliber was “8mm-06 or .300<br />
something or other, probably a magnum.” He also brought a<br />
stock in which he wanted to mount the barreled action. He<br />
wanted it inletted, the barrel free floated and glass bedded,<br />
but he wanted to do the exterior himself.<br />
The first two photos were taken to aid in determining what<br />
model, exactly, this was. The rest <strong>of</strong> the photos were taken<br />
when I realized that this was a project worth sharing. In<br />
between are some staged photos to illustrate what took place<br />
in between the start and the finish.<br />
First <strong>of</strong> all, what was this? The bolt said Mauser; the trigger<br />
said Mauser, but LOOK! No ejector! Not even mounting lugs,<br />
or bosses, for an ejector! Not only was there no provision for<br />
mounting an ejector/bolt stop, there never had been. Wait.<br />
What is that screw ahead <strong>of</strong> the slot? Perhaps that was how<br />
the ejector/bolt stop was mounted. Well, my client said that<br />
6<br />
Look Ma!<br />
No Ejector!<br />
Or, "What is this, anyway?"<br />
By Clint Hawkins<br />
Owner Hawkins Arms LLC,<br />
AGI Pro Course Graduate, <strong>GCA</strong> Member<br />
Unknown Mauser type, where is the ejector/bolt stop lug?<br />
the fellow from whom he bought the gun allowed that it was<br />
probably a Mauser and included a couple <strong>of</strong> ejector/stop<br />
assemblies, but didn’t know how to mount them. The one on<br />
the left is the usual assembly we’re used to, a little research<br />
showed the one on the right to be probably an Argentine<br />
Mauser assembly. I know, I could have asked Ken Brooks or<br />
John Bush, but what fun would that have been?<br />
Standard ’98 ejector/bolt stop on left, Argentine (?) on right.<br />
At this point, I told my client that, yes, it can be done. I’d like<br />
to find the proper ejector/stop assembly first, but it would<br />
take some time to try to find one. Failing that, yes, I can fabricate<br />
the necessary mounting boss. The whole thing would<br />
be pricey. Maybe he would like to just buy another Mauser.<br />
It would be cheaper.<br />
His response was, well, no. He’d already had paid $X00 for the<br />
rifle, and another $X00 for the White Bastogne wood stock,<br />
and he’d like to see the whole thing come to fruition. OK, I<br />
said, I’ll start looking for the proper ejector/stop assembly.<br />
Along with the task <strong>of</strong> looking on every website I could find<br />
that had anything about Mausers, I sent four photos to Jack,<br />
knowing that if he couldn’t identify it, he knew someone who<br />
could. Zeros. No one seemed to know anything about this<br />
model. Jack called me later to tell me that he thought he<br />
remembered some photos that might identify it. He would<br />
look for them. If he does indeed have them, they are buried<br />
somewhere in the archives. (OK, mea culpa – Ed).<br />
So, let’s start with something somewhat easier. What caliber is<br />
it? Ken has shown us how to cast a chamber, using Sulphur. I<br />
use Cerro-Safe, a Bismuth alloy that melts at about 50 degrees<br />
less than boiling water. The casting dimensions indicated that<br />
it was probably chambered in .308 Winchester. Remember that<br />
the casting dimensions are that <strong>of</strong> the chamber, not the cartridge.<br />
A .308 Win Headspace gage confirmed it to the point<br />
that I felt safe in firing one later.<br />
Here is a picture showing, starting<br />
at the top, the chamber casting,<br />
the headspace gage and the<br />
cartridge.<br />
Cerro-Safe chamber cast, “Go” headspace<br />
gauge, .308 Winchester cartridge<br />
On we go to the challenge <strong>of</strong> how to mount the “standard”<br />
ejector/stop assembly. It seemed possible to form a contiguous<br />
lug from the receiver by TIG up to a shape that could be<br />
milled or ground into the proper shape and drilled and slotted.<br />
That thought lasted about (SNAP) that long. Structural<br />
Continue on page 7
Look Ma! Continued . . .<br />
integrity was a main concern, not to mention that the exact<br />
location needed to be determined through a process <strong>of</strong> fitting.<br />
So thought I. This is especially true in that the dimensions<br />
<strong>of</strong> the bolt stop positioning were slightly different<br />
between the two assemblies, as can be seen below.<br />
Different ejector/bolt stop dimensions in the ’98 left and Argentine right<br />
It was determined that the best thing to do was to attach a<br />
single piece <strong>of</strong> metal already properly dimensioned and pivot<br />
hole drilled and then cut it for the ejector slot rather than try<br />
to attach two pieces and keep them in alignment. But how<br />
should it be attached? The options were:<br />
1) TIG: In order to assure a proper weld, the beveling<br />
at the seam and the jigging required to maintain<br />
proper alignment seemed to be inordinately<br />
complicated. Also, there would be much metal to<br />
remove after welding to make the job “pr<strong>of</strong>essional.”<br />
2) Brazing: Same objections.<br />
3) Silver Solder: Similar jigging requirements, but no<br />
beveling and less heat made this option more<br />
acceptable, especially since there would be<br />
little “clean up” required upon completion.<br />
What dimensions should it have? This was partially<br />
determined by the dimensions <strong>of</strong> the cavity <strong>of</strong> the bolt stop<br />
assembly. Again this was different in the two assemblies. I<br />
selected to use the more familiar assembly. It was further<br />
decided that overall dimensions are not critical; but that it<br />
should occupy most <strong>of</strong> the cavity in the fore/aft direction and<br />
that the depth <strong>of</strong> the cavity plus about .010" would suffice for<br />
the width <strong>of</strong> it. For the height, it was decided that the milled<br />
surface on the receiver would provide that dimension, as if it<br />
were too short or too long it would not look “original.” This<br />
proved to be about .011” shorter than the cavity allowance,<br />
but this was not critical<br />
as the ejector in<br />
its slot determined<br />
the vertical positioning<br />
<strong>of</strong> the ejector/bolt<br />
stop assembly in the<br />
long haul.<br />
Measuring the cavity width inside the ejector assembly<br />
What about the pivot hole? This photo shows this fairly<br />
clearly. This also is not thousandths <strong>of</strong> an inch critical, but<br />
was determined by measuring the location <strong>of</strong> the hole from<br />
the edge <strong>of</strong> the assembly that would be next to the receiver,<br />
then adding about .010" for adequate clearance and providing<br />
at least .020" structural integrity ahead <strong>of</strong> the hole.<br />
Careful imaginering/fitting <strong>of</strong> the ejector/bolt stop gives the<br />
most likely receiver location for where the pivot hole should<br />
be, thus also the mount positioning.<br />
Since I do not have a mill, I<br />
farmed out the mount fabrication<br />
job to another, better equipped,<br />
gunsmith with whom I have a<br />
good working relationship.<br />
Ejector/bolt stop mounting lug on<br />
the gun (bottom center).<br />
Starting to look more '98ish now.<br />
After soldering the mount, we end up with something that<br />
looks about like this, being shown in this staged photo here<br />
as initiating the slot in the mount with a hack saw used only<br />
to mark an aiming point to ensure proper perpendicular<br />
alignment with the receiver’s slot, then completing and<br />
widening the slot with a rotary tool. I cannot show the position,<br />
near vertical, used to make sure the cut was accurate.<br />
Slowly with a steady hand as I have not the milling machine<br />
that would have been more precise. Also, in this staged<br />
photo, the saw<br />
slipped into the<br />
position as shown<br />
rather than as actually<br />
used. Sorry. Be<br />
sure to wear eye<br />
and face protection!<br />
Hacksaw blade shown to<br />
illustrate step #1 in the slot<br />
lengthening process<br />
After de-burring the<br />
sharp edges, I put it<br />
all together, shown on<br />
page 8 with the stock<br />
in place. Perfect.<br />
Then I put the bolt in.<br />
Oops!<br />
Final dimensioning <strong>of</strong> the ejector blade slot<br />
After fitting the bolt back into the gun, I found that the<br />
ejector did not enter the bolt’s ejector slot. Why? After several<br />
assembly/disassembly trials, I discovered that the ejector<br />
slot in the receiver as designed for the original ejector/bolt<br />
stop did not extend to the rear enough to provide clearance<br />
for this ejector. Above on the right, you can see that slot<br />
being extended about to the same position as the pivot hole.<br />
Now, it’s time to re-blue the damaged area. The barrel is still<br />
beautifully blued. Do I need to re-blue the entire gun? Well,<br />
I will if I have to, but I decided to try an experiment. I have<br />
had a fair amount <strong>of</strong> success using Brownells Dicro-Pan and<br />
also their Oxpho-Blue. The former is generally used in<br />
conjunction with boiling water and requires a considerable<br />
Continue on page 8<br />
7
Coming Next Month<br />
In <strong>Gun</strong>Tech 69<br />
Tiny Terror: Taurus TCP 738 .380 ACP Pistol<br />
The January issue <strong>of</strong> <strong>Gun</strong>Tech will have the<br />
excitement <strong>of</strong> a year-end clearance sale and the<br />
satisfaction <strong>of</strong> a meal featuring your favorite<br />
Christmas goodies! We will be serving up the evaluation on<br />
the Taurus TCP which was bumped from the December issue<br />
because we couldn’t fit any more<br />
under the Christmas tree AND we<br />
will also feature a second evaluation on<br />
the new Ruger LC9.<br />
Lightning in a matchbox: the Ruger LC9<br />
Jack, Gene and Ken will all be bringing you cool segments<br />
from the SHOT Show including: new guns, affordable custom-ammo,<br />
optics, cleaning equipment and more! Darrell has<br />
another great “Tip for the Woodsman,” Ken interviews a guntoting,<br />
horse-riding, television celebrity and your<br />
Disassembly/Reassembly Course is on the current Chinese<br />
version <strong>of</strong> the good ol’ side-by-side “Coach <strong>Gun</strong>.”<br />
All-in-all, your January issue <strong>of</strong> <strong>Gun</strong>Tech will be giving you<br />
more “bang” for your buck. In fact, you’ll be satisfied all the<br />
way up to the February issue . . . <strong>of</strong> <strong>Gun</strong>Tech! ◆<br />
Look Ma! Continued . . .<br />
amount <strong>of</strong> carding. The latter is considered a cold blue, but<br />
most <strong>of</strong> my success with it has been to heat the metal considerably<br />
before application. This requires less carding and<br />
that can usually be accomplished with vigorous use <strong>of</strong> steel<br />
wool.<br />
Looking REAL<br />
"98ish" now!<br />
Suppose I just heat<br />
up the receiver and<br />
employ the Dicro-Pan method? I did and the initial results<br />
were beautiful until several applications proved that the top <strong>of</strong><br />
the receiver just was not going to survive the carding without<br />
a mottled appearance. Well, I can still re-blue the whole gun.<br />
Let’s try another approach, being basically lazy. Let’s try<br />
using Oxpho-Blue right over the Dicro-Pan. One thing nice<br />
about Oxpho-Blue is that once the polish is well established,<br />
you don’t need to card the last application, you just polish it<br />
up. Voila! The color! It works! Eet ees beeooteefull!<br />
Below, you see it in its stock which has been inletted, free<br />
floated, glass bedded and ready for the client to do his part<br />
on the exterior. AGI has wonderful courses showing you how<br />
to do just about anything you have questions about in metal<br />
and wood work.<br />
◆<br />
Another day, another dollar . . . and feeling REAL proud<br />
One <strong>of</strong> our members sent in an article<br />
to share with us this holiday season . . .<br />
8
*$50 limit<br />
As <strong>of</strong> the 3rd <strong>of</strong> December we had 9 answers.<br />
All were correct with regards to the part, the<br />
disconnector/trigger drawbar from all iterations <strong>of</strong><br />
the Ruger Standard Auto (MKI, II, III, & 22/45) and<br />
its clones, including the AMT. Only two <strong>of</strong> you correctly identified it as the Volquartsen<br />
Titanium version. WAY TO GO, BOYS & GIRLS!!<br />
We said we would take the 6th, last before publication date, and 1st correct answers for<br />
the first three prizes, with Honorable Mention going to the 2nd correct answer. An extra<br />
$20 AGI went to the first five who guessed the manufacturer. This month's winners are<br />
posted below. CONGRATULATIONS TO ALL!! Now on to this month's . . .<br />
Name the part above and its purpose.<br />
We will take the 6th, last before publication date, and 1st correct answers for the first<br />
three prizes. Honorable Mention to the 2nd correct answer.<br />
Email me at jlandis@americangunsmith.com with the correct answer and win the<br />
Armorer’s or specialty course <strong>of</strong> your choice, with a $50 limit!!<br />
You can call me with the answer ONLY if:<br />
1. You do not have a computer/email access.<br />
2. You call (800) 797-0867, ext. 104 between 0800 - 1700 PDT Monday - Friday.<br />
3. If you get my voicemail, you leave your name, phone number, and guess.<br />
The voicemail time stamps, so be CLEAR with the info.<br />
Tip <strong>of</strong> the Month<br />
One <strong>of</strong> those soooo simple "Why didn't I think <strong>of</strong> that?"<br />
head-slappers that I dearly love, and dang near free as well!<br />
What could be better? Thanks a lot Larry and feel free to<br />
pass along some more. Jack<br />
Dear Jack,<br />
Watching Ken remove the stock in a recent <strong>Gun</strong>Tech<br />
disassembly course reminded <strong>of</strong> a great tip I always use.<br />
Take about three inches <strong>of</strong> a piece <strong>of</strong> ½ inch electrical tubing,<br />
it is around .042 thick. Place it over the bit end <strong>of</strong> your<br />
long screwdriver. Drop all that down in the stock hole. The<br />
tubing will surround the bolt or screw head and the screw<br />
driver will center align with the slot. This will make sure you<br />
are on the exact top <strong>of</strong> the stock screw and not on the side<br />
<strong>of</strong> it. This is the best way to keep the screw driver bit in the<br />
center and not between the screw and the wood. Get it in<br />
there by mistake and crank on it and you will certainly<br />
break through the wood in the thin sides <strong>of</strong> the stock.<br />
It looks like this.<br />
Larry C. Jones,<br />
<strong>Gun</strong>Wurkz<br />
Ph: 210-378-5505 • Website: www.gunwurkz.com<br />
9
The Story<br />
<strong>of</strong> a Rifle<br />
Another Classic <strong>Gun</strong> Digest reprint<br />
This relic <strong>of</strong> African days still does the job.<br />
From Ken Waters, its owner, we learn . . . THE STORY<br />
THIS is the story <strong>of</strong> a rifle, but it must commence with a tale<br />
about a man, a man <strong>of</strong> action to whom big game hunting was<br />
a way <strong>of</strong> life and the rifle an extension <strong>of</strong> his will. Together,<br />
they went repeatedly in harm's way.<br />
For a British <strong>of</strong>ficer in India in late 19th Century, leaves long<br />
enough to permit going to England were seldom and the<br />
abundance and variety <strong>of</strong> hunting within the sparse limits <strong>of</strong><br />
military pay provided an altogether satisfying alternative. To a<br />
young lieutenant <strong>of</strong> the 2nd Bengal Cavalry, Himalayan bear<br />
and ibex along the Northern Frontier, Indian deer and<br />
goural in the lower hill country, and best <strong>of</strong> all, the great<br />
striped tiger must have been powerful lures. For relatively few<br />
rupees, he could orga nize his own hunting party.<br />
That was true for hundreds <strong>of</strong> <strong>of</strong>fi cers in the old British Indian<br />
Army who chose big game hunting as a prin cipal form <strong>of</strong><br />
recreation. I've chosen to write about a man with the unlikely<br />
name <strong>of</strong> Vesey Mangles Stockley who successfully combined<br />
vocation and avocation.<br />
As a subaltern under General Wol seley in 1882, be had<br />
helped defeat the forces <strong>of</strong> Arabi Pasha at Tel-ei-Ke bir. Then<br />
came orders to India where a series <strong>of</strong> duty assignments kept<br />
him until the end <strong>of</strong> the century. In 1900, Captain (or perhaps<br />
it was by then Major Stockley) was in China as part <strong>of</strong> the<br />
multi-national force putting down the Boxer Rebellion. Then,<br />
he returned to India where, at some un determined point in<br />
time, he was ap pointed to command the 16th Caval ry, Indian<br />
Army, with the rank <strong>of</strong> colonel.<br />
Polo after five when the day's heat had subsided provided<br />
active sport for the young cavalrymen, but the month's leave<br />
that came once a year was the best time for hunting enthusi -<br />
asts, and Colonel Stockley was no ex ception. Less usual for<br />
those days, his wife accompanied him on several <strong>of</strong> those<br />
trips afield.<br />
A careful study <strong>of</strong> the game animal species <strong>of</strong> India together<br />
with an inci sive knowlege <strong>of</strong> the native popula tion were<br />
undoubtedly instrumental in his repeated successes as a<br />
hunter, enabling him to <strong>of</strong>fer sound advice to younger followers.<br />
For example, he said men purporting to be shikaris were<br />
<strong>of</strong>ten frauds. Instead, he urged picking guides from amongst<br />
intelli gent villagers.<br />
10<br />
As to the selection <strong>of</strong> a proper rifle for taking large and<br />
sometimes dan gerous game, Stockley gave it as his opinion<br />
that the hunter should choose the most powerful rifle he<br />
could carry and shoot well, explaining that it wouldn't always<br />
be possible to pick one's shots in bush or jungle, especial ly if<br />
following-up a wounded animal. Further, under such conditions<br />
a heavy bullet might prove necessary to stop a charge<br />
at close quarters.<br />
English gunmakers did a thriving business between 1870 and<br />
1914, providing sporting arms for wealthy Britons and for<br />
military and civil servants at Empire posts. For the less wellheeled<br />
there were rugged falling-block single-shot rifles, and<br />
there were big double rifles for those willing and able to pay.<br />
Before 1900, both were blackpowder arms. Ammunition was<br />
sent out from England in sealed tins as protection from<br />
humidity and were opened only as needed.<br />
Stockley appears to have been able to afford some <strong>of</strong> the<br />
better rifles, even in his early days in India. He began with a<br />
battery composed <strong>of</strong> a Westley Richards .577 Black Powder<br />
Express and an 8-bore for a second rifle, both doubles. Of<br />
these he preferred the .577 because <strong>of</strong> its lighter recoil, but<br />
probably also because <strong>of</strong> a pair <strong>of</strong> unfortunate accidents<br />
suffered while using the 8-bore.<br />
In one instance, while cocking the 8-bore, a hammer slipped<br />
from under his thumb, causing the rifle to fire and driving the<br />
action lever back into his right hand between thumb and<br />
forefinger-"the lock-jaw place," as he called it because <strong>of</strong> the<br />
grave danger <strong>of</strong> tetanus from such an injury.<br />
Another episode with that hard kicking 8-bore saw both<br />
barrels fire together, he having cocked both hammers before<br />
firing. Whether this was due to inadequate sear contact, or<br />
simply caused by his finger slipping <strong>of</strong>f the front trigger onto<br />
the rear trigger under the jarring shock <strong>of</strong> recoil, he didn't<br />
say. Whichever it was, the simultaneous discharge <strong>of</strong> twenty<br />
drams <strong>of</strong> black powder driving a pair <strong>of</strong> two-ounce balls must<br />
have left a lasting impression!<br />
Thereafter, Stockley adopted a dou ble .500 Black Powder<br />
Express as a second rifle, using copper-tubed ex press bullets<br />
on the lighter non-dan gerous game, but also with satisfac -<br />
tory results on Himalayan brown bear.<br />
The .577 Express remained his fa vorite, especially for tiger. For<br />
those hunts he told <strong>of</strong> making crude night sights by sewing a<br />
band <strong>of</strong> white cloth around the barrels behind the front sight,<br />
and another close to the rear sight.<br />
With the arrival <strong>of</strong> smokeless pow der however, and still<br />
convinced <strong>of</strong> the superior effectiveness <strong>of</strong> the .577 bore, he<br />
obtained a new double rifle pro<strong>of</strong>ed for smokeless powder in<br />
that caliber, firing 650-grain s<strong>of</strong>t nose bullets loaded over 90<br />
grains <strong>of</strong> cordite. This second .577 appears to have been the<br />
Continue on page 11
The Story <strong>of</strong> a Rifle Continued . . .<br />
rifle chosen for use on his trips to Somaliland after lion, that<br />
country being then under the control <strong>of</strong> the government <strong>of</strong><br />
India and requiring the shortest travel to reach from the subcontinent.<br />
Whilst the abandoned 8-bore might have been<br />
stronger medicine for elephant and rhino, he found the .577<br />
to be a better lion gun.<br />
His method <strong>of</strong> hunting the big So mali cats was to locate a lion<br />
kill and from there take up the spoor on foot in day light,<br />
followed by horsemen whose job it was to gallop ahead,<br />
cutting <strong>of</strong>f the lion and (hopefully) bringing him to bay. Some<br />
<strong>of</strong> the maned heads thus obtained by Colonel Stockley were<br />
presented to the 16th Cavalry Officers Mess.<br />
The cordite .577 proved so successful for this hunting that<br />
Stockley ordered a new matched pair <strong>of</strong> .577 double rifles<br />
regulated for a heavier charge 750-grain solid or s<strong>of</strong>t-nosed<br />
bullets driven by 100 grains <strong>of</strong> cordite which he referred to as<br />
.577 H.V. (high velocity) rifles. So far as I was able to<br />
ascertain, these were his final pair <strong>of</strong> double rifles and the<br />
last <strong>of</strong> the big bores.<br />
As a military man he was naturally exposed to the ubiquitous<br />
.303, effective on men, but not so effective on big game animals.<br />
Stockley's distrust <strong>of</strong> the .303 shows through in a<br />
remark he made concerning the pursuit <strong>of</strong> Himalayan black<br />
bear, in which he said that he had decided to use "a good<br />
heavy bullet" (from the big double rifle) for the first shot, the<br />
.303 to be em ployed for a follow-up shot if neces sary.<br />
Still, the .303 <strong>of</strong>fered a trio <strong>of</strong> features which were bound to<br />
impress even the most devoted big bore shooters, namely a<br />
flatter trajectory, longer range and far lighter recoil. While<br />
Stockley's thoughts on these matters weren't recorded, some<br />
logical deductions can be made from his final ac quisition -<br />
a Westley Richards maga zine rifle in .318 Express.<br />
The designation ".318" for this car tridge is unfortunately misleading<br />
in that actual bullet and barrel groove diameters were<br />
.330 in. Furthermore, the .318 drove longer and heavier 250-<br />
grain solid or Westley Richards capped bullets at about the<br />
same velocity as a 174-grain from the .303, and some 350<br />
fps faster than the .303's 215-grain round nose. From these<br />
ballistic considerations he may have reasoned that with the<br />
.318 it was possible to combine the .303's advantages with<br />
the heavier bullets in which he placed so much faith.<br />
Introduced sometime around 1910 to provide a general purpose<br />
medium bore cartridge suited for use in standard length<br />
bolt actions, the .318 had become enormously popular in<br />
Africa, possibly the most popular <strong>of</strong> all mediums. Offering an<br />
adequately flat trajectory, the long, straight-sided 250- grain<br />
solids gave deep penetration, earning for the caliber a quite<br />
marvelous reputation. For thin-skinned animals there was<br />
also the special Westley Richards "capped" bullet-a 250-<br />
grain copper-capped round-nose that provided expansion for<br />
lion and gained a creditable reputation when properly used,<br />
plus a 180-grain pointed cap hollow-nose fit only for non<br />
dangerous lighter game.<br />
With his long years <strong>of</strong> experience and preference for heavy<br />
bullets, it is most unlikely that Colonel Stockley experimented<br />
with these lighter bul lets, but his faith in Westley Richards<br />
products may have influenced him to rely overmuch on the<br />
250- grain capped bullets. Following service in command <strong>of</strong><br />
the 21st Northumberland Fusiliers during the Great War <strong>of</strong><br />
1914-18, he had moved to East Africa, still pursuing his<br />
favorite sport <strong>of</strong> big game hunting.<br />
No details are available as to the type <strong>of</strong> bullet Stockley was<br />
using in his .318 on that fateful day in early March, 1921,<br />
when he undertook to shoot a Ugandan buffalo. Nor do we<br />
know why he used that rifle on such heavy and dangerous<br />
game. Had he abandoned the .577s entirely, or were they<br />
simply not at hand when he needed them? Again, we don't<br />
know.<br />
What is known is that he failed to stop the buffalo's charge,<br />
and the ani mal got to him with fatal results. The London<br />
Times in its edition <strong>of</strong> April 21, 1921, announced the death <strong>of</strong><br />
Colonel Vesey Mangles Stockley, killed in Uganda by a<br />
buffalo and buried on March 9th in the King's Af rican Rifles<br />
Cemetery at Kampala. He had written Big Game Shooting in<br />
India, Burma and Somaliland, pub lished in 1913.<br />
For the colonel, life had ended. Not so for his rifle which<br />
stands today in this writer's gun cabinet, the initials "VMS"<br />
still clearly visible in the tarnished silver oval stock plate. The<br />
bluing is much the worse for wear, but the rifle is otherwise<br />
undamaged ex cept for the usual stock dings. And the old<br />
Westley Richards continues to participate in hunts.<br />
Where it was and what it did during the three decades<br />
following Colonel Stockley's death, I've been unable to learn.<br />
Undoubtedly, viewing its badly worn bore, it saw much use,<br />
suffering the usual effects <strong>of</strong> cordite powder and corrosive<br />
primers, so it is interesting to speculate on the variety <strong>of</strong> game<br />
it may have taken.<br />
Some way or other, the old rifle found its way to Kenya, and<br />
there we pick up its trail when in the course <strong>of</strong> the Mau Mau<br />
insurrection <strong>of</strong> 1952-56 it was swept up by the British<br />
au thorities, crated and shipped out <strong>of</strong> the country. I found it<br />
languishing amongst a group <strong>of</strong> second-hand rifles in a dealer's<br />
racks during the 1960s, forlorn in appearance but as<br />
sound mechanically as the day it left London. The extra large<br />
band <strong>of</strong> steel surrounding the receiver ring identified it as a<br />
takedown- the first such I had encountered in a bolt actionand<br />
the engraved inscriptions were equally interesting.<br />
(EDITOR'S NOTE: From the same dealer, I bet, I got a Charles<br />
Jefferies .256 Mannlicher magazine rifle. I still have it. KW.)<br />
Continue on page <strong>12</strong><br />
11
The Story <strong>of</strong> a Rifle Continued . . .<br />
On the left side <strong>of</strong> the out-sized re ceiver ring are the words<br />
"Westley Richards .318 Accelerated Express," and just<br />
forward <strong>of</strong> that on the barrel breech section, "Square<br />
Shouldered Case Patents 2762-4661 II." Test firing the rifle<br />
with British Kynoch cartridges, I soon found out what was<br />
meant by "square-shouldered case." The cases emerged with<br />
the sharpest, almost right-angled, shoulders ever seen on any<br />
cartridge, factory or wildcat.<br />
A parade <strong>of</strong> five open V-sights from a standing leaf marked<br />
100-yds, fol lowed by four folding leaves successively<br />
identified to 500 yards, are mounted on a quarter-rib in best<br />
Eng lish fashion. Up front, a large squarish block contains a<br />
standard steel bead and a folding ivory-faced night sight.<br />
Barrel length is 26 inches, which somehow doesn't seem at<br />
all clumsy on this rifle.<br />
My first move after test-firing was to have my old gunsmith<br />
friend Floyd Butler (now retired) refinish the stock, a job he<br />
executed with consummate skill, leaving the rifle as originally<br />
finished with subdued patina over the French walnut graining.<br />
No rebluing was allowed as it was desired to retain the<br />
evidence <strong>of</strong> its many years <strong>of</strong> service. Of course, that didn't<br />
help the way its worn rifling tended sometimes to scatter<br />
shots, so the barreled action was shipped <strong>of</strong>f to re-boring<br />
specialist J.W. Van Patten in Pennsylvania with instructions to<br />
re-bore the barrel to .35-caliber, but without altering that<br />
unusual square-shouldered chamber except, <strong>of</strong> course, to<br />
open the neck area to accommodate .358 in. bullets.<br />
lt was an altogether pleasing resto ration, made the more so<br />
when I dis covered that it would now group five shots in two<br />
inches or less at 100 yards, and that cases could readily be<br />
formed from .30-06 brass, thereby rid ding me <strong>of</strong> the necessity<br />
to use Berdan primers.<br />
After some experimentation, I found that 250-grain Hornady<br />
round nose s<strong>of</strong>t points loaded over 54 grains <strong>of</strong> IMR-4320<br />
gave me the accuracy I sought with close to original ballis tics;<br />
that is, a 250-grain bullet at 2450 fps. It is, if you will, an<br />
Anglicized version <strong>of</strong> our respected .35 Whelen cartridge, but<br />
with squared shoulder.<br />
When an opportunity arose to hunt wild boar at the Hall<br />
Brothers Lodge in Georgia while attending the I982 Shot<br />
Show in Atlanta, the Westley .35/318 was the rifle I selected<br />
to take along. I wanted a rifle that was both powerful enough<br />
to penetrate from any angle, and yet capable <strong>of</strong> being<br />
packed in a standard suitcase. I was confident<br />
I could count on its meeting the first<br />
requirement, and its take down feature<br />
admirably took care <strong>of</strong> the second.<br />
ways <strong>of</strong> that old rice plantation below Savannah, and I<br />
evinced a desire to try stalking a boar rather than shooting<br />
from a stand or hunting with the pack. I hoped for a more<br />
challenging shot. Jack Douglas, my guide, couldn't have<br />
been more understanding or accommodating, and I seriously<br />
question whether any boar hunting guide knows his game<br />
and their habits better.<br />
By the end <strong>of</strong> the second day he had located for me an old<br />
settler who was obviously the patriarch boar, driving <strong>of</strong>f<br />
younger rivals with raking tusks. We immediately named him<br />
"Old Ugly."<br />
Misjudging the range in the fading late afternoon light and<br />
turning up wrong sight leaf, my first shot merely creased the<br />
back <strong>of</strong> the feeding boar, and he broke into a flat-out run.<br />
Here was the shot I had hoped for, and with the correct sight<br />
leaf now turned up, I swung ahead <strong>of</strong> the running boar and<br />
touched <strong>of</strong>f the shot.<br />
If you've never heard a fatally hit boar bellow and seen him<br />
switch ends in midair and collapse in a heap, you can't know<br />
how spectacular it can be!<br />
The 250-grain Hornady round-nose s<strong>of</strong>t point penetrated<br />
clear through, smashing both shoulders, tearing up the tops<br />
<strong>of</strong> the lungs, and expanding to leave an exit hole resulting in<br />
an enormous and very rapid loss <strong>of</strong> blood for a clean, quick<br />
kill. This was the sort <strong>of</strong> performance which earned the .318<br />
its great reputation; I was happy the new bore played up to<br />
standard.<br />
Measuring a full six feet in length with little or no fat, Old Ugly<br />
was judged worthy <strong>of</strong> a head mount, cre ated by taxidermist<br />
Charles Douglas.<br />
As I write this, the boar looks down on me<br />
from my gunroom wall with baleful<br />
glare and exposed tusks, a memento<br />
<strong>of</strong> yet another chapter in the life story<br />
<strong>of</strong> a grand<br />
old rifle. ◆<br />
By Ken Waters<br />
Reprinted by permission<br />
<strong>of</strong> <strong>Gun</strong> Digest ®<br />
It was freezing cold in Georgia that<br />
January, with skim ice on the water<br />
<strong>12</strong>
Program Guide Continued . . .<br />
Project <strong>of</strong> the Month<br />
We don’t feature a project in every issue <strong>of</strong> <strong>Gun</strong>Tech because<br />
we present our projects the “AGI way” (not like the rest <strong>of</strong> the<br />
DIY channels that only show highlights <strong>of</strong> the process and<br />
leave out so much important material that only a pro could<br />
get what they needed to actually DO the project!!). Of course<br />
if you’ve been watching <strong>Gun</strong>Tech for any length <strong>of</strong> time you<br />
KNOW what the “AGI way” is: we take you through the<br />
ENTIRE PROCESS step-by-step. We show you EVERY step in<br />
the process so you can easily follow along. This means that<br />
the projects are usually pretty long.<br />
Even when we make <strong>Gun</strong>Tech WAY MORE than 2 hours in<br />
length, we STILL have to cut back on some <strong>of</strong> the other features<br />
in order to make room for a project. Like any good magazine,<br />
we strive to include as MANY different things as possible.<br />
In order to do that, we need to run some segments<br />
(such as projects) on an intermittent basis.<br />
In this month’s project, Jack replaces the recoil pad on one <strong>of</strong><br />
Gene Kelly’s guns (and BOY did it NEED it!). He shows you a<br />
method that is easy for ANYONE to do, even if you have NO<br />
previous experience. You only need one small, affordable fixture<br />
and your trusty belt sander to get pr<strong>of</strong>essional quality<br />
results. This is the perfect project to do over the holidays<br />
because it won’t take very long and doesn’t cost much either.<br />
Firearms Evaluation<br />
Last month we told you that the December issue would feature<br />
the evaluation <strong>of</strong> the Taurus TCP compact .380 pistol.<br />
Unfortunately the December issue <strong>of</strong> <strong>Gun</strong>Tech was so full that<br />
Keith just couldn’t fit any more under the Christmas tree! But<br />
don’t be discouraged, the TCP evaluation will be featured in<br />
the January issue <strong>of</strong> <strong>Gun</strong>Tech ALONG WITH an evaluation <strong>of</strong><br />
the Ruger LC9, “Happy New Year” indeed!<br />
H&K PSP (P7)<br />
Disassembly/Reassembly Course<br />
O.K., hang onto your hats folks! Get ready for an<br />
exciting thrill ride from start to finish as Ken takes<br />
you through the twists and turns that are the Heckler<br />
and Koch P-7, “Squeeze-cocker” pistol!! This is one truly<br />
UNIQUE design and <strong>of</strong> course since it’s made by the folks at<br />
H&K, it’s made VERY well. That being said, it’s pretty confusing<br />
looking and intimidating when you first take the covers<br />
<strong>of</strong>f, but have no fear! Ken guides you seamlessly and easily<br />
through each step taking all the mystery and stress out <strong>of</strong> the<br />
complete disassembly and reassembly <strong>of</strong> this COOL gun!<br />
We hope you enjoy this Disassembly/Reassembly Course and<br />
ALL <strong>of</strong> this issue <strong>of</strong> <strong>Gun</strong>Tech as part <strong>of</strong> YOUR holiday celebration<br />
with friends and family! We here at <strong>GCA</strong> headquarters<br />
wish you the MERRIEST <strong>of</strong> Christmases and the Happiest <strong>of</strong><br />
New Years until we see you next month . . . in <strong>Gun</strong>Tech!<br />
◆<br />
A note from Hot Brass<br />
Editor Lenée Landis<br />
Well, I’m pretty sure most <strong>of</strong> you know<br />
me… I am pleased to have this opportunity<br />
to run into the <strong>Gun</strong>Tech room and give a shout out to the<br />
audience. I admire your ability to hone in on detailed information<br />
and have the commitment to your work that you have.<br />
At the end <strong>of</strong> the year, so many people take a look at what<br />
was, and there is certainly plenty to do a retrospective, but I<br />
feel like looking ahead to what can be, might be, and dare I<br />
say it? (but, <strong>of</strong> course), what will be!<br />
Okay, better to find out from the experts: what does that<br />
shooting virus, or the gunsmith bug feel like when you come<br />
into contact? I think I may have been bitten. Yep, I am serious.<br />
I noticed suddenly I demanded my own range bag—I<br />
mean really? How have I shared one all this time and suddenly,<br />
primadonna-ish, I look askance at where things are<br />
located in THE range bag and vow to get my own?<br />
Next, yes, I started looking at Boyd’s <strong>Gun</strong>stocks. I would like<br />
to fashion my own 10/22 . . . and it is not only me! I can name<br />
a young lady within a stone’s throw at AGI who is planning to<br />
build a 1911 with the help <strong>of</strong> Gene Shuey’s videos and her<br />
father. As for me, I keep sneaking peaks at the SS Evolution<br />
with a chic ambidextrous thumbhole stock . . . hmmm, here it<br />
is in Applejack:<br />
So many choices! In Hot Brass, you’ll<br />
see my article about the Ruger Rimfire Series. We had the<br />
great pleasure to shoot with the California Wheelburners. The<br />
fun <strong>of</strong> it all? Competitors from young to seasoned are able to<br />
get together and engage in the time honored range tradition<br />
<strong>of</strong> storytelling and shooting.<br />
We will be at the SHOT Show next month, January 17-20, 20<strong>12</strong><br />
at the Sands Convention Center in Las Vegas. As you may<br />
know, this is an industry event not open to the general public.<br />
<strong>Gun</strong>smiths welcome!! If you are there, please stop and<br />
say hi at Booth #2110 in the General Hunting and Shooting<br />
Section. Scheduled to be present: The Genes - Kelly and<br />
Shuey, Bob Dunlap, Ken Brooks, Fred Zeglin, and Jack Landis<br />
plus Kerry Earnhardt to sign autographs and our illustrious<br />
video crews to capture the info you’d be looking for if you<br />
were in attendance and had eight days to soak it in! Here’s<br />
one <strong>of</strong> Robert Dunn’s loves from last show:<br />
Engraved Perazzi Shotgun<br />
Photo courtesy <strong>of</strong> Robert Dunn<br />
We will certainly endeavor<br />
to get around the<br />
whole SHOT Show and<br />
collect info and photos to bring to you. It’s a hard job, but we<br />
have volunteered. Robert’s feet already hurt. ◆<br />
13
Resource Directory Issue #68<br />
<strong>Gun</strong> <strong>Club</strong> <strong>of</strong> <strong>America</strong><br />
351 Second Street, Napa, CA 94559<br />
(800) 435-4262<br />
www.<strong>Gun</strong><strong>Club</strong><strong>of</strong><strong>America</strong>.com<br />
Ventco Inc.<br />
Shooters Choice Products<br />
15050 Berkshire Industrial Pkwy<br />
Middlefield, OH, 44062<br />
(440) 834-8888<br />
www.shooters-choice.com<br />
ROGCO<br />
Har-Bar Mini-14 Barrel Stabilizer<br />
P.O. Box 070533<br />
Milwaukee, Wisconsin 53207<br />
(414) 755-9033<br />
www.rogco.biz<br />
Duluth Pack<br />
Gransfors Mini-Belt Axe<br />
1610 West Superior Street, Duluth, MN 55806<br />
(800) 777-4439<br />
www.duluthpack.com<br />
The Shooters Box<br />
DPM Systems Glock “Glass Breaker”<br />
Magazine Floorplate<br />
53 Broadway, Malden, MA 02148<br />
(781) 321-9899<br />
www.theshootersbox.com<br />
Samson Manufacturing Corp.<br />
SPD Sig Pistol Tool<br />
110 Christian Lane, Whately, MA 01373<br />
(413) 665-1162<br />
www.samson-mfg.com<br />
4D Reamer Rentals<br />
Chambering Reamers, Bolt Handles,<br />
Extensive Line <strong>of</strong> Custom <strong>Gun</strong>smithing Tools & Parts<br />
432 East Idaho St., Suite C420<br />
Kalispell, MT 59901<br />
(406) 752-2520<br />
www.4-dproducts.com<br />
14<br />
Joe Alesia AKA "Lefty Longridge"<br />
Next Level Shooting Clinics – Cowboy, IPSC<br />
(661) 373-2709<br />
www.deadwoodboys.org<br />
Email: leftylongridge@ca.rr.com<br />
Holland Shooters Supply<br />
Superb Riflesmithing/Custom Rifles,<br />
Shooters’ Supplies & Accessories<br />
Long Range Shooting School<br />
711 Avenue "H", Powers, OR 97466<br />
(541) 439-5155<br />
www.hollandguns.com<br />
Dealer Showroom – John Bush<br />
Huge Stock <strong>of</strong> Military <strong>Gun</strong> Parts, Accessories<br />
and Books from the 20th Century<br />
553 Market Street<br />
Klamath Falls, OR 97601<br />
(541) 882-4249<br />
Email: Johnd.bush@yahoo.com<br />
Shuey Custom<br />
Gene Shuey, Master <strong>Gun</strong>smith<br />
Ultra Custom 1911 & Glock Pistols<br />
21 Cygnet Dr. #200, Carson City, NV 89706<br />
(775) 246-7662<br />
www.shueycustom.com<br />
PISCO <strong>Gun</strong>smithing<br />
Bob Dunlap/Ken Brooks – <strong>Gun</strong>smithing<br />
1455B N. Hemlock Street<br />
Coquille, OR 97423<br />
(541) 396-5558<br />
www.piscogunsmithing.com<br />
AGI<br />
The <strong>America</strong>n <strong>Gun</strong>smithing Institute<br />
Pr<strong>of</strong>essional <strong>Gun</strong>smithing Courses<br />
351 Second Street, Napa, CA 94559<br />
(800) 797-0867<br />
www.<strong>America</strong>n<strong>Gun</strong>smith.com<br />
www.<strong>America</strong>n<strong>Gun</strong>smithingInstitute.org
Producer’s<br />
Cut<br />
by Keith Hezmalhalch<br />
AGI/<strong>GCA</strong> Executive<br />
Video Producer and<br />
New Age Sage<br />
Our Esteemed Executive Producer is on assignment and<br />
unavailable to write his monthly column. In his honor we are<br />
submitting the following for those that are pining for new<br />
recipes. It’s not his but we will pretend that it is. Editor<br />
Glock 17 Continued . . .<br />
will result in excessive pressure build up in the gun. Full metal<br />
jacket rounds in 9 mm should be used because hollow points<br />
will expand and cause dangerous pressure levels. There<br />
should be no air present in the pistol as this will also cause<br />
high pressure issues. Keep in mind that sound pressure levels<br />
are much higher underwater. Just because you can’t hear<br />
your friends yelling at you while in a pool doesn’t mean that<br />
you will not suffer hearing loss if you shoot your Glock with<br />
both it and your head underwater!<br />
The Best Way to Cook Corn<br />
on the Cob for a Crowd?<br />
It's Cooler Corn!<br />
Am I the only person who hasn't heard <strong>of</strong> "cooler corn"???<br />
As an obsessive food nerd, you'd expect that I would have at<br />
least heard <strong>of</strong> it, but over the weekend I was blind-sided by<br />
the simple genius <strong>of</strong> this method for cooking loads <strong>of</strong> corn on<br />
the cob perfectly.<br />
I was tipped to it while visiting my family in Maine. Short story:<br />
We like corn on the cob. And with eight adults at the table,<br />
that means a couple <strong>of</strong> dozen ears. We would have used the<br />
lobster pot to cook them all, but the lobster pot was busy<br />
steaming lobster.<br />
Then my sister, a capable Maine cook with years <strong>of</strong> camping<br />
experience, says "let's do cooler corn!" Before I can ask "what<br />
the heck is cooler corn?" a Coleman cooler appears from the<br />
garage, is wiped clean, then filled with the shucked ears.<br />
Next, two kettles full <strong>of</strong> boiling water are poured over the corn<br />
and the top closed.<br />
Then nothing.<br />
When we sat down to dinner 30 minutes later and opened it,<br />
the corn was perfectly cooked. My mind was blown. And I'm<br />
told that the corn will remain at the perfect level <strong>of</strong> doneness<br />
for a couple <strong>of</strong> hours.<br />
Turns out, Cooler Corn is pretty well known among the outdoorsyset.<br />
But, for those <strong>of</strong> us who avoid tents as much as<br />
possible, it's perfect for large barbecues and way less <strong>of</strong> a<br />
mess than grilling.<br />
In fact, I may even buy another cooler just so I'm ready for<br />
next summer. Now that I'm in the know. ◆<br />
Glock 17 field stripped to its 5 main component.<br />
Field stripping the pistol is as easy as it gets. Make sure the<br />
weapon is unloaded, release the magazine, pull the trigger,<br />
move slide back about an 1/8", pull down the take down tabs<br />
on both sides <strong>of</strong> the frame and then ease the slide forward <strong>of</strong>f<br />
<strong>of</strong> the frame. Next, the recoil guide rod and spring can be<br />
taken <strong>of</strong>f by pushing slightly forward and up. The barrel can<br />
be removed from the slide by lifting it up from the rear.<br />
At this point the gun is ready to be cleaned, lightly lubricated<br />
and put back together in the reverse order <strong>of</strong> the field stripping.<br />
Maintenance is that quick and easy!<br />
The late model Glock 17 has added a light rail for quick<br />
mounting <strong>of</strong> a tactical light system, a welcome addition. There<br />
are many after market products available for Glock pistols,<br />
such as various front and rear sights and many different types<br />
<strong>of</strong> laser sighting systems as well. Another thing I like is that<br />
there is a hole in the lower part <strong>of</strong> the grip that will allow a<br />
lanyard to be attached to the pistol. This allows you to drop<br />
the weapon safely and switch to a rifle quickly.<br />
Right out <strong>of</strong> the box, the Glock 17 is a safe and accurate pistol.<br />
This firearm is another weapon that has made a dramatic<br />
impact on the history <strong>of</strong> firearms and will be in constant use<br />
for years to come. This pistol has become a “classic” design<br />
since it was first manufactured in the early 1980s. It is still a<br />
proven and reliable “work horse” in the 21st century. ◆<br />
15
Disassembly/Reassembly Video Index<br />
Firearm . . . . . . . . . . . . . . . . . . . . . . . . . <strong>Gun</strong>Tech Volume #<br />
19<strong>12</strong> Steyr Auto-Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2<br />
Savage 99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3<br />
Russian & Swede Nagant Revolvers. . . . . . . . . . . . . . . . . . . . . 4<br />
AMT Automag II Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5<br />
Mauser C-96 Broomhandle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6<br />
Ruger Model 96 Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6<br />
Mosin-Nagant Rifle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7<br />
1874 Sharps Rifle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8<br />
Russian Tokarev Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8<br />
Colt Python Revolver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9<br />
Remington 740/742 Rifles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10<br />
Browning Semi-Auto .22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11<br />
Winchester Model 70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <strong>12</strong><br />
Desert Eagle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13<br />
1863 Remington Revolver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14<br />
Ithaca Model 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15<br />
Dan Wesson Revolver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16<br />
Tech 9 Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17<br />
1938 Carcano Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18<br />
Firestar Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19<br />
Mannlicher/Steyr 1895 Straight Pull Carbine . . . . . . . . . . . . 20<br />
Mac 11 Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21<br />
MAB Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22<br />
Astra 400 Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23<br />
Sako Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24<br />
Webley Auto Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25<br />
Winchester ‘87 Shotgun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26<br />
S&W 41 Auto-Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27<br />
Winchester 1885 “Low Wall” Rifle. . . . . . . . . . . . . . . . . . . . . . 28<br />
US Revolver Co. Top Break Pistol . . . . . . . . . . . . . . . . . . . . . . 29<br />
Charles Daly Shotgun. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30<br />
Colt 2000 Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31<br />
Winchester Model 62 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32<br />
Thompson Contender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33<br />
Firearm . . . . . . . . . . . . . . . . . . . . . . . . . <strong>Gun</strong>Tech Volume #<br />
1934 Beretta Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34<br />
Weatherby Mark V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35<br />
Flintlock/Percussion Lock Mechanism. . . . . . . . . . . . . . . . . . 36<br />
SIG P-230 Pistol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37<br />
Browning A-Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38<br />
Winchester Model 88 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39<br />
Taurus 24/7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40<br />
Stevens Favorite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41<br />
SIG PRO Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42<br />
Browning Citori Shotgun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43<br />
Springfield Armory M1-A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44<br />
Hi-Point Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45<br />
Mossberg 500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46<br />
Walther P-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47<br />
Hi-Point Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48<br />
Beretta Al 391 Urika Shotgun . . . . . . . . . . . . . . . . . . . . . . . . . 49<br />
Savage Model 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50<br />
NAA Mini-Revolver / Crickett .22 Training Rifle . . . . . . . . . . 51<br />
Remington 1100/1187 Shotgun. . . . . . . . . . . . . . . . . . . . . . . . 52<br />
Browning BAR Semi-Auto Rifle. . . . . . . . . . . . . . . . . . . . . . . . 53<br />
Beretta 21 Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54<br />
Ruger LCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55<br />
Ruger #1 Single-Shot Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . 56<br />
Walther P22 Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57<br />
Winchester Model 77 Rifle. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58<br />
S&W Double Action Revolver. . . . . . . . . . . . . . . . . . . . . . . . . . 59<br />
Sako Model 4 Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60<br />
Walther P99 Pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61<br />
Browning Cynergy Shotgun. . . . . . . . . . . . . . . . . . . . . . . . . . . 62<br />
Charter Arms .44 Bulldog Revolver . . . . . . . . . . . . . . . . . . . . 63<br />
Steyr M9 Pistol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64<br />
1907 Winchester Autoloader . . . . . . . . . . . . . . . . . . . . . . . . . . 65<br />
Smith & Wesson Bodyguard 380 . . . . . . . . . . . . . . . . . . . . . . 66<br />
1905 Ross Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67<br />
©<strong>GCA</strong>, 351 Second Street, Napa, CA 94559, 800-435-GCOA (4262), Fax 707-253-2135, www.<strong>Gun</strong><strong>Club</strong>Of<strong>America</strong>.com