Physical-Layer RF Design of Dual-Band 802.11 WLAN - WOCC ...

More documents

Recommendations

Info

5.2 GHz 64QAM 54 Mbps: EVM=4.05 % ( -60dBm received power) CCU-EE Wireless Communication Lab 54
EVM Measurement by HP89441 RX(with IF IQ modem) Dynamic Range Test 40 EVM(%) 30 25 20 15 10 5.2 GHz <strong>Band</strong> EVM Measurement by HP89441 BPSK & Data Rate: 6Mbits/s BPSK & Data Rate: 9Mbits/s QPSK & Data Rate: 12Mbits/s QPSK & Data Rate: 18Mbits/s 16QAM & Data Rate: 24Mbits/s 16QAM & Data Rate: 36Mbits/s 65 dB dynamic range for 17% EVM EVM(%) 35 30 25 20 15 BPSK & Data Rate: 6Mbits/s BPSK & Data Rate: 9Mbits/s QPSK & Data Rate: 12Mbits/s QPSK & Data Rate: 18Mbits/s 16QAM & Data Rate: 24Mbits/s 16QAM & Data Rate: 36Mbits/s 2.4 GHz <strong>Band</strong> 70 dB dynamic range for 17% EVM 5 10 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 CCU-EE Wireless Communication Lab Input Power(dBm) 55 5 -90 0 -80 -70 -60 -50 -40 -30 -20 -10 Input Power(dBm)
Page 1 and 2:
Physical-Layer RF Design of Dual-Ba
Page 3 and 4: I. Motivation of the Research How d
Page 5 and 6: (I) Operation Frequency Band and ch
Page 7 and 8: Straight-forward architecture: Two
Page 9 and 10: single PLL and VCO generates all RF
Page 11 and 12: PLL Loop filter design Loop filter
Page 13 and 14: (1) Concurrent Dual-Band LNA- Circu
Page 15 and 16: (3) Dual-Band Filter Second-order S
Page 17 and 18: (II) Transmit power levels and spec
Page 19 and 20: B. Transmit Spectrum Mask IEEE802.1
Page 21 and 22: Example: 2.4 GHz Class-AB PA Freque
Page 23 and 24: (III) Allowed constellation error a
Page 25 and 26: Related to baseband IQ Mixer, RF mi
Page 27 and 28: B. Receiver Maximum Input level IEE
Page 29 and 30: (V) Adjacent Channel Rejection A. A
Page 31 and 32: IEEE802.11g: 19.5 ERP operation spe
Page 33 and 34: For example: Desired Signal : -79 d
Page 35 and 36: How do we achieve? CCU-EE Wireless
Page 37 and 38: (A) RF Transceiver Architecture and
Page 39 and 40: (B) Transmitter Power Budget 40 IEE
Page 41 and 42: (C) Receiver Gain Budget IEEE802.11
Page 43 and 44: (1) Concurrent Dual-Band LNA- Circu
Page 45 and 46: (2) Dual-Band PA dB 30 20 10 0 -10
Page 47 and 48: (4) Dual-Band Switch 0 -2
Page 49 and 50: 5.6 GHz 0.18um CMOS quadrature VCO
Page 51 and 52: -97.8 dBc/Hz phase noise at 100 kHz
Page 53: (I) 2.4/5.2-GHz RF receiver test 2.
Page 57 and 58: 5.2 GHz 64QAM 54 Mbps: EVM=4.46 %=-
Page 59 and 60: • Examine 802.11a/b/g RF specific
show all

Physical-Layer RF Design of Dual-Band 802.11 WLAN - WOCC ...

Create successful ePaper yourself

Delete template?

Save as template?