15.11.2014 Views

Manual - Robot MarketPlace

Manual - Robot MarketPlace

Manual - Robot MarketPlace

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

EN<br />

USING TRANSMITTER<br />

Antenna<br />

The transmitter antenna bends and turns at the hinge (A) and only bends<br />

and turns to the front of the transmitter. The antenna cannot point to the<br />

back of the transmitter. Turn antenna tip to point away from the model<br />

and ground. Signals transmit strongest from the antenna shaft, not the tip.<br />

WARNING: Do not pick up the<br />

transmitter by the antenna. Do not<br />

alter or put weight on the antenna. Damage<br />

to antenna parts can decrease transmitter<br />

signal strength, which can result in loss of<br />

model control, injury or property damage.<br />

A<br />

Main Screen<br />

A Transmitter Battery Charge Level<br />

B Model Memory<br />

C Model Name<br />

D Model Type<br />

E Elevator Trim (Mode 2)<br />

F Time Count<br />

G Aileron Trim<br />

H Time Count Direction<br />

I Rudder Trim<br />

J Transmitter Battery Charge Amount<br />

(an alarm sounds and the screen flashes<br />

when battery charge gets down to 4.1V.)<br />

K Throttle Trim (Mode 2)<br />

A<br />

I<br />

K<br />

E<br />

G<br />

B C D<br />

MDL6<br />

MUSTANG<br />

K<br />

5.0V<br />

DN06:00<br />

E<br />

Warning screens<br />

Warning Screen for Throttle Hold/Stunt Mode<br />

If the Model Type is HELI and the F MODE or TH HOLD switch<br />

are in the 1 position when the transmitter is powered on, the<br />

alarm will sound. When the F MODE switch or THROTTLE HOLD<br />

switch are on, an alarm sounds and warning shows on the LCD<br />

screen. When all switches are moved to position 0, the display<br />

returns to normal and the alarm stops.<br />

J<br />

I<br />

H<br />

G<br />

Warning Screen for Low Transmitter Batteries<br />

When the transmitter is powered on with low battery power (at<br />

4.1-volts or less), a warning sounds and the screen flashes with<br />

text to prevent use of the transmitter with low batteries. Power<br />

off the transmitter and replace batteries to stop the sound and<br />

flashing screen.<br />

F<br />

8 SPEKTRUM DX6i • RADIO INSTRUCTION MANUAL

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!