Catalogue for general industrial applications - Krafft
Catalogue for general industrial applications - Krafft
Catalogue for general industrial applications - Krafft
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SILKRON range<br />
One component (RTV) high quality silicones with high modulus and<br />
solvent free. The SILKRON HT Acetoxy and SILKRON SILENE are<br />
homologated <strong>for</strong> Food Contact. All are F.I.P.G. (Form-In-Place-Gaskets).<br />
High<br />
temperature:<br />
HT<br />
SILENE<br />
Neutral<br />
cure:<br />
KS NEUTRAL<br />
HT NEUTRAL<br />
Acetoxy<br />
cure:<br />
KS<br />
HT<br />
SPG<br />
SILENE<br />
<br />
One component (RTV) polyurethane with different<br />
modulus and adhesion depending on the support.<br />
POLIFLEX PLUS<br />
POLIFLEX PRO (Hybrid)<br />
STANDARD K-1<br />
Two-component polyurethane to glue important<br />
surfaces or <strong>for</strong> structural adhesion:<br />
PU 458<br />
NOVATTANE 3100<br />
<br />
New technology: One component (RTV) adhesive /sealant (hybrid<br />
of polyurethane and silicone). UV resistant, paintable, applicable<br />
on slightly wet surfaces. Can be transparent like crystal. With<br />
different modulus and flexibility. The H-200 has a very high initial<br />
tack (green strength).<br />
SILKRON POLYMER H-75<br />
SILKRON POLYMER H-100<br />
SILKRON POLYMER H-200<br />
POLIFLEX PRO<br />
<br />
<br />
<br />
Ranges with different viscosities<br />
• FH-EP (DIN / ISO: HL / HM)<br />
• FHV (DIN / ISO: HLP / HM)<br />
• HIDROP HV (DIN HLVP-D)<br />
• HIDROP P (DIN HVLP, POCLAIN)<br />
• KROIL BASELA CP (DIN: VCL – VDL;<br />
ISO: DAB – DAG – DAM)<br />
• KROIL BASELA G (DIN: HLP/CLP;<br />
ISO: HM/HG).<br />
<br />
<br />
• LHM (ISO 7308)<br />
• ATF-C3/46 and C3/100<br />
(SAE 10W and SAE 30,<br />
Allison C3; GM: A sub A)<br />
• ATF D.21247 (SAE 10W;<br />
Dexron II; Allison C-4)<br />
• ATF SYNTHETIC D3<br />
(SAE 10W; Dexron III)<br />
• KROIL TRACTOR TU<br />
<br />
<br />
Ranges with different<br />
viscosities<br />
• KROIL BASELA<br />
(Mineral; DIN CLP; ISO CKC)<br />
• KROIL SINTLUBE<br />
(Synthetic; DIN CLP; ISO CKC)<br />
• SUPER KROIL MR<br />
(Non-Newtonian Gel)<br />
<br />
For high temperature:<br />
• KROIL SINTLUBE 2000<br />
• LKC NEW<br />
• LUBECER<br />
<br />
Monograde or Multigrade,<br />
Diesel or Gasoline, Mineral or<br />
Synthetic, Passenger Cars or<br />
Heavy Duty, API or ACEA<br />
Standard, different SAE<br />
viscosities
NAME<br />
NLGI<br />
THICKENER<br />
OIL ADDITIVE<br />
WORKING WATER PRESSURE<br />
APPLICATIONS<br />
TEMP. °C RESIST. RESIST.<br />
KGP-2/P<br />
0-00<br />
Al Complex<br />
Mineral<br />
Graphite, EP<br />
-20 to 150<br />
***<br />
***<br />
Open gear adhesive grease <strong>for</strong> spray application: service (ISO VG 1000).<br />
KGP-2/P-E<br />
0-00<br />
Al Complex<br />
Mineral<br />
Gr, MoS 2 , EP<br />
-20 to 150<br />
***<br />
***<br />
Open gear adhesive grease <strong>for</strong> spray application: running in.<br />
KGP-2/PLEX 1500<br />
0-00<br />
Al Complex<br />
Semi synth<br />
Graphite, EP<br />
5 to 150<br />
***<br />
***<br />
Open gear adhesive grease <strong>for</strong> spray application: service (ISO VG 2500).<br />
KGP-2/M<br />
0-00<br />
-<br />
Semi synth<br />
GR, C, EP<br />
-20 to 150<br />
***<br />
***<br />
Open gear adhesive grease <strong>for</strong> manual application.<br />
KGP-2/F<br />
00<br />
Al Complex<br />
Semi synth<br />
Graphite, EP<br />
5 to 150<br />
***<br />
***<br />
Open gear adhesive grease <strong>for</strong> dip lubrication.<br />
BASELA 12 PG<br />
1<br />
Inorganic<br />
PAG<br />
MoS 2 , AW, C<br />
-30 to 200<br />
***<br />
***<br />
Multipurpose at high temperature, non melting.<br />
SITELA 2<br />
1-2<br />
Polyurea<br />
Mineral<br />
AW, O, C<br />
-25 to 170<br />
***<br />
***<br />
High per<strong>for</strong>mance multipurpose; continuous steel casting bearings.<br />
Q3-4612<br />
-<br />
-<br />
Mineral<br />
Gr, MoS 2<br />
up to 450<br />
*<br />
****<br />
Pre-treatment paste <strong>for</strong> gear or <strong>for</strong> assembly.<br />
ANTISEIZE 907<br />
-<br />
-<br />
Semi synth<br />
Copper<br />
-<br />
***<br />
***<br />
Paste <strong>for</strong> threaded connections (assembly).<br />
DRILL GREASE<br />
2<br />
Li<br />
Mineral<br />
Zinc, AW, C<br />
-25 to 115<br />
***<br />
***<br />
Paste <strong>for</strong> threaded connections of rods drilling; electricity conductive.<br />
K 165 X<br />
-<br />
-<br />
Mineral<br />
Solvent, MoS 2<br />
-15 to 45<br />
***<br />
**<br />
Adhesive lubricant <strong>for</strong> open gears and wire ropes.<br />
Q4-5104<br />
-<br />
Li<br />
Mineral<br />
Gr, AW, O, C<br />
-25 to 130<br />
**<br />
***<br />
Non dripping grease. Rubber tyre mould closing mechanism; slow movement.<br />
BASELA 3 COMPOUND<br />
3<br />
Inorganic<br />
Silicone<br />
-<br />
-40 to 200<br />
***<br />
*<br />
Silicone compound <strong>for</strong> joints, valves and pipes fitting.<br />
STONE GREASE<br />
1<br />
Ca Special<br />
Mineral<br />
EP, AW<br />
-15 to 100<br />
****<br />
**<br />
Centralized lubrication in marble cutting.<br />
KCS<br />
2<br />
Ca<br />
Mineral<br />
No<br />
-10 to 55<br />
****<br />
*<br />
Demandless non closed mechanisms. Springs, chassis.<br />
GCG-3<br />
3<br />
Ca<br />
Mineral<br />
Gr<br />
-<br />
***<br />
**<br />
Pantograph lubrication (electrical train).<br />
KOP-300<br />
2<br />
Ca Anhydrous<br />
Mineral<br />
C, EP<br />
-25 to 110<br />
****<br />
***<br />
Public Work special grease. High resistance to water and impacts.<br />
KL 2<br />
2<br />
LI<br />
Mineral<br />
O, C, AW<br />
-30 to 130<br />
**<br />
**<br />
Multipurpose.<br />
KEP<br />
00, 0, 1, 2, 3<br />
LI<br />
Mineral<br />
O, C, AW, EP<br />
-30 to 125<br />
***<br />
***<br />
Multipurpose high EP, <strong>for</strong> shock, loads and lower speed.<br />
KEP-2-GF<br />
2<br />
Ca Special<br />
Mineral<br />
O, C, AW<br />
-40 to 90<br />
**<br />
**<br />
Tripoid joints (<strong>for</strong> cars), low temperature.<br />
KLX-2R<br />
2<br />
Li<br />
Mineral<br />
O, C, EP, AW<br />
-30 to 120<br />
**<br />
***<br />
Railways: housing box bearing + multipurpose.<br />
KEC<br />
00-000<br />
Li<br />
Mineral<br />
AW, EP<br />
-50 to 120<br />
**<br />
**<br />
Centralized lubrication <strong>for</strong> trucks and buses.<br />
KMS<br />
2-3<br />
Li<br />
Mineral<br />
EP, MoS 2<br />
-30 to 130<br />
**<br />
***<br />
MULTIPURPOSE HIGH EP. Emergency greasing.<br />
KL COMPLEX 150<br />
2<br />
Li Complex<br />
Mineral<br />
EP<br />
-20 to 170<br />
**<br />
***<br />
High temperature grease. Grids, big fans, etc.<br />
KL COMPLEX 280<br />
2<br />
Li Complex<br />
Mineral<br />
O, C, EP, AW<br />
-15 to 160<br />
***<br />
***<br />
Continuous steel casting roller bearing + hot roller mill bearings.<br />
KL COMPLEX 2000<br />
1<br />
Li Complex<br />
Mineral<br />
O, C, EP, AW<br />
-10 to 150<br />
***<br />
****<br />
Roller press bearing (Cement). High loads, low speed, water presence.<br />
KL COMPLEX 200<br />
2<br />
Li Complex<br />
Mineral<br />
EP<br />
-20 to 200<br />
**<br />
**<br />
High temperature grease. Grids, big fans, etc.<br />
HAMMER GREASE<br />
1-2<br />
Al Complex<br />
Mineral<br />
O, C, EP, AW<br />
-<br />
***<br />
***<br />
Hydraulic breaker hammer (chisel).<br />
BASELA BC 2<br />
2<br />
Li Complex<br />
Synthetic<br />
C, AW, PTFE<br />
-60 to 180<br />
**<br />
**<br />
Very low temperature grease, low friction.<br />
FOODSLIP MP2<br />
2<br />
Inorganic<br />
Mineral<br />
PTFE, C<br />
-20 to 150<br />
***<br />
**<br />
Multipurpose <strong>for</strong> food industry.<br />
* minimun resistance **** maximun resistance Aditives: O= antiOxidant C= antiCorrosion EP= Extreme Pressure AW= AntiWear Gr= Graphite
GALVA FLASH<br />
GALVA MATE<br />
GALVA INOX<br />
More than 3.000 hours - Shine (Mirror effect).<br />
More than 3.000 hours - Matt finish.<br />
More than 1.300 hours - Perfect finish (no after treatment needed).<br />
<br />
GREASE SPRAY<br />
GREASE SPRAY WITH PTFE<br />
LITHIUM GREASE<br />
MoS2 GREASE<br />
HIGH TEMPERATURE GREASE<br />
SILICONE GREASE<br />
EXTREME PRESSURE GREASE KP-6<br />
Multipurpose – Good penetration – Very sticky and viscous after solvent evaporation.<br />
Same as previous but with PTFE solid lubricant.<br />
Multipurpose grease, NLGI 1, from -20ºC up to +140ºC.<br />
Multipurpose grease with MoS2, <strong>for</strong> high loads and shocks, from -20ºC up to +120ºC.<br />
Anti-seize effect, NLGI 1, from -20ºc up to +1200ºC (under dry lubrication).<br />
Anti-stick, water repellence effect, good plastic-rubber compatibility, from -40ºC up to +300ºC.<br />
For open gear and wire rope, with graphite.<br />
<br />
MULTIPURPOSE LUBE<br />
GRAPHITE LUBE<br />
FOODSLIP SPRAY OIL with PTFE<br />
SILKROIL E-1<br />
CUTTING FLUID<br />
TAPPING FLUID<br />
It displaces water and moisture, it is penetrant, lubricant, rust-loosener, dielectric.<br />
Highly penetrant fluid with graphite, loosening all rust blocked parts.<br />
Food grade oil (H-1 type), multipurpose.<br />
Plastic and rubber mould release, based on silicone.<br />
For hard and soft metal, at high cutting speed.<br />
Drilling, milling or turning, manual operation, low speed, hard and soft metal.<br />
<br />
CONTACT CLEANER<br />
BELT DRESSING<br />
DEGREASER<br />
ANTI SPATTER<br />
MOULD RELEASE FOR PLASTICS S-10<br />
MOULD RELEASE FOR PLASTICS E-20<br />
For any kind of electrical or electronic contact.<br />
To avoid slippage of worn out drive belts.<br />
With fast evaporation solvent.<br />
Anti-adherent <strong>for</strong> weld spatter, silicone free, non flammable.<br />
Based on silicone.<br />
Silicone free, it allows further surface treatment.<br />
<br />
<br />
<br />
UNIVERSAL<br />
CONCENTRATED<br />
CC 10%<br />
CC 20%<br />
CC 30%<br />
CC 50%<br />
(temperature<br />
according dilution)<br />
-4 °C<br />
-10 °C<br />
-17 °C<br />
-37 °C<br />
<br />
(with anti-cavitation additives)<br />
ENGINE MAX 100%<br />
ENGINE MAX 50%<br />
ACU 2300 100%<br />
ACU 2300 50%<br />
Temperature according dilution.<br />
-37 °C.<br />
Temperature according dilution, MERCEDES-BENZ 325.0.<br />
-37 °C, MERCEDES-BENZ 325.0.<br />
<br />
<br />
<br />
<br />
ENERGY PLUS 40%<br />
ENERGY PLUS 50%<br />
K-140 ENERGY PLUS 100%<br />
K-140 ENERGY PLUS 50%<br />
-25 °C.<br />
-37 °C, G12 type.<br />
Temperature according dilution, MERCEDES-BENZ 325.3.<br />
-37 °C, MERCEDES-BENZ 325.3.
<strong>Krafft</strong> is in this field since more than<br />
30 years and has built an important<br />
experience. <strong>Krafft</strong> can supply the full<br />
range of lubricants needed <strong>for</strong> a<br />
complete cement plant and mine:<br />
from multipurpose greases and oils up<br />
to special lubricants.<br />
Coming to the specialties and to the<br />
lubrication of the big open gears of<br />
kilns and mills, <strong>Krafft</strong> is the leader in<br />
the Spanish market and is supplying<br />
many countries all around the world.<br />
We would like to point here some<br />
specialties:<br />
For mill’s and kiln’s OPEN GEARS<br />
* Q3-4612<br />
priming paste <strong>for</strong> pre-treatment be<strong>for</strong>e<br />
running in process.<br />
* KGP-2/P-E<br />
sprayable running in grease with<br />
graphite and MoS2.<br />
* KGP-2/P<br />
sprayable service grease with<br />
graphite and high base oil viscosity<br />
(ISO VG 1000).<br />
* KGP-2P/PLEX 1500<br />
sprayable service grease with<br />
graphite and higher base oil viscosity<br />
(ISO VG 2500).<br />
* KGP-2/F<br />
service grease with graphite <strong>for</strong> dip<br />
(bath) lubrication.<br />
* KGP-2/M<br />
service grease with graphite <strong>for</strong><br />
manual lubrication.<br />
For ROLLER PRESS BEARINGS<br />
* KL COMPLEX 2000<br />
high EP characteristics with solid<br />
lubricant, lithium complex soap.<br />
For kiln’s LOOSE TYRES<br />
* KROIL ESPECIAL RING<br />
special suspension of graphite in<br />
water.<br />
KRAFFT is offering adhesive-sealants,<br />
lubricants and coolants-antifreezes <strong>for</strong> the<br />
transport industry: railways, trucks,<br />
trailers, buses and taxis fleets…<br />
Greases<br />
• KEC: central lubrication of vehicle’s chassis.<br />
• HAMMER GREASE: <strong>for</strong> public works:<br />
hydraulic hammer.<br />
Adhesive-Sealants:<br />
• VN 2461 C: grease <strong>for</strong> CV<br />
• The hybrids SILKRON POLYMER H-100, (homocinetic) joints.<br />
H200 and H-75, POLIFLEX PRO and the<br />
polyurethane POLIFLEX PLUS are mainly<br />
• KEP 2 GF: Tripod joints.<br />
used:<br />
• KEP 2 GF/M2: steering rack, small<br />
gearboxes.<br />
- to fix and seal panels.<br />
• ANTI-SQUEAK MIX 29: to avoid<br />
- to seal door- and window frames.<br />
squeak on rubber bellow.<br />
• The polyurethane Standard K-1: <strong>for</strong><br />
• Q4-5879: <strong>for</strong> rubber and plastic<br />
wind-screen (structural adhesive)<br />
lubrication.<br />
• The range of silicone sealants: the<br />
• KL COMPLEX 150: long lasting<br />
SILKRON range. In particular the SILKRON<br />
lubrication (wheel bearing, …).<br />
SPG widely used <strong>for</strong> F.I.P.G. (Form-In-Place-<br />
Gaskets).<br />
• BASELA BC 2: synthetic <strong>for</strong> low<br />
temperature (-60ºC).<br />
Oils<br />
<strong>Krafft</strong> has an extended range of oils: <strong>for</strong><br />
engines, gearboxes, differentials, automatic<br />
transmission, hydraulic systems…<br />
Coolants-Antifreezes:<br />
We have the full range of coolants:<br />
•Type C (inorganic additives), NAP<br />
free, with different concentration<br />
according the freezing temperature.<br />
•Type D (organic additives), long life<br />
product, with different concentration also.<br />
<br />
<br />
<strong>Krafft</strong> is highly concerned by the renewable energy<br />
and created a special task <strong>for</strong>ce on this area.<br />
For the wind tower, we are offering<br />
basically adhesive /sealant and<br />
coolant-antifreeze.<br />
• NOVATTANE 3100:<br />
structural adhesive to repair blades.<br />
• SILKRON POLYMER H-100:<br />
hybrid to seal rotor hub and <strong>for</strong><br />
<strong>general</strong> sealing.<br />
• SILKRON POLYMER H-200:<br />
hybrid with very high initial tack<br />
(green strenglh).<br />
• SILKRON POLYMER H-75:<br />
hybrid to seal housing.<br />
• POLIFLEX PRO:<br />
<strong>general</strong> sealing (one is crystal clear).<br />
• ENERGY PLUS 50%:<br />
coolant working till -37ºC, new type D<br />
technology (organic), long lasting.<br />
For solar energy (photovoltaic and<br />
thermal), we are offering basically also<br />
sealants-adhesives, but besides chemical<br />
anchoring and cleaning products.<br />
• SILKRAF Neutral:<br />
RTV silicone sealant-adhesive, mainly<br />
during manufacturing process.<br />
• SILKRON POLYMER H-100,<br />
H-200 and H-75: hybrid, mainly used<br />
to install the panels.<br />
• POLIFLEX PRO:<br />
hybrid used mainly because it is<br />
completely transparent.<br />
• ANCLAPAK M-15, M-18, M-30:<br />
range of chemical anchoring products.<br />
• SHAMPOO Energic HD 200, HD<br />
180, SHAMPOO N-140, Glass<br />
Cleaning Spray: to clean the panels in<br />
order to keep their efficiency.<br />
<br />
In the nineties, <strong>Krafft</strong> started to work<br />
with an important steel industry in<br />
Spain to develop a special grease <strong>for</strong><br />
the continuous casting line and <strong>for</strong> the<br />
hot milling line. This grease was to<br />
lubricate the bearings of all the rollers.<br />
Furthermore as the grease is applied by<br />
centralized lubrication, it was<br />
necessary to have the correct fluidity<br />
and rheology to be pumped through<br />
the long piping circuit.<br />
For that application, <strong>Krafft</strong> developed<br />
2 kind of greases:<br />
• One is polyurea grease with a high<br />
base oil viscosity (ISO VG 460): it is the<br />
SITELA range.<br />
• As a cheaper alternative, we<br />
developed also a lithium complex<br />
grease : it is our KL COMPLEX 280.<br />
For hot <strong>for</strong>ging and stamping, <strong>Krafft</strong> is<br />
offering products with and without<br />
graphite:<br />
• Suspension of graphite in oil:<br />
KROIL 10, KROIL 22, KROIL 33<br />
• Graphite-free, water based, salts<br />
with Diesel effect: KROIL 1.705<br />
Besides these special greases, we have<br />
also other kind of greases and oils<br />
which allow lubricating practically all<br />
the rest of the equipment in a steel<br />
industry.<br />
• KL:<br />
Multipurpose lithium grease<br />
• KEP range:<br />
EP multipurpose lithium grease<br />
• KMS:<br />
EP multipurpose lithium grease with<br />
MoS2, <strong>for</strong> high loads and/or shocks
KRAFFT, S.L.U.<br />
Ctra de Urnieta s/n<br />
20140 Andoain - SPAIN<br />
Phone: +34 943 410 460<br />
Fax: +34 943 410 430<br />
E-mail: export@krafft.es<br />
An Illinois Tool Works Company