Measurement Solutions for Emissions, Service ... - Industrial Controls

More documents

Recommendations

Info

24 Technical data/testo 350 M analyser box, testo 350 XL Probe type Meas. range -40 to +1200 °C Accuracy ±0.5% of mv ±1 digit (+100 to +1200 °C) ±0.5 °C (-40 to +99.9 °C) Resolution Reaction time Reaction type Probe type Temperature measurement 0.1 °C (-40 to +1200 °C) Meas. range 0 to +120 % Accuracy ±1 digit Efficiency O 2 measurement 0 to +25 Vol. % O 2 ±0.8% of fsv (0 to +25 Vol. % O 2 ) CO (H2 compensated) COlow meas. (H2 compensated) 0 to +500 0 to +10000 t 95 ppm CO ppm CO ±5% of mv ±5% of mv (+200 to +2000 (+40 to +500 ppm CO) ppm CO) ±10% of mv ±2 ppm CO (0 (+2001 to +10000 ppm to +39.9 ppm CO) CO) ±10 ppm CO (0 to +199 ppm CO) 0.01 Vol. % O 2 (0 to +25 Vol. % O 2 ) 1 ppm CO (0 to +10000 ppm CO) 0.1 ppm CO (0 to +500 ppm CO) 20 s 40 s Flue gas loss -20 to +99.9 % qA t 90 Differential pressure 1 -200 to +200 hPa ±1.5% of mv (-50 to -200 hPa) ±1.5% of mv (+50 to +200 hPa) ±0.5 hPa (- 49.9 to +49.9 hPa) CO 2 0 to CO 2 max Vol. % CO 2 Calculated from O 2 0.01 Vol. % CO 2 40 s 20 s 30 s t 90 t 95 Differential pressure 2 -40 to +40 hPa ±1.5% of mv (-40 to -3 hPa) ±1.5% of mv (+3 to +40 hPa) ±0.03 hPa (- 2.99 to +2.99 hPa) Velocity 0 to +40 m/s NO meas. (option for testo 350 M) 0 to +3000 ppm NO ±5% of mv (+100 to +1999.9 ppm NO) ±10% of mv (+2000 to +3000 ppm NO) ±5 ppm NO (0 to +99 ppm NO) 1 ppm NO (0 to +3000 ppm NO) t 90 CO 2 meas. (IR) 0 to 50 Vol. % CO 2 ±0.3 Vol. % CO 2 + 1% of mv (0 to 25 Vol. % CO 2 ) ±0.5 Vol. % CO 2 + 1.5% of mv (>25 to 50 Vol. % CO 2 ) NOlow measurement 0 to +300 ppm NO ±5% of mv (+40 to +300 ppm NO) ±2 ppm NO (0 to +39.9 ppm NO) 0.1 ppm NO (0 to +300 ppm NO) 30 s t 90 NO2 measuring module (option for testo 350 M) 0 to +500 ppm NO 2 ±5% of mv (+100 to +500 ppm NO 2 ) ±5 ppm NO 2 (0 to +99.9 ppm NO 2 ) 0.1 ppm NO 2 (0 to +500 ppm NO 2 ) 40 s t 90 SO2 measurement 0 to +5000 ppm SO 2 ±5% of mv (+100 to +2000 ppm SO 2 ) ±10% of mv (+2001 to +5000 ppm SO 2 ) ±5 ppm SO 2 (0 to +99 ppm SO 2 ) 1 ppm SO 2 (0 to +5000 ppm SO 2 ) 30 s t 90 Resolution Reaction time Reaction type 0.1 % (0 to +120 %) Dimensions 395 x 275 x 95 mm Weight 3200 g Storage temp. -20 to +50 °C Oper. temp. -5 to +45 °C Material/Housing ABS 0.1 % qA (-20 to +99.9 % qA) 0.1 hPa (-200 to +200 hPa) 0.01 hPa (-40 to +40 hPa) Additional technical data: Memory: 250 000 readings Power supply: Via integrated mains unit (90 V to 260 V, 47 to 63 Hz) or exchangeable rechargeable batteries Electrical power required: 0.5 A (110 V AC), 0.3 A (230 V AC) Dew point calculation: 0 to 99°C td Maximum positive pressure of flue gas: 50 hPa (500 mm water column) Maximum negative pressure: 200 hPa (2000 mm water column) Pump flow: 0.8 m/s with flow monitoring Max. dust load: 20 g/m³ dust in flue gas Max. humidity load: +70°C Dew point temperature at analyser box inlet 0.1 m/s (0 to +40 m/s) 0.01 Vol. % CO 2 (0 to 25 Vol. % CO 2 ) 0.1 Vol. % CO 2 (>25 Vol. % CO 2 ) 1 second Load: 5 V/max. 5 mA, 12 V/max. 40 mA Warranty: Analysers: 2 years (excluding working parts e.g. measuring cells...) CO/NO/NO2/SO2/H2S/HC/CO2 sensor: 1 year O2 measuring cell: 1.5 years Additional technical data for testo 350 XL analyser box only Probe type Meas. range Accuracy ±1 digit H2S measurement 0 to +300 ppm ±5% of mv (+40 to +300 ppm) ±2 ppm (0 to +39.9 ppm) Technical data for HC module Parameter Meas. range ¹ Accuracy Methane 100 to 40,000 ppm less than 400 ppm (100 to 4000 ppm less than 10 % of m.v. (greater than 4000 ppm) Resolution 0.1 ppm (0 to +300 ppm) Reaction type t 90 Min. 02 req. in flue gas Reaction time 35 s Resolution 10 ppm Additional technical data: Trigger input: 5 to 12 V Reaction time t90 less than 40 s (rising or falling edge) Response factor ² 1 2% + (2 x methane reading) Propane 100 to 21,000 ppm less than 400 ppm (100 to 4000 ppm less than 10 % of m.v. (greater than 4000 ppm) 10 ppm 2% + (5 x propane reading) less than 40 s 1.5 Butane 100 to 18,000 ppm less than 400 ppm (100 to 4000 ppm less than 10 % of m.v. (greater than 4000 ppm) 10 ppm 2% + (6.5 x butane reading) less than 40 s 2 ¹ Lower explosion limit must be adhered to. ² The HC module is adjusted to methane in the factory. It can be adjusted to another gas by the user.
25 Technical Data for Control unit and testo 454 logger box Probe type Vane Thermal Testo humid. sensor, cap. Pressure Meas. range 0 to +60 m/s 0 to +20 m/s 0 to +100 %RH +10 to +30000 hPa Accuracy ±1 digit See probe data for system accuracy ±0.01 m/s (0 to +1.99 m/s) ±0.02 m/s (+2 to +4.99 m/s) ±0.04 m/s (+5 to +20 m/s) See probe data Probe 0638 1345 Probe 0638 1445 Probe 0638 1545 Probe 0638 1645 ±0.1% of m.v. Resolution 0.01 m/s (for Ø 60/100 mm), 0.1 m/s (for remaining probes) 0.01 m/s (0 to +20 m/s) 0.1 %RH (0 to +100 %RH) 0.001 hPa (probe 0638 1345) 0.001 hPa (probe 0638 1445) 0.01 hPa (probe 0638 1545) Probe type Pt100 Type K (NiCr-Ni) Type S (Pt10Rh-Pt) Type J (Fe-CuNi) Type T (Cu-CuNi) Meas. range -200 to +800 °C -200 to +1370 °C 0 to +1760 °C -200 to +1000 °C -40 to +350 °C Accuracy ±1 digit ±0.1 °C (-49.9 to +99.9 °C) ±0.4 °C (-99.9 to -50 °C) ±0.4 °C (+100 to +199.9 °C) ±1 °C (-200 to -100 °C) ±1 °C (+200 to +800 °C) ±0.4 °C (-100 to +200 °C) ±1 °C (-200 to -100.1 °C) ±1 °C (+200.1 to +1370 °C) ±1 °C (0 to +1760 °C) ±0.4 °C (-150 to +150 °C) ±1 °C (-200 to -150.1 °C) ±1 °C (+150.1 to +199.9 °C) ±0.4 °C (-40 to +200 °C) ±1 °C (+200.1 to +350 °C) Resolution 0.01 °C (-99.9 to +300 °C) 0.1 °C (-200 to -100 °C) 0.1 °C (+301 to +800 °C) 0.1 °C (-200 to +1370 °C) 1 °C (0 to +1760 °C) 0.1 °C (-200 to +1000 °C) 0.1 °C (-40 to +350 °C) Probe type NTC CO probe CO2 probe CO2 probe Meas. range -40 to +150 °C 0 to +500 ppm CO 0 to +1 Vol. % CO 2 0 to +10000 ppm CO 2 Accuracy ±1 digit ±0.2 °C (-10 to +50 °C) ±0.4 °C (-40 to -11 °C) ±0.4 °C (+51 to +150 °C) ±5% of mv (0 to +500 ppm CO) See probe data See probe data Resolution 0.1 °C (-40 to +150 °C) Probe type Mechanical Current/voltage measurement Current/voltage measurement Control unit, integ. press. sensor Control unit, integ. press. sensor Meas. range +20 to +20000 rpm 0 to +20 mA 0 to +10 V -200 to +200 hPa -40 to +40 hPa Accuracy ±1 digit (+20 to +20000 rpm) ±0.04 mA (0 to +20 mA) ±0.01 V (0 to +10 V) ±1.5% of mv (-50 to -200 hPa) ±1.5% of mv (+50 to +200 hPa) ±0.5 hPa (-49.9 to +49.9 hPa) ±1.5% of mv (-3 to -40 hPa) ±1.5% of mv (+3 to +40 hPa) ±0.03 hPa (-2.99 to +2.99 hPa) Resolution 1 rpm (+20 to +20000 rpm) 0.01 mA (0 to +20 mA) 0.01 V (0 to +10 V) 0.1 hPa (-200 to +200 hPa) 0.01 hPa (-40 to +40 hPa) testo 350, control unit Logger, measures and saves readings Analog output box (mA out) Power box Oper. temp. -5 to +45 °C -10 to +50 °C -10 to +50 °C 0 to +40 °C Storage temp. -20 to +50 °C -25 to +60 °C -25 to +60 °C -20 to +50 °C Battery type 4 AA batteries Alkali manganese Battery life 8 h 24 h 35 h Memory 250000 250000 Weight 850 g 450 g 305 g 700 g Dimensions 252 x 115 x 58 mm 200 x 89 x 37 mm 200 x 89 x 37 mm 200 x 89 x 37 mm Warranty 2 years 3 years 3 years 3 years
Page 1 and 2: Measurement Solutions for Emissions
Page 3 and 4: 3 service life of the measurement c
Page 5 and 6: y requirement 5 The approved refere
Page 7 and 8: 7 Your introduction to portable flu
Page 9 and 10: 9 testo 300 M-I / testo 300 XL-I te
Page 11 and 12: 11 Suitable probes at a glance / Te
Page 13 and 14: 13 Accessories Transport and Protec
Page 15 and 16: 15 Flexible flue gas analysis syste
Page 17 and 18: 17 Standard gas sampling probes The
Page 19 and 20: 19 Suitable probes for control unit
Page 21 and 22: 21 Accessories for testo 350 ComSof
Page 23: 23 Recommended for your application
Page 27 and 28: 27 testo 360 system overview Printo
Page 29 and 30: Maintenance and Service Pressure Pi
Page 31 and 32: 31 Pressure measurement for service
Page 33 and 34: 33 High temperature datalogger - Wi
Page 35 and 36: 35 Accessories for testo 177 testo
Page 37 and 38: 37 Non-contact temperature measurem
Page 39 and 40: 39 Pressure dewpoint transmitter -
Page 41 and 42: 41 Display, alarm, network with sta

Measurement Solutions for Emissions, Service ... - Industrial Controls

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?