BriteLine Wet Spec.pdf - OptoLum

Specify
BLW
PRODUCT
Product Dimensions
Cross Section -Actual Size
extrusion
R -Round
H -Channel
LED COLOR
Warm White
27 -2700°K
30 -3000°K
35 -3500°K
40 -4000°K*
Cool White
45 -4500°K*
50 -5000°K*
*special order color
FINISH
Project Name
Firm Name
Date
C -Natural Clear
N -Brite Natural
B -Black
Z -Medium Bronze
O -Custom
Fixture Type
BL Wet IP67
Length
4” Multiples
max length 5’-0”
Round
Side and Top Views -1/2”= 1””
Channel
© OptoLum Inc. January 2013 - OptoLum reserves the right to change specifications for product improvement without notification
Options
Finishes and Mounting
The standard BriteLine Wet aluminium housing comes
with a natural anodized finish. Additional anodized
finishes are available for an additional cost.
BriteLine Wet Round Extrusion comes with stainless steel
mounting clips and end caps.
BriteLine Wet Channel Extrusion does not come with
mounting clips, please coordinate installation details
with your OptoLum Rep.
Control Systems
BriteLine can be infinitely dimmable using OptoLum’s
VariLum dimming controller. BriteLine is also compatible
with most 0-10 systems with an OptoLum Dimming
Power Supply. Dimming controllers and power supplies
are ordered separately.
Electrical
BriteLine Wet meets IP67 enclosure standards.
Installation of Brite Line Wet requires wet location rated
wire connectors to be provided by the installer. Please
coordinate wire lead lengths with your OptoLum rep.
OptoLum Low Voltage LED luminaires require OptoLum’s
remote power supplies, which must be ordered separately.
BriteLine can be wired in series. Each power supply is
provided with one 11’-0” lead. A 60W power supply can
run up to 8’-0” of BriteLine. A 96W power supply can run
up to 12’-0” of BriteLine.
BriteLine with an OptoLum Power Supply uses 8.4W/ft.
OptoLum Inc., 1407 West 10th Place Suite 107 Tempe, Arizona 85281 t 480 968 2500 f 480 968 3005 e info@OptoLum.com w OptoLum.com

BriteLine Wet
product data is constantly improving - visit optolum.com for updates
Item Specification BL 3500K
Output* Lumens/ft 437.5
Efficacy
52 Lm/W
CRI CRI 85 nominal Special Order 95
Lumen Maintenance 50,000 hours with maintenance of 70% lumen output @25 °C
Electrical** Input Voltage 24 VDC
Power Consumption**
8.4 W/ft maximum at steady state
Control Dimming Compatible with most 0-10 systems with OptoLum VariLum Dimming Controller and OptoLum
Dimming Power Supply
Physical Dimensions (Round Extrusion) 0.69” O.D., length 4” multiples
Housing
Extruded aluminum, anodized finish
Lens
NA
Fixture connectors
Fixture comes with wire leads - Wet location wire connectors to be supplied by the installer
Ambient Operating Temperature -20 ° - 50 °C (-4 ° - 122 °F)
Max fixture run length per power
supply
12’-0” @ 96W
8’-0” @ 60W
Certification and Safety Certification UL, CE
LED Class
Class 2 LED product
Environment
IP67 - Wet Location
Estimates have been included in the illumination data pending LM79 testing results; actual illumination may vary from these estimates.
*
Power consumption data does not include the power supply and may vary slightly.
**
© OptoLum Inc. January 2013 - OptoLum reserves the right to change specifications for product improvement without notification
Lamp Life and Warranty
Average Rated Lamp Life is 50,000 hours. Lamp life is derived from a
formula that includes known LED tolerance and actual stress applied.
OptoLum warranties our products for three years from the date of
purchase against manufacturing defects.