FineLine Flex Spec.pdf - OptoLum

SpecifyFLXPRODUCTEXTRUSIONRD-RoundAL-AngleLP-LowProfileProduct DimensionsCross SectionsActual SizeRoundINTENSITYS -SLOL -LOH -HOLED COLORWarm White27-2700°K30-3000°K35-3500°K40-4000°K*Cool White45-4500°K*50-5000°K**special order colorSide and Top Views1/2”=1”COATINGU-UncoatedC-ConformallyCoatedProject NameFirm NameDateFixture TypeFL FlexLENS CONNECTION FINISH JOINT TYPEU-Unlensed* D-Dead End A-Natural B-Ball Black*S-Standard E-End to End Clear G-Ball Gray*O-Opal LensC-Black**NonstandardW-1.5” Wire*unlensed fixtures finishesmust be enclosed available for *Ball jointwithin a case oradditional cost connectors aresimilar enclosedonly availableapplicationfor the roundextrusionLENGTHFLSLO6” MultiplesFLLO3” MultiplesFLHO1.33” Multiples© OptoLum Inc. April 2014 - OptoLum reserves the right to change specifications for product improvement without notificationOptionsLensesFineLine Flex’s LEDs each have an integral 110° optic.An additional linear lens can be specified with the Roundextrusion to protect the fixture and facilitate easiercleaning and maintenance. OptoLum recommends thislens be specified unless a secondary enclosure for thefixture exists, such as a display case or architecturalhousing.CoatingAn optional conformal coating may be specified. Thiscoating is optically clear and is applied over the circuitryand LEDs prior to final assembly to add a degree ofprotection to the circuit from environmental elements.Joint Type and End CapsOptoLum offers two joint options for FineLine Flex Round.Ball Joint connectors provide a 30 degree range of rotation,a sleeker appearance and a more robust connection. TheBall Joint may be specified in one of two colors, naturalgray or black. Wire Flex connectors allow maximumflexibility for tight curves and angles. All other extrusiontypes utilize Wire Flex connectors. Wire flex fixtures shouldbe handled gently as the connections are more delicatethan Ball Joints.Mounting and FinishFineLine Flex comes with mounting clips which varybased on extrusion type. FineLine Flex is segmentedbased on intensity. Contact your Optolum rep foradditional segmentation options. FineLine Flex comeswith a natural anodized finish. Custom finishes areavailable for an additional cost.Control SystemsFineLine Flex is compatible with most 0-10 dimmingsystems. All 0-10 interface devices and power suppliesare ordered separately.ElectricalOptoLum Low Voltage LED luminaires requireOptoLum’s remote power supplies, which must beordered separately. FineLine Flex can be wired inseries.Power Supply W/ft 60W 96WFL Flex SLO 1.25 48’-0” 76’-0”FL Flex LO 2.5 24’-0” 38’-0”FL Flex HO 4.50 13’-0” 21’-0”OptoLum Inc., 1407 West 10th Place Suite 107 Tempe, Arizona 85281 t 480 968 2500 f 480 968 3005 e info@OptoLum.com w OptoLum.com

FineLine Flexproduct data is constantly improving - visit optolum.com for updatesItem Specification FLSLO 3000K FLLO 3000K FLHO 3500KOutput* Lumens/ft 64 123 278Efficacy 51 Lm/W 49.2 Lm/W 56 Lm/WCRICRI 85 nominalLumen Maintenance 50,000 hours with maintenance of 70% lumen output @25 °CElectrical** Input Voltage 24 VDCPower Consumption 1.25 W/ft maximum at steady state 2.5 W/ft maximum at steady state 4.95 W/ft maximum at steady stateControl Dimming Compatible with most 0-10 systems with an OptoLum 0-10 dimming interfacePhysical Dimensions Please refer to FineLine Round, aLine and Low Profile Spec Sheets for extrusion dimensionsHousingLensFixture connectorsAmbient Operating TemperatureMax fixture run length per powersupplyExtruded aluminum, anodized finishStandard Clear or OpalEnd to End or Dead End-20 ° - 50 °C (-4 ° - 122 °F)76’ @ 96W 38’ @ 96W 21’ @ 96W48’ @ 60W 24’ @ 60W 13’ @ 60 WCertification and Safety Certification UL, CE - Round ExtrusionLED ClassEnvironmentClass 2 LED productDry LocationEstimates have been included in the illumination data pending LM79 testing results; actual illumination may vary from these estimates.*Power consumption data does not include the power supply and may vary slightly.**© OptoLum Inc. April 2014 - OptoLum reserves the right to change specifications for product improvement without notificationLamp Life and WarrantyAverage Rated Lamp Life is 50,000 hours. Lamp life is derived from aformula that includes known LED tolerance and actual stress applied.OptoLum warranties our products for three years from the date ofpurchase against manufacturing defects.