Gehmann

specialized in target shooting

history 

60 years 

inventive 

Gehmann 

intuitive 

innovative 

The company background... 

In the 1930s a young Walter Gehmann started being noticed on the range. He was a pain to fellow competitors in 

small-bore and full-bore rifle, winning competitions to national level. Seeking further improvements in his scores he sought 

to develop shooting equipment of his day. As early as 1936 he designed his first precision rearsight assembly. The following 

year he developed the first pair of dedicated shooting glasses with a moveable lens holder. 

In 1939 he came up with Germany´s first target-shooting jacket, a shooting sling, boots and a specialised glove. 

Walter 

Gehmann 

founder 

1949 gave birth to the company name. Although the first 40 years were steered by its founder Walter, son Markus came to 

the firm and then assisted his father for some 10 years - before taking over. 

Returning to Walter Gehmann´s career: it was to see him achieve a world champion-ship, followed by his first rearsight 

iris in 1953 - with which he won no less than seven German championships. In 1956 came his first foresight iris. Two years 

later he produced his first colour filter unit for a rearsight. A little-known fact about Gehmann's founder was his talent for aiding design and 

development of the other well-known manufacturers in their pioneering days. 

Patenting the Mauser 66 action, designing the Anschutz Match 54 action and assisting design and production of the 

Feinwerkbau 65, 150, 300 and their small-bore rifle were just a few... he also carried out development work for Walther. 

Herr Gehmann Snr. now has more than one hundred patents to his credit and can still be found behind his desk. Some 

of his best ideas never got to us, unfortunately. Two examples being an electronically controlled iris that automatically 

adjusted to ambient light and a twin eyesight combined prism enabling the rifle shooter to use both eyes for sighting. 

An inquiring mind forever explores avenues of possibility though not all will reach maturity. More recently Gehmann 

witnessed the introduction of what is now the world’s leading pre-charged match air weapon -and chosen as Morini´s 

major distributor. 

The 162.E pistol, a revolution in its day, sent rivals scampering for similar ideas, though no-one has yet 

manufactured an equivalent. This got complimented by the handpump at the same time as development of the first 

lockable rearsight. Installation of works programmes for continued improvement of irises, sights, clothing, 

control equipment and their future adaptability, service warranty and customer cost were put in place at the turn of the century. 

The future looks bright. 

Walter Gehmann with 

his son - getting to 

know how to do it ! 

In conclusion, Gehmann is recognised world-wide as the premier target shooting equipment manufacturer - producing the very best at prices 

we can afford - with a service life second to none... 

GRAHAM MANLEY (UK) 

www.gehmann.com 

Milestones in our development ... 

1937 ... the first frames 1940’s ... the first jacket 

and the birth of the 

company 

1953 ... the legendary iris 1956 ... the first front iris 1997 - 2010 ... iris patent 

... 1937: Walter Gehmann 

invents the first shooter’s 

frames with a swivelling 

lens holder. 

.. in the 40’s Walter 

Gehmann continued 

developing equipment 

we now all assume to 

be common-place on 

the range. 

One of these products was 

a dedicated target 

shooting jacket with the 

now familiar non-slip 

shoulder pad. 

The family business 

name was born and 

became the company 

we know today. 

... 1953 saw development 

and manufacture of their 

first rear-sight iris. 

This iris and other 

versions that were 

patented later gave rise 

to Gehmann’s unique 

ability today of giving a 

30-year guarantee on 

any one of their 

rearsight irises - 

that’s progress! 

... 1956 led to the first 

foresight iris - from then 

on the product range just 

grew and grew. 

There is now just about 

every item we see on the 

range - from the shooter 

to the competiton 

controller, the weapons 

and clothing, the targets 

and the smiles! 

... 1997 saw the 

registration of our latest 

iris patent following 

non-stop development in 

design, engineering and 

materials. 

We made, what was for 

us, one of our biggest 

decisions which was to 

exceed any other 

manufacturer's standards 

by leading the field. 

page 2

index 

SIGHTING EQUIPMENT 

rearsight irises 4 - 16 

rearsight eyeshields 17 

rearsights 18 - 21 

special rearsight fittings 22 

anti-glare tubes 23 - 24 

foresights 24 - 25 

foresight irises 25 - 30 

spirit levels 31 

lenses etc. 32 - 33 

sighting equipment + archery iris 34 - 35 

SHOOTING FRAMES 

Gehmann 36 - 37 

Knobloch 38 - 39 

Varga 39 

clip-on iris etc. 40 

headband frames + 

caps etc. 41 - 43 

CLOTHING 

jackets + trousers 44 - 54 

belt, braces, buttons etc. 55 

underwear 56 

ear protection 56 

GLOVES 57 - 59 

BOOTS 

boots + kneeling rolls 60 - 61 

SLINGS 62 - 64 

GEHMANN PISTOL 65 

Morini 

pistols + accessories 66 - 70 

MATCH-GUNS 

pistols + accessories 71 - 73 

PISTOLS + RIFLES 

Röhm 70 

Steyr 74 - 75 

Feinwerkbau 76 - 77 

Walther 78 - 79 

Anschütz 80 

Edge + Hämmerli 81 

FX-Airguns 82 - 87 

Weihrauch 88 

Diana 89 

hometrainer 89 

RECHARGING EQUIPMENT 

refill air bottles and 200-bar pumps 90 

compressors 91 

CUSTOMISING 92 - 96 

SPOTTING `SCOPES + STANDS 

special disciplines 97 + 99 

`scopes + stands 98 - 101 

EQUIPMENT 

pellets and holders, etc. 102 - 103 

BALLISTIC TEST EQUIPMENT 104 - 108 

CARRY CASES + RIFLE SLIPS 109 - 113 

TARGET CHANGERS 114 - 117 

GEHMANN TEAMWEAR 118 

References 119 

page 3

sights 

SIGHTS 

we are an innovative manufacturer and supplier 

but also support historically proven designs 

this came about by listening to customer opinion 

and producing products which meet their needs 

Our system of rearsight irises is entirely based upon our patented fixed-seat iris design constructed with tempered stainless steel 

leaves attached to the iris body. All our irises are built upon this superior principle and all additional features connected to and within 

our iris combinations benefit from it. As a result of our patent the peep hole seen by the shooter is absolutely circular throughout the 

full range of adjustments. Additionally our irises can be cleaned with pressure air without risk of damage. All internal and, where used, 

external black surfaces are manufactured to give absolutely minimal light reflection - another cause of sight picture loss. 

All our irises are laser engraved and are with 

a 30-year no-quibble guarantee 

The reason the iris is so important to the shooter is it enables the shooter to achieve an extended depth of optical field - necessary 

to clearly see both the foresight and the target picture at the same time. 

Our design no longer utilises the old iris favoured by all other manufacturers. 

The old design, if accidently dropped or badly mishandled, may move within the iris body and be repositioned 

without the shooters` knowledge - impossible with our patent. 

YEARS GUARANTEE 

510 iris 

• much shorter and adjustable over a wider range of 0.5 - 3.0mm 

• the fixed-seat iris works with individually pin-located tempered spring steel leaves 

• the aim-point is precisely maintained through the wider range of adjustment by the 

introduction of a new system of aperture control operated by varying the pressure 

of a steel tube against the central aiming ring - this guarantees a perfect circle 

at any point within the scale 

• light reflection is kept to a minimum by external and internal matt finishes 

• Gehmann patented so not available in other manufacturers` irises 

• laser engraved indications 

510-S iris 

• as 510 above, but with black and silver finish 

Gagan Narang 

(India) 

World Cup winner (multiple) and 

world record holder 

Applies 

gehmann sights 

page 4

sights 

501MC iris with push-fit coloured rings 

• iris 0.5 - 3.0mm 

• engraved with its individual serial number 

• 5 external push-fit rubber rings which attach to the knurled ring in: red, yellow, green, 

blue and black 

• designed to provide an illusory optical effect which ensures perfect eye alignment 

• an extremely simple and inexpensive idea that gives exceptional improvement 

about our products 

POLARISATION FILTERS 

Deviating light rays originating from the bull or surrounding white, caused by high intensity light, result in a poor or deteriorating sight picture. 

Due to the properties of polarised filters and the fact that quartz grains lay on the filter in one direction it is possible with a single filter to 

absorb the reflected beams. 

By introducing and overlaying a second filter at varying angles to the first filter the incoming light intensity can be reduced up to 90% of its 

original value. 

Thus by using one or two filters (or none at all if this appropriate) one bit of sighting equipment allows 

you control of one of the most critical causes of all sighting problems. 

YEARS GUAR ANTEE 

550 polarisation filter 

• iris 

• two polarisation filters: 

- first ring eliminates reflections and controls white round target 

- second ring (with stainless lugs) controls light through the sight and 

enables varying degrees of brightness 

• 10 - 90 % light absorption via the twin polarisers 

• can be used as an iris only - or with one, or both, polarisers 

• easy clean instructions are included 

563 iris, 6-colour and single polariser 

• iris 

• 6 colour filters: yellow, orange, green, brown, light and dark grey 

• single polariser 

• can be used as an iris only 

• easy clean instructions included 

• finished in black and silver 

564 iris, 48-colour and single polariser 

• iris 

• 12 colour filters: 

1. wheel: yellow, dark green, orange, brown, light and dark grey 

2. wheel: light and dark blue, lemon yellow, red, light green and lilac 

colours from one ring can be mixed with the other - to provide the 

remaining 36 colour options 

• single polariser 



• finished in black and silver 

page 5

sights 

abou t our colour f ilt ers... 

By maximizing space in a very small sight Gehmann have been able to develop their patented six-colour filter and also a 

filter housing with 12 individual colours. 

Combining 2 filter wheels of 12 colours a total of 48 colours can be achieved with our poly-colour filters: 

512MC, 564, 568, 568MC, 545MC and 546MC. 

This means improved target clarity can be achieved when shooting indoors or outdoors under artificial or natural light conditions. 

All filters are precision-made and polished optically flat. Hardened steel bearings on all filter wheels guarantee positive location of filter 

wheels - even with full-bore use - smooth operation and reduce long-term wear. 


566 6-colour 

• incorporates the patented 510 iris 

• filters are of the highest quality optically flat glass in colours: 

yellow, green, brown, light grey, dark grey and orange 

• can be used as iris only 


566-S 6-colour 

• as 566 but silver and black 

566-R 6-colour 

• as 566 but red and black 

567 6-colour 

• as 566 but silver and blue 

Thomas Farnik 

(austria) 

world champion 

winner world cup final 

winner world cup 

european champion and 

world shooter of the 

year 

page 6

sights 

500 snap-in iris and filter set 

• a combination of the 510 iris and five colour filters in yellow, 

green, brown, light and dark grey - plus two polarisers 

• can be used as iris only, iris with one or two colour filters, 

iris with one or both polarisers or iris with one colour and 

one polariser 

• filters simply snap into place 

• when two filters are used they ratchet against each other on 

machined grooves around their edges thus remaining correctly 

positioned under the spring clamp 



512MC iris and 48-colour system 

• iris 

• 48 colour combinations in two rings of six colours 

• can be used as one or other bank of six colours: 

1. wheel: yellow, dark green, orange, brown, light or dark grey 

2. wheel: light blue, dark blue, lemon yellow, red, light green 

and lilac 

• colours from one ring can be mixed with the other - to provide 

the remaining 36 colour options 


• each engraved with its own number 

• supplied with 5 external push-fit rubber rings to assist constant 

eye position shot after shot 


PRIME EFFECTS OF COLOUR FILTERS ON YOUR 

SIGHT PICTURE 

If clarity of the black target bull is lost it can be sharpened by our colour filters. These optically flat 

glass colours allow the passage of specific wavelenghts while restricting others - enhancing the 

black against the white in varying degrees - dependant on the colour filter selected. 

light grey: absorbs 50% of normal light 

dark grey: absorbs 75% of normal light 

brown: turns artificial light with a light bluish tinge into what appears as natural daylight 

light blue: turns artificial light into natural light 

dark blue: as above - used for brighter artificial light 

red: enhances black and white contrast and reduces glare from the white surround 

orange: effect of clarity is as above however orange also reduces interfering ambient light 

yellow: effect is similar to that of orange but over a reduced wavelength (range of light) 

lemon yellow: effects slightly higher wavelengths 

light green: comfortable to the eye - effect as for orange 

dark green: as above however for more powerful light 

lilac: increases contrast in the red / green spectrum 

page 7

sights 

565 iris, 6-colour & twin polariser 

• standard thread for all current precision 

target rearsights 

• removable thread allows retro-fit of our 

- 4.5 to + 4.5 magnifying diopter 

• locking collar to enable precise positioning 

of the 'V' mark 

• two polarisation filters 

1. first ring controls white round target 

2. second ring (with stainless lugs) controls light through the sight 

• all internal 

surfaces are 

matt black 

reducing light 

reflection to a 

minimum 

• matt black 

finish to 

eliminate 

reflected 

light and 

distortion 

of the sight 

picture 

• six optically flat glass colour filters which 

can be precisely located in position. Clear 

settings at either end of the adjustment 

range for use of iris only or polarisation only 

 


• infinitely adjustable iris made to 

our latest patent covering the 

range 0.5mm to 3.0mm 


Combinations 

iris colours 1. polariser 2. polariser What our filters can do for you... 

- - - improved depth of field 

- - enhances contrast 

- - eliminates reflections 

- enable varying degrees of brightness + eliminates reflections 

- enhance contrast while eliminating reflections 

provide infinite control of light and meteorological conditions 

page 8

sights 

569 iris, 7-colour & 5 grey filters 

in black and silver 

• iris 0.5 - 3.0mm 

• colours: yellow, green, orange, brown, red, lilac & blue 

grey scales of: 20, 40, 50, 70 and 90% 

• retains sight picture clarity longer when this is lost through tiring 

during a course of fire 

• a perfect help when local rules exclude other irises 




568 iris, 48-colour & twin polariser 

• iris 0.5 - 3.0mm 

• can be used as one or other bank of six colours: 

1. wheel: yellow, dark green, orange, brown, light & dark grey 

2. wheel: light blue, dark blue, lemon yellow, red, light green & lilac 

colours from one ring can be mixed with the other - to provide 

the remaining 36 colour options 

• twin polarisers 

• can be used iris only 


568MC iris, 48-colour & twin polarisers 

• specification as 568 but blue and silver 

• each engraved with its own serial number 

• supplied with 5 matt coloured push-fit rubber 

rings in red, blue, green, yellow & black 

attached to the outer knurled ring of your iris 

ensuring head presentation to the rearsight 

is perfectly constant shot after shot 


Katy und Matt Emmons 

presenting their Beijing Medals 

both apply gehmann sights 

page 9

sights 

irises with 1.5x diopter correction 

Designed to aid shooters without astigmatism suffering failing eyesight but who wish to continue successful shooting. Our magnified 

diopter range is ISSF compliant and all can be fitted to rifles entered in competitions not specifically excluding magnification. We offer 

a range with an iris only, iris with polarisers, iris with colours or a combination of all three - iris, colours and polarisers with a diopter. 

All our iris diopter combinations can be used without the diopter if using our 577 adaptor to replace the front thread. 

530 iris & 1.5x diopter 

• iris 0.5 - 3.0mm 

• 1.5x diopter with -4.5 to +4.5 correction 

• detachable diopter (needs 577) 

544MC iris & 1.5x diopter 

• iris 0.5 - 3.0mm 


• 5 external push-fit rubber rings 


• silver and blue 


551 iris, twin polarisers & 

1.5x diopter 

• iris 0.5 - 3.0mm 



• can be used iris only or with polariser(s) 



570 iris, 6-colour & 

1.5x diopter 

• iris 0.5 - 3.0mm 

• 6-colour filter: yellow, orange, green, 

brown, light grey and dark grey 


• can be used without colours 



570-R iris, 6-colour & 

1.5x diopter 

• as 570 above, but red and black 

page 10

sights 

575 iris, 6-colour, twin polarisers & 

1.5x diopter 

• iris 0.5 - 3.0mm 

• 6-colour filter: yellow, green, orange, brown, light grey & dark grey 


• 1.5x magnifying with -4.5 to +4.5 diopter correction 

• can be used without colours or polarisers 




546MC iris, 48-colour, 

twin Polarisers & 1.5x Diopter 

• iris 0.5 - 3.0mm 

• 48 colour combinations as 568MC 


• 1.5x diopter with -4.5 to +4.5 diopter correction 

• can be used without colours or polarisers 

• 5 external push-fit rubber rings 


• laser engraved serial number 


• silver and blue 

• detachable 1.5x diopter (needs 577) 

• second polariser ring 

• first polariser ring 

• second colour filter ring 

• first colour filter ring 

• iris leaves made of 

spring steel 

about our iris filter diopter production 

These are complicated products embodying complicated components. To understand this, let‘s look at an example, say 546 MC. Constructed from 

81 parts it uses best quality aluminium to give exceptionally light weight but an ability to be machined well. Our colour filters are optically flat 

glass within metal plates for maximum wear-life and our iris of spring steel using our patented centre pressure-plate system. We explained that 

this gives our perfect sphere. We also designed the whole unit to be field strippable for cleaning. All of this work going to just one of our units so 

it is good enough to carry our 30 year guarantee - free!! 

page 11

sights 

545MC iris, 48-colour & 1.5 x diopter 

• iris 0.5 - 3.0mm 

• 48 colour combinations but can be used without colours 

• 1.5x magnifyer with -4.5 to +4.5 diopter correction 


• laser engraved serial number 

• supplied with 5 external push-fit coloured rings 

• blue and silver 


about our product 

All new Gehmann standard irises with detachable thread 

can be adapted to include our 1.5x diopter by simply 

removing the front thread, attaching 50309 or 50300MC 

and locking the two together as shown (left) - removal 

of the same is a reversal of this procedure (right) 

50309 1.5 x diopter only 

50300MC as 50309 but silver 

• -4.5 to +4.5 diopter 

• can be retro-fitted to all Gehmann irises 

with a detachable thread - identified by 

the black back-plate - illustrated right 

• simply locked to the iris body and used as before 

577 

50309 

50309 50300MC 

50309 

577 

577 thread adaptor 

• allows our 1.5x irises to be used 

without magnifyer 

• your magnifyer is unscrewed leaving 

the filter unit, 577 is attached and your 

filter returned to the rifle 

page 12

sights 

501 rearsight iris lens holder system 

This unit attaches to your rearsight by utilising the strength of your iris to hold it in position once screwed in to your rearsight. It allows attachment 

of a correction lens which can be positioned along the rail to suit lengths of all irises without correction or magnification. 

501 lens holder (23mm) For our latesT irises 

with a detachable front Thread and 

without 1.5x magnified diopter 

• the front thread of your iris is removed with the factory spanner 

• 501`s adaptor thread is screwed into the front of your iris 

• the iris and 501 are attached to your rearsight after loosening the rail carrier`s allen screw 

• the lens is inserted in the lens holder which can be removed from the carrier rail if required 

• the lens holder is positioned to the rear of your iris as required and locked on the carrier rail 

• our system allows alignment of the carrier to suit you 

501A lens holder 

• as 501 above, but with female thread adaptor 

for our earlier irises without a detachable thread 

and all other manufacturers 

501SB lens holder 

• as above, but with thread adaptor 

for Sauer-Busk only 

507 6 coloured ring set 

• fits all standard 1“ rearsight discs 

• red, blue, green, yellow, light grey and black 

• gives an optical illusion that can be used to 

advantage for centralising eye to peep-hole 

508 6 coloured ring and 

filter set 

• 507 matt rings with six press-in optically flat 

14mm glass filters: yellow, green, orange, 

brown, light and dark grey 

• enables use of your favourite ring with one 

particular filter 

• very easy to clean 

• the coloured rings are designed to both hold 

and protect the filters 

page 13

sights 

579 CLS, the adaptors and their use 

Generally the first thing shooters notice about their eyesight deterioration is the target picture clarity 

suddenly becomes fuzzy or appears to move around like a dancing ball. 

Examination by your opthalmologist will accurately measure and diagnose your symptoms giving you the 

opportunity to do something about them. Should you suffer from one of the more common problems of 

myopia (short-sightedness), hypermetropia (long-sightedness) or astigmatism - we can cure them all with 

one unit - 579. 

This is produced in two standard factory forms, both carrying our 1.5x magnification correction diopter, 

one incorporating our iris and 6-colour filter system (570-579) and the other incorporating just 

the iris (530-579). 

579 can also be purchased on its own for retro-fit to our irises with the use of adaptors 

579-I to 579-III, as illustrated below. 

There is also consideration of day-to-day variations in your general health as a consequence of 

heart rate, blood pressure, air quality, stress levels, tiredness and work. Quick and easy compensation for 

these factors is achieved by simple manual adjustments of 579. These have absolutely no effect on the 

accuracy of any existing sight settings - which means the immediate benefit of this unique piece of equipment can be appreciated at once. 

579 is designed to attach to existing irises and provide astigmatic correction. It will be necessary to fully or partly dismantle your existing iris 

in order to attach it - this is done with the u-spanner originally provided with your iris. Once dismantled you will require one or other of our 

adaptor plates - illustrated below. 

All three adaptors slide inside 579`s body and are simply locked in place with three small allen screws. 

The adaptor plate is internally threaded to allow both items to then be fitted to your iris. This is done using your existing iris‘s front thread 

with the exception of 500, 501.MC, 510, and 510-S which require our 577 adaptor thread due to their unique construction. 

In the case of attaching 579 to a straightforward iris such as 550 - 569 there is nothing else to do. 

In the case of attaching 579 to a straightforward iris (as above) but also wishing to have a fuller 

level of sight correction it is necessary to introduce either our 50309 (black) or 50300.MC (silver). 

Instructions for this are included with 579 when bought new. 

In the case of attaching 579 to a unit already containing a 1.5x diopter the procedure is similar to 

that of the straightforward iris mentioned at the beginning... 

579-I adaptor 

allows use of 579 astigmatic lens with 

our irises 566, 566-R, 566-S, 567, 570, 

570-R & PH.570 

579-II adaptor 

allows use of 579 astigmatic lens with our 

irises 550, 551, PH.551, 563, 565, 568, 569, 

575, 512MC, 545MC, 568MC & 546MC 

579-III adaptor 

allows use of 579 astigmatic lens with 

our irises 500, 510, 510-S, 501MC & 564 

and for early Gehmann and 

other manufacturers‘ irises 

579-III + 577-K 

is used only for 530, PH.530 & 544MC 

page 14

sights 

(1) 

570-579 CLS vari-focal 

(3) (2) 

astigmatic iris 

what it is and how it works 

what it is... 

Until now shooters suffering from astigmatism have been obliged 

to use shooter‘s spectacle frames with their associated cost and 

need for an optician‘s prescription. 570-579 puts an end to this. 

It also has the advantage of being fully adjustable so eyes good 

for one setting at one time of day which may have deteriorated or 

changed at another can be instantly improved. 



a revolutionary concept allowing complete correction of 

varying degrees of astigmatism without need of shooter‘s 

spectacle frames 

• 510 iris 

• 6 colour filters 

• 1.5 x magnifyer 

• -4.5 to +4.5 diopter correction 

• twin astigmatism correction adjusters 

• 0°- 180° axis settings 



the basis of this is similar to the 570-579 but comprises only 

a 510 iris, adjustable from 0.5 to 3.0mm, and the 1.5x diopter 

with -4.5 to +4.5 correction 

• 510 iris 

• 1.5 x magnifyer 

• -4.5 to +4.5 diopter correction 

• twin astigmatism correction adjusters 

• 0°- 180° axis settings 

The added benefit this sight gives you is even as your eyes age, 

improve or deteriorate over years, extremely quick and simple 

adjustments can be made in no more than a couple of minutes. 

The basis of the sight is our 570 assembly comprising 510‘s iris 

which is infinitely adjustable from 0.5 to 3.0mm, our 6 colour filter 

ring and the 1.5 x magnifying diopter with -4.5 to +4.5 correction. 

Placed in the heart of these components is the 579 astigmatic unit 

with a registered design. 

how it works... 

In order to gain maximum benefit from this complicated unit there 

are set-up procedures to follow which are listed below. These are 

carried out using our ray diagram placed at a nominal 10 metre 

distance. This should be clearly seen as a symmetrical design with 

equal length and thickness radius lines once all settings have been 

correctly aligned. 

setting up ‘Sphere‘ (1) 

This is set up by rotating the milled front ring until the sight 

picture is slightly blurred or fuzzy then reversing the direction of 

rotation until the picture is absolutely clear. This is easiest achieved 

with the iris fully open to 3.0mm and none of the colour filters 

across the hole. 

setting up ‘Axis‘ (2) 

This is set by aligning the 0° - 180° collar with the V datum mark 

on the main body of the iris nearest your eye. The setting should 

be in accordance with your most recent eye test prescription - or 

if this is not possible - turned until the clarity of the picture seen 

through the iris set to 3.0mm is as clear as you get it. Positioning 

the collar is achieved by first unscrewing the three small allen 

screws which then allows the body of the unit to be rotated into 

position. After optimum clarity is once again achieved the three 

allen screws are re-tightened. 

setting up ‘Cylinder‘ (3) 

This is done by fine-tuning the twin levers on their ratchets. 

Whichever movement is made with one must be matched by 

opposite movement of its twin. View the ray design once more 

and make final setting of the two until the complete picture is 

both clear and balanced. 

finally... 

Having arrived at what may seem a perfect sight picture it may still 

be possible to gain small improvements by yet more fine-tuning. 

This requires patience. The spherical collar adjuster can be rotated 

anti-clockwise again until the picture is blurring then rotated 

back clockwise until really sharp. The axis was set and locked by 

you earlier but try unscrewing the three screws again and using 

minute rotations of the axis body in either direction. If your sight 

changes for better or worse with time then micro-adjustment of 

axis are possible by moving both levers the same way - different to 

the method used for setting cylinder, above. Once these steps are 

complete viewing the diagram and one or other slight movement 

of the levers may give that final step needed to gain a 100% 

improvement on what you saw before. 

The ray design target is also downloadable from: 

www.gehmann.com 

page 15

sights 

special thread irises for some other manufacturers 

Ph510 

• iris only, 0.5 - 3.0mm 

• for Parker-Hale or Redfield 

Ph551 

• iris 0.5 - 3.0mm 


• 1.5x magnifying diopter 


Ph566 

• iris 0.5 - 3.0mm 

• 6-colour filter 


Ph570 

• iris 0.5 - 3.0mm 




Ph565 

• iris 0.5 - 3.0mm 




Ph575 

• iris 0.5 - 3.0mm 





511 


• for Karabiner 31 

562 

• iris 0.5 - 3.0mm 


• for Karabiner 31 

Sb566 

• iris 0.5 - 3.0mm 


• for Sauer-Busk 

Sb565 

• iris 0.5 -3.0mm 




Sb510 



other models or threads 

available upon request 

Sb500 

• iris with five colour and 

two polarised snap-in filters 

• with thread adaptor 

for Sauer-Busk 

Sb530A 

• adaptor for standard irises 

into Sauer-Busk 

Ph999 

• adaptor for 

standard irises into 

Parker-Hale or Redfield 

page 16

sights 

780W-N + 780S-N ISSF eyeshields 

• the 30mm translucent or black push-fit eyeshield that can 

be rotated for perfect position 

• for standard 1“ irises or discs 

• 780W-N translucent 

• 780S-N black 

781-N + 781S-N ISSF eyeshields 

• the 30mm translucent or black eyeshield held in 

position by a rubber collar that fits around the thread 

or lock collar of your iris 

• 781-N translucent 


780W & 780S Rearsight 

eyeshields 

• easily attached to your standard 1“ iris or disc 

• simply pushed on to your rearsight iris or disc 

and held by the eyeshield`s rubber cup 

• two layers of translucent or black material give 

two levels of opacity 

• 780W translucent 

• 780S black 

• order `L‘ for left-hand and `R‘ for right-hand 

shooter 

781 rearsight eyeshield 

• has a rubber collar sized to fit your iris thread 

• firmly held by this so as not to be easily moved 

• translucent only 

806 rubber 

eyecup 

• easily pressed on to your 

standard 1“ iris or disc 

805-W + 805-S rubber 

eyecup 

and issf 

eyeshields 

• easily pushed on to your standard 1“ iris or disc 

• easily aligned 

• rubber eyecup is comfortable to use and extremely 

suitable for full-bore use 

• 805-W rubber eyecup + translucent eyeshield 

• 805-S rubber eyecup + black eyeshield 

page 17

sights 

priced to perfection 

590 `Compact` 

• the most economical precision target rearsight in the world ! 

• manufactured to typical Gehmann standards but sold at our most affordable price yet 

• extremely short base with strong double base clamps and stainless steel screws suitable 

for all types of rifle 

• precision machined from solid aluminium 

• short mounting rail allows maximum movement of the sight for all iris attachments 

• long standard-threaded tunnel enables use of all irises and anti-glare tubes 

• large elevation and windage knobs for easy use 

• attractive but functional matt black finish 

• bullet shift 1.5mm per click at 50 metres 

perfection - at what a price 

It has long been our goal to manufacture a precision rearsight designed to enter the market at as little money as possible. Due to the standards 

we set ourselves and the costs involved in high quality precision engineering - we were always fighting an uphill battle. Fortunately for us, over 

time, world engineering machinery has improved markedly and the cost of those machines reduced due to competitive world markets. This made 

it possible for us to consider how best we might bring the two together in order to achieve our goal. 

We decided to keep manufacture local, utilise materials and engineering techniques at as little on-cost as possible and so have worked both 

together to come up with our brand new 590 sight above. 

Extremely adaptable for all target rifle shootings whether in the garden, on the farm, down at the club or at international competition. It has a 

remarkable 1.5mm bullet shift at 50 metres for every click of the big elevation and windage knobs, the iris thread is universal and permanently 

held in a controlled position by a powerfully loaded diagonal spring and piston. The base is as short as we can get it whilst ensuring it remains 

strong enough to be a solid platform - and the clamping crossscrews of stainless steel give a lifetime`s service. External and internal finishes are 

non-reflective matt black both for practicality and aesthetic appeal. 

If this fits your type of shooting, you want highest precision but not at the highest price, this is for you. Ask your dealer ! 

595 lockable rearsight unit - black 

• all rearsights suffer from backlash on their threads over time and with 

use which originally arose at manufacture through machining tolerances. 

This allows positional movement of the moving surfaces carrying the 

iris thread hole and gives rise to its positional movement which directly 

affects accuracy at each shot - this is exacerbated by further thread 

micro-movements induced by the action of the rifle which increases this 

effect, producing erratic and unwanted scores 

• our patent introduced the unique feature of making a sight lockable, 

so that once set in position it stays that way. This remains the case 

throughout the full range of elevation and windage adjustments 

• now using larger stainless rods between the moving surfaces and 

25% larger base rail clamps for grip - the sight is even better 

• once elevation and windage are adjusted the lever is rotated until 

the sight body is locked maintaining your settings permanently 

in place 

• precision machined from solid aluminium and not using casting 

• attractively anodised for prolonged weather protection 

• front and rear threading allows use of an iris on the eye side 

and an anti-glare tube on the front side 

• micro-precision adjustment gives 

1.5mm bullet shift per click at 50m 

• individually numbered 

page 18

sights 

595MC 

• as 595 but blue 

595S 

• as 595 but silver 

Gyda Ellefsplass OLSSEN 

(norway) 

multiple european champion 

595, 518 & 540 rearsight development 

Early rearsights were engineered in such a way that with use and over time they developed backlash either on the threads or on moving parts 

within the assembly. Our remit was to design a complete rearsight with no movement once set, something still not available on any other 

current production rearsight ! 

In order to achieve this we started with an aluminium billet machined to extremely fine tolerances. No castings being used for any components. 

The material had to be impervious to corrosion but also provide extreme quality without any excess weight. 

Stainless silver steel rollers between adjusting and movable surfaces provided a means by which clamping could be applied to lock all moving 

parts in place. A simple camming-lever (available on 595 & 518 - 540 uses a heavy spring-system) compresses these parts so that they impinge 

on the rollers. A quarter turn of the lever is all that is required to secure all settings. 

A side benefit of this rearsight is the absence of the need to lubricate. The tolerances and materials used make this a thing of the past. Pressure 

air being all that is needed now and again for removing any dust or dirt. 

The strong base-clamp system allows attachment to a wide variety of rails and is very smooth and easy to use. 

page 19

sights 

518 ‘Clearview’ see-through rearsight 

• our best see-through sight with a giant 30mm clearview panel 

• 0.8 - 2.4mm iris is mounted in the front and can be used with 

colour filters, a polariser and an anti-glare tube - the filters have been modified to provide improved weather protection 

• 30mm screw-in colour filters are available (see illustration below) 

• the sight is locked once set, eliminating any possible shift in aimpoint 

• large elevation and windage knobs for easy use, manufactured with a strong rail clamp 


• includes a foresight raising block to match the increased rearsight height 

30mm & 20MM clearview filters 

• 518-UGR - green - 30mm for 518 only 

• 518-UGE - yellow - 30mm for 518 only 

• 518-UDG - grey - 30mm for 518 only 

• 540-UGR - green - 20mm for 540 only 

• 540-UGE - yellow - 20mm for 540 only 

518-559 

anti-glare tube 

• also suits 540 

518-fpo 

TWIN POLARISER 

• also suits 540 

iris filters (also suit 540) 

• 518-FGR - green 

• 518-FGE - yellow 

• 518-FB - blue 

518-AB 

518-ABN + 540-ABN 

page 20

sights 

540 ‘Champion’ see-through rearsight 

• the latest in our see-through sights 

• 20mm see-through panel 

• moveable front iris, adjustable from 0.8 - 2.4mm 

• colour filters are available as for 518 (left), now modified for 

greater weather protection 

• the iris is detachable from the front with our special tool and 

positioned wherever wanted in the tunnel 

• it is also possible to remove the iris completely and replace it with 

a standard iris but this requires the addition of our 540-A adaptor 

• shorter but stronger rail clamp than 518 with solid clamps and 

stainless steel allen securing screws 

• large elevation and windage knobs for ease of use 

• perfect for reading wind flags whilst on aim 


adjusting tool for 

iris in tunnel 

Gehmann SEE-THROUGH rearsightS 

Developed for the Seoul Olympics the 594 `See-Through´ was used by Malcom Cooper from England as an untried item - he won the Olympic 

three-position gold medal as a result - nothing more needs to be said. 

Since then it has become a favourite with shooters of all levels of competition and subsequently won gold in Atlanta. Despite this we realised 

there was room for design improvement so we embarked on changes finally leading to the expanded view 518 'Clearview' and 540 ‘Champion‘ . 

page 21

sights 

597 issf crossover 

Rearsight prism 

• for shooters with one defective eye wishing to shoot 

with the other 

• completely waterproof with an external lens either 

end for water and dust protection 

• centre to centre sight line displacement of 65mm 

gives no physical change to the sight picture but 

does require use of a larger than usual aperture 

• attachment is direct to a standard 1“ sight disc - 

or if using one of our shorter iris, via 597A - or a 

longer iris, via 597B 

• a 1“ knurled outer ring is used nearest the eye for 

attaching an eyeshield or eyecup 

596 12mm sight line 

displacement 

• 12mm radial offset of rear sight line 

• picture characteristics unchanged 

• for perfect head-to-cheekpiece position 

• attaches as 597 above 

• non-reflective matt black 

• 1“ collar for eyecup or eyeshield 

597A cradle for 597 

• for short body Gehmann irises 

with or without filters 

597B cradle For 597 

• for long body Gehmann irises 

with filters and 1.5x magnifyer 

857 offset height adjustable sight bases 

• offset sight-line bases with strong steel base clamps and a spacer rod for use on Walther 

• graduated steel horizontal rods 

• 4 x spacer and screw sets allow the following heights: 12 (standard), 13.5, 14, 15.5, 16, 17.5, 18, 19.5, 20, 21.5, 22, 23.5, 24, 25.5, 26, 

27.5 and 28mm 

• weight only 170grms 

• free 985 carry case ! 

page 22

sights 

554 rearsight anti-glare tube and iris 

• screws to front of rearsight 

• eliminates incoming glare 

• iris controls incoming light and the amount 

seen round the foresight 

559 rearsight 

Anti-glare tube only 

552 rearsight anti-glare tube 

combined iris 

• an exceptionally slim and longer-than-usual tube for the front of 

your rearsight - suited to full-bore sights with limited front-side 

clearance 

• incorporates an adjustable iris at its front end for control of the 

incoming light, centralisation of the foresight picture and control 

of the amount of white to be seen around the foresight 

• iris mount plate can be moved across the tube 

• rigid in position, easily adjusted whilst shooting 

• easily removed 

• fits all rearsights with internal threading at the front 

556-25, 556-35 and 556-50 

Rearsight anti-glare tubes 

• extra slim rearsight tubes which can be fitted to 

rearsights with limited front clearance recesses 

• extremely light 

• different lengths, or combinations, give different 

amount of white round the foresight 

• internally threaded for coupling together (1) or 

as an extension of your rearsight iris (2) 

• code suffix indicates length in mm 

556-25 

556-50 

556-35 

(2) 

(1) 

553 rearsight anti-glare tube and polarisation filters 

• screws to the front of any rearsight 

• adjustable twin polarisation filters (1) + (2) allow infinite control of incoming light across the whole sight picture 

• easily adjusted 

(1) 

(2) 

page 23

sights 

558 foresight anti-glare tube 

• M.18 external male thread one end (2), female o-ring the 

other 

• needs 5018 collar for our M.18 irises but screws direct to 

our M.18 and M.22 lenses 

• push-fits to earlier irises without internal threading (1) 

(1) 

(2) 

(2) 

558-22 

• for our M.22 foresight accessories (but see 558 for 

lenses) 

• our irises may need 5022 collar 

• our M.22 lenses accept 558 direct or 558-22 with 

5022 collar 

• push-fits to our earlier irises without internal 

thread 

526-18 M.18 cant adjustable 

foresight only 

• for all leading types of rifles like Anschütz, Feinwerkbau, 

Steyr and Walther (including spacer) 

• rotates for cant 

• set in position without tools 

• easily read due to clear laser engraving 

• extremely short - 26mm - allowing use of irises and other 

accessories so as not to exceed the I.S.S.F. length rule 

526-22 

• as 526-18, but M.22 

523-18 

523-18 foresight only 

• for Anschütz, Feinwerkbau, 

Steyr and Walther - 

(needs spacer for Walther base) 

• extremely short - 26mm - allows use of 

irises so as not to exceed the I.S.S.F. 

overall length rule 

• M.18 thread 

523-22 

• as 523-18, but M.22 

523-22 

523-18.S foresight 

only 

• as above, but for use with elements 


page 24

sights 

535, 536, 537 ring-thickening irises „Two-in-One“ 

• patented irises for only one end of the foresight 

• internal ring and its thickness are both adjustable 

• quick and easy to adjust your sight picture 

• consistency of aim point 

• M.18 but can be used in M.22 with 538 collar 

• note: to comply with the I.S.S.F. rule limiting foresight length to 50mm, 539 cylinder is used to replace that fitted standard on 

the Anschütz 6832 foresight. 

539 is included free with 535A, 536A and 537A 

• lock-collar 

• laser 

engraved 

settings 

• iris for 

internal 

diameter 

• iris for ring 

thickness 

• flat face 

unscrewable 

for accessories 

cross-sectional view 

535 `Two-in-One‘ 

• horizontal level bars 

• infinitely adjustable 

• with ring-thickening 


• ring only 




• crosshair 



539 short cylinder for 

Anschutz 6832 foresight 

• enables 535, 536, 537 and 548 use on a 6832 Anschütz foresight 

without exceeding the I.S.S.F. overall length rule 


• illustration above ready-fitted to one of our irises 

538 collar for M.22 sights 

• enables M.18 items to fit M.22 

page 25

sights 

Gehmann foresight irises M.18, M.22 

and 1¼¨ threaded 

Different light conditions give differing sight pictures to the individual shooter’s eye. The use of an adjustable iris regulates the light coming 

from the target as well as allowing personal choice of the amount of white seen around the bull. Both maximize the chance of precise central 

location, shot after shot. 

Using our free clip-on external ring shooters can also enlarge the blackened area seen round the foresight. Further foresight picture clarity is 

available using our lenses, polarising and external white area screens. 

M18 fits to Anschütz, Feinwerkbau, Steyr and Walther etc. 

M22 fits to Feinwewrbau - Models 602, 603, C62, P70, 500, 

700, 2602 +2700 and latest Steyr 

M.18 M.22 

520 



520-22 



522 


• ring only 

522-22 


• ring only 

522-S 


• ring only 

• as 522, but 

silver & black 

522-22-S 


• ring only 

• as 522-22, but 

silver & black 

525 


• crosshair 

525-22 


• crosshair 

528 `Double-Cross` 

Iris M.18 

• can appear as a metal element 

with horizontal bars or easily 

switched to a fine crosshair 

• uses one side of the foresight only 

• supplied with a plastic tool to 

rotate the bars 

528-22 

• as 528, but M.22 

• also available in a 

special ‚D‘ size: 5.5 - 7.5 mm 

page 26

sights 

A B C 

D 

foresight irises 

order code M.18 M.22 1 1/4“ x 28 range 

520 / 520-22 / 520-35 / 535 / 535A - horizontal level bars X X X 

522 / 522-22 / 522-S / 522-22-S / 536 / 536A - ring only X X 

525 / 525-22 / 537 / 537A - crosshair X X 

520A / 522A / 522A-S / 525A X 2.4 mm - 4.4 mm 

520B / 522B / 522B-S / 525B X 4.0 mm - 6.0 mm 

520C / 522C / 522C-S / 525C X 2.9 mm - 4.9 mm 

520A-22 / 522A-22 / 522A-22-S / 525A-22 X 2.4 mm - 4.4 mm 

520B-22 / 522B-22 / 522B-22-S / 525B-22 X 4.0 mm - 6.0 mm 

520C-22 / 522C-22 / 522C-22-S / 525C-22 X 2.9 mm - 4.9 mm 

535 / 535A / 536 / 536A / 537 / 537A X inner ring: 2.4 mm - 4.4 mm / outer ring: 7.0 mm - 9.0 mm 

535 - 537 + 548A & 548B using thread adaptor 538 to fit M.22 X inner ring: 2.4 mm - 4.4 mm / outer ring: 7.0 mm - 9.0 mm 

528A - horizontal level bars or crosshair X X 2.4 - 4.4 mm 

528B - horizontal level bars or crosshair X X 4.0 - 6.0 mm 

528C - horizontal level bars or crosshair X X 2.9 - 4.9 mm 

528D - horizontal level bars or crosshair X 5.5 - 7.5 mm 

521FQ - horizontal level bars or crosshair X inner ring: 2.9 mm - 4.9 mm / outer ring: 7.0 mm - 9.0 mm 

521G - ring only X inner ring: 2.9 mm - 4.9 mm / outer ring: 7.0 mm - 9.0 mm 

548A - square X 2.4 mm - 4.4 mm 

548B - square X 4.0 mm - 6.0 mm 

549 - triangular X 3.2 mm - 4.2 mm 

549-22 - triangular X 3.2 mm - 4.2 mm 

520A-35 - horizontal level bars X 2.4 mm - 4.4 mm 

520B-35 - horizontal level bars X 4.0 mm - 6.0 mm 

520C-35 - horizontal level bars X 2.9 mm - 4.9 mm 

520D-35 - horizontal level bars X 5.5 mm - 7.5 mm 

529 Big bore foresight unit „rightsight“ 

• special sized (1 1/4“) big bore foresight unit for our foresight irises 520-35 

• with detachable anti-glare tube and 1.5x lens 

• spirit level with a medium-to-slow bubble that 

runs through twin markers 

• laser engraved degrees marked for reference 

• exclusively available in the USA at: 

www.stallingsmachine.com 

520-35 foresight iris 1 1/4“ 

• special sized for big bore foresight units as 529 

• infinitely adjustable iris 


• exclusively available in the USA at: 

www.stallingsmachine.com 

page 27

sights 

foresight irises 

• we manufacture all our irises with a wider range of adjustment, 

shorter overall length and super matt finish, both internally and 

externally 

• calibrations are laser cut 

• 520 and 535 appear as a standard metal element with 

horizontal bars, 522, 522.S and 521.G as a perspex element 

and 525 and 537 as a crosshair - 528 and 521.FQ can easily be 

switched from horizontal level bars to a fine crosshair 

• once set the iris is held in position with a lock-collar 

• models 521.G, 522 and 536 use glass (not perspex) optically 

finished to eliminate image distortion 

• the iris is lacquered during production for smooth operation 

throughout a lifetime‘s use 

• M.18 for Anschütz, Diana, Hämmerli, Steyr, Walther etc. 

• M.22 for Feinwerkbau, latest Steyr models, R.P.A. etc. 

• 1 1/4“ for high power rifle competition foresights (30mm) 

• our irises enable the target picture clarity to be retained while 

shooting 

• personalisation of the amount of white seen round the bullseye 

is easily adjusted by a quick twist and negates need for 

time-wasting by inserting standard individual elements 

• all our M.18 and M.17 foresight irises are supplied with an 

additional push-fit annular ring which can be applied to the 

shooter‘s side of the foresight to increase the external black 

area around the aiming picture 

• adaptor 5018 is available for attaching our M.18 lenses, levels, 

screens or an anti-glare tube. 5022 for M.22 applications 

- however our M.18 foresight tube will screw directly to 

our 581-22 level and M.18 + M.22 lenses if this is required. 

The flat face of the iris nearest to the shooter is unscrewed 

with the use of a broad rubber band across one thumb and the 

adaptor inserted ready for the attachment of our accessories. 

Gehmann´s interchangeability of units is unique 

5018 and 5022 foresight adaptors 

• all our new foresight irises with a small mark between the two 

limit-of-adjustment marks (1) accept thread adaptors 

• the flat face of the iris can be unscrewed (2) and an adaptor inserted (3) for 

use of other accessories (4) 

• 5018 is for our M.18 & M.17 irises to use lenses, screens, levels or 

anti-glare tubes 

• 5022 is for M.22 foresights 

5018 

(1) 

(2) 

5022 

(3) 

(4) 

page 28

sights 

521.FQ 'Double-Cross' ring-thickening assembly 

• a complete iris and tube assembly with 528 'Double-Cross' 

• 2.9 - 4.9mm one end, 7.0 - 9.0mm the other 

• specifically for mounting to the later Anschütz 6832 foresight 

• body tube is marked with degrees for angle of cant 

• complies with I.S.S.F. overall length rules 

• internally threaded at the ends for lens and tube 

• special tool included (1) 

(1) 

521.G 'Ring Only' 

ring-Thickening assembly 

• as 521.FQ - ring only appearance 

548A & 548B square iris 

• both sides adjustable to form a square or rectangle by a 

twist of either calibrated external ring 

• adjustment range for the top and bottom or the sides is 

the same 

• for one side of the foresight only 

• available with M.18 thread: 

- 548A: 2.4 - 4.4mm 

- 548B: 4.0 - 6.0mm 

• needs 539 tube for use on Anschütz 

• 538 collar required for fitting M.22 foresights 

549 & 549-22 triangular iris 

• infinitely adjustable from 3.2 - 4.2mm 

• gives a precise central location of the target 

• available with M.18 thread: 549 

or with M.22 thread: 549-22 

special - thread irises 

M.18 M.22 

Parker-Hale 

PH520A, PH520B + PH520C 

PH522A, PH522B + PH522C 

M.17 

520A17 + 520B17 

Tanner 

TA522A + TA522C 

TA528A, TA528B + TA528C 

TA535 + TA537 

other models or threads available upon request 

page 29

sights 

531 iris & self-polarising screen 

to control light round iris 

• appears as a clear perspex element 

• adjusts from 2.9 to 4.9mm 

• polarised outer screen round the iris eliminates 

incoming glare thereby enhancing target clarity 

• free push-fit ring to enlarge outer edge of the iris 


531.Q 

• as 531, but appears as a metal element 

• M.18 thread - needs 538 collar for fitting 

M.22 foresights 

532 foresight polarising 

screen 

• screens incoming glare round the element 

• attaches to either end of the sight 

• may be used with a normal element or iris 

• 10 - 90% light absorption 


533-18 twin polariser kit 

• fitted at both ends for total light control 


533-22 twin polariser kit 

as 533-18, but M.22 

547 m.18 

element grip collar 

• matt black anodised 

• for 542, 546 & 546-R 

547-22 m.22 

element grip collar 

• as above, but for larger elements 

as 542-22 & 546-22 

542 & 542-22 elements 

• clear with thin black ring 

• in any size within the range of 2.7 - 5.2mm 

• 542 for M.18 - 542-22 for M.22 

546, 546-R & 546-22 elements 

• available in sizes within the range of 2.8 - 6.0mm 

(rising in 0.2mm increments) 

• 546 for M.18, clear - 546-R for M.18, red 

546-22 for M.22, clear 

page 30

sights 

581 radially adjustable spirit level 

• M.18 medium-to-slow bubble that runs through twin markers 

• screws into the foresight and is held in place by a lock collar 

- a c-spanner is provided to lock it in position 

• once in your position on the rifle whatever angle of cant you 

normally use can be set by simply rotating the whole bubble 

on it`s ratchet system 

• a friction collar holds your setting without need of more tools 

• laser engraved degrees marked for reference 

(1) 

581-22 

• as 581 above, but for M.22 foresights 

• 581-22 has an internal M.18 thread for attaching a lens, 

filter screen or anti-glare tube (1) - accepts 558 direct 

591 M.18 spirit level 

• fits under the foresight element or 

iris clamp ring 

• seen over the foresight 

• easily repositioned and locked 

591-22 

• as 591 but for M.22 foresights 

583 Spirit level illumination with 

two colour filters and iris 

• a variable intensity (iris-controlled) illuminator which can be 

easily clipped over our latest 591, 581, 585-FP and someother 

manufacturers' levels 

• with on / off switch 

• filter colours are yellow and green to improve the contrast 

in your bubble and the target 

592 rearsight 

spirit level 

• fits on the front receiver rail and is 

seen through the rearsight underneath 

the sight-line so reference to the 

bubble involves the minimum of eye 

movement 

• micrometric positioning of the level is 

achieved with the small knurled wheel 

on one side 

• now made with a slow reading curved 

bubble 

• easily detached and cleaned 

page 31

sights 

524 M.18 iris screen 

• screens unwanted white from around the foresight element 

• aids definition of the aiming ring by eliminating glare 

• eases eye fatigue 

• iris leaves are coated with latest matt black anti-glare finish 

• needs 538 collar for fitting M.22 foresights 

524-1.5 iris screen with 1.5x MC lens 

• specification as above but with our latest 

1.5x wideband MC coated lens 

• reduces glare for a sharper picture over longer periods 

• M.18 thread - 538 collar required for fitting M.22 foresights 

584 1.5x lens with wideband MC coating 

• wideband MC lens giving only a 0.5% light loss 

• designed to minimice refraction 

• laser centred during coating to ensure a perfectly smooth layer 

• M.18 with M.18 internal thread for attaching our 

anti-glare tube and / or a spirit level - 16mm lens diameter 

584-22 as above for M.22 Foresights 

• M.22 with M.18 internal thread - 18mm lens diameter 

wideband MC coatings reduce light loss by 99.5 % on uncoated glass, 

here‘s how... 

When standing in front of a pane of clear glass you see your own image. This is caused by a property of the glass which obstructs the passage 

of light. This is normally in the order of a 4% to 10% loss. If we apply this principle to our foresight lens it can be seen we will inevitably lose 

some of our sight clarity. The latest science has helped us to reduce this. When our special wideband optical coatings are vacuum applied the 

treated lens immediately allows more light to pass. Historically this gave roughly a 4% improvement with one coating. Increasing these to two 

or three coats improves this to 8%. A more modern technology still allows the layers to be increased to six where we find light loss is down 

to 0.5% - a terrific improvement. Better yet, the red and blue ends of visible light are expanded in bandwidth. These bands are controlled by 

our multicoating process eliminating spectral distortion. Normal light visible via the human eye is in the 380 - 780nm range but following our 

process the benefit can clearly be seen in our graph. 

reflection % 

reflection level 

5,0 

4,5 

4,0 

3,5 

3,0 

2,5 

2,0 

1,5 

1,0 

0,5 

0,0 

350 400 

wavelength (nm) 

450 500 550 600 650 700 750 800 

page 32

sights 

578 1.5x wideband MC lens 

• 1.5 x magnification 

• wideband MC lens losing only 0.5% light loss 

• designed to minimice refraction 


• M.18 with internal thread for attaching our M.18 anti-glare tube or 

spirit level - 16mm lens diameter 

578-22 as above M.22 


our lenses are threaded internally for the addition of other M.18 

sight accessories - with the exception of 580 (below) 

586 1.3x wideband lens 

• wideband MC coated lens giving only 0.5% light loss where other 

manufactures can be anything up to 8% ! 

• designed to minimise refraction 


• M.18 with internal thread for attaching our M.18 anti-glare tube or 

spirit level - 16mm lens diameter 

586-22 as above but M.22 


580 1.5x broadband lens 

• M.17 (older threads) - 15mm lens diameter 

985 carry case 

• an alloy edged solid carry case with 

egg-box foam internal padding and an 

over-centre clip lock. 

• ideal for shooting frames, sights or 

valuable accessories 

• sizes: 20 x 16 x 5cms 

page 33

sights 

748 Sight Black 

• stops reflected glare 

• quick drying 

• easy to use 

• net. weight 3.5 oz (100 grms) 

746 and 747 foresight covers 

• 746-LK leather - for standard size foresights 

• 746-LG leather - for higher profile foresights 

• 747-LK as 746-LK but artificial material 

• 747-VG as 746-LG but artificial material 

5003 & 5004 rearsight & 

Foresight dust caps 

• simple plastic caps to keep dirt off expensive sights 

• 5003 for rearsights and M.22 foresights 

• 5004 for M.18 and M.17 foresights 

sight tools 

• 5005 rearsight spanner 

• 5007 rearsight lock-collar 

• 5006 foresight spanner M.18 + M.17 

• 5008 foresight spanner M.22 

• 5009 foresight lock-collar M.18 

• 5010 foresight lock-collar M.22 

page 34

sights 

505 archery iris 

• suitable for commercial bow sights 

• 22 indexed points from 0.5 - 12.0mm 

• iris leaves with special surface coating to eliminate oxidation and to preserve the matt black anti-glare finish 

• archers can focus on the same colour rings at different distances with an identical target picture for all 

• bow hunters can determine distance to the quarry by noting the iris aperture for a given game silhouette 

• available in 3 stainless steel threads: 505 8/32“ 

505-1032 10/32“ 

504L M4/65 

others available so please enquire 

ARCHERY 

sighting aids available: 

• 502 vertical post with red tip 

• 503 crosshair 

• 506 black dot 

• easily mounted using a mini-wrench 

• simply screwed on its mount 

• adjustment ring allows exact positioning of the aid with 

the added advantage of an emerging off-centre tunnel 

• effect to indicate cant 

page 35


GEHMANN FRAMES - looking for something better ? 

• adjustable side-bars • comfortable, softly 

sprung earpieces 

• sliding mount 

sets holder 

position on the 

crossbar plus up 

or down angle 

• 23mm (300) or 

37mm (300P) 

lens holders are 

easily rotated 

laterally round the 

top mount 

• nose-bridge 

adjustable for 

height and 

radius 

• finished in 

attractive matt 

silver 

• your face width is 

matched by setting 

the crossbar into 

one of three 

matching holes 

in the end of the 

side-bar mount 

300 + 300P Gehmann Frames 

• 300 with 23mm lens holder 

• 300P as above, but standard with 37mm holder 

• free 985 carry case 

page 36


300 ILLUSTRATION SHOWING SOME OF THE ACCESSORIES 

I.S.S.F. flip-up eyeshields with 305 clamp 


• 301T-N translucent 

• 301W-N white 

I.S.S.F. clip-on sideshields 




340K 23mm clip-on iris 

340 37mm clip-on iris 

340-T 37mm clip-on iris 

with translucent mount 

344K 23mm centerer 

344 37mm centerer 

985 carry case 

• an alloy edge solid carry case 

with 20 x 16 x 5cms internal 

egg-box foam padding and 

an over-centre clip lock and 

swiveling carry handle 

• ideal for shooting frames, 

sights or any valuable 

shooting accessory 

• 313 universal angle bracket allows 

the lens holder to be offset 

385 Trap or Skeet glasses 

• wide field of view 

• rigid polyamid frame 

• length adjustable side-bars 

• with three lenses: 

grey, yellow and clear 

page 37


KNOBLOCH frames 

330 and 332 Knobloch frames 

• 332 with height adjustable nose-bridge 

• 330 which is non-adjustable (order 330L for left-hand) 

• a wide range of accessories is available 

- see price list for further details 

• suitable for iris, eyeshields, sideshields, polariser, etc. 

• may be purchased as a complete boxed set - 350 

335 Knobloch 'Junior' 

• a reduced size set of frames for juniors 

330 

332 

335 

337 rotational 3 colour filter 

340K 23mm clip-on iris 

340 37mm clip-on iris 

340-T 37mm clip-on iris with translucent mount 

344K 23mm centerer 

344 37mm centerer 

I.S.S.F. flip-up eyeshields with 367 clamp 




flip-up eyeshields with sideshields and 

367 clamp 

• 333S black 

• 333T translucent 

• 333W white 

I.S.S.F. clip-on sideshields 




page 38


Varga frames 

320 & 320.P 

• 320 rifle with 23mm holder 

• 320.P pistol with 37mm holder 

• height adjustable nosebridge 

• I.S.S.F. flip-up translucent eyeshield 

• accepts all accessories and both size holders 

• super-matt silver finish 

• rubberised flexible earpieces 

• cased 

Varga 

accessories 

Varga frames accept the specialised 

accessories below: 

• 325 iris 

• 327 holder with a hinge in 

the vertical post 

(23mm diameter) 

• 328 offset nose-bridge for 

shooters using an extreme 

angle of sighting so the lens 

does not foul the nose 

• 321-N Varga 30mm flip-up eyeshield 

321-N I.S.S.F. flip-up 

eyeshield 

328 offset 

nose-bridge 

324 clamping piece for 

eyeshields 321 + 321-N, 

made of plastic 

324-M clamping piece 

for nose-bridge support bar, 

made of metal 

325 iris 

KNOBLOCH ACCESSORIES 

327 lens holder 

352-23 filter inserts (23mm) 

352-37 filter inserts (37mm) 

367 + 367-S 

crossbar clamps 

for eyeshields 

and lens holders 

lens holders with 367 clamp 

354 -23mm - vario lens holder 

342/23 -23mm 

342/23GK -23mm - stepped shank 

342/37P -37mm - for filter mounting 

352T23 

352T37 

23mm clip-on filter holder 

37mm clip-on filter holder 

page 39


390 clip-on iris for ordinary glasses 

• attaches to normal glasses with a rubber tipped sprung clamp 

• flips up and stays up for normal vision 

• a superb iris that can be positioned within the sprung mount-plate allowing quick, 

easy and perfect alignment 

• iris leaves with our latest surface coating to eliminate oxidation and to preserve 

the matt black anti-glare finish 

• once set it vastly improves depth of field to sharpen the rearsight and foresight 

picture 

I.S.S.F. 30mm: 

391, 391-30.N, 391.S, 391.S-30.N 

clip-on eyeshields 

• clips on as 390 

• can be flipped up for normal vision 

• right- or left-hand shooter 

391-30.N - light 

391.S-30.N - dark 

391.S - dark 

391 - light 

392 set of 3 push-in colour filters 

for 390 

• colours: yellow, brown and grey 

393 stick-on adjustable iris 

• a mini stick-on iris for ordinary glasses 

• improves depth of field 

• exceptionally lightweight 

• iris can be radiused round the sticker 

and rotated around its support post 

• exceptional quality at an attractive price 

page 40

headbands, shooting caps Etc. 

about our product 

Our latest innovation is found in the iris itself... 

The surface coating on the material used for the construction of our irises is one of the latest technological breakthroughs in Gehmann’s 

programme. 

It is designed to permit flexing of the iris leaves without degradation of the material through prolonged use, to eliminate oxidation and to 

preserve the matt black anti-glare finish essential to any form of sight. 

If you are a shooter wishing to use the latest technology Gehmann is the name to remember ! 

395 headband with iris 

• velcro-fastening headband with flip-up adjustable iris to improve 

depth of field 

• the iris can be moved on the carry plate to suit your position 

• iris leaves with our latest surface coating - see above 

• for pistol shooters not wanting frames or their associated cost 

397-N 

397-N headband, iris and eyeshield 

• as 395, but with I.S.S.F. light, flip-up eyeshield 

• good value for money 

373 headband, 23mm lens holder and eyeshield 

• velcro-fastened blue headband 

• 23mm articulated lens holder 

• 30mm flip-up eyeshield - cased 

374 headband, 37mm holder 

& eyeshield 

• velcro-fastened headband 

• 37mm lens holder 

• I.S.S.F. flip-up eyeshield - cased 

349 Knobloch headband 

• velcro-fastening headband 

• 30mm flip-up eyeshield 

348 Knobloch headband 

• velcro-fastened headband with 

shooting frame and lens holder - cased 

page 41

headbands, shooting caps etc. 

444 & 449 headbands 

model band velcro eyeshield 

449-N blue white (30mm) 

449G-N blue grey (30mm) 

449 blue white 

449G blue grey 

444BW-N blue white (30mm) 

444GW-N grey white (30mm) 

444RW-N red white (30mm) 

444BG-N blue grey (30mm) 

444GG-N grey grey (30mm) 

444RG-N red grey (30mm) 

444BW blue white 

444BG blue grey 

444GW grey white 

444GG grey grey 

444RW red white 

444RG red grey 

446W-N 

446 eyeshields 

white (30mm) 

446G-N grey (30mm) 

446W with white 

446G sideshield grey 

446W-N 446G-N 446W 446G 

443.SG 

65% cotton 

35% polyester 

443 445 

80% cotton 

445.B 

20% polyester 

443.SG green & Black 

443 red & blue CAPS 

• velcro-closure to suit all sizes 

• inner sweatband 

• ventilated top for coolness 

• velcro-fastening sideshields and eyeshield 

445 red & 

445.B Blue summer caps 

• for summer or hot climates 

• completely open top 

• fully adjustable for all sizes 

• extra long peak 

• sideshields easily positioned 

page 42

headbands, shooting caps Etc. 

445 

375 cap 

• adjustable closure to suit all sizes 

• 23mm holder and I.S.S.F. light eyeshield 

376 cap 

• width adjustable closure as 375 

• adjustable 37mm lens holder 

• 30mm flip-up eyeshield 

704.V MEC visor 

• velcro-closure 

447 & 447-s Gehmann visors 

• two peaks of different lengths: 

1. long for standing and kneeling 

2. short for prone 

• velcro-closure and velcro attached peaks for ease when changing 

• 447: navy and dark grey 

447-S: black 

1) 

2) 

448 standard visor 


• blue and black 

448-S visor 


• black 

page 43

clothing 

canvas and leather quality 

401 

• softer stretch material under-arm, inside elbows and on the inner sleeve for improved comfort 

• patented cut to upper arm and chest area eliminates material tucks and avoids interference 

with the stock 

• double canvas guarantees long-lasting rigidity 

• inner canvas also gives improved rigidity but remains comfortable shooting 3-P 

• the sling loop precisely locates height, angle and three choices of sling attachment: 

1. using the hook through the sling‘s cut-out 

2. having the sling resting in the sling loop 

3. having the sling resting in the hook itself 

• personal colour combinations are available to order 

• made-to-measure option 

• suede panels give comfort in 

non-critical areas and supports your 

elbow pad while standing 

• suede panels on chest and top of arm gives 

stable contact between the surface to 

maintain the shooter‘s position 

• ‘Top-Grip‘ rubber 

on shoulder 

and elbows for 

improved grip 

• pierce-through 

buttons allow 

personal 

tailoring 

Although all criteria were 

double-checked prior to launching 

this jacket we have endeavoured 

to improve it further still with the 

following: 

1. tension straps for the shooting shoulder are now external 

2. top buttons have been moved in sympathy with the new cut 

at the top redesigned not to interfere with the rifle stock or 

the supporting arm when in the standing position 

3. the suede front has been widened to improve both, 

the non-slip area and the aesthetic appeal 

4. inner sleeves are made of soft material, without stitching, 

to avoid disturbing tucks - patented design 

page 44

clothing 

velcro fly and multi-hook belt 

426 double canvas trousers 

• identical material and tailoring quality to the 401 jacket 

• remains rigid longer for extended wear and greater support 

• three-way zips behind the leg eliminate material tension behind 

the knee - one of the zips is curved along its length to avoid 

interference from the zip - adjustment is quick and easy 

• velcro fastening fly from waist to top of thigh combines with 

an inset lower gusset to provide greater comfort when kneeling 

• softer material panel over the thigh muscle helps kneeling 

• ‘Top Grip‘ on seat and legs eliminate unnecessary movement 

• available made-to-measure 

three-way zip runs around the leg 

outer material: 

inner material: 

100% canvas 

`Top-Grip´ rubber 

100% canvas 

outer material: 60% canvas, 

40% leather 


inner material: 100% canvas 

401 

• personal colour combinations of 

your choice are available to order 

page 45

clothing 

403 double canvas jacket 

• redesigned again, this popular jacket now incorporates ‘Amara‘ non-tear material for supple 

and strong support across the upper back, upper inside arms and on the top chest strap 

• patented soft seamless inside fore-arm material and patented button loops provide terrific 

value-for-money, making this jacket extremely suitable for entry-level or club shooters wanting 

proper support without the expense of a high quality jacket used by an international shooter 

• mainly double canvas 

• pierce-through buttons provide precise fit 

• very dark blue and black with white 

• not available made-to-measure 

outer material: 80% canvas 

20% amara 

rubber 


page 46

clothing 


• double canvas trousers to match 403 

• deep blue and black with designer panels to assist 

shooting but also to give style to the complete suit 

• velcro fly and waist fastening 

• full-length two-way zip behind the leg remove pressure 

points when kneeling 

• the rigidity prevents unwanted movement in any position 



rubber 


jackets and trousers for all levels from 

beginners to champions 

409 junior & club 

• mainly double canvas but overall very light 

• ambidextrous 

• upper back and sleeves are now made with ‘Amara‘ a new 

softer non-rip material which has the double advantage 

of providing strength with comfort 

• both shoulders padded for the rifle`s butt 

• the sling attachment can be moved for left or right 

shooter and is adjustable for it`s length 

• over-the-shoulder tension straps both sides 

• junior sizes only - enquire 

• unbelievable price ! 


25% amara, 

rubber 


page 47

clothing 

aren`t they a lovely couple ? 

404 canvas and leather jacket 

• for men, in rigid unbleached canvas with blue suede panels and blue trim 

• cut to maximize support and comfort in all positions 

• pierce-through buttons enable personalising a perfect fit 

• over-the-shoulder straps remove tucks on the shoulder pad 

• adjustable sling strap with a hook designed to match our slings 

• anti-slip rubber on elbows ensures a stable position 

• suede front panel supports your elbow pad when standing 

• also available in special sizes for people who are slightly shorter and have 

a larger stomach - if required please contact your dealer 


over-the-shoulder tension straps 

fully adjustable sling loop 

jacket: 

outer material: 50% leather + 50% canvas 

rubber 


404 

also available in special sizes: 

25, 26, 27, 28, 29 + 30 - for people 

who are slightly shorter and have a 

larger stomach 

page 48

clothing 

404.R canvas and leather jacket for ladies 

• as 404 but trimmed red for the ladies 

• a first in shooting clothing - a deliberately matched 

male and female jacket - suitable for `him and her` 

• smaller ladies’ sizes only 

buttonholes are 

trimmed 

in red leather 


• designed to match the 404 jacket 

• primarily unbleached canvas for rigidity 

• colour matched vertical panels - trimmed in blue 

• cut for greatest support in all positions 

• velcro-fastening waist band and the belt loops are matched with blue leather 

• velcro fly 

• soft top of thigh inserts eliminate tension when kneeling 

• vertical three-quarter length two-way zips are positioned behind the leg 

• ambidextrous fitting 


trousers: 


rubber 


427.R double canvas 

trousers 

• trimmed with red to match 404.R 

• velcro-fastening waist 

• smaller ladies’ sizes only 

page 49

clothing 

competitive style 


• double canvas construction affords maximum rigidity and support for 

all disciplines, however our use of softer, elasticated black material in 

the under-arm and crook of the elbow provides good comfort in all 

shooting positions 

• two tension straps are included over the shooting shoulder to 

eliminate tucks on the shoulder pad 

• `Top Grip´ rubber on all non-slip surfaces 

• swivelling and infinitely adjustable sling strap 

• personal tailoring with pierce-through buttons 

• white with navy panels 



3% leather 

`Top Grip’ rubber 



• a rigid canvas outer layer over a softer canvas inner lining 

• elasticated under arm and inner elbow to give the best comfort 

• `Top Grip´ rubber on shoulder and elbows 

• over-the-shoulder straps to remove tucks on the 

shoulder pad 

• revolutionary sling attachment incorporates an artificial 

material strap punched with metal ringed holes to 

reduce wear - design enables precise 

sling settings in height and angle 


• mainly white with black 



2% leather 



422 double canvas 

trousers 

• double canvas quality to match 414 

• in black and white to compliment 419 

• velcro fly with 3 hook 2“ waistband 

• waistband accommodates a broad belt 

• extra long two-way zip to relieve any rear 

leg pressure and to aid comfort when 

the legs are bent 

• `Top Grip´ rubber surfaces match 414 + 419 



5% leather 



page 50

clothing 

405 men and women 

matched jackets 

• blue for the boys and red for the girls.... 

• double canvas 

• soft lined inner sleeves 

• soft elasticated inside elbows and under arm 

• pierce-through buttons for personal tailoring 

• over-the-shoulder tension strap to remove 

tucks 

• adjustable sling strap with a hook designed 

to match our slings 

• competitor number clips on the back 



rubber, 


page 51

clothing 


60% canvas, 40% leather, 

rubber 


100% canvas 

400 double canvas 

shooting jacket 

• redesigned cut across the shoulder 

to remove material tucks, changed 

to softer, seamless inside upper arm 

material and introduced new patented 

button loops 

• mainly double canvas 

• extremely rigid but with soft panels in 

critical areas to provide better comfort 

and support in all positions 

• suitable for all disciplines 

• anatomically cut for all shooting 

positions 

• over-the-shoulder straps remove tucks 

on the shoulder pad 

• anti-slip rubber on the shooting 

shoulder and elbows 

• suede front panel supports your elbow 

pad when standing 

• personal tailoring with pierce-through 

buttons 



rubber 


423 canvas trousers 

• material and colours match 400 

• suits right- or left-hand shooters 

• front thigh cut-outs for kneeling 

• full length zips avoid discomfort 

• bolstered anti-slip rubber seat for best support 

and matching knee panels to eliminate creep 

• velcro fastening waist 


page 52

clothing 

418 leather and canvas jacket 

in a superbly supple leather which allows unbelievably easy personal tailoring for fit - once done it is delightful to wear and incredibly popular 

with all types of rifle shooter benefits from a totally neutral but practical colour combination canvas lined to provide essential support and 

rigidity when needed 

• anatomically cut in manufacture to ensure the best possible fit when new but easily tailored to suit your shape when in the shooting position 

• elasticated straps under arm and on the inner elbow give great support and comfort 

• over-the-shoulder straps remove tucks on the shoulder pad 

• anti-slip rubber at shoulder and elbows 

• finished in a durable black and white 

• personal tailoring possible with pierce-through buttons 

• available in special sizes for people who are slightly shorter and have 

a larger stomach - if required please contact your dealer 



100% leather, 

rubber 


100% canvas 

page 53

clothing 

outer material: 95% canvas + 5% leather, 

rubber 


416 canvas jacket 

• designed for the European seniors‘ discipline but 

suitable for shooters wanting good standing support 

without sleeve restriction 

• suits match air rifle shooters and warmer climates 


• available in special sizes for people who are slightly 

shorter and have a larger stomach - if required please 

contact your dealer 

special equipment for 

the seniors‘ discipline 

842 rearsight extension base 

835 alloy butt pad 


100% leather, 

rubber 


100% canvas 

417 leather & canvas jacket 

• mainly black and white leather outer with inner canvas 

and similar in style and quality to the excellent 418 

• special very short sleeve design for the special German 

seniors‘ standing discipline where the rifle is rested on 

a stand 

• upper inner back and the short sleeves are lined 

with a soft micro-mesh material designed to provide 

maximum comfort 

• ambidextrous 


• available in special sizes for people who are slightly 

shorter and have a larger stomach - if required please 

contact your dealer 


page 54

clothing 

do you need both belt and braces ? 

429 pierce-through buttons 

• threaded buttons suit all canvas and leather jackets 

and trousers 

• specify large (429G) or small (429KS) 

• black only 

486 buttoning aid 

• a simple hook to aid buttoning jackets and trousers 

• very quick and easy to use 

428 belt 

• made of the same artificial material as our 

single-point sling 

• double hook and stepped adjustment holes 

424 braces 

• 35 mm wide 

• snap-clip fitting 

• blue 

85% polyester 

15% elastan 

424HK Dutch-cross braces 

• 35 mm wide 

• button fitting 

• blue 

424 Profi braces 

• designed not to interfere with 

the rifle butt 

• 35 mm wide - one-side-only 

• black 

281 2mm `Top Grip´ 

• 95 x 45cms sheet of `Top Grip´ 

rubber for old or worn surfaces or 

for use on other garments 

282 2mm `Top Grip´ 

• 95 x 95cms, 2mm thick 

282-4 4mm `Top Grip´ 

• 95 x 95cms, 4mm thick 

Top-Grip 

This material was created years ago for Gehmann jackets, trousers and gloves. It is now the accepted industry standard 

where greatest grip is required. 

Specifically used in areas where shooters make contact between themselves and other parts of their 

shooting equipment - or where two areas meeting require absolute security of position. 

The material is attached to a pliable rear surface which aids machining and later attachment to the areas in question. 

When pressure is applied the `Top Grip´ high spots depress slightly to provide a non-slip contact area. 

This platform is one Gehmann use to maximum advantage. Although expensive in production there is no substitute. 

Gehmann would like you to shoot with the best - so cost is put aside in our aim to give you the very highest quality. 

488 200ml canvas stiffener 

• `COTTONFIX´ is a prepared substance manufactured to provide original rigidity to canvas clothing 

page 55

clothing + EAR Protection 

stylish & practical undergarments Designed to give 

You the greatest comfort in all climatic conditions 

475 shooting underwear 

• extremely elastic and providing a tight fit to avoid 

high spots under other shooting garments 

• anti-allergic material to suit all skin types 

• no.7 sun-factor protection in the material 

• designed for to be warm in winter and cool in summer 

• resistant to absorbtion of other colours 

• easy-care, easy-wash, quick-drying material 

• long wearing 

• manufactured with ecological sensitivity in 

a 100% poly mix 

• black 

• available sizes: small - medium - large - extra large 

476 vest 

• with padded elbows - sizes as above 

477 leggings 

• available sizes as 475 above 

721 MEC ear plugs 

• membrane for good filtration - cased 

724 Peltor defenders 

• thicker insulation providing higher levels of protection 

• collapsible, weight: 180grms - black 

727 Arton 1000 ear defenders 

• extremely comfortable, collapsible, weight: 240grms - beige 

728 peltor Defenders H4a 

• normal padding, collapsible, weight: 150grms - blue 

731 ear defenders, small-bore 

• good padding, collapsible, weight: 190grms - red 

733 ear defenders, full-bore 

• thick padding, collapsible, weight: 250 grms - blue 

727 

720 EAR plugs 

• foam plugs in packs of ten 

725 Silencio EAR Plugs 

• with a metallic membrane - cased 

725 

728 

733 

721 

720 

724 

731 

page 56

gloves 

Gehmann Gloves 

The reason we strive so hard to produce a glove that is both anatomically perfect for the hand and promotes confidence in the shooter is the 

same as all other Gehmann products - a continual search for overall perfection as a whole. 

In the spectrum of the shooter‘s needs it is imperative the glove forms a pivotal part and contributes to the total picture - not just a single 

item on its own. 

Top scores are only achieved with modern equipment designed at the outset to eliminate any chance of movement, shot after shot. 

If evidence is needed just take a look at any shooter near you wearing a smooth, worn-out 10-year old glove and ask what chance they have? 

Eliminating movement in all your equipment is the name of the game - so try to see the big picture and make sure you give yourself a hand 

when next using a rifle - treat yourself to a new Gehmann glove. This may be one of the cheapest and most productive items you buy... 

466 half-cover glove 

• redesigned to be anatomically perfect 

• for shooters preferring to feel the rifle 

or not use a full-cover glove 

• ideal for warm or hot conditions 

• maximum I.S.S.F. width elasticated wrist 

• dark blue leather 

• extra small, small, medium, large, 

extra large and extra extra large 

• best quality leather 

gives great comfort 

and extremely long 

life 

• air holes aid 

comfort through 

long disciplines 

and also in 

hot conditions 

• cut and shaped 

to your hand when 

in position with 

your rifle 

• maximum 

elastication around 

the wrist to I.S.S.F. 

standard 


100% leather, 

rubber 


34% wool, 

33% cellulose, 

33% polyester 

467 half-cover glove with Top Grip 

• best quality black and white leather 


• soft and comfortable lining 

• `Top Grip‘ rubber for non-slip grip 

• extra small, small, medium, large, extra large and 

extra extra large 


100% leather, 



34% wool, 


33% polyester 

ALL GLOVES ARE AVAILABLE FOR RIGHT- OR LEFT-HAND SHOOTER 

page 57

gloves 

468 5 finger glove 

• finest cowhide leather and our top glove 

• precisely tailored, cut and shaped for the hand 

when supporting the rifle 


• large expanses of `Top Grip´ rubber 

• attractive finish in black and white 

• extra small, small, medium, large, extra large and 

extra extra large 


100% leather, 



34% wool, 


33% polyester 


100% leather, 

rubber 


34% wool, 


33% polyester 


• best quality leather 

• pimple rubber across the palm and back provide perfect 

stability 

• comfortable padded internally 


• anthracite green, black and white 

• small, medium, large, extra large and extra extra large 

465 fingerless glove 

• a full rubber glove with micro-mesh breathable supple 

panels at critical joint positions 

• ideal for shooters wishing to not have a fully covered hand 

or those in warmer climates 

• attractive red contour line on back 

• soft comfortable padding 


• extra small, small, medium, large and extra large 


80% fome mesh, 

20% artificial leather 

rubber 


34% wool, 


33% polyester 


80% Amara, 

20% artificial leather 

rubber 


34% wool, 


33% polyester 


• primarily Àmara`- a soft but non-rip 

material with excellent strength and 

breathable properties 

• super internal padding for comfort 

• anatomically cut for perfect fit 


• first and second finger web gives 

added support for all disciplines 

• black and white 

• extra small, small, medium, large and 

extra large 

page 58 

ALL GLOVES ARE AVAILABLE FOR RIGHT- OR LEFT-HAND SHOOTER

gloves 


• artificial leather and attractive blue micro-mesh 

material but primarily rubber covered 

• attractive blue and black combination 

• non-slip rubber for maximum security 




80% fome mesh 

20% artificial leather, 

rubber 


34% wool, 


33% polyester 


60% artificial leather, 

40% Amara 

rubber 


34% wool, 

33% viscose, 

33% polyacryl 

470 fingerless glove 

• anatomically cut for perfect fit 

• ideal for shooters wishing not to have a fully covered 

hand or those in warmer climates 

• soft comfortable padding 

• light grey, black and white 


• extra small, small, medium, large, extra large 

462 slim-line padded glove 

• a very lightweight glove with an exposed thumb and special pads 

for shooters prefering less glove around their hand 

• provides excellent contact with your weapon 



65% leather, 

15% Amara, 

10% cotton, 

10% nylon, 

rubber 

65% Amara, 

15% neoprene, 

10% cotton, 

10% nylon 

463 Featherweight 

trigger hand glove 

• exclusively for the trigger hand and designed to 

maintain warmth in very cold conditions but also 

to assist your grip in hot conditions when there is a 

chance of perspiration 

• secure grip is achieved by a small pad in the palm 


SPECIAL ATTENTION IS CALLED TO ORDERING AS THIS 

GLOVE IS UNIQUE - YOU MUST SPECIFY WHICH HAND 

IT IS TO FIT !!! 

ALL GLOVES ARE AVAILABLE FOR RIGHT- OR LEFT-HAND SHOOTER 

page 59

oots 

putting your best foot forward 

building from a solid base 

The importance of eliminating as much movement as possible during shooting is well understood. What seems really quite remarkable, is 

shooters recognize this and take trouble to equip themselves with many close-fitting items of clothing but entirely forget about one of the 

weakest areas of body control - the ankles. 

Rigid ankle support is a must if other positional control areas are to benefit. 

Obviously this is essential for standing and kneeling disciplines but many shooters are guilty of under-estimating the importance of solid 

shooting boots for prone disciplines. 

• four fast-loops for quick lacing 

• rear velcro fastening with 

two easy straps 

new rigid flatter 

sole-bed 

• over the instep ratchet 

provides easy-to-use 

fastening with quick release 

• flat-bed sole to ensure absolute stability 

482 leather shooting boots 

• best quality thick leather toecap and ankle supports with the supple suede upper foot panel give an extremely long service life with the 

added benefit of an attractive finish 

• designed to minimize torque - the problem that allows the ankle to twist over the foot and spoil shots 

• anatomically cut for most stable support and comfort when shooting all disciplines 

• constructed over a rigid foot-bed ensures maximum support at the sole 

• twin velcro heel strap fastening 

• standard lacing with a ratcheting clip-over instep fastener 

• blue and black 

• 3 1/2 to 13 

484 micro-mesh 

lightweight boots 

• mainly black and grey with large breathable mesh panels and 

a soft, comfortable inner lining 

• standard front lacing but double velcro-closure straps at rear 

• micro-mesh material designed to provide maximum comfort 

• whole sizes only from 37 to 48 - refer to our size table 

nearly seamless junction 

between sole and shoe 

U.K./CONTINENTAL 

3½ 4 4½ 5 5½ 6 6½ 7 7½ 8 8½ 9 9½ 10 10½ 11 11½ 12 12½ 13 

36 36⅔ 37⅓ 38 38⅔ 39⅓ 40 40⅔ 41⅓ 42 42⅔ 43⅓ 44 44⅔ 45⅓ 46 46⅔ 47⅓ 48 48⅔ 

page 60

oots 

481 leather shooting 

boots 

• heavy suede outers in a deep purple and grey 

• front lacing and twin velcro heel fastening 

• anatomical footbed 

• 3 1/2 to 13 

483 pistol shoes 

• thick leather with suede overlay and soft ankle pad 

• anatomical footbed 

• black, blue trim and red piping 

• 3 1/2 to 13 

489 shoe tree 

• an adjustable footplate to maintain sole flatness 

• simple toe and heel clip holds the item in position 

• is easily adjusted and set 

490 & 492 leather kneeling rolls 

• uses best quality leathers 

• an end zip for filling and a leather carry handle 

• blue, black, red or green 

• 492 is as 490 but ready filled with cork chips 

491 & 493 vistram rolls 

• as 490 but a synthetic material 

• hard wearing 

• black only 

• 493 as 491, but ready filled with cork chips 

494 & 495 leather kneeling rolls 

• similar in all respects to 490 but with elongated 

rubber strips around the roll 

• turquoise, lilac and black 

• 495 as 494 but ready filled with cork chips 

cork filling 

page 61

slings 

Keeping it together 

stable buckles 

latest non-stretch material for long-life 

and consistent position when used 

set for circumference with lock screws 

non-slip inside cuff with 

cut-out for our hook 

micro-adjustable universal joint gives 

precise length and unobstructed use 

431 micro-adjustable sling with universal joint 

• manufactured from artificial non-stretch material 

• two separate sections - round arm and to rifle 

• sections are coupled through a threaded universal joint giving micrometrical length adjustment and full articulation 

• the threaded adjuster is easily accessible when shooting 

• the cuff can be tailored to the size of your upper arm with two lock-screws on the inside which pass through the sling - and a buckle on 

the outside 

• a cut-out on the cuff of the sling accepts the 439 hook attached to our jackets (this item is available as a spare) 

• special rubber inside the cuff eliminates creep around the arm 

436 artificial sling - GREEN 

• manufactured from composite nylons 

• two separate sections - round arm and to rifle 

• the cuff can be tailored to the size of your upper arm with two lock-screws 

on the inside which pass through the sling - and a buckle on the outside 

436.b artificial sling - blue 

page 62

slings 

437 pulse-free micro-adjustable 

• completely free inside upper arm contact eliminates any possibility of creating unwanted pulse on the rifle 

• adjustable round-the-arm cuff 

• inside and outside cuff swivel attachment points enable any angle of sling to cuff 

• sling can be detached from the swivels if required 

• micro-adjustable for length of sling from cuff to rifle 

• pre-set length is achieved previously in the normal way 

• non-stretch 

• universal for right- and left-hand shooters 

435.B micro-adjustable artificial sling - blue 


• micro-adjuster for precise length from arm to rifle 

• micrometrical length adjustment is easily accessible when shooting 

• the cuff can be tailored to the size of your upper arm with two lock-screws 

on the inside which pass through the sling - and a buckle on the outside 

435 micro-adjustable 

artificial sling - green 

• micro-adjuster for precise length from arm to rifle 


• micrometrical length adjustment is 

easily accessible when shooting 

• cuff adjustable as 431 

page 63

slings 

430 leather sling 

• best quality leather with non-slip rubber inside cuff 

• stepped sizing round the cuff with loop for overlap 

• double prong buckle for length of sling 

from shoulder to rifle 

433 junior leather sling 

• as above, for juniors and ladies 

432 artificial sling 

• designed as 430 but made of artificial non-stretch material 

• great value for money 

• this sling offers the opportunity of non-stretch positional security and 

long service life by use of the very latest manufactured materials 

439 coat hook 

• can be attached on any jacket sleeve 

• provides a consistent sling position 

438 40 mm sling claw - I.S.S.F. 

page 64

gehmann morini pistol 

Gehmann GP-1 match air pistol 

• rearsight adjustable for height, 

width and blade cut-out 

• precision steel barrel 

• compensator 

• movable 

foresight blade 

• walnut rake-adjustable 

anatomical grip 

• fully adjustable 

trigger 

• alloy frame 

assists balance 

• detachable cylinder 

with gauge 

G.100 Gehmann GP-1 

• the first match air pistol designed exclusively for Gehmann 

• easy operation top load lever suitable for left- or right-hand shooter 

• easy-load pellet feed 

• detachable cylinder with end gauge 

• fully adjustable heavily stippled anatomical walnut grip with good over-the-hand backstrap; 

rake-adjustable for angle and bent 

• trigger mechanism adjustable in all senses 

• dry-fire mechanism 

• rearsight adjustable for elevation, width and the blade cut-out 

• muzzle compensator to eliminate flip and recoil 

• foresight blades interchangeable 

• 4.5mm foresight fitted standard - options are: 3.5, 4.0, 5.0 + 5.5mm (extra) 

• cased with charging adaptor, all necessary tools, full instructions and pellet test group 

G.130 GP-1 stainless counterweight rod 

with moveable weight 

• easily screwed to trigger guard 

• 60grms weight 

TECHNICAL SPECIFICATION 

GEHMANN GP-1 

calibre 4.5 mm/.177 

length 415 mm 

height 190 mm 

width 49 mm 

weight 930 grms 

barrel length 240 mm 

sight length 335-380 mm 

trigger mechanical 

page 65

morini 

MORINI - the Olympic champions´ choice 

• muzzle compensator eliminates 

barrel flip and dampens recoil 

• Lothar Walther precision barrel 

for the best accuracy 

• detachable and interchangeable 

cylinders with end gauge are 

easily filled and fitted - adaptor 

supplied 

• trigger can be adjusted 

for first and second stage, 

weight and length of travel 

and the blade can easily be 

positioned for reach 

• Morini anatomical grips are 

manufactured in many sizes 

M2400 Morini 162.EA 

and ensure perfect feel 

• can any pistol be better... winning medal after medal! 

• uses natural air avoiding any temperature and pressure problems 

• cylinder pressure gauge for peace of mind 

• cylinders provide approximately 160 shots when charged to 200-bar 

• unique low-pressure lock hooks into the load-lever in the event of a pressure failure 

during shooting 

• the electronic trigger live- and dry-fire operation are unique in that both feel 

identical to the finger, pulling the trigger merely closing a switch, so there is 

no interlink to give a false practice sensation 

• twin AAA batteries give 15,000 shots 

• on/off switch and auto shut-down if accidently left switched on 

• pulse red light indicates battery condition is satisfactory 

• Lothar Walther precision barrel for the ultimate in accuracy 

• Morini’s own anatomical adjustable wooden grips - right- or left-hand 

• muzzle compensator eliminates barrel flip and recoil 

• 5.0mm foresight fitted standard - 4.0, 4.5, 5.5 and 6.0 mm available (extra) 

• matt black body, blued steel barrel with two different colour cylinders 

• in a rigid padded case profiled for pistol and the factory supplied accessories with 

provision for match pellets and a scoring gauge 

• with brass charging adaptor (DIN, 200-bar thread), air discharge tool, 

all tools for stripping, full instructions, pellet test group and guarantee 

• electronic mechanism has 

battery condition pulse light 

and auto shut-down 

if unused 

M2500 Morini 162.EA-Short 

• as the 162.EA but with shorter barrel and cylinders 

• only 960 grms weight 

• 200-bar operating pressure gives 140 shots 

• for ladies and juniors or those with weaker wrists 


Morini 162.EA + titanium 162.EA-SHORT 

calibre 4.5 mm/.177 4.5 mm/.177 

length 410 mm 370 mm 

height 140 mm 140 mm 

width 50 mm 50 mm 

weight 1040 grms 960 grms 

barrel length 240 mm 190 mm 

sight radius 310-360 mm 300-350 mm 

trigger electronic electronic 

page 66

morini 

M2100 Morini 162.EA-titanium 

• as M2400, but frame, compensator and both cylinders 

in a stylish titanium finish 

M2300 Morini 162.M 

• design per the 162.EA but with a mechanical trigger 

• with one detachable cylinder, others available at extra cost 

• cylinder fitted with pressure gauge 

• low-pressure lock to load-gate lever ensures security of shots 

• cased - for equipment specification see 162.EA details 

M2600 Morini 162.M-Short 

• as 162.M with shorter barrel and cylinder 

• only 940 grms weight 

• 200-bar operating pressure gives 140 shots 

• for ladies and juniors or shooters with weaker wrists 


Morini CM162.m CM162.m-SHORT 

calibre 4,5 mm/.177 4,5 mm/.177 







trigger mechanic mechanic 

Morini accessories 

M260 60 grm barrel weight 

• attaches to the 162 barrels 

• clamps on with two outer moveable bars 

• four weights can then be slid along the bars to suit 

M261 60 grm cylinder weight 

• clamps to the cylinder boss 

• single bar with two moveable weights 

M262 80 grm cylinder weight 

• two bars with two moveable weights 

M262 

M261 

M260 

M263 60 grm weight set 

• set of 4 x 15grm weights for sliding down 

the barrel 

• position to your preference 

M281 compensator 

• for all 162 models 

M281 

M263 

page 67

morini 

M2800 Morini 22.M .22 lr standard pistol 

• a matching family of Standard pistols with revolutionary features 

• uses direct bullet-feed from magazine to breach rather than between magazine lips 

which can cause rim or bullet-nose damage, misfeeds and subsequent jams 

• hammer spring tension adjustable by the shooter 

• can easily be regulated for velocity of any ammunition 

• lowest sight line of current production small-bore Standard pistols 

• rearsight has adjustments for elevation, windage and the blade cut-out width 

• complete disassembly made easy by use of only two main screws - one through the 

grip and one for the frame 

• manufactured in steel and alloy only - no artificial materials which may cause wear 

or malfunction problems over time 

• full range of adjustable walnut grip options available 

• supplied in a rigid carry case 

• conversion kit for .32 is not available for this dedicated .22 design 

M2800-ALU Morini 22.M-ALU 

.22 lr standard pistol 

• as M2800, but mainly constructed of alloy with a steel barrel 

for lightness and balance 

• weight unloaded is only 950grms 

M251 set of 3 x 40 grms 

barrel weights 

• for M2800, M2800-ALU + M2850RF 

M2850RF - Rapid Fire 

• as M2800, but modified for rapid fire 


Morini 22.M + 22.M-RF 22.M-Alu+Alu-RF 

calibre .22 lr .22 lr 






sight radius 220 mm 220 mm 

trigger mechanic mechanic 

page 68

morini 

• movable foresight blade 

• Lothar Walther barrel for 

highest precision 

• adjustable trigger 

M2700-L Morini 84.E-Light 

• as 84.E, but 100grms less weight 

• factory wrap-around grip 


Morini 84.E 84.E-L 

calibre .22 lr .22 lr 







trigger electronic electronic 

M2700 Morini 84.E .22 lr free pistol 

• electronic mechanism gives minimum lock-time from trigger release to fire 

• ball and socket pivotal points provide friction-free action 

• accidental discharge due to the light trigger is guarded by a light beam sensor 

spanning the trigger guard. Not until the finger is correctly positioned to the 

trigger will this circuit close opening that of the trigger 

• trigger pressure is variable: factory set at 0-22 grms - but the pistol comes 

with two other pressure springs giving 22-160 grms and 160-300 grms 

• dry-fire possible 

• battery life gives approximately 5,000 shots 

• Morini wrap-around anatomical grip: right- or left-hand, is factory fitted 

• Lothar Walther precision barrel 

• micro adjustable rearsight 

• muzzle compensators M.271 or M.271-L available (extra) 

• standard with 5.0mm foresight - options are: 3.5, 4.0, 4.5, 5.5 + 6.0mm (extra) 

• in a rigid case with instructions, tools, cleaning rod and guarantee 

accessories 

M273 barrel weight - 70 grms 

M271 compensator 

M271-L long compensator 

M273 

M271 

585-FP universal barrel spirit level 

• a first for free pistol and long-arm barrels 

• can be positioned along the bar as required 

• level is radially adjustable for cant - a friction collar 

holds your setting without need of more tools 

• quick acquisition of bubble picture 

• slow bubble 

• clamps to barrels of 14 - 18mm diameter 

• special material elimates 

marks on barrels 

• suitable for 

right- or left-hand shooters 

• lightweight 

M271-L 

page 69

morini + röhm 

MORINI anatomical GRIps 

manufacturer: 

models: 

Colt 

Government and Python 

FAS 

601, 602, 603, 604, 606, 607, 609 and Gehmann F4000 

Feinwerkbau 65, 80, 90, 2, 100, 102, 103, C.5, C.10, C.20, C.25, C.55, P.30, P.34, P.40 + Basic, P.44, P.55, P.56 + P.58 

Hämmerli 150, 152, FP60, 208, 220, 232, 240, 260, 280, SP.20 .22 l. r., 480, 480.K and 480.K2 

Morini 84.E, 102.E, 162.E, 162.EA + -Titanium + -SHORT, 162.M + -SHORT, 22.M + -RF + -ALU and 32.M 

Sako 

22-32, Triace and Triace Short 

Steyr 

Match LP.1, LP.2, Match LP.5, Match LP.1-P, LP.10, Match LP.5-P, LP.50-P and Match FP 

Smith & Wesson H.B.41, K.14-19-66, 686-586, K+L frames and M.52 

TOZ TOZ 35 

Unique DES/69 .22 lr, DES/69-U, DES/2000-U-22 short and DES/32-U .32 

Walther 

CP.1, CP.2, CP.2 Match, CP.3, CP.3 Match, CPM Atlanta, CPM.1, LPM.1, LP.200, CP.200, LP.201, CP.201, 

GSP-Expert .22 lr LB + Expert, GSP .32 S&W, KSP.200, OSP and OSP.2000 

others 

Anschütz LP@, Beretta 89, 92 + 98, Erma ESP, High Standard Military C., IJ.35, Korth Revolver, 

Manurhin MR73, Olympic .22 lr, Pardini K2, K60, K90, SP, HP, MP, Ruger MKII and SIG P210 

M295 Morini compound 125ml 

• compound and hardener providing a perfect hand to 

pistol grip shape - easy to apply and simple to use 

M296 Morini compound 750ml 

• bulk quantity for industrial use 

R.130 Röhm Twinmaster - Match 

• pre-charged pistol with match length barrel 

• one pre-charged cylinder with gauge 

• counterweight bar that rotates as a rest - muzzle compensator 

• anatomical adjustable wood grip - options as Sport (below) 

• cased with charging adaptor, instructions, tools, etc. 

R.120 Röhm Twinmaster - Sport 

• pre-charged pistol with match length barrel 

• one pre-charged cylinder with gauge 

• under-barrel counterweights 

• muzzle compensator 

• grips in small + medium right-hand and medium left-hand 

• cased with charging adaptor, instructions, etc. 

R.100 Röhm Twinmaster - Top 

• cheap pre-charged pistol with 8-shot or single-shot magazines 

• one pre-charged air cylinder and gauge 

• grips in small and medium right-hand and medium left-hand 

• cased with charging adaptor, etc. 

page 70 

R.107 Röhm Twinmaster - Allrounder 

• the cheapest pre-charged pistol on the market! 

• ambidextrous grip suitable for all shooters 

• ideal for junior, lady or club beginners 

• enables pre-charged recoil-less shooting at a rock-bottom price 

• single pre-charged air cylinder with gauge 

• cased with charging adaptor, tools etc. 

R.125 Röhm Twinmaster - Trainer 

• designed as a training weapon with more realistic feel of a full-sized gun 

• 8-shot magazine 

• better two-stage trigger 

• grip options as Top (above) 

• CO² operation

match morini guns 

• micro adjustable rearsight 

• selected steel precision barrel • compensator 

• twin detachable 

cylinders with gauge 


anatomical walnut grip 

• trigger blade 

adjustable for 

reach and angle 

• adjustable counterweight rods 

with moveable weights 

innovative design combined with perfect balance 

MG.100E MG.1E match air pistol 

• the electronic trigger mechanism with dry-fire capability has a superb quick 

release force travel 

• 12V - A23 battery give more than 4,000 shots 

• rake-adjustable (fully adjustable in all directions) anatomical walnut grip in 

different sizes for right- or left-hand shooter 

• twin adjustable counterweight bars (carbon fibre) with moveable weights for 

perfect balance 

• two cylinders with end gauge 

• rearsight has adjustments for elevation, windage and the blade cut-out width 

• muzzle compensator eliminates barrel flip and recoil 

• the selected barrel is tested to assure the best precision on the rest 

• the foresight blade can be positioned in different distances to the rearsight 

• 4.5mm foresight fitted standard - options are: 3.5, 4.0, 5.0 and 5.5mm (extra) 

• supplied in a rigid padded case profiled for pistol and the factory supplied 

accessories with brass charging adaptor (DIN, 200-bar thread), 

all neccessary tools, full instructions, pellet test group and 

guarantee 


Match-Guns MG.1E 

calibre 4.5 mm/.177 

length 420 mm 

height 200 mm 

width 50 mm 

weight 980 - 1.100 grms 

barrel length 240 mm 

sight radius 305 - 330 - 365 mm 

dead travel up to 480 grms 

release force 30 grms 

trigger electronic 

page 71

morini match guns 

MG.200 MG.2 .22lr standard pistol 

Match Guns assemble their pistols in a dust-free environmentaly clean room 

to ensure as perfect a product as possible prior to entry - to service with you. 

The trigger design is by Cesare Morini whose reputation in the precision 

target pistol shooting world is already legendary. 

This model incorporates the unique characteristic of an under-barrel tubular 

magazine manufactured from a carbon fibre mix to ensure a slow but steady 

micrometrical shift in centre of gravity as rounds are used whilst maintaining 

minimal weight in the overall pistol`s design. 

• mechanical trigger by Cesare Morini 

• harmonised hammer and recoil action through the hand 

• under-barrel 5-shot tubular magazine 

• rake-adjustable anatomical grip compatible with and suitable for 

models MG.2E, MG.2+E rapid-fire, MG.4 and MG.1E 

• side muzzle weights are available in alloy or steel 

• rearsight adjustable for elevation, windage and blade cut-out 

• foresight sizes: 3.0, 4.0 + 4.5mm (3.5mm standard) 

• in a rigid case with instructions, tools, spare magazin, etc. 

MG.220E MG.2E Electronic 

standard Pistol 

• as MG.200 left, but incorporating an electronic trigger 

with a dry-fire capability 

• uses an A23 12-volt battery (supplied) 

MG.250E MG.2E electronic 

rapid-fire pistol 

• as MG.240 but with a superb electronic trigger 


MG.270 conversion 

• enables MG.2 and MG.2E to be converted to rapid-fire 

MG.240 MG.2 rapid-fire pistol 

• mechanical trigger 

• heavy barrel weight and superb recoil damping maintain 

pistol stability in the hand throughout the course of fire 

• uses a lighter slide, heavier foresight base and has four 

recoil dampers to produce the smoothest action when 

fired 

• low sight to barrel line gives the shooter excellent 

recovery 

• rear- and foresight options as MG.2 above 

• in a rigid case with spare magazin, instructions, tools... 

page 72 


Match-Guns MG.2 MG.2E MG.2E RF MG.2E RF 

calibre .22 lr .22 lr .22 lr .22 lr 

length 300 mm 300 mm 300 mm 300 mm 

height 140 mm 140 mm 140 mm 140 mm 

width 50 mm 50 mm 50 mm 50 mm 

weight 880-1150 grms 915-1185 grms 970-1160 grms 1005-1195 grms 

barrel length 152 mm 152 mm 152 mm 152 mm 

trigger mechanic electronic mechanic electronic

match morini guns 

standard with all our pistols: 

rigid carry case with egg-box profile foam 

and cut-outs in the lower half for the pistol 

including all accessories 

MG.500M MG.5 free pistol 

• mechanical trigger (convertable to electronic) with 

a dry-fire / ready-to-fire selection lever 

• four counterweight bars with moveable weights 

provide perfect balance in the hand 

• steel and alloy frame combination gives rigidity with 

minimal weight 

• in all directions fully adjustable wrap-around 

walnut grip 

• rearsight adjustments for elevation, windage and 

blade cut-out width 

• muzzle compensator eliminates barrel flip 

• 4.5mm foresight fitted standard - 3.5, 4.0, 5.0 and 5.5mm 

also available - extra 

• selected barrel for best precision 

• rigid case with instructions, tools, cleaning rod, etc. 

MG.550E MG.5E electronic 

Free pistol 

• as MG.500M left, but with electronic trigger 

including a dry-fire capability 


MG.280 MG.4 .32 S&W long 

• designed to match the MG.2 .22 lr. version 

• bullet extraction, hammer set and slide return are harmonised 

to provide an absolutely minimal recoil action to the shooter`s 

hand and arm axis - this aids follow through 

• foresight sizes: 3.0, 4.0 + 4.5mm (3.5mm standard) 

• in a rigid case with instructions, tools, spare magazin, etc. 

Match Guns pistols 

are all available to suit either 


and are manufactured in 

differing grip size options 


Match Guns MG.5 MG.5E MG.4 

calibre .22 lr .22 lr .32 S&W Long WC 

length 490 mm 490 mm 300 mm 

height 221 mm 221 mm 140 mm 

width 95 mm 95 mm 50 mm 

weight 1115 grms 1180 grms 950 - 1120 grms 

barrel length 290 mm 290 mm 152 mm 

sighting line 380-405-430 mm 380-405-430 mm 219 mm 

trigger mechanic electronic mechanic 

page 73

steyr 

S.750-S Steyr LP.10 - Silver 

• two cylinders with end gauge in silver, blue or gold - specify! 

• barrel shroud ported for upper barrel vents which counteract muzzle flip and 

aid with shot follow-through - shroud accepts sliding counterweights 

• new stabilising system ensures no recoil and best accuracy from shot to shot 

• larger load lever and dry-fire mechanism 

• adjustable right-hand walnut grips in sizes: XS, S, M, L + XL - or left-hand: S, M + L 

• adjustable rearsight and interchangeable foresights (extra) 

• cased with charging adaptor, tools and VFG cleaning felts, etc. 

S.750 Steyr LP.10 - Black 

• as S.750-S, but black frame with two cylinders in colour choices as above 

S.750E-S LP.10-E - Electronic - Silver 

• one of the world`s best air pistols is now available with electronic trigger! 

• dry-fire mechanism and constant pressure release 

• twin 1,5V AAA standard batteries give 30,000 shots 

• multifunctional grip adjustment can be retained by the 

flexible electronic system 

• otherwise as S.750-S above 

• supplied with two cylinders - colour options: silver, blue or gold 

in a rigid case with charging adaptor, tools, etc. 

S.750E Steyr LP.10-E - Electronic - Black 

• as S.750E-S above, but black frame 

S.730 Steyr LP.50 5-shot rapid-fire 

• two cylinders with end gauge in silver, blue or gold - please specify! 

• improved magazine traverse 

• redesigned trigger 

• ported barrel reduces muzzle flip and improves follow-through 

• barrel shroud carries 10 grm counterweights along its length 

• grip options as S.750-S above 

• cased with charging adaptor, tools, etc. 

S.730E Steyr LP.50-e - Electronic 

• the well known 5-shot pistol is now also available with the new, 

superb electronic trigger system 

• two cylinders with end gauge in silver, blue or gold - specify! 

• barrel shroud accepts counter weights and is ported to 

reduce flip when fired 


page 74 

other models available upon request

steyr 

S.729 Steyr LG.110 - Match 

• available with one-piece or take-down stock - specify! 

silver alloy stock with fore-end rail for accessories 

• it introduces the unique Steyr stabilizer system which 

eliminates recoil to zero 

• adjustable butt, grip and cheek-piece 

• sleeve barrel weights can be moved to suit 

• silver cylinder with end gauge - blue available - specify! 

• detachable fully adjustable fore-end support 

• grip options: right-hand small, medium and large - left medium 

• cased with sights using a 22mm foresight, tools, etc. 

S.720 Steyr LG.110 - Light 

• lighter overall match air rifle version of the above - 4.3kgs 

• for juniors, ladies or men prefering less weight 

• fore-end rail accepts all standard rail accessories 

• cylinder options as S.729 above 

• includes sights using a 22mm foresight 


S.717 Steyr LG.110 - High Power 

• silver alloy stock - silver cylinder with gauge - blue available 

• sidelever cocking action does not interfere with your riflescope 

• composite cut-out stock incorporating an ambidextrous pistol grip 

• quick-fit stock attachment makes disassembly simple 

• 7.5, 16, or 24 (F.A.C.) joule power outputs - specify! 

• also available with black alloy stock for cal. 5.0mm and 5.5mm 


S.760 Steyr LP.2 

• for entry-level shooters seeking an affordable price pistol 

• single cylinder with gauge in silver, blue or gold - specify! 

• grip options as S.750-S 


S.762 Steyr LP.2 - Compact 

• as above but shorter and lighter overall for ladies and juniors 

or those with weaker wrists having difficulty holding aim using 

a standard version 

• grip options as above or with lighter ambidextrous grip 

S.780 air pistol kit 

• a complete kit suitable for all Steyr air pistols - old or new 

• consisting of an efficient muzzle compensator which 

eliminates barrel flip, a moveable barrel weight 

and two adjustable counterweight bars (alloy) with 

moveable weights for the perfect balance 

S.715 Steyr LG.110 - Field Target 

• silver alloy stock with adjustable butt, cheekpiece, fore-end and grip 

• user-friendly sidelever cocking action does not interfere with your 

riflescope or its mounts - grip and cylinder options as S.729 

• easily converted to a match rifle by the additional purchase of the 

correct muzzle tube and target sight set 

• 7.5, 16 or 24 (F.A.C.) joule power outputs - please specify! 


page 75

feinwerkbau 

F.610 Feinwerkbau 700-ALU 

• the latest alloy air rifle from Feinwerkbau is in matt black and silver and has a standard for-end rail 

• it introduces a new moveable sight base rail at front and rear for precise location of sight height 

• the fore-end support rotates to assist cant - includes sights using a M.22 foresight 

• the load gate lever is now stepped away for 'scoping if required 

• comes with the latest interior absorbing device for no impulse 

• grip position is fully adjustable as are all stock settings 

• also available colour options: blue/silver or red/silver 

F.622 700-ALU Evolution - 

ventilated alloy Stock 

• a design concept introduced to meet customer 

demand for a match air rifle with more personal and 

individual appeal 

• this range offers a choice of two colour designs 

matched on the air cylinder, pistol grip, cheekpiece 

and rearsight side panel 

• lighter overall rifle version of the above (only 3.6kgs) 

• equipped with the latest absorber system 

• colours available: blue and bright red 

F.601 700 Universal 

• a less expensive laminated wood version with the 

successfull technical design of the 700 series 

• single cylinder with end gauge 

• includes sights using a M.22 foresight 

• available right-hand or as a true left-hand rifle 

F.604 700 Basic 

• ambidextrous beech stock with right-hand action 

• an economical way to begin top-level match shooting 

• detachable cylinder with gauge and charging adaptor 

• equipped with the brilliant inner absorber system 


F.608 500 

• ambidextrous beech stock with right-hand action 

• this model combines easy handling with proved 

Feinwerkbau quality and precision at a 

favourable price 

• detachable cylinder with gauge 


page 76

feinwerkbau 

F.640 Feinwerkbau 2700 super match - 22mm diam. barrel 

F.642 Feinwerkbau 2700 Super Match - 24mm diam. barrel 

• both models are available with either a blue alloy stock and a matching blue grip or a silver alloy stock with 

contrasting black grip and cheek-piece 

• supplied with a fully adjustable fore-end block - fore-end rail accepts all standard rail accessories 

• grip, butt, hook and cheekpiece adjustable 

• handstop combined sling swivel 


• available as a true left-hand rifle 

F.695 2700 Super match - light 

• also available as a LIGHT version with a reduced overall 

weight of only 5.1kgs - 22mm diameter barrel only 

F.646 2700 Universal 

• with 22mm or 24mm diameter barrel - please specify! 

• laminated stock 


• butt and cheekpiece adjustable 

• with handstop combined swivel 

• includes sights 

• available as a true left-hand - please enquire 

F.655 Feinwerkbau P.44 

• the latest match air pistol with easier cocking and redesigned action body 

incorporating a sliding and canting rearsight and a fully adjustable trigger 

• rake-adjustable anatomical grip available in three sizes, right- or left-hand 

• cased - over-barrel counterweight mount available extra 

F.660 Feinwerkbau P.44-Short 

• also available as a SHORT version - 870grms only 

F.665 Feinwerkbau P58 5-shot rapid-fire 

• yet another improved version of their rapid-fire match air pistol with an 

improved action 

• rake-adjustable Morini grip available in three sizes, right- or left-hand 

• trigger can be rotated and swivelled and is adjustable in length and height 

• with a 5-shot, single-shot and dry-fire practice magazine - cased 

F.630 Feinwerkbau AW.93 .22lr 

standard pistol 

• classic standard pistol in nickel finish 

• right- and left-hand grips in small or large 

• barrel 152mm, overall length 285mm, weight 1140grms 

• supplied in rigid carry case 

• also available as a LIGHT version (locking piece made out of aluminium) 

other models available upon request 

page 77

walther 

W.1246 Walther LP.300-XT 

• with redesigned cocking action, new absorber system "XT", compensator 

and three large gas ports in the barrel for a minimised barrel flip 

• ProTouch 3-D anatomical grip in three sizes for right-hand shooter 

available with left-hand grip in medium only 

• 300-bar cylinder with 200- and 300-bar charging adaptors - cased 

W.1249 Walther LP.300-XT 5D 

• as above but with the latest ProTouch 5D anatomical grip which offers 

the following advantages: 

- adjustable also in the width for enhanced volume 

- the small alloy plate allows an individually setting by fine adjustment 

of three different positioned screws 

• available in medium size for right-hand shooter only 

W.1241 LP300 Ultra 

• reduced in overall weight for juniors or ladies - 850grms 

• 300-bar shorter cylinder without gauge but with 200- and 300-bar 

charging adaptors 

• 3-D anatomical grip in two sizes for right-hand shooter 

• cased 

page 78 

W.1341 Walther LG.300-XT anatomic 

• the stock is made from a single piece of laminated wood, offering the adjustment options of 

an aluminium stock - rake-adjustable (fully adjustable in all directions) 3D-grip 

• 300-bar cylinder and gauge with both 200- and 300-bar charging adaptors 

• adjustable alloy butt plate and sight elevation 

• available right-hand or as a true left-hand rifle - with sights - cased 

W.1331 walther LG.300-XT Alutec 

• attractive blue alloy stock with a wide range of settings 

• fully adjustable 3D-grip 

• comes with the latest "XT" anti-vibration system, including 

the new absorber and a modified pressure reducer 

• 300-bar cylinder with 200- + 300-bar charging adaptors 

• includes sights - cased 

W.1343 LG.300-XT ALUTEC Protouch 

• alloy stock with non-slip areas and rake-adjustable black grip 

• equipped with MEC Contact III butt assembly, adjustable 

fore-end and cheek piece, high sight base set, a stylish 

carbon fibre barrel jacket and new "XT" absorber system 

• 300-bar cylinder and gauge with both 200- and 300-bar 

charging adaptors 

• with sights - cased 

W.1370 LG.30 Vision concept... 

• alloy fore-end with five artistic colour design options 


• ambidextrous cheek piece but reversible grip 

• 300-bar cylinder with 200- and 300-bar charging 

adaptors - cylinder with gauge - includes sights 

W.1370 Vision Universal: ambidextrous alloy stock and 

basic target rearsight 

W.1371 Vision Plus: ambidextrous alloy stock and 

standard target rearsight 

W.1375 Vision Junior: shorter ambidextrous stock and 

basic rearsight

walther 

W.1280 Walther KK.300 Anatomic 

• blue laminated wood stock, blue grip, blue cheek-piece, etc. 

• MEC Free Position butt and handstop with sling swivel 


• anatomically adjustable throughout 

• includes sights 

• also available left-hand (right-hand rearsight) and as a LIGHT version with 

a reduced overall weight of 5.9kgs 

• cased to carry rifle with sights fitted 

W.1289 Walther KK.300 Alutec 

• blue alloy stock with laminated grip, cheek-piece and fore-end, etc. 

• new completely revised trigger - weight adjustment from 50 - 130grms 

• includes sights, MEC Free Position butt and handstop with sling swivel 

• excellent value for money and suits beginners or clubs 

• available left-hand (right-hand rearsight) 

• in rigid case large enough to allow sights fitted 

W.1200 GSP Expert .22lr standard pistol 

• continuing a long family of standard pistols 

• distinctive weight forward design to set the wrist 

• 1000grms match two-stage trigger 

• trigger can be changed for the 1360grm version 

• rearsight position over the wrist for accuracy 

• moveable barrel weights (2x17grms) compensate recoil 

• three right-hand grips but left-hand medium only 

• cased with spare magazin, etc. 

W.1206 GSP Expert .32 S&W long 

• as above, however a .32 S & W long centre-fire version 

• cased with spare magazin, etc. 

W.1216 + W.1218 GSP Conversion kits 

• for all shooters wishing to have one gun, but two calibers - easy to change 

W.1216 conversion kit in caliber .22lr 

W.1218 conversion kit in caliber .32 S & W long 

W.1251 SSP .22lr standard pistol 

• all new design with improved balance 

• weight-forward style to set wrist 

• a pneumatic damping system provides a smooth release of the shot 

• 1000grm or 1360grm trigger options 

• three right-hand 3-D anatomical grips but left-hand medium only 

• cased with spare magazine, etc. 


page 79 

79

anschütz 

A.1462 Anschütz 2013/690 with stock 2013 ALU 

• with heavier 690mm barrel and a four bolt tie-down stainless receiver 

• perfectly styled alloy stock with fully adjustable butt plate, cheek-piece and rail for handstop etc. 

• comes with handstop, fore-end raiser block, screw driver etc - sights extra 

• a true left-hand version is available and left-hand sights are extra 

A.1464 Anschütz 2013/690 with stock 2018 ALU Precise 

• as above, but this new alloy stock rifle has a slimmer and more rounded fore-end suitable for a wider range of shooters 

• ventilation holes promote a more stable barrel temperature through the course of fire 

• dynamic and harmonic research produced a wedge-shaped recoil damping system which has produced greatly 

improved vibration levels with the result that there is a vast improvement in increase in bullet group consistency 

• the cheek-piece profile has been changed and its method of adjustment and clamping improved with much 

larger knobs - eliminating the need for tools - cased - excludes sights 

A.1414 1907 with stock 

1918 alu precise 

• one of the favorite small bore rifles because of its fine 

adjustable match-trigger in combination with the extreme 

short locktime 

• new alloy stock with ventilation holes to promote a more 

stable barrel temperature 

• fully adjustable grip, cheek-piece and butt plate 


• cased with handstop, fore-end raiser, etc. - sights extra 

A.1407 1913 with Stock 2213 Alu 

• 690mm barrel and action combined with an alloy stock 2213 

giving all possible anatomical adjustments 

• grip, butt, cheek-piece and fore-end adjustments 


• delivered with handstop, fore-end raiser block, etc. 

• available left-hand - sights extra 

A.1455 8002 S2 silver alloy stock 

and black grip, etc 

• alloy stock with grip, butt, cheek-piece and fore-end adjustments 


• new trigger mechanism 

• cylindrical match barrel for best shooting performance 

• detachable cylinder with gauge for 250+ shots 

• with charging adaptor, tools etc. 

• includes 6834 sight set 

• available left-hand and also available in a sliver stock with 

laminated blue grip 

A.1421 & A.1423 8001 club & Junior 

• multi-colour Junior and plain walnut Club models 


• adjustable butt and cheek-piece 

• detachable cylinder with gauge (long - Club) & (short - Junior) 

• excellent beginners rifle for smaller shooters or clubs 

• includes 6834 sight set 


page 80

edge + hämmerli 

E.100 EDGE Airgun 

• give yourself the EDGE with this new entry level target rifle 

• this lightweight pre-charged target rifle has the look and feel of a top range expensive precision 

match air rifle but at a realistically, affordable price for clubs or the first time target shooter 

• ambidextrous stock with pistol grip and ambidextrous cocking knob ensures an easy handling for 

both right- and left-hand shooter - adjustable length of pull let the rifle easy grow if needed 

• the unique features include an adjustable cheek piece and fore-end for better fit, 

a match grade barrel (Lothar Walther) for best precision, etc. 

• recoil free Gunpower pre-charged system with a secure dry-fire mechanism if wanted 


• E.100 blue anodised alloy stock 

• E.100-R red anodised alloy stock 


E.100 EDGE Airgun 

calibre 4.5 mm / .177 

length 

91 - 106cms 

barrel 

Lothar Walther 

velocity 

165-175 meters per second 

weight 

3.000 grms 

number of shots per fill 100 

length of pull adjustment 15 cms 

trigger 

0.68 kg / mechanic 

H.1040 Hämmerli AP.40 Balance 

• low-vibration compressed-air system 

• ported barrel to prevent barrel flip 

• ambidextrous loading 

• grip and trigger adjustable in all three axes settings 

• front sight in three widths 

• dry-fire trigger 

• aluminium cylinder with gauge 

• cased with filler and tool 

• Junior version - H.1042 

SP20 RRS H.1051 in .22lr 

h.1053 in .32 S&W Long 

• a new action with improved balance 

• receiver with adjustable buffer system 

• improved recoil damping for better follow-through 

• calibre conversion kits available 

• three right-hand grips, but medium left only 

H.1061 X-ESSE .22 lr. sport pistol 

• barrel length 150mm 

• all steel construction 

• 10-shot magazine 

• 11mm top rail for pistol `scope 

• cased with cleaning kit and second magazine 

• available as H.1060.LS X-esse long - 150mm barrel 

• available as H.1060 X-esse short - 115mm barrel 


page 81

fx airguns 

FX.1000 Typhoon 

• a lightweight single-shot rifle with only a 

few moving parts that settles for many years 

of trouble free shooting 

• in either synthetic for right-hand (FX.1000) or 

walnut ambidextrous stock (FX.1002) for 


• bolt action with safety - recoil free 

cocking system 

magazine type 

stock 

calibre 

barrel 

weight 

bolt action 

single shot - no magazine 

1. synthetic or 

2. walnut - ambidextrous with adjustable recoil rubber pad 

5.5mm / .22 or 

4.5mm / .177 

match grade (Lothar Walther) choked, free floating, 

length: 500mm 

synthetic stock: 2.2kgs 

walnut stock: 2.7kgs 

power settings: 7.5 - 36 joules 

FX.1012 T12 

• based on the single-shot Typhoon action 

but modified so you can fit the new 12-shot 

magazine found on the Revolution 

• available in synthetic right-hand (FX.1012) or 

walnut ambidextrous stock (FX.1212) for 


• bolt action - recoil free 


magazine type 

stock 

calibre 

barrel 

weight 

page 82 

bolt action 

12-shot - cal. 5.5mm / .22 - removable 


1. synthetic or 

2. walnut - ambidextrous with adjustable recoil pad 

5.5mm / .22 or 

4.5mm / .177 


length: 500mm 




above rifles sold with filling probe and user manual - excluding riflescope

fx airguns 

FX.3700 t12 whisper 

• based on the T12 with new 12-shot magazine, 

but offering a highly restrained noise level 

• available in synthetic thumb-hole (FX.3700) or 

walnut thumb-hole stock (FX.3702) 

• bolt action - recoil free 


magazine type 

stock 

calibre 

barrel 

weight 

bolt action 



1. synthetic - thumb-hole with adjustable recoil pad or 

2. walnut - thumb-hole with adjustable recoil pad 

5.5mm / .22 or 

4.5mm / .177 

match grade (Lothar Walther) choked, 

length: 500mm 




FX.5100 Cyclone 

• this rifle has a straight pull cocking system 

with the possibility to use the thumb for the 

return of the cocking lever 

• ambidextrous (left / right) stocks available 

in synthetic (FX.5100) or walnut (FX.5102) 

also offered in a thumb-hole walnut version 

(FX.5104) 

• the synthetic stock has built in soft, special 

rubber material for best grip 

• patented power adjuster that gives the rifle 

three different velocity settings 

• recoil free 


magazine type 

stock 

calibre 

barrel 

weight 

straight pull with thumb return 

8-shot magazine - removable 

1. synthetic - ambidextrous (left / right) with tactile inserts in 

the grip and rubber recoil pad 

2. walnut - ambidextrous with rubber recoil pad 


5.5mm / .22 or 

4.5mm / .177 

match grade (Lothar Walther) choked, free floating 

length: 500mm 




all rifles sold with filling probe, extra magazine and user manual - excluding riflescope 

page 83

fx airguns 

FX.6000 Cutlas 

• this rifle is equipped with a military style 

straight pull cocking system with auto return 

• thumb-hole stocks available in 

synthetic (FX.6000) or walnut (FX.6002) 

• the synthetic stock is designed for attachment 

of a bipod or lamp on a Waever-style rail and 

has a passage behind the trigger for up to 

three magazines 

• patented power adjuster gives the rifle 

three different velocity settings 



magazine type 

stock 

calibre 

barrel 

weight 

straight pull with sprung return 


1. synthetic - thumb-hole stock with adjustable recoil pad, 

for-end accessory rail - magazine holder or 

2. walnut - thumb-hole stock with high adjustable recoil pad 

5.5mm / .22 or 

4.5mm / .177 


length: 500mm 





magazine type 

stock 

calibre 

barrel 

weight 


8-shot magazine- removable 

synthetic - ambidextrous with adjustable recoil pad 

5.5mm / .22 or 

4.5mm / .177 


length: 500mm 

3.2kgs 


FX.7000 Gladiator 

• this rifle holds an enormous amount of air ! 

the butt combined air cylinder is removable to 

make a neat package 

• it also has the straight pull cocking system of 

the Cutlas above 

• synthetic stock with finger-grooved pistol grip, 

adjustable air cylinder cover combined 

cheek piece 


three different velocity settings - recoil free 

page 84 

all rifles sold with filling probe, extra magazine and user manual - excluding riflescope

fx airguns 

FX.8000-22 Revolution 


magazine type 

stock 

semi automatic 

calibre 5.5mm / .22 

barrel 

weight 


synthetic - ambidextrous with adjustable rubber recoil pad 


length: 500mm 

3.6kgs 

power setting: 40 joules 

• this model takes air rifles to a new level 

with its rapid-fire semi-automatic system, 

exhausted air is used to cycle the bolt and 

index the magazine 

• the 12-shot magazine gives a greater number 

of shots while the time between each is 

minimal 

• the exceptionally quiet action makes it ideal 

for hunting and use in the field whilst the 

manual bolt allows safe loading without the 

risk of misfire 

• on the right side is a cleverly designed safety 

that prevents the semi-automatic rifle from 

firing 

• ambidextrous synthetic stock with combination 

adjustable butt stock and air cylinder 


FX.3500 Monsoon 

• this rifle gives rapid-fire action with 

single-shot precision 

• it has an extremely quiet semi-automatic 

system similar to the Revolution which uses 

wasted air to cycle the bolt and index of the 

12- or 16-shot magazines 

• the manual bolt lever enables the rifle to be 

loaded safely without risk of a misfire 

• thumb-hole stocks with adjustable recoil pad 

are available in 

synthetic (FX.3500) or 

walnut (FX.3502) 



magazine type 

stock 

calibre 

barrel 

weight 

semi automatic 



1. synthetic - thumb-hole with adjustable recoil pad or 


5.5mm / .22 or 

4.5mm / .177 


length: 500mm 



power settings: 27 - 35 joules 

all rifles sold with filling probe, extra magazine and user manual - excluding riflescope 

page 85

fx airguns 

FX.7500 Verminator 

• the Gladiator on a diet ! 

• delivered in a compact hard-case - all you do is 

attach the cylinder combined butt assembly and 

you are shooting ! 

• synthetic pistol-grip stock 

• muzzle flip (FX.905) mounted as standard 


three different velocity settings - recoil free 


magazine type 

stock 

calibre 

barrel 

weight 



synthetic - ambidextrous with adjustable recoil pad 

5.5mm / .22 or 

4.5mm / .177 


length: 210mm 

2.4kgs 


FX.6400 royal 400 

• one of the latest creations with a robust 

mechanism and a new smooth operating 

side lever cocking system 

• thumb-hole stocks with adjustable recoil pad 

are available in 

synthetic (FX.6401) or 

walnut (FX.6400) 

• this model comes with a 400cc big cylinder 

and a barrel sleeve working like a silencer 



magazine type 

stock 

calibre 

barrel 

weight 

side lever 



1. synthetic - thumb-hole stock with adjustable recoil pad or 

2. walnut - thumb-hole stock with high adjustable recoil pad 

5.5mm / .22 or 

4.5mm / .177 


length: 500mm 




FX.939 Plastic rifle case 

• stable design with foam lined internally and enough space 

for mounted scope 

• contoured recessed latches - padlock tabs for added security 

• inner dimension: 121x27x7 cms (47.6" x 10.6" x 2.8") 

page 86 

all rifles sold with filling probe, extra magazine and user manual - excluding riflescope

fx airguns 

FX.8500 Ranchero 

• our first pistol, based on the well-known Cyclone action with a comfortable right-hand chequered walnut pistol grip 

• straight-pull cocking system on the left - recoil-less 


magazine type 

stock 

calibre 

barrel 

weight 

straight pull with thumb return 

8-shot magazine- removable 

walnut - right-hand grip only 

5.5mm / .22 or 

4.5mm / .177 


length: 210mm 

1.45kgs 


FX.450 

• 33mm attachment kit for slings, bi-pods etc. 

easy to mount on all FX cylinders 

FX.400 

• flexi-hose kit with manometer to suit perfect 

all FX weapons, including particle filter and 

pressure release screw 

FX.900-22 

• spare magazine, 8-shot, cal. 5.5mm / .22 

FX.900 


FX.910-12 


FX.910-16 


FX.490 

• rifle scope 3-12 x 44, crosshair with 

red illuminated center point (12 stages) 

• multi-coated lenses 

FX.491 

• scope mounts 

for FX scope 

above (Ø 1 inch) 

• available in 

three different sizes: 

low, medium and high 

FX.930 

• barrel support for all 

FX standard barrels (Ø 14mm) 

FX.905 

• muzzle flip 

FX.940 

• added to existing FX cylinders 

this tube extension gives 

45cc / 100mm more volume 

FX920-45 spare cylinder 45cc / 100mm 





FX920-400 rear spare cylinder 400cc 

FX920-500 rear spare cylinder 500cc 

page 87

weihrauch 

We introduce the remarkable family of HW Weihrauch products 

which enjoy world-wide sales based upon their quality of build, fantastic service life without need of repair and an enviable reputation for 

smooth controlled power once released by the standard production `Record` trigger - a box unit retained within the rear housing by two 

crosspins - with a delightful two-stage let off and an adjustable trigger pressure spring easily altered through a hole in the trigger guard. 

The mechanism, once cocked, activates a lateral safety catch which pops out of the top left side of the housing above the trigger and can be 

instantly pressed in and released for firing by simply swivelling the thum. Riflescopes of all types can be fitted and the rear of the rail has three 

recessed stop holes for a recoil arrest plug to sit in through the rear of your `scope mount. 

Various powers are available for different markets around the world but 7.5 joules is for countries with low limits, 16.3 joules for standard 

countries and 30 joules for countries where no limit applies. 

.22 (5.5mm) is standard for export but .177 (4.5mm) options are available - .20 (5.00mm) and .25 (6.30mm) barrels can be special ordered on 

a few models - please enquire. Left-hand stock options are also available but at a surcharge - please enquire. A micrometer target rearsight is 

available to fit the whole family of rifles - please enquire. 

HW.100S + SK 

• pre-charged sporting rifle, walnut stock, 

carbine barrel, moderator 

• cylinder with gauge 

• available in caliber .22 or .177 and also 

in a shorter carabine-version (HW.100SK) 

• excellent accuracy - recoil free 

HW.100T + TK 

• .22 thumb-hole stock version 

• as above .177 (4.5mm) 

• also available in the short and compact 

carabine-version (HW.100TK) 

HW.97K + KT 

• under-lever carbine 

• standard version with a beech stock 

• also available with blue/grey 

laminated or thumb-hole stock 

HW.80 

• break-barrel with highest power 

• beautifully shaped beech stock 

HW.35 

• break-barrel with barrel latch 

• beech stock with walnut finish 

HW.45 

• pistol with full length `scope rail 

• ambidextrous grip 

HW.30 

• .22 lightweight family fun gun 

• as above .177 (4.5mm) 

page 88 

all rifles sold without scope

diana + hometrainer 

D.1354 54 Air King 

• a side-lever loading recoil-less rifle 

• available in calibres .177, .22 and .25 

• smooth precision trigger with adjustable pressure let-off, adjustable rear- and foresight 

• fine quality wood stock 

• main cylinder with base rail for mounting riflescopes 

D.13350 350 Magnum 

• for those wanting a simpler and less-expensive wood stock 

rifle this is the answer - available in calibres .177 or .22. 

• match type trigger and adjustable rear- and foresight 

• main cylinder base rail for mounting riflescopes 

D.1321 Panther 21 

• black synthetic stock with tactile fore-end and 

pistol grip stippling give this rifle a more modern appeal 

• ideal for family fun or small vermin control 

• available in calibre .177 only 

• adjustable rearsight and foresight 

• main cylinder base rail for mounting riflescopes 

D.1331 Panther 31 

• big brother to the model 21 above with increased power 

• available in calibres .177 and .22 

D.1308 P8 Magnum 

• a smooth operating pistol suited for 

accurate target shooting or 

simply fun in the garden 

• attractive black stippled stock 

• available in calibre .177 only 

164 SCATT USB Professional 

10m trainer 

• for rifle and pistol with or without ammunition 

• includes weapon sensor, target holder and software 

• precise analysis for exact and averaging information 

• uses infra-red sensors for highest precision 

• can be displayed on screen 

• options include trigger sensor and adaptations 

for 25 m pistol and 50 m pistol and rifle 

163 SAM Home Trainer 

• for rifles and pistols with computer link capability 

• with target holder, weapon sensor and USB connection 

• multi-weapon attachment for distances up to 10 metres 

• both receiver and target unit are now battery operated and 

remote controlled - no need of cables ! 

• no need for special targets - uses standard 10 metre cards 

• connected to your own PC it gives analysis of technique and 

score, ready for printing 

• optional trigger sensor available 

R.134 LTS System 

• a non-firing junior training system with mock rifle and electronic sensing target to 

encourage and analyse shooting technique amongst youngsters and trainees 

• without sights 

• weighs only 2kgs ! 

page 89

morini recharging equipment 

M220 200-bar pump 

• now even easier priming with a system useable by children 

• easily detachable rigid footplate 

• inclusion of a pressure gauge 

• includes a particle filter and condensation bleed valve at base 

• DIN standard 5-thread connector 

• 210cu cms volume of air per stroke 

M100 4-STAGE TURBO-PUMP 

• the new generation of high-pressure-pumps - patented 

• our already well-functioning and reliable M220 pump 

has been revised and improved by the new 4-stage system 

• very robust and stable construction 

• begin pumping with 4-stage technique to reach around 150 bar 

and then you can gear down to 3-stage and proceed pumping 

with ease to fill your cartridge to wanted pressure 

• stage switch is located between the handles 

• 4-stage = 280cu cms 

• 3-stage = 200cu cms 

• includes a particle filter, pressure gauge, 

DIN standard 5-thread connector and 

condensation bleed valve at base 

M225 DIN connector 

• for use in DIN standard 200-bar applications 

with five threads 

• also only accepts 5-thread DIN adaptors 

supplied with all weapons: 

includes manometer and 

bleed air allen screw 

M208 flexi-hose kit 

• hose kit with DIN standard 5-thread 

connector for our bottles, 

compressors or pump coupled to a 

standard 1/8“ female connector 

• this accepts quick-fill probes used by 

some manufacturers or will couple to 

other hoses or units 

ALL BOTTLES FOR 200-BAR USE (TESTED TO 300-BAR) 

EXCEPT M229 WHICH IS 300-BAR (TESTED TO 450-BAR) 

M224 

• 4 ltr without gauge 

M221 

• 4 ltr with gauge 

M222 


M223 


M228 


M229 


M224 M221 M222 M223 M228 

page 90 

M229

echarging equipment morini 

B300 Bauer S30 compressor 

• a lightweight (37 kgs) mobile compressor for 200- or 300-bar 

(specify when ordering) 

• 300-bar compressor version and B305 multi-fill switch panel 

is needed for charging 200- and 300-bar cylinders 

• a long hose with large manometer carries a smoothly operating 

regulator valve enabling absolute accuracy of charging pressure 

• fast charging - a match air rifle cylinder can be recharged from 

50 to 200-bar in 60 seconds! 

• suitable for large bottle refills 

• exceptional high-quality air filtration system 

• a clear front panel illustrates the method of use and the 

owners handbook is very comprehensively written for maximum 

operator safety 

• 110 V / 60 Hz option available 

technical specification 

• 230 V /50 Hz 

• weight: 37kgs 

• height: 34cms 

• width: 33cms 

• depth: 60cms 

• filling power: 30 l/min 

B305 multi-fill switch panel 

• for charging of 200- and 300-bar cylinders 

• easy connected with all Bauer compressors 

B400 Bauer Junior II compressor 

• a compact mobile compressor suitable for all situations 

• works on 230 V and provides the 300 or 200-bar charging 

(please specify when ordering) 

• 300-bar compressor version and B305 multi-fill switch panel 

is needed for charging 200- and 300-bar cylinders 

• can be used quite satisfactorily for refilling large bottles 

• with safety system relief valve 

• filtration system provides breathing air quality eliminating 

worry of long-term internal damage to expensive air weapons 

• total weight 46 kgs 

• supported worldwide by Bauer’s and Gehmann’s distributors 


technical specification 

• 230 V / 50 Hz 

• weight: 46kgs 

• height: 42cms 

• width: 39cms 

• depth: 66cms 

• filling power: 100 l/min 

M203 compressor to bottle hose kit 

• for use when charging master refill bottles direct from compressors 

• flexi hose with 200 bar DIN connectors at both sides 

page 91

morini customising 

840-III Gehmann Contact-III alloy butt 

• a lightweight but universally adjustable alloy butt plate assembly 

• can be retro-fitted to nearly all current production and some older 

match air rifles 

• can be raised or lowered and contoured to the shoulder profile 

• can be laterally adjusted on the central pivot block 

for right- or left-hand shooter or to step the rifle nearer to 

or further from the face 


700-III MEC Contact-III 

• as 840-III but all silver 

843 Gehmann alloy butt 

• an inexpensive blue alloy butt plate assembly 

• adjustable for height and radius on the base 

• top and bottom legs can be positioned for angle and length 

over the shoulder depth 

• suitable for fitting to all rifles with standard attachment bolts 

• for right- or left-hand shooter 


843R as 843 but red 


• an inexpensive black rubber butt pad which can 

be moved vertically on its black alloy base which 

carries settings 

809 Gehmann butt hook unit 

• fully adjustable (also for angle) butt / hook assembly 

• includes a hook set and ‘Top-Grip‘ rubber surface 

• stable alloy / steel combination 

• laser engraved settings 

709 MEC butt hook unit 

• fully adjustable butt / hook assembly 

• combines 700-III with a steel hook set 

• laser engraved settings 

page 92

customising morini 

840 ALLOY HANDSTOP 

• multi adjustable in all directions 

• pivots for vertical angle, left and right position 

and distance from base rail 

• removable spacer provides two widths for the 

thickness of your hand 

• detachable press-button swivel stepped from 

the body for greater comfort 

• fits all standard rails 

• weight only 135grms 

• silver finish with a special non-slip surface 

• in a solid alloy carry case 

• Gehmann quality “Made in Germany” 

845B 

blue alloy 

width-adjustable 

handstop 

• unique split centre clamping design permits 

profiling to the individual’s preference 

• attractively blue anodised 

• ball-fitting detachable sling swivel 

845 

• as 845B but red 

845S 

• as 845B but silver 

846 MEC handstop 

and swivel 

• alloy handstop with tactile 

circumferential rings 

• detachable press-button swivel 

stepped away from the handstop 

for comfort 

707 handstop 

• 1” diameter with tactile ring and milled edge 

• includes button release swivel 

• locks to the fore-end rail by screwing upward 

page 93


+ 

= 

708-Uni Gehmann bi-pod 

• retractable legs 

• nylon liner on rail clamp protects rail 

from marks 

• strong steel and alloy construction 

708-Stop handstop 

• a handstop and swivel to suit our 

708-Uni 

• snap-in sling swivel 

708 bi-popod rifle rest 

• inexpensive and easy to use 

• keeps your rifle upright 

• strong steel with large feet 

• fits standard rails 

• clamp screw also fits earlier Parker-Hale rails 

719 MEC trigger blade 

• precision machined alloy 

• rubber strips for fingertip sensitivity 

• adjustable in any axis 

• easy to lock in position 

• 719TA Anschütz 

• 719TF Feinwerkbau 

• 719TS Steyr 

• 719TW Walther 

841A barrel extension tube 

• anodised alloy with two moveable weights 

• matching sight-height rearsight base 

• foresight can be positioned over a longer radius 

• reduces noise at the muzzle 

• for Anschütz air rifles only 

717 Super-Gyro wrist 

exerciser 

• a dynamic ball requiring constant rhythmic 

gyrations to perpetuate the spinning - thus 

generating muscle tone and growth in the 

shooter’s wrists and forearms. 

• lightweight, for use anywhere, any time 

• equivalent torque of 15kgs and 10,000 r.p.m. 

• with quick-start pull-cord 

718-XB Gyro-Twister 

X-beam 

• as 717 but larger and heavier 

• a development of gyro wrist 

exercisers but also with a 

kaleidoscopic light effect 

• equivalent torque of 

17kgs and 14,000 r.p.m. 

704 MEC foresight extension 

for match air rifles 

• lightweight alloy tube 

• two steel weights can be moved along the tube 

• enables the sight position to be extended forward 

• matching height rearsight base 

• reduces noise at the muzzle 

• 704A Anschütz 

• 704 Feinwerkbau 

• 704S Steyr 

• 704W Walther 

page 94


848 adjustable high sight base set 

• infinite vertical lift from 6 to 15mm 

• finished in matt black alloy 


• precision engineered to fit Feinwerkbau rails 

• 848A for Anschütz 

• 848W for Walther 

849 multi-directional 

high sight base set 

• vertical lift from 6 to 15mm and 6 mm laterally 

• easy locking in position 

• matt black alloy 


• 849A for Anschütz 

• 849W for Walther 

844 multi-height bases 

• for all standard rails 

• offers five height capabilities (up to 28mm) - 4 with packing discs 

supplied (4 x 1mm, 4 x 2mm, 4 x 4mm, 4 x 8mm) 

• complete with different length allen screws to suit the chosen height 

• lateral shift: 5mm 

• attractive alloy and black combination 




847 alloy high sight base set 

• vertical lift 7.5 mm 

• spring-loaded clamps for quick grip 

• red anodised 

• 847S silver 

• 847B blue 

859A height adjustable & extendable `scope rail 

• heavy duty standard size rail clamps on base - 11mm top extension rail - lenght: 27.5cms 

• thread locking for extension rail to base 

• overall height lift 17mm - 3 x height settings overall rail length: 25 cms maximum outside clamping length: 18cms 

page 95


844 multi-height bases 

• for all standard rails 

• offers five height capabilities (up to 28mm) - 4 with packing discs 

supplied (4 x 1mm, 4 x 2mm, 4 x 4mm, 4 x 8mm) 

• complete with different length allen screws to suit the chosen height 

• lateral shift: 5mm 

• attractive alloy and black combination 


• spring-loaded, stable clamps 




844-RF extension rail for above 

• 152mm extension rail for 844 multi-height base set 

• replacement top-plate provides sight rail extension 

• preferred posisition can be individually chosen 

• height: 5mm 



• 844-RA Anschütz 

• 844-RW Walther 

858 universally adjustable 

wedge fore-end 

• fore-end with adjustable cant and height 

• silver alloy 

• suitable for nearly all different kind of stocks 

• fits for all standard fore-end rails 


• an inexpensive black rubberised alloy butt pad 

• can be moved vertically 

• carries settings 

842 rear base 

extension mount 

• rear extension for standard receiver rails 

• drops the rear sight-line height on rifles 

where this is not normally possible 

• calibrated rail 

• double clamping for security when fitting 

• matt black alloy 

• further extension can be achieved by using our 

anti-glare tubes 556-25, 556-35 + 556-50 

page 96


705 torque wrench 

• supplied with 4 bits: SW.2.5, SW.3, SW.4 + SW.5 mm 

• adjustable from 4 - 12 Nm 

• oxidation free and suitable for a lifetime’s use 

• 706 3/16 “ bit (extra) 

• 706.SC screwdriver bit (extra) 

866-N Gehmann bit set 

• rubberised tool with magnetic bit-holder in a rigid case 

• hexagonal bits: 1.5, 2.0, 2.5, 3.0, 4.0 + 5.0 

• Philips pattern: 1, 2 + 3 (cross slot bits) 

• Pozi-drive bits: 1, 2 + 3 (cross slot bits) 

• screwdriver bits: 4, 5.5 + 8 

288 senior‘s shooting 

rifle rest 

• designed for the new seniors‘ disciplines 

emanating from Germany 

• a vertical support device for 3-P rifle 

• adjustable height support bar with scale 

• strong, U-shaped base plate - can be 

permanently installed 

• length: 87cms 

• weight: 3.200grms 

page 97

morini spotting ‘scopes and stands 

297 universal `scope mount 

for 3-P rifle rests 

• can easily attached to different kind of tube diameters 

• nylon liner protects bar from marks 


• supplied with 276 universal ball and socket joint 

273 3-P rifle rest 

• for resting the rifle between shots 

• cartridge box can be positioned 

to suit you 

• solid tripod base 

now with improved clamps 

and a locking bar at the base 

• height adjusts from: 58 - 167cms 

• folded length: 55cms 


218 

295 packaway 3-P rest 

• a new screw-thread and sectionalised 

support tube for your rifle and 

cartridge box when shooting 3-P 

• solid tripod base ensures stability and 

your rifle‘s safety 

• compact when disassembled 

• in compartmentalised zip-up 

lightweight nylon bag with handle 

• hight adjusts from: 43 - 154cms 

• folded lenght: 40cms 


218 3-P rifle rest 

• our newest really heavy-duty rifle rest 

has fast-clamps at all main 

tube joint stations 

• the really solid base ensures stability 

and full equipment security 

• has a specially machined cartridge tray 

to accept our 869 bullet tray, 

two standard boxes of 50x rounds, 

a standard tin of match pellets or 

one of our 798 match pellet flippers 


• folded lenght: 55cms 


273 295 

page 98

spotting ‘scopes and stands morini 

296 universal mounting 

cartridge tray 

• can be fitted to all support tubes 

• allows cartridge box to be positioned as you want 

291 3-position rifle rest for 

table mount 

• includes cartridge tray holder and solid clamp 


234 flexi rifle support 

without base 

• length: 35cms 

235 flexi rifle support 

• for beginners, juniors and invalids 

• gives support of your rifle‘s fore-end on a pivoting mount 

• strong spring damping to rifle support bracket 

• vertical height adjustment to 78cms 

• solid base for great stability 

236 

238 

235 

Equipment for 235 

• 236: 30cms vertical extension rod 

• 237: spring tension test rods 

for competition control 

• 238: optional table mount: 

• provides an alternative form of 

mounting 

• can be screwed down direct to a table 

• allows for some height adjustment of 

the vertical rod 

237 

page 99

morini spotting ‘scopes and stands 

224 Gehmann 

20 - 60 x 60 

• black rubberised waterproof finish 

• metal end-caps for best protection 

230 Kowa TSN 661 

body only 

• an angled scope body for: 

239/ 20-60 20-60x eyepiece 

255, 256 + 263 Kowa 

TS 501 & TS 502 

248 20 x 33 

244 30 x 50 

• angled eyepiece 

• with mini-tripod and vertical post 

• cased 

240 Gehmann Àngled´ 


• 18-54 x 60mm zoom 

• including carry bag 

220 Gehmann `Special´ 


• 20-60 x 60mm zoom 

• includes table tripod with 

adjustable handle + head 

• carry bag 

248 244 

order code model magnification objective lens field at 1000 m length weight angled eyepiece suitable for 

240 Gehmann Àngled` 18 - 54 x 60 mm 27.5 - 16.2 m 310 mm 736 g X 10 - 100 m 

220 Gehmann `Special` 20 - 60 x 60 mm 26.2 - 15.2 m 350 mm 1100 g X 10 - 100 m 

224 Gehmann 20 - 60 x 60 mm 26.2 - 15.2 m 310 mm 940 g X 10 - 100 m 

244 DGJ 30 30 x 50 mm 22.8 - 17.0 m 250 mm 577 g X 10 - 100 m 

248 DGJ 20 20 x 33 mm 35.0 - 16.0 m 180 mm 262 g X 10 - 50 m 

255 + 256 Kowa TS 501 20, 20 - 40 x 50 mm 39.0 - 26.0 m 215 mm 380 g X 10 - 100 m 

263 Kowa TS 502 20 x 50 mm 39.0 - 26.0 m 235 mm 380 g - 10 - 100 m 

230 Kowa TSN 661 20 - 60 x 66 mm 33.2 - 17.5 m 311 mm 735 g X 10 - 300 m 

231 Kowa TSN 601 20 - 60 x 60 mm 33.2 - 17.5 m 299 mm 735 g X 10 - 300 m 

266 Kowa TSN 821 50, 20 - 60 x 82 mm 33.0 - 17.5 m 384 mm 1400 g X 10 - 300 m 

page 100

spotting ‘scopes and stands morini 

277 

279 

272 

272 tripod `scope stand 

• full height stand, adjustable tripod and vertical rod 

• supplied with 276 universal head 

• suitable for 3-P using our universal swivel arm 

• folded: 65cms (22.5“) 


274 alloy stand 

• lightweight brushed and anodised aluminium 

• adjustable rod (60cms extensions available) 

• supplied with 277K universal joint 

• fold-up legs for flat storage 

• suitable for all scopes and direct or indirect 

mounting of our 224 


278 extension for 274 

• 60cms 

279 broad tripod 

• wide extendable legs with internal bracing 

• extendable central column 

• adjustable scope bracket with handle 

• maximum extended length: 151cms 

• collapsed: 50cms 


276 ball and socket 

joint 

• universal joint gives chosen sight line 

• 1/4“ threaded base thread but this unit 

is supplied with a spare 3/8“ base 

278 

274 

270 

270 universal stand 

• suitable for range or field use 

• easily mounted using the grip clamp 

• with 276 ball and socket head 

• extendable rod gives an overall reach of 50 - 100 cms 

277K ball & socket joint 

• exceptionally strong 

universal joint with 

standard-thread 

spigot for securing 

`scopes and 

camera bases 

277 Cullmann tripod 

• robust, solid-based, all coupled 

to an exceptionally strong 

central column clamp 

• additional bracing on legs for 

greater stability 

• vertical rod can be extended 

to 180cms 

• supplied with 277K ball and socket 

mount - a quick-release plate is also 

available for prone 

• length folded: 31cms 


279 see page 98 

277 

page 101

morini equipment 

710 wood cartridge box 

• manufactured in finest beech 

• will last a lifetime, if looked after 

• precisely locates eight trays, 

each carrying 10 rounds 

• front exposed tray is locked in position by 

the lid once closed over the other rounds 

• supplied with shot marker-pins and 

mini-target for marking shots 

785 & 786 Gehmann match pellets 

• Gehmann H & N ‘Finale Match’ 

• tins of 500 - rifle or pistol 

• sizes 4.49mm or 4.50mm 

799 pellet tin cover 

• nylon sleeve, stops accidental spills of 

match pellet tins without a screw lid 

• possibly shooting’s cheapest aid ! 

For the full range of H & N pellets please consult our price list 

798 Gehmann pellet flipper 

• .177 match pellet flipper box 

• filled from 500 tin of pellets 

• lower tray is depressed, latched and the tray shaken - pellets drop nose down 

into 100 x holes in rows of ten ready for shooting 

• surplus pellets are shaken back into their tin via a cut-out in one corner 

• the lower tray latch is released and all pellets pop up in lines ready for use 

• foam-lined lid protects pellets once closed 

869 .22 cartridge box tray 

• a simple aid for separating five lines of five .22 rounds in a box of 50 

• the box is pressed in the tray and separate lines of bullets stand up 

ready for use - turn the tray over, repeat the process and the remainder 

stand up - simple and easy 

• for the following manufacturers: 

Federal, Fiocchi, Geco, Lapua, RWS, SK (not Eley) 

page 102 

1 2 

3 4

equipment morini 

760.... VFG cleaning 

• we offer the full VFG felt range for rodding and shoot-through 

• adaptors to suit VFG rods and others like Parker-Hale 

• for all calibres of weapons 

782 pull-through wicks 

• suitable for rifle or pistol and for all calibres 

• replacement wicks (784) available 

• very quick and easy to use 

• lightweight and easily transported 

900-22 Breach Plug with 

safety Flag - .22 

(1) 

• plug has two annular rings to give a snug fit and protect 

your breach against damage (1) 

• nylon cord eliminates damage should the mechanism 

be accidently closed (2) 

• visual indicator is very conspicuous red (3) 

• will not damage other equipment in your carry case 

(2) 

901-4.5 calibre .177 

902-32 calibre .32 

903-38 calibre .38, .357, 9mm 

904-44 calibre .44 

905-45 calibre .45 

906-308 calibre .308/7.62, 6.5 x 55, 7.5 x 55 & 57, 8 x 57 

907-12 calibre .12 gauge 

(3) 

711 shot counter 

• manually operated shot counter 

• prevents over-shot error 

715 handwarmer 

716 charcoal sticks 

• 12 x fuel-sticks for 715 

138 rim-thickness gauge 

• measures .22 lr rims 

• rounds are placed in a hole and the gauge moved until it stops 

• once gauged the round is placed with others of the same mark 

• once batched, rounds have identical head-space and therefore be held in the breach in a 

identical position prior to firing - immediately improving each batches` ballistic consistency 

• this critical process is necessary to improve scores by paying greater attention to the 

smallest detail - some times a simple rule even forgotten by the best 

page 103

morini ballistic test equipment 

142 illuminated 

scoring 

gauge 

• battery operated illumination 

• 10 x magnified screen with 

multi-calibre scoring rings 

730 

• as 142 without score screen 

132 - 136 scoring gauges 

• all conform to I.S.S.F. rules regarding plug diameter 

• magnification helps the scorer with judgement 

• outward scoring gauges available for air rifle and air pistol, inner ten for air pistol 

• spring handles avoid possibility of tearing shot holes 

magnified: 

• 132 for .177 / 4,5mm 

• 133 for .22 l. r. / 5,5mm 

• 133P32 for .32 

• 133P38 for .38 

• 133P45 for .45 

• 132NLG outward - for air rifle 

• 132NLP outward - for air pistol 

• 132LP-IT air pistol - inner 10 

without magnifier: 

• 135 for .177 / 4,5mm 

• 136-22 for .22 l. r. / 5,5mm 

• 136-32 for .32 

• 136-38 for .38 

• 136-45 for .45 

• 135NLG outward - for air rifle 

• 134NLP outward - for air pistole 

• 134LP-IT air pistole - inner 10 

140 boxed set of Gauges 

• a wooden box with foam-lined lid to store 

and protect all gauges without magnifier 

(134LP-IT excluded) 

139 boxed set of Gauges 

• as above, but it comes with all, 

magnified and non-magnified gauges 

(132LP-IT + 134NLP-IT not included) 

140 

139 

142 

156 Disag `RM IV´ target scoring system 

• for all targets: air rifle and air pistol, 50m small bore, running target, 

gallery rifle, 10m rapid-fire turning target 

• light weight, modern design 

• multi lingual display, user-friendly menu 

• for targets up to 20 x 20 cm 

• PC compatible, RS-232 port or USB 

• with automatic target printing of the scores 


158 DISAG `RM III Universal´ 

target scoring system 

• automatic system for air rifle and air pistol, gallery rifle, 

small-bore rifle and pistol, running target rifle (10 - 100 mtrs) 

and any full-bore weapon to a maximum target of 26 x 26 cms 

• a high quality item that is easy to handle 

• PC compatible and also other DISAG equipment 

• provides score and timed performance analysis for two-shot or 

rapid-fire shooting even using variable-time turning targets 

• with target printing of achieved scores 


page 104

allistic test equipment morini 

821 pistol and revolver adaptor Frame 

• this stable, rubberiesed adaptor frame allows easy handling and testing 

of all well-known handguns - designed to be used on 820 

820 Gehmann rifle test rig 

• for precision testing of rifles - a new design to 

improve stability 

• rifles, in stocks, are clamped at butt and fore-end, 

the clamps being soft to eliminate pressure points 

and wide enough apart to accomodate large fittings 

• fore and aft travel is along lower bushed rods with 

spiral springs to the rear to absorb recoil on calibres 

up to .243 Win. - big bore adaptor frame accomodate 

up to 8 x 57 - but available extra (828) 

• two transverse springs at the front give centralisation 

before and after testing 

• good enough to be used by 

ammunition- and weapon-firms, 

national teams, 

specialized 

dealers, etc. 

828 Big bore adaptor frame 

• two strong handels and six adjusting screws with rubber 

plates allows an easy testing of rifles up to 8 x 57 calibre 

• designed to be used on 820 

830 test rig for .22 lr. handguns 

• excellent quality at an affordable price 

• universal clamp suitable for air or live-round pistols 

• longitudinal carriage for precise shooting alignment 

• adjustable levels of recoil to suit all handguns 

• identical repositioning - shot after shot 

Gehmann proof-testing gauge 

• a gas pressure operated test gauge for ammunition 

service pressures and ballistic accuracy 

• an unique advantage of our machine is the ability to use 

both test systems: copper rods or quartz crystals (Piezo test) 

- at the same time if desired 

• supplied in four versions: 

1. rimfire pistol and revolver cartridges - bolt action 

2. rifle cartridges up to 15mm base diameter - bolt action 

3. cartridges up to 37mm base - bolt action or falling block 

4. cartridges up to 50mm diameter - falling block 

page 105


Gehmann trigger weight testers 

• high quality trigger weights manufactured in a stainless finish 

for precisely measuring at home, club or during a competition 

• conforms to I.S.S.F. regulations whether used with or without 

the rubber sleeve around the top of the suspension arm - when 

removed a knife-edge in the top bar gives precise location on 

the trigger blade 

• accuracy of each weight guaranteed to I.S.S.F. requirements 

• I.S.S.F. - rule: 8.4.2.4.2 

750-1500 

• for all weapons, long rod with 

1 x 500 grms weight plus: 1 x each 140, 360, 500 grms 

750-1360K 

• for pistols, short rod with 

1 x 500 grms weight plus 1 x each 360, 500 grms 

750-500 

• moving target rifle, long rod with 1 x 500 grms 

750-500K 

• for air pistol, short rod with 1 x 500 grms 

751 individual weights: 

• 751-140 140 grms 

• 751-360 360 grms 

• 751-500 500 grms 

735 1500 grms weight set 

• sprung-loaded short 500 grm bar supplied with 

1 x 140, 1 x 360 and 1 x extra 500 grm weight 

giving 1500 grms total weight 

trigger weight gauges 

• hand-held gauges with a black indicator which 

abuts a red drag indicator to show final reading 

• red drag indicator is easily reset 

890 range 25 - 250 grms 

891 range 50 - 500 grms 

892 range 200 - 2000 grms 

894 range 5 - 50 grms 

758 I.S.S.F. sizing box - for 

live round pistols 

• tests for I.S.S.F. overall size rules (8.1.6.0) 

• in metal with a clear perspex lid 

759 i.s.s.f. sizing box 

• as above -for air pistols 

• I.S.S.F. - rule: 8.1.6.0 

page 106

allistic test equipment morini 

168 Combro cb-625 MK.IV 

• compact chronograph and kinetic energy meter 

• easy to carry - battery operated 

• with USB 3-pin port, but without conector 

(can be purchased at every electronic shop) 

• specifically designed for airguns 

• excellent value for money 

168-N Combro cb-625 MK.V 

• as above, but translucent blue 

• includes angle adjustable support and 

steel pipe between sensors 

178 BMC 18 velocity gauge 

• high technology micro–controlers for greater precision 

• user-friendly infra-red remote control 

• USB port so an adapator is not needed for use with 

later model computers 

• software supplied turns your BMC 18 into a true 

ballistic laboratory 

• with use of the remote control the infra-red light barrier 

can be modified to suit each calibre 

• measuring range: 85 – 2000 m / s 

• acceptable calibers: 4.5 – 12.7 mm (.117 - .50) 

• precise to: < 1 % of LCD reading 

• other models 

on request 

(e.g. BMC 21) 

752-s 80N I.S.S.F. 

button position 

pressure gauge 

• measures correct button distance with ram pressure 

• provides exact distance from button to edge of jacket 

• given results are easily readable on a clear scale 

• I.S.S.F. - rule: 7.4.9.3.2 

737 I.S.S.F. jacket button 

position gauge 

• alloy plate to measure distance from button to 

edge of jacket 

• I.S.S.F. - rule: 7.4.9.3.2 

736 I.S.S.F. prone 

front arm-angle gauge 

• a plastic device for the prone discipline only 

• measures angle of fore-arm to the ground to check 

it is not too shallow, as per I.S.S.F. rules 

• I.S.S.F. - rule: 7.6.1.1 

page 107


755 clothing thickness gauge 

• manufactured in itself to I.S.S.F. regulations 

• measures thickness of materials to ensure no extra support 

is used to gain an advantage over fellow competitors 

• the machine is easily handled by any referee 

• three coloured scales are used on the gauge which measures 

from 0 - 20mm by 0.5mm increments 

• pressure is applied via two 30mm pads exerting 50 + 6 Nm 

• I.S.S.F. - rules: 7.4.9.3 and 7.4.9.4 

755-n clothing thickness gauge 

• measures thickness of materials to ensure no extra support 

is used to gain an advantage over fellow competitors 

• the machine is easily handled by any referee 

• the results appearing on a L.C.D. display 

• I.S.S.F. - rules: 7.4.9.3 and 7.4.9.4 

756 boot gauge 

• for measuring the sole length to height ratio and 

sole thickness in accordance with I.S.S.F. rules 

• a boot is inserted under the sole clamps and the end-stop 

adjusted for sole length, this automatically gives a vertical 

datum on a plexi-glass plate - at the same time a vertical 

test passes down in the boot to measure the sole thickness 

• manufactured in itself to I.S.S.F. standard 

• supplied in a carry case 

• I.S.S.F. - rule: 7.4.9.5 

757-N I.S.S.F. clothing rigidity gauge 

• manufactured for testing to the latest I.S.S.F. rules 

• applies pressure to a seamless area of material 

• an electronic sensor situated under the material emits if the material 

does not conform to the rules - the result appearing on a L.C.D. display 

• automatic reset to zero occurs after each reading 

• automatically switches off after a minute without use to conserve power 

• supplied with case which provides protection in transport 

• I.S.S.F. - rule: 7.4.9.2.2 

I.S.S.F. competition control equipment and accessories weight scales, dimensional diagrams, 

clothing gauges, windflags, lux meter, competitor numbers etc. 

available on request 

page 108

carry cases and rifle morini slips 

protect your investment 

Either hard or soft 

page 109

morini carry cases and rifle slips 

734 backpack 

• high quality dark blue rip-free nylon 

• full length two-way zip 

• external pouch for air cylinders or accessories 

• 130cms long with 8cms thick foam padding 

740 backpack 

• a quality black rip-free nylon backpack for one rifle 


• two external pouches and nose pocket with zip 

• 130cms long with 8cms thick foam padding 

• height: XXL (35cms) for `scope or extrem sight bases 

788 backpack 

• a longer padded backpack (134 cms) with two large 

external zipped pockets and a nose pocket 


• excellent internal padding 

787 heavy padded slip 

• an inexpensive (128 cms) padded slip with 

carry handles and shoulder strap 


page 110


451 roller carry bag 

• square vertical profile for maximum size to capacity ratio 

• three seperate zipped mesh compartments in top half for 

safe storage of individual items of equipment during transit 

• clear lower section with zipped overlay to seperate top 

and bottom halves of the bag 

• two zip closure external top panels of equal length 

• heavy-duty snap toggles and shoulder straps 

• extending rigid pull handle with snap-lock for position 

• additional grab handles either end 

• quality rollers 

• 80 x 40 x 40 cms (airline acceptable!) 

450 shooters carry-all 

• hard wearing and very robust lightweight nylon 

• rigid base with wide-spaced wheels one end 

• tow handle with zip cover extends at other 

• one end, two large side zipped pockets 

• zipped and removable full-size base panel 

• two carry handles and one strong shoulder strap 

• 80 x 40 x 40 cms (airline acceptable!) 

• dark blue 

450K 

• as 450 above but reduced in size for shooters 

requiring a slightly smaller bag 

• two carry handles and one strong shoulder strap 

• 70 x 40 x 35 cms 

• dark blue with white piping 

page 111

morini carry cases and rifle slips 

951 aluminium case 

• for one rifle with sights 

• rigid outer with inner laminate 

• lockable clasps 

• matt silver finish 

• 122 x 28 x 11 cms (48“ x 11“ x 4.3“) 


• as 951, but with wheels 


• for two rifles 


• strong hinges and lockable clasps 

• 122 x 33 x 11 cms (48“ x 13“ x 4.3“) 


• as 949 above, but with wheels 



• rigid outer with stiff inner laminates 


• 121 x 25 x 10.5 cms (48“ x 10“ x 4.1“) 


• for two rifles with sights 



• 122 x 33 x 10.5 cms (48“ x 13“ x 4.1“) 

952 plastic rifle case 


• lockable with two catches 

• 122 x 26 x 11 cms (48“ x 10.2“ x 4.3“) 


• for two rifles with sights 

• lockable with two catches 

• 132 x 32 x 11 cms (52“ x 12.6“ x 4.3“) 



• budget priced 

• 121 x 23 x 10 cms (48“ x 9“ x 4“) 


• watertight and very stable design 

• stainless steel ball bearing wheels with 

durable tire for easy transport 

• 126 x 33.5 x 12.5 cms (50“ x 13.2“ x 4.9“) 

page 112


452 backpack pistol bag 

• hard wearing lightweight nylon 

• clamshell design so the bag splits into two equal halves 

• sides reinforced for rigidity with padding on the insides 

• lid and base are internally egg-box foam padded 

• two padded shoulder straps and a carry handle 

• 50 x 40 x 18 cms (19.7“ x 15.8“ x 7.1“) 

980 trolley case 

• for two pistols 

• aluminium case with 

lockable clasps 

• 10 cms foam padding 

• positional dividers to 

personalize your case 

• 48 x 36.5 x 12.5 cms 

(19“ x 14.4“ x 5“) 



• robust hinges and locks 

• incredible value 

• 40.5 x 31.5 x 10 cms (16“ x 12.5“ x 4“) 

989 plastic case 


• stable and watertight design 

• 44 x 29.5 x 16 cms (17.3“ x 11.6“ x 6.3“) 

page 113

morini target changers 

120-100 50 metre free pistol and 100 metre rifle 

• for 230 volts (110 V / 60 Hz available without surcharge) 

• self-contained unit with 55 metres of cable (extra needed for 100 yards) 

• with one shooter control for forward / reverse target movement 

• has a single stainless steel electric drive situated above the target 

• the drive is easily removed for maintenance and is electrical standards 

compliant - cannot be retro-fitted to earlier models 

• the drive guarantees first target use - ensuring no losses 

• external casing of improved powder-coating for longer weatherproofing 

• 3mm back-stop deflector plate is now of a higher-specification material 

• simple pull-handle allows spent rounds to drop from collector to your disposer 

• bullseye height 72 cms from the ground 

• 124 x 66.5 x 42 cms 

• weight: 76 kgs 

can be used for 50 metre rifle with 126-50 guide plate 

available for larger calibres without bullet deflector plate 130-100 

118-50 drive unit made of stainless steel 

110-50 50 metre rifle 

• technical qualities as 120-100 

• bullseye height 58.5 cms from the ground 

• 99 x 49.5 x 38 cms 


available for larger calibres less bullet deflector plate 112-50 

about our products 

Gehmann target changers are the most diverse in the market - used at all levels - private, club, international and Olympic competition. 

They are designed to be trouble free in all theatres of operation with any form of climate. They are easily transported for situations where 

storage away from the normal installation is desirable and very simply connected-up, ready for service, with a minimum of help. 

Constructed of steel but weather-proofed, they operate with a minimum of moving parts to eliminate the possibility of malfunction in 

the course of competiton - reliability being our watchword. 

Operating from a choice of 12 volts with batteries or 230 volts mains-transformed (110 V / 60 Hz option), in banks of up to six at a time, 

they may be individually controlled by the shooter at the firing point. 

Target numbering has I.S.S.F. approval - so with video coverage both scoring and the tension involved can be relayed to and appreciated by 

spectators. Shooters can benefit from this during practice. 

Installations can be supplied with drums of cable (that including connectors), or if a more permanent installation is required, hard-wiring plans 

to customer’s specification. 

Suitable foundation plans are available if required. 

Most importantly - these are considered environmental friendly as they trap spent rounds for final disposal. 

page 114

target changers morini 

110N 50 metre small-bore rifle 

• a self-contained changer with one 55 metre drum of cable and 

one shooter´s control for forward and reverse target drive 

• for 230 V mains (110 V available without surcharge) 

• bullseye height 60 cms above ground 

• 100 x 50 x 37 cms 


110 for 50 metre rifle but battery powered 

120N 100 metre small-bore rifle and 

50 metre free pistol 

• for 230 V mains (110 V available without surcharge) 

• a self-contained changer with one 110 metre drum of cable and 

one shooter´s control for forward and reverse target drive 

• for 50 metre small-bore rifle guide plate 126 needed - extra 

• bullseye 70 cms above ground 

• 124 x 63 x 41 cms 


120 as 120N but battery powered 

130 for larger calibers 

• supplied without bullet trap 

• as 120 without cable or switch 

131 for 50 metres or more 

• for 230 V (110 V available) 

• one unit with 55 metre drum of cable and 

one shooter´s control switch to feed the targets 

• for 50 metre rifle or free pistol 

• 100 metre extension cable available (extra) 

• feeds up to 100 targets from the top hopper 

• shot cards drop to bottom collector 

• spent rounds lodge in the trap 

• bullseye height 90 cms above ground 

• 148 x 60 x 57 cms 


170 High resolution video-systems for all shooting 

distances, available for out- or indoor usage 

• can be used for training with one or two individuals or 

as a means of monitoring small groups 

• ideal for self-scoring using Gehmann model 

110 and 120 changers without need to scope shots 

• set consisting of: 

1. monitor/screen 

2. monitor-mount (wall bracket) 

3. coax-cable 

4. housing (weatherproof) 

5. camera 

6. lens 

2 

These video-systems can be arranged for your personal need. 

Please inquire. 

1 

3 

6 

5 

4 

page 115

morini target changers 

195 remote-control electronic 

air rifle and air pistol changer 

• free standing and operated by remote control only 

• one of 70 targets in the top hopper drops down ready for shooting whilst 

the shot card drops to the catcher at the base 

• following target appears automatically 

• easily convertable from rifle to pistol targets 

• pellet trap is easily removed 

• nickel-plated steel 

• 110 volt option without surcharge 

• 60.5 x 15 x 19 cms 


182 electronic changer set 

• interchangeable target holder for air rifle and air pistol only 

• the 230 V motor ( 110 V available) can be instantly switched 

from forward to reverse and is fitted with a sensor to reduce 

from fast to slow drive with minimal target travel prior to 

turn-around 

• especially silenced pellet trap to assist competitors 

• wired for installation without lighting 

• a modification is available for crossbow 

180 manual air rifle changer set 

• comprises a manually operated rotating drive wheel with V-belt 

to the target transporter drive which is operated by the shooter 

• includes pellet trap with target holder and running cords 

• for standard size air rifle targets 

180LP manual air pistol changer set 

• as 180, with larger pellet trap and target holder - can be used for rifle 

182,180,180LP are available illuminated - extra 

100 25 metre 

turning-target changer 

• 5 turning targets coupled to a 3-phase motor 

• T.P.E. timing for all known I.S.S.F. disciplines 

and displayed on the control mechanism 

• mechanical linkages that are smooth and accurate 

to within 0.2 seconds 

• aluminium, the changer is totally weather-proofed 

• supplied assembled and wired with 8 metres of cable 

• foundation plans available if required 

101 10 metre air pistol 

turning-target changer 

• 5 turning targets driven by a geared 230 volt motor 

• timing for 3 - 7 second turns or rapid-fire 

over 4, 6, 8 or 10 seconds 

• easily mounted against a wall and sold without pellet trap 

page 116

target changers morini 

187,188 and189 air weapon holders 

• air rifle or air pistol 

• 1mm thick and containing a 3mm sprung backstop 

187 air rifle: 10 x 10cms targets 

188 air pistol: 17 x 17cms targets 

189 air rifle and air pistol: both 10 x 10cms & 14 x 14cms targets 

191 clay disk and standard 

target holder 

• for both 10 x 10cms and 14 x 14cms standard targets 

• vertical posts for clay disc targets 

113 50 metre small-bore rifle targets 

• 250 numbered targets on one band (I.S.S.F. approved) 

115 repair stickers for above 

• 250 x 50 metre bulls to suit above 

124 50 metre free-pistol targets 

• 100 numbered targets on one band (I.S.S.F. approved) 

125 target repair stickers for above 

• 100 bulls to suit the above 

114 & 116 target patches 

• 1000 easy-peel stickers 

114.S 15mm black 

114.W 15mm white 

116.S 19mm black 

116.W 19mm white 

All kind of targets available upon request 

284 4-fold waterproof mat 

• exceptionally heavy-duty and durable waterproof mat 

• plasticoating on all surfaces with a large area of non-slip rubber elbows 

• thick foam padding for long-stay comfort on even the most difficult terrain 

• rugged handles to carry rifle and equipment on-range 

287 fluro rain cover 

• rainproof cover to protect rifle and sights in wet conditions 

• maintains expensive equipment and protects your investment 

against worst condtions 

page 117

morini gehmann teamwear 

864 rucksack 

• Gehmann dark blue with `Team Gehmann‘ logo 

• exceptionally lightweight, rugged, rain-proof nylon 

• multi-pocketed externally with good zips 

• adjustable and very comfortably padded shoulder straps 

• external top hang-loop 

860.B polo shirt 

• `Fruit of the Loom´ 100% cotton shirt 

• `Team Gehmann‘ logo on left sleeve 

• circular logo on the chest 

• Gehmann dark blue 

• small, medium, large and extra large 

860.W white 

862 cap 


• longish peak 

• multi-adjustable for all sizes 

catalogue available in CD or DVD format if required 

868 headband 


• soft towelling 

• velcro-fastens behind head 

867-G key ring 

• a hollow-centre gold bullet on a key ring 

• keeps small things safe 

867-S black 

pin badge 

• free with each Teamwear item while stock lasts 

page 118

eferences 

olympic, international, national and club 

champions apply gehmann 

Vebjoern Berg 

Norway 

winner World Cup final 

winner World Cup 

European champion 

Matt Emmons 

USA 

Olympic champion, 

World champion 



Katerina Emmons 

Czech Republic 

Olympic champion 



Gyda Olssen 

Norway 

European champion (multiple) 

Norwegian Champion 

Gagan Narang 

India 

World record holder 



Thomas Farnik 

Austria 

World champion (multiple), 

European champion (multiple), 

World Cup final winner 

World Cup champion 

Cheon Min Ho 

Korea 

Finalist Olympic Games 


Benjamin Aicher 

Germany 

vize European champion 

national league champion 

Petra Horneber 

Germany 

World champion (multiple) 

World Cup champion (multiple) 

German champion (multiple) 

Jean Pierre Amat 

France 


World champion (multiple), 


World record holder 

Team Belorussia 

World champions (multiple) 

European champions (multiple) 

Angela Kugele 

Germany 


German champion 

European record holder 

German record holder 

Sylvia Aumann 

Germany 




Hubert Bichler 

Germany 




Frank Dobler 

Germany 





Franck Badiou 

France 



Lee Eun Chul 

Korea 



Jonas Edmann 

Sweden 



Swedish champion (multiple) 

Ljubov Galkina 

Russia 


World Cup final winner, 

World Cup champion, 


Rebecca Frank 

Germany 




Tatiana Goldobina 

Russia 

World Cup champion (multiple) 

2nd Olympic 

Je Sung Tae 

Korea 

Finalist Olympic Games 

Kristoffer Skelland 

Norway 


Team Norwegen 


P. T. Raghunath 

India 

winner Asian Games 

Commonwealth Shooting 

Championships winner 

page 119

gehmann gmbh & co. kg 

Karlstrasse 40 

76133 Karlsruhe / germany 

your dealer: 

Tel: (049) (0)721 24545 - 46 

Fax: (049) (0)721 29888 

E-mail: info@gehmann.com 

Internet: www.gehmann.com

Gehmann

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?