information about Taylor's new - Taylor Machine Works

Sudden Service, Inc.
Corporate Headquarters
649 North Church Ave.
Louisville, MS 39339-2022
Phone: (662) 773-8056
Fax: (662) 773-9160
After Market Support
"You Can Depend On Big Red" is a personal and collective commitment
from the Taylor "Big Red" Team to every customer. Customer needs and
expectations are priorities for Taylor engineering, manufacturing,
marketing, and service organizations.
Sudden Service, Inc. and our worldwide Taylor dealer network are ready
to respond to your requests for support requirements twenty-four hours a
day, seven days a week!
Warranty - 12 month or 2,000 hours parts and labor. Optional warranties
are available.
Taylor Machine Works, Inc.
650 North Church Ave.
Louisville, MS 39339-2022
Phone: (662) 773-3421
Fax: (662) 773-9146
taylorbigred.com
Disclaimer
Because of our ongoing commitment to product quality and innovation, we reserve the right, at any time, to
discontinue or change specifications, prices, designs, features, models or equipment without incurring obligation.
Preliminary 3/07
TXH-400L

Left Hand side of Console
Right Hand side of Console
CHASSIS
• All welded steel chassis
• Channeled rails accommodate more features
• 50-gallon capacity heavy gauge steel wall fuel tank with lockable cap
and integral strainer
• 45-gallon capacity hydraulic tank, heavy steel wall; Promotes system
cooling and has full flow in tank return filtration filter
• The fuel tank and hydraulic tank are bolt-on
• All service and daily checks can be made easily
• “ORS” face seal o-ring fittings to control leaks
• Dual ported tilt control valve prevents mast twist and holds the load in
the event of a single hose failure
OPERATOR STATION
• Shock absorbing center mounted 2-door cab standard
• Shock mounted offset mount operator station on KS models
• Excellent visibility through mast, forward and rear, meeting
proposed visibility standards
• Fingertip electric joystick controls for smooth precise control
• Anti-slip steps and handrails for 3 point mounting and
dismounting (meeting proposed ANSI B56.1 standard)
• 4 step access on and off
• Premium adjustable vinyl seat with arm rests; 15°L/20°R seat
rotation; air suspension for reduced vibration
• Orange anti-cinch operator restraint allows movement for
operator comfort
• Tilt steering wheel for operator comfort
• T-shaped dash with hinge down instrument panel
• Finger tip full hydrostatic steering
• Convex, wide angle rearview mirrors
• Left pedal combines both inching and brake controls
• Right pedal brakes only
• All reset circuit breakers instead of fuses
• Forward and reverse motion alarms standard
• All models meet ANSI B56.1 FOPS operator protection
Hydraulic Oil Filter Element
††See specification sheet for specific model information
Options are available on all TXH models

TAYLOR TXH SERIES PRODUCT LINE - WHEELBASE & CAPACITIES
• TXH-300L (30,000-lb. Cap. at 48" L.C., 148" Wheelbase)
• TXH-300KS (30,000-lb. Cap. at 48" L.C., 148" Wheelbase)
• TXH-350L (35,000-lb. Cap. at 48" L.C., 148" Wheelbase)
• TXH-350KS (35,000-lb. Cap. at 48" L.C., 148" Wheelbase)
• TXH-400L (40,000-lb. Cap. at 48" L.C., 155" Wheelbase)
ENGINE
• Tier Certified Cummins electronic, low emissions (see specification sheet for engine detail)
• Lower fan speed and engine speed for less noise
• Muffler outboard with vertical stack for improved visibility and noise control
• Electronic diagnostics on engine with fault code history for fast problem location
• Built in shut down system for engine and transmission
• High performance pusher fan which blows dust and debris away from operator
• All service and daily checks can be made easily
• High capacity charge air, engine coolant and transmission cooling system for dependable operation
• Easily serviceable 3-section cooling system
• 12 volt with 130 amp alternator electrical system
• Fan shroud mounted to engine
STANDARD EQUIPMENT LIST FOR TXH-300L ,TXH-300KS, TXH-350L, TXH-350KS
• Lockable Fuel Cap w/Strainer
• Dry-type Air Cleaner w/Safety Element & Restriction Indicator and Vertical Air
Intake Extension
• Muffler w/Stack Guard
• 12-Volt Electrical System; 130 Amp Alternator & Circuit Breakers
• Taylor Integrated Control System (TICS) using J1939 CANbus Technology with
Pin Code Protection
• Anti-restart Ignition Switch
• Tilt Steering
• Heavy-duty Battery
• Lighted Instruments
• Electric Horn
• Keyswitch-actuated Amber Strobe Light
• Reverse-actuated Backup Alarm
• Forward Alarm
• Four work lights, 2 front mast mounted: 2 rear A frame mounted with one control switch
• Rear View Mirrors
• Powershift Transmission - 3 speed w/Inching, Modulated, Electric Shift Control,
Air/Oil Cooling with Automatic Powershift Control
• Taylor Steer Axle
• Bolted Planetary Drive Axle and Positive Rim Mountings
• Air Cooled Wet Disc Brakes Hydraulic Actuated with Cooler for Brake Oil and
Hydraulic Oil
• Hydrostatic Power Steering
• Cab, 2-door, includes one 40,000 BTU heater, one circulation fan
• Front and rear windshield wipers with variable slow speed/stop plus 2 speeds wiper
control switch, front windshield washer, dome light and all glass tinted
• Door hold back latches with trip button, gray insulation, and black floor mat inside cab.
Cab color black only.
• Adjustable Vinyl Covered Air Suspension Seat w/Arm Rests, Orange Seat Belt and
OPS Switch, Seat has 15°L/20°R rotation
• Full Flow Wire Mesh Suction Strainers & Full Flow 10-Micron Return Filter in Tank
• See specification sheet for standard tires
TRANSMISSION
• Heavy-duty 3-speed Powershift transmission
• High capacity 12 plate clutch system for added durability
• Operator controlled hydraulic inching for precise vehicle position control
• Automatic power shift control (standard)
• Full directional modulation for soft directional changes
• Rated at 215 HP plus in heavy industrial applications
• Sealed column-mounted, electric roll shift for ergonomics and durability
• Air to oil transmission cooler is part of the 3-section cooling system
• Cooler has wide fin spacing to resist plugging
• Remote mounted filter to reduce oil spills
• Flex plate drive

ULTRA-VU Mast with excellent visibility
Lift chains are not nested in the mast rails and are
visible on all the TXH Models
Greaseable, shielded main rollers
Cast nylon side thrust pads
Pressure compensated lowering control
Emergency manual lowering valve system
Forward facing alarm
Overhead tilt cylinders
with adjustable ends and greaseable,
spherical bearings for greater mast
stability and life
Overhead rear work lights
for improved safety and visibility
Front mounted mast work lights
for improved safety and visibility
Key-switch actuated amber strobe light
Heavy-duty carriage with excellent durability
Greaseable, shielded main rollers
Cast nylon side thrust pads
One of the most spacious cabs in the industry
Shock absorbing and center mounted
Raised for ease of service
Lightweight removable floor panels
Vertical, outboard, muffler stack
for improved visibility and noise reduction
Quick release removable side panels
Sliding engine hood
Easily removable for greater access
(All service and daily checks can be
made easily)
Pin mounted full width adjustable forks
(96” forks standard on all TXH Models)
Heavy-duty bolted planetary drive axle
6 planetary pin force cooled wet disc brakes
Brake saver system does not allow operator
to drive through parking brakes
Sloped Counterweights
for improved rear visibility
Dual element air cleaner
with restriction indicator
Rear back-up alarm
Greaseable hinge battery box
††See specification sheet for specific model information
Options are available on all TXH models
Heavy-duty industrial steer axle
Simple, proven, durable design single steer cylinder with sealed
tapered roller bearings throughout and dual steer links with large
hardened pins and steel bearings