SHZ 30 LCD, SHZ 50 LCD, SHZ 80 LCD, SHZ 100 LCD ... - Баутерм

More documents

Recommendations

Info

7. Fault rectification by the qualified installer 22 Code enquiry <strong>LCD</strong> display Button Note Fault / defect code / Info Possible cause / defect Rectification No display in the control panel. � Menu selection. � Code enquiry for service. No voltage. No connection to the control unit. Control unit defective. Restore voltage supply. Check that connector „X2“ is correctly fitted H . Check control unit (21) and if necessary replace. Ca-scale symbol shows Heating element scaled. Heating continues. Descale element. Symbol will disappear. Service symbol. Code Continuous display - setpoint temperature. Code Code No anode protection. Code Last preset setpoint values active. Possibly continuous display of . Defect symbol >> flashing. Code Continuous display - setpoint temperature. Code No heating-up symbol. Code Running dry protection. Water heating continues. Maintenance requirement. Temperature sensor fault. Parasitic current anode fault. Communication fault with electronic „regulator“ and „control unit“ modules. No water heating. Defect code enquiry. Corrective maintenance urgently required! Temperature sensor defective. Safety thermal cut-out (STB) actuated. Service code enquiry. Service / maintenance required. Check that connector „X10“ is correctly fitted L . Inspect temperature sensor. Check that connector „X7“ is correctly fitted L . Check parasitic current anode and wiring. Check that connector „X2“ is correctly fitted on both modules H . Check connection cable and modules. Check that connector „X10“ is correctly fitted L . Inspect temperature sensor. Eliminate error and reset thermal cut out. Heating element defective. Rectify cause and unlock; inspect STB and if necessary replace. No water in the reservoir. Fill the reservoir with water. No anode current. Check that connector „X7“ is correctly fitted L . Inspect parasitic current anode and wiring. Code Relay defective. Replace regulator electronic module (23).
Notizen 23 English
Page 1 and 2: SHZ 30 LCD, SHZ 50 LCD, SHZ 80 LCD,
Page 3 and 4: A C D 1 14,0 h 12,0 h Ø12mm elctro
Page 5 and 6: L M N O Heizkörper 230V 3 x 2 kW 2
Page 7 and 8: 1.6 Standardeinstellungen Standarda
Page 9 and 10: 2.7 Wasseranschluss � Geschlossen
Page 11 and 12: 4. Störungsbeseitigung durch den B
Page 13 and 14: 6. Maßnahmen bei Sonderschaltung f
Page 15 and 16: 15 Technik zum Wohlfühlen Garantie
Page 17 and 18: 1.6 Standard settings Standard disp
Page 19 and 20: 2.7 Water connection � Unvented (
Page 21: 4. Fault rectification by the user
Page 25 and 26: 1.6 Réglages standards Affichage s
Page 27 and 28: 2.7 Raccordement hydraulique � So
Page 29 and 30: 4. Dépannage par l’utilisateur I
Page 31 and 32: Notizen 31 Français
Page 33 and 34: 1.6 Standaardinstellingen Standaard
Page 35 and 36: 2.7 Wateraansluiting � Gesloten (
Page 37 and 38: 4. Storingen verhelpen door de gebr
Page 39 and 40: Notizen 39 Nederlands
Page 41 and 42: 1.6�Nastawy�standardowe Wskazan
Page 43 and 44: 2.7�Podłączenie�wody � ciś
Page 45 and 46: 4.�Usuwanie�usterek�przez�U
Page 47 and 48: Notatki 47 Polski
Page 49 and 50: 1.6�Standardní�nastavení Stan
Page 51 and 52: 2.7�Přípojka�vody � Tlakov
Page 53 and 54: 4.�Odstraňování�poruch�už
Page 55 and 56: Poznámky / Jegyzetek / Äëÿ çà
Page 57 and 58: 1.6 Ñòàíäàðòíûå íàñò
Page 59 and 60: - Âûáåðèòå ðàçìåðû
Page 61 and 62: 4. Óñòðàíåíèå íåèñï
Page 63 and 64: Äëÿ çàìåòîê 63 Ðóññê

SHZ 30 LCD, SHZ 50 LCD, SHZ 80 LCD, SHZ 100 LCD ... - Баутерм

Create successful ePaper yourself

Delete template?

Save as template?