Gym.Truss.1 - City Tech OpenLab
Gym.Truss.1 - City Tech OpenLab
Gym.Truss.1 - City Tech OpenLab
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PROF. PAUL C. KING RA<br />
New York <strong>City</strong> College of <strong>Tech</strong>nology<br />
Learning Community<br />
ARCH_1290 & ARCH_1200<br />
Fall 2011<br />
<strong>Gym</strong>.<strong>Truss.1</strong><br />
Overview:<br />
Adjust Levels<br />
ADDING STEEL<br />
STRUCTURAL COLUMNS AND ROOF TRUSS<br />
Add structural columns and long span roof trusses to the <strong>Gym</strong>.<br />
From the North Elevation make room for the height of the Long Span Truss.<br />
Add Columns Work from Level 1 (base level) and set the Top Level to be "Bottom of Truss".<br />
Place steel columns along the exterior wall at the intersections of the grids<br />
to support the long-span truss we will add next. Select W10x49 columns.<br />
LC.1200-1290 Tutorials.03 Bldg.<strong>Gym</strong>- Prof.King V.1.0.docx<br />
Copyright © 2011 Paul C. King<br />
Page 13 of 17<br />
Building Development | Revit
PROF. PAUL C. KING RA<br />
New York <strong>City</strong> College of <strong>Tech</strong>nology<br />
Learning Community<br />
ARCH_1290 & ARCH_1200<br />
Fall 2011<br />
Add Truss<br />
Select Structure > Truss > Load Family (Structural > Trusses > Pratt Flat Truss)<br />
Important: Snap<br />
from "point" to "point" at tops of columns when placing trusses<br />
Attach Truss to Roof Select the Truss. Modify|Structural Trusses > Attach Top/Bottom<br />
Select the roof and the truss will update to match the underside of the roof<br />
Truss - Roof Link<br />
The top of the Truss is now associated with the bottom of the roof.<br />
LC.1200-1290 Tutorials.03 Bldg.<strong>Gym</strong>- Prof.King V.1.0.docx<br />
Copyright © 2011 Paul C. King<br />
Page 14 of 17<br />
Building Development | Revit
Change language