HubbellBuilding Automation EnergySavingLighting Controls hubbell ...

LXTB
WIRING DIAGRAMS
PRODUCT IMAGE
LXJNSYS
LX JENEsys Network
Interface Components
LXJNSYS
KEY FEATURES
CPT
LON Network
Processor Board
INTERFACE SCREENSHOTS
• PROGRAMMING INTERFACE:
- Real-time programming and monitoring of the LX
lighting control system through your PC
- No software required—built-in web server provides
connection via any Internet Explorer ® compatible
browser
-Graphical User Interface (GUI) makes programming
both intuitive and simple
-Local or remote access via the local network or Internet
-Can connect multiple users at once
-Sophisticated user account/password manager
LXTB Graphical
User Interface
• SYSTEM INTEGRATION:
-Integrates LX lighting control systems and Building
Automation Systems (BAS)
-Integrates with LonWorks ®, BACnet (IP and MSTP),
and Modbus standards
-Automatically generates all required control points
and documentation for integration with the selected
protocol
-Powered by the revolutionary NiagaraAX Framework®
120/277/347
VAC In
Relays
Relay
Boards
LX48 Panel
Relays
Notes:
LXTB Graphical User Interface Tablet connects to any
LX Panel with RJ45 Cat 5E Cable included with tablet.
ORDERING INFORMATION
MODEL
LXJNSYS LX JENEsys Controller with
Management Software, LON Network
Module and Power Supply
LXJNSYS2LON LX JENEsys Controller with
Management Software, LON
Integration Support, LON Network
Modules and Power Supply
LXJNSYS2BACNETIP LX JENEsys Controller with
Management Software, BACNET IP
Integration Support, LON Network
Module and Power Supply
LXJNSYS2BACNETMSTP LX JENEsys Controller with
Management Software, BACNET MS/
TP Integration Support, LON Network
Module and Power Supply
LXJNSYS2MODBUS LX JENEsys Controller with
Management Software, MODBUS
Integration Support, LON Network
Module and Power Supply
LXJNCOM56KM1* LX JENEsys 56Kps Modem for LX
JENEsys Controller
APPLICATION
• The LX JENEsys device is used to allow the end-user remote access to the
LX Networked Lighting Control System. A connection to the building local
network is required. The device contains a user settable static IP for this
connection.
• The LX JENEsys requires a 120 VAC 15 or 20 Amp receptacle for connection of
the included power supply.
• All versions of the LX JENEsys contain the on-board web server for remote
access.
• Each LX JENEsys device is Building Automation System specific. The
integration system standard needs to be determined in order to obtain the
correct device prior to ordering.
Note: Not available with LXJNSYS2LON.
Ph. (888) 698-3242 :: Fax orders (512) 450-0864 :: hubbell-automation.com
Ph. (888) 698-3242 :: Fax orders (512) 450-0864 :: hubbell-automation.com
Thirty7