Eppendorf/NBS CelliGen BLU - TekniScience.com

CelliGen BLU Bioreactor Specifications 1
Total Volume 5.0 Liters 14.0 Liters
Single-Use
Cell Culture Vessel
Working Volume 3.75 Liters 10.5 Liters
Minimum Volume 1.25 Liters 3.5 Liters
Controls up to 32 control loops; stores 10 recipes and 8 process variables for trend graphing.
Controller
Control Station
Includes an industrial touchscreen monitor/user interface, 3 built-in pumps and connectors for
all utilities and communications signals
Touchscreen Interface/Display 15-inch (38.1 cm) color industrial monitor with adjustable-angle swivel
Indication
Digital display in 0.1°C increments
Temperature
Range From 5°C above ambient temperature to 40°C
Control
P&I for heating using a Heat Blanket (cooling via ambient environment)
Sensor
Platinum RTD probe
Drive
Permanent magnet motor with high torque input
Indication
Digital display in 1 rpm increments
Agitation
Range
25 - 200 rpm
Control
PI-controlled
Impellers
Pitched blade (upflow or downflow selectable via touchscreen)
Exhaust
Filter
0.2 µm disposable filter
Tube
Heat blanketed
3- or 4-Gas System Up to 4 gases, including air, N 2 , CO 2 and O 2 , delivered to sparge and overlay
Flow Control
Automatic or manual options
Aeration
Sparge
1, 3 or 4 TMFCs (0.002 - 0.1 SLPM) – Automatic option
1 Rotameter (0.001 - 0.1 SLPM) – Manual option
Optional Overlay
1 TMFC (0.1 - 3.0 SLPM) – Automatic option
1 Rotameter (0.1 - 3.3 SLPM) – Manual option
Sparge Element
Porous microsparger (6 - 12 µm)
Inlet Filters
0.2 µm disposable filter
Indication
Digital display in 0.01 pH increments
pH
Range
6 - 8 pH
Control
P&I
Probe
Noninvasive optical pH probe. Single-use fluorescence sensor is included with each vessel
Indication
Digital display in 0.1% increments
DO
Range 0 - 200%
Control
P&I
Probe
Noninvasive, reusable polarographic probe
Assignable high-performance peristaltic pump
Pump 1
Fixed speed (14 rpm) or variable-duty cycle
Pumps
Available control modes: Off, On, Prime
Assignable high-performance peristaltic pumps
Pumps 2 and 3
Fixed speed (109 rpm) or variable-duty cycle
Available control modes: Off, On, Prime
Utilities Gas 5 - 6 PSIG maximum
Electrical Requirements
100 - 120 VAC 50/60 Hz, Single phase, 15 Amps
200 - 240 VAC 50/60 Hz, Single phase, 15 Amps
Control Station
88 lbs. (40 kg) with touchscreen
Net Weight
Touchscreen
15 lbs. (6.8 kg)
Vessel empty without motor 2 5.0 liter vessel: 2.9 lbs. (1.3 kg) 14.0 liter vessel: 3.9 lbs. (1.8 kg)
Overall Dimensions
(W x D x H)
Control Station & Vessel 25 x 24 x 34 inches (63 x 61 x 86 cm), including touchscreen
Input/Output Connections
Analog Inputs/Outputs
Up to 7 analog inputs and up to 7 analog outputs to add auxiliary equipment, usable as follows:
TMFC configuration
••
3 inputs and 3 outputs – interchangeable 0 – 5 V or 4 – 20 mA
••
Up to 4 additional 0 – 5 V inputs and 4 additional 0 – 5 V outputs available, depending on
and Comm Ports
Import firmware/software upgrades and export trend data
2 USB Ports
Connect optional 8-port serial box for scales, etc.
Communications Port
For optional BioCommand ® /SCADA software
Ambient Operating Conditions
10 - 30°C up to 80% relative humidity, non-condensing
Regulatory Compliance
CAN/CSA-C22.2 Nos. 1010.1 & 1010.2.010
UL Standard UL-61010A-1 & 61010A-2-010
1. Specifications subject to change without notice. 2. Vessel weight does not include probes, exhaust heater or other options.
CelliGen and BioCommand are trademarks of New Brunswick Scientific. C-Flex is a trademark of Saint-Gobain Plastics. Clave is a trademark of ICU Medical, Inc.
New Brunswick Scientific - A culture of innovation
USA Headquarters PO Box 4005, Edison, NJ 08818-4005 • bioinfo@nbsc.com
800.631.5417 • 1.732.287.1200 • Fax: 1.732.287.4222 • www.nbsc.com
B-4025 10XC1009