TAPER PlUG VAlVES

TAPER PLUG VALVES
Figure numbering
The Valves are available in a wide range of variants, each being identified
by figures and letters which provide all pertinent characteristics of
each individual valve required. In addition always specify temperature,
pressure, and medium the valve is to be used on. This facilitates our
choosing the appropriate lubricant.
Before the actual identification number, the number of the required
Product Group must be stated.
Note: Combinations shown in a thin print are not shown in this catatalogue.
Example:
9 - AV 70127 C
I
Taper Plug Valve
American Regular Pattern
Enclosed gear with vertical handwheel
Cast Steel (Body)
Steel (Plug)
Straightway Rectangular Port Flanged Class 150
4
July 99.