E.g. Wheels, Bearings, Hubs, Drive Shafts, Etc.
E.g. Wheels, Bearings, Hubs, Drive Shafts, Etc.
E.g. Wheels, Bearings, Hubs, Drive Shafts, Etc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Wheel <strong>Bearings</strong><br />
The KLANN Wheel Bearing/Bush Tool KL-0039-Series !!!!!<br />
The big advantages of the unrivalled bearing/bush tools are:<br />
Modular system with universally combinable centring and pressure rings. This system requires substantially fewer single<br />
parts than the conventional tool sets for axle repair.<br />
Possibility to complement the set universally with additional centring and pressure rings, two possible drives (mechanical and<br />
hydraulic), optional use of press support/sleeves and press frames. All these features make this tool almost universal in its eld<br />
of application.<br />
Wheel bearing removal<br />
Identication of the required parts and assembling the tool:<br />
Measuring the inner and outer bearing-Ø<br />
Determination of pressure and centring ring<br />
Assembling and/or mounting the press piece.<br />
Measure bearing-Ø<br />
Identify pressure ring<br />
(with bearing outer-Ø / steering knuckle bore-Ø)<br />
Identify centring ring<br />
(with bearing inner-Ø)<br />
Inner-Ø<br />
Wheel Bearing<br />
Outer-Ø<br />
observe the limit stop on<br />
the steering knuckle if<br />
necessary.<br />
Pressure ring<br />
Wheel Bearing<br />
Centring ring<br />
Wheel Bearing<br />
Wheel Bearing<br />
Centring ring<br />
Pressure ring<br />
Adaptor<br />
Note: The special design of the press piece enables the safe and accurate alignment when changing a wheel<br />
bearing. It ensures that during the removal and installation of the wheel bearing there will only be a pressure on<br />
the outer bearing race, and that during the installation of the wheel hub there will only be a pressure on the inner<br />
bearing race. Thus, damage to the new wheel bearing is prevented. The combination of centring rings and<br />
pressure rings creates press pieces which can accurately be adapted to the required bearing-Ø.<br />
Mounting the wheel bearing tool (mechanical drive)<br />
Mounting the wheel bearing tool (hydraulic drive)<br />
Adaptor<br />
Pressure ring<br />
Nut<br />
Spindle<br />
Bearing cover<br />
Housing<br />
Centring ring<br />
Pressure ring<br />
Nut<br />
Spindle<br />
Housing<br />
Centring ring Adaptor<br />
Hydraulic cylinder<br />
Adaptor<br />
Housing<br />
Centring ring Adaptor<br />
Extracting the wheel bearing (mechanically)<br />
Extracting the wheel bearing (hydraulically)<br />
Note:<br />
A hydraulic pump is required to drive the<br />
hydraulic cylinder KL-0040-2500.<br />
3.1-1<br />
(76) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1
Change language