Tuckpointing & Painting Specifications - City of Urbana

More documents

Recommendations

Info

#1112-03 Tuck Pointing & Painting 3.3 PAINT SYSTEMS A. Provide three-coat work (unless otherwise specified), consisting of prime coat, intermediate coat and finish Coat, in texture and color as selected and approved by the Owner. B. Exterior paint systems are specified and identified herein by letter and the systems specified correspond to the finishes indicated on the Owner’s Schedule and Drawings. C. The herein specified paint systems indicate the minimum dry mil film thickness (MDFT) required for the particular paint system. Paint shall be applied at the manufacturer’s recommended rate to achieve the proper MDFT specified. If a manufacturer normally does not utilize an intermediate coat in its paint system to achieve the specified MDFT, then the intermediate coat may be omitted. 3.4 EXTERIOR PAINTING A. Paint System “A” – Paint Finish on Concrete, Masonry, and Stucco: Prime Coat: Masonry Surface Conditioner, tinted toward finish color Intermediate Coat: Exterior Masonry Paint Finish Coat: Exterior Masonry Paint MDFT: 6 B. Paint System “B” – Paint Finish on Ferrous and Galvanized Metal: Prime Coat: For new ferrous metal: Field-apply Ferrous Metal Primer. For shop primed ferrous Metal: Apply touchup primer. For galvanized metal: Galvanized Metal Primer touch-up. For existing ferrous and galvanized metal: Rust-inhibitive primer as recommended by manufacturer of finish coats. Intermediate Coat: Heavy-Duty Gloss Enamel Finish Coat: Heavy-Duty Gloss Enamel MDFT: 6 C. Paint System “C” – Paint Finish on Wood: Prime Coat: Factory-primed (new surfaces). Exterior Wood Primer (existing surfaces). Intermediate Coat: Exterior House and Trim Paint Finish Coat: Exterior House and Trim Paint MDFT: 7 3.5 CLEANING A. Clean and retouch the work as necessary for a first class job. All surfaces of the station or building and surrounding areas shall be left clean and neat in all respects, free from any paint spots, smears, smudges, or stain.
#1112-03 Tuck Pointing & Painting COMPLETE PROJECT COST as per specifications herein $ UNIT COST FOR ANY ADDITIONAL CMU REPLACEMENT NOT IDENTIFIED HEREIN $ UNIT COST (in SF) FOR ANY ADDITIONAL TUCKPOINTING NOT IDENTIFIED HEREIN $ COMMENTS:___________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ Signature of Company Official Company Name Print Name of Company Official Company Address Date City/State/Zip ( ) Telephone
Page 1 and 2: #1112-03 Tuck Pointing & Painting S
Page 3 and 4: #1112-03 Tuck Pointing & Painting A
Page 5 and 6: #1112-03 Tuck Pointing & Painting S
Page 7 and 8: #1112-03 Tuck Pointing & Painting m
Page 9 and 10: #1112-03 Tuck Pointing & Painting B
Page 11: #1112-03 Tuck Pointing & Painting 2

Tuckpointing & Painting Specifications - City of Urbana

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?