KOBELT.com

7170 jog lever
The Kobelt Jog Lever is the only Jog Lever of its kind in the
world made from bronze and stainless steel and can, therefore,
be installed in any location on the ship because of its materials
and watertight construction.
The control handle on the Jog Lever is spring centered to
neutral. By moving the lever to either port or starboard, a microswitch
will send a signal to a solenoid operated valve (Model
7144, 7145 or Model 7148) and will dispense oil to either the port
or starboard side of the steering cylinder. The Jog Lever does not
have a feedback or follow-up capability. The boat can be steered
readily with this device but the lever does not coincide with the
rudder position, just direction of travel. It is, therefore, called
a “Jog Lever”. When the lever is returned to mid-position, the
rudder will maintain its position.
Various finishes are available and the unit can be ordered
with the cable running straight out or down (see “side view”
diagram below). The cable configuration can be easily changed
in the field.
Weight
2.2 lbs. (1.0 kg)
Ordering Information
A Black epoxy base with chrome hub
B All black epoxy
C All chrome
D All polished bronze
1 Cable leading straight out
2 Cable leading down
SIDE VIEW
28
hydraulic steering and accessories