KOBELT.com
KOBELT.com
KOBELT.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7156 Rudder Stock Clamp<br />
The Rudder Stock Clamp can be used for Rudder Stocks<br />
from 3/4" (19mm) to 4 1/2" (115mm) diameter.<br />
Its purpose is to provide mechanical feedback for Auto<br />
Pilots, Power Follow-Ups and any electronic positioning of the<br />
rudder. The 7156 cannot be used as a Tiller Arm.<br />
There are two models available. The FL Unit (Fixed Lever)<br />
has a series of holes at 3/8" (9.5mm) intervals for connecting<br />
feedback linkage.<br />
The other Model, the AL Unit (Adjustable Lever), is equipped<br />
with a threaded rod and a lock nut which can be infinitely<br />
adjusted for any lever length. Should the threaded rod be<strong>com</strong>e<br />
too long, it can be cut to provide the shorter stroke.<br />
It is important that the axis of the connection hole is in line<br />
with the axis of the Rudder Stock when the linkage is installed.<br />
It is also very important that the linkage, in the mid-position, is<br />
square to the item controlled. Unequal travel will be obtained if<br />
this is not ac<strong>com</strong>plished.<br />
It is important that the fixing bolts are tight, but not<br />
over-tight. (See drawing for torque settings.)<br />
Weight<br />
1.5 lbs. (0.6 kg)<br />
MAX TORQUE=12 FOOT POUNDS<br />
7156 7174<br />
38<br />
hydraulic steering and accessories