Stagebar 2 - Martin

8
P3-200 System Controller
The P3-200 System Controller is a new
addition to Martin’s P3 System Controller
family for LED screens. The P3-200 combines
all the celebrated features of the P3-100
yet adds SD-SDI, HD-SDI and 3G-SDI input
capability for optimized use in TV/Broadcast
environments.
It retains all the advantages of the P3-100 System Controller
like built-in scaling and de-interlacing, and multiple video
protocol and resolution support. Direct DMX control of
brightness, color, pixelmapping and more is also included.
Other innovative features include a built-in graphical user
interface and more.
The P3-200 adds SD-SDI, HD-SDI and
3G-SDI to an already wide variety of video
input possibilities
P3-PC
A much requested product, the PC-based P3 System
Controller packs three powerful functions into one.
1. A PC-based P3 System Controller for smaller Martin LED
display setups up to 20000 pixels. (P3-PC license for Martin
One-Key required)
2. An off-line editor for the P3-100 and P3-200 System
Controllers to preprogram shows anywhere on your own
PC. Save and copy shows to the P3-100/200 using a USB
stick. (free-of-charge software)
3. A tool for firmware uploads and address/test Martin LED
displays before the P3-100/200 arrives on location. (freeof-charge
software)
Kinesys plug-in for P3-100/200
For applications requiring total integration with motion
control, this exciting new software feature for the P3-100
and P3-200 System Controllers enables real-time live position
and rotation control from a Kinesys automation and
motion control system and automatically adapts the position/mapping
of the LED display panels.
DMX 5.3 Splitter / RDM 5.5 Splitter
The Martin DMX 5.3 and RDM 5.5 Splitters
are the most economical devices available
to ensure proper data transmission levels and
protect controllers and DMX/RDM devices.
Both Splitters are useful in maintaining proper data levels
over long runs or several runs of DMX signal with the RDM
5.5 Splitter also capable of effectively handling RDM data
by avoiding data collisions and reducing discovery time
of RDM devices on the link.
Both the DMX 5.3 Splitter and RDM 5.5 Splitter help to
rectify disruptions in the DMX signal caused by bad cables
or bad connections by splitting the DMX or DMX/RDM
data link into five separate branches while boosting the
weak DMX signal to its original output level before it becomes
too low to be read by DMX devices.
Both Splitters are easily rack,
truss or wall mountable
Standard 3-pin
(DMX 5.3 Splitter)
or 5-pin (RDM 5.5 Splitter)
XLR Input and Outputs
BOOSTS DATA TRANSMISSION
AND PROTECTS DMX DEVICES
They can also protect any DMX controller and DMX fixture
against voltage surge on the data line, as well as prevent
reflection caused by long lines, too many connections, or
too many devices on the same line.
• DMX Splitter / Booster
• Opto-isolated DMX Output ports
• DMX loop through port with built-in
termination
• Optimized for Martin fixture firmware
upload
• Universal power supply
• Lightweight yet robust construction
• RDM E1.20 compliant (RDM 5.5 Splitter)
Rigging is easy using a
standard G-Clamp
In and Out PowerCon
connectors make for easy
daisy-chaining
(RDM 5.5 Splitter)
9