front linkage - MX

More documents

Recommendations

Info

FRONT LINKAGE AGRICULTURE High strength front linkage made for intensive use All MX front linkages are tailor made to each specific tractor make and model. Integral chassis plates form a strong chassis structure back to the tractors clutch area, hence working stresses are evenly distributed and the tractors strength is never compromised. Push bar Extra reinforcement connecting the linkage to the rear of the tractor A push bar is essential equipment for high powered tractors used for heavy duty applications. Rear supports Additional reinforcement from the clutch housing to rear axle Added strength to the tractor chassis. OPTIONS Effective on all types of terrain Lifting arms have two working positions: fixed where the implement is held rigid, or floating where the implement is able to follow ground contours.
P.04-05 Achieve maximum versatility from your tractor MX offer the ability to fit a front linkage and loader to the same tractor, which gives maximum machine versatility with minimum downtime, ensuring the tractors full potential is used. Unrestricted use of the loader is possible when the front linkage arms are in their folded position, then with the aid of its Fitlock II hitching system the loader can be removed in seconds, hence allowing unrestricted use of the front linkage. Extra versatility and more economic use of your tractor By integrating common loader and front linkage components (chassis, rear supports, hydraulic components, control systems, SHOCK Eliminator®) the unit cost can be significantly reduced. Changing from loader work to front linkage work or vice versa is done with minimum downtime. Power take-off High output with reliability you can rely on All MX Power take-off systems have been tested under extreme working conditions to guarantee their reliability. With the option of two possible directions of rotation, a perfect match can be achieved with all implements. Available for tractors from 50 kw to 150 kw (70 hp to 200 hp). Auxiliary hydraulic line Easy to reach connections Conveniently located near to the front of the tractor, the auxiliary hydraulic line allows easy connection of implements requiring a hydraulic service or a hydraulic top link. Fixed position Floating position OPTIONS
Page 1 and 2: MX R10 MX R16 MX R20 MX R28 MX R38
Page 3: Make your tractor more profitable!
Page 7 and 8: P.06-07 MX R10 MX R16 MX R20 MX R28

front linkage - MX

Create successful ePaper yourself

Delete template?

Save as template?