Transient Voltage Surge Suppression

Powerware ® SPDV60 & SPDT60
Modular Single Pole DIN Surge Diverters
Key Features:
Applications:
Shunt Surge Diverter, 1 Pole 60kA
suppression, making them suitable for either main or sub-board protection. The compact
modular design allows the units to be easily installed in new or retrofitting existing
installations. The units feature a plug-in module that may be replaced without rewiring in the
event of a fault.
entry protection in main switchboards and can be used in conjunction with an SPDT60-225
Gas Arrestor for protection on distribution boards remote from the M.E.N. point. Both models
come as standard with mechanical flag status indication and a dry contact alarm for remote
status monitoring.
Surge Category
The SPDV60 & SPDT60 is suitable
for use in category locations:
Category C
(6kV/15kA) Point of Entry/ Service
Entrance
Category B
final sub circuits
1 Mode (L-N) 1 Stage Diverter
1 Mode (N-E) 1 Stage Diverter
MOV
Protection
GDT
Protection
Normal Mode
Power
Input
Power
Output
Power
Input
Power
Output
Common Mode
SPDV60 Block Diagram
SPDT60 Block Diagram
16 Eaton TVSS Point of Entry Protection