RFID coding software - MADA - Marx Datentechnik GmbH

We offer
ID-card, key fob, watch strap transponder, transponder coin. Whether non-contact, magnetic strip,
barcode or inductive, we offer you every possible combination of ID-technology. MADA as both a
producer and full-service company takes care of your whole order from start to finish, from layout production
to printing and lamination through to personalisation and coding.
Make use of many years of experience which MADA can offer you as an independent producer. Whether
it be for large numbers of the same ID-cards, medium-sized orders for individual ID-cards of
multi-functional ID-cards in low quantities
MADA is your reliable partner!
V1.09
Marx Datentechnik GmbH
Hinterhofen 4
D-78052 Villingen-Schwenningen
Tel.: +49 (0)7721 / 8848-0
Fax: +49 (0)7721 / 8848-20
e-mail: info@mada.de
Internet: http://www.mada.de
competence & experience in RFID
card printing and coding systems

ID-card printer
DCP240+ / DCP340+
Magicard Rio 2e / Tango 2e
DCP360i
XID 560ie / 580ie
Tough and easy to operate. Very good printing quality with extremely attractive cost
effectiveness.
• Print Method: monochrome and coloured card printing
• Print Mode: single-sided (DCP240+), double-sided (DCP340+)
• Printing Speed: up to 120 (DCP240+) / 180 (DCP340+) cards per hour (single-sided)
• Resolution: 300 Dpi
• Printing process: Thermal transfer
• Interfaces: USB 1.1 (USB 2.0 compatible)
• Coding option: - Magnetic strip (Loco, Hico)
- LEGIC Prime / Advant
- MIFARE 1K / 4K / DESFire
- HITAG 1 / 2 / S
- Smart card / contact chip
The MAGICARD printers Rio 2e and Tango 2e are tough, quick and extremely quiet
ID-card printers with unique equipment features for its price range.
• Print Method: coloured card printing, optional HoloKote transparent security watermark
• Print Mode: single-sided (Rio 2e) double-sided (Tango 2e)
• Printing Speed: full colour: up to 160 cards per hour (single-sided)
• Resolution: 300 Dpi
• Printing process: Thermal transfer
• Interfaces: Ethernet-interface, USB, Parallel
• Coding option: - Magnetic strip (Loco, Hico)
- LEGIC Prime / Advant
- MIFARE 1K / 4K / DESFire
- HITAG 1 / 2 / S
- Smart card / contact chip
The DCP 360i is at present the fastest and most effective direct card printer in its
class. Best printing quality together with easy day-to-day operation.
• Print Method: monochrome and coloured card printing
• Print Mode: double-sided edge-to-edge direct card printing
• Printing Speed: full colour: more than 180 cards per hour (single-sided)
• Resolution: 300 Dpi
• Printing process: Thermal transfer
• Interfaces: USB 2.0
• Coding option: - Magnet strip (Loco, Hico)
- LEGIC Prime / Advant
- MIFARE 1K / 4K / DESFire
- HITAG 1 / 2 / S
- Smart card / contact chip
With unique Retransfer technology it’s also possible to print plastic cards in brilliant
quality which don’t have a smooth surface.
• Print: on 1 side (XID 560ie), on 2 sides (XID 580ie) mono- or polychrome
• Printing time: 30 secs. per card (4 colours)
• Resolution 300 Dpi (11.8 m Dots/mm) up to 16.7 m colours
• Printing process Thermosublimatio onto retransfer film
• Interfaces Ethernet and USB 2.0
• Coding option: - Magnetic strip (Loco, Hico)
- LEGIC Prime / Advant
- MIFARE 1K / 4K / DESFire
- HITAG 1 / 2 / S
- Smartcard / contact chip
RFID coding software
UniC10_SQL
UniC10_Local
UniC10_TRW
- 1 - - 6 -
The MADA coding system UniC10_SQL is an effective coding system which
was developed for the manual and automatic coding of transponder chips.
• Capable of using multi-user operation, full client server architecture
• SQL-Databank server
• ODBC interface for external coding
• Multi-stage user administration
• Data input in DEZ / HEX / ASCII / BCD
• Easy construction of data layouts
• Connection to manual and automatic coding devices
• Logbook function recording of all coding processes
• Chip variants
- LEGIC prime / advant
- MIFARE 1k / 4k / DESFire
- Sokymat Q5 (Atmel 5557)
- HITAG 1 / 2 / S
The MADA coding system UniC10_Local is an effective coding system which
was developed for the manual coding of transponder chips.
• Application of different coding masks
• Administration of individual sectors/segments
• Data input in DEZ / HEX / ASCII / BCD
• Complete graphical input of data layouts
• Connection to manual coding systems
• Recording of all coding processes including coding data
• Reading of transponders
• Software available for following chip systems:
- LEGIC prime / advant
- MIFARE 1k / 4k / DESFire
- Sokymat Q5 (Atmel 5557)
- HITAG 1 / 2 / S
The MADA printing and coding system UniC10_TRW is a completely independent
software module for simultaneous personalisation and coding of non-contact IDcards
with TRW writing using TRW technology (Thermic Re-Write). It’s possible to
delete the personalisation on ID-cards and re-write them up to 500 times
• Support of ClearJet and Evolis TRW printers
• Personalisation (Monochrome prints) and coding all in one
• Made new cards or only alter data
• Batch or individual processing
• Administration of individual sectors/segments
• Complete graphical input of data layouts
• Reading of transponders
• Software available for following chip systems:
- LEGIC prime / advant
- MIFARE 1k / 4k / DESFire
- Sokymat Q5 (Atmel 5557)
- HITAG 1 / 2 / S

RFID coding software
UniC10_PlugIn
UniC10_Kiosk
The MADA coding system, UniC10_PlugIn is a competitive coding system which
was developed for the integration in different personalisation and card printing
systems.
• Integration in different card printers
• Laying down of different coding systems
• Administration of individual sectors/segments
• Complete graphical input of data layouts
• Record of all coding processes and coding data
• Reading of transponders
Following Print and Personalisation systems are supported
Card printer:
ZEBRA / ELTRON: P310, P310i, P330i
Digital Identification: DCP360i, XID 430/440/450, XID 570/580/590
MAGICARD: Rio 2e, Tango 2e
DataCard: SP35 / SP55
(further models available on request)
Software: ID-Works
CardFive
Avaliable coding modules:
• LEGIC prime MIM256 / MIM1024
• LEGIC advant (ISO15693 / ISO 14443)
• MIFARE 1k / 4k / DESFire
• HITAG 1 / 2 / S
• Sokymat Q5 / Atmel 5557
The MADA coding system UniC-Kiosk is an efficient coding system which was
develop for the rapid change or adaptation of coding data in situ.
• Administrator- / user modus
• Data input in DEZ / HEX / ASCII / BCD
• Support of different PC terminals and IPC
• Logbook function for recording all coding processes
• Compatible coding masks
• Graphical laying down of coding mask
• Chip variants
- LEGIC prime / advant
- MIFARE 1k / 4k / DESFire
- HITAG 1 / 2 / S
The application of changing of a new segment or sector of a transponder already in use is normally complicated. The
ID-cards have to be collected and brought to the designated system producer for coding. With the UniC10_Kiosk coding
system MADA offers you an easy and economical solution to this problem. Installed on a “normal” PC or multi-functional
terminal into which the matching transponder reader is built in , all included media are checked and when necessary altered.
The coding masks can be altered as necessary in administration modus.
Used in a prominent position e.g., canteen, the transponder media in use can be rapidly recoded without great expenditure
Lamination unit
ILU Inline Lamination Unit
TRW printer
TRW printer Tattoo
- 5 - - 2 -
• One-sided lamination for protective or safety coating
• Direct access to XID570/580/590 or DCP360i
• LCD - Display
• 0.5 mil clear patch ribbon, for 550 card sides per roll
• Also available in cut-out form for contact chip card
• Safety laminate coating with standard 2-D design
• Laminate coating with customer-designed 2D / 3D protection features
With the TattooTRW you can produce or actualise specially layered ID or customer
cards within seconds. The card contains a thermo-chromatic substance which,
depending on the temperature used, becomes visible or disappears. The same card
can therefore be re-written and re-used up to 500 times
• Printing time: Delete/print cycle 8 secs.
• Resolution: 300 Dpi
• Print surface: 48 x 80mm
• Printing process: USB 2.0 and parallel interface
• Card depot: For 100 cards with a thickness of 0.76mm

Personalisation software
EDIsecure
Card Management Software Plus (CMS Plus)
Professional card creation system for a fast and high-quality creation of member– or
employees badges. It contains all functions for badge management in an organisation
or company.
Functions:
• simple installation
• simple amplification function by license file
• data safety by USB-dongle
• different language versions
• for Windows 2000/XP and Vista
• example data sets
• competitive personalisation system
• creation of data sets of CSV-files
• picture recording
• twain-support
• saving of pictures in a database or as an external file
• internal MS-Access-database
• connection to external applications
• ODBC-driver
• … and much more
® Card Management Software (CMS)
ID-Works Basic / Standard
ID Works Designer
• Flexible card and report design
• Custom-designed production masks
• Adaption of print size and colour
• Customers’ graphics and logos on monitor
• Supports multiple-table data bank spreadsheets
• User-defined input
• Edges (round or square) for pictures
• Supports TWAIN und video for Windows’ appliances
• Picture from file
• Unlimited static and variable text and graphic fields
• Data banks
• Allows or protects input for selected fields
• Multiple barcode support (21 types)
• Integration of non-contact coding using UniC10_PlugIn (LEGIC/
MIFARE/HITAG...)
• Data-driven production with different card layouts
• Automatic input of user name and system date
• Logbook function and extensive user rights administration
• And much more
ID Works Production
• Dual production of a report on card printing
• Multiple-extended search functions
• Supported picture formats: BMP, JPG, PCX, PNG, PSD, TGA, TIF, WMF, EPS,
CMP
• Simultaneous batch printing for multiple card design
Personalisation software
Software Cardfive
Visitor management
Visitor management
Function summary
• Web-based therefore use possible independent of operating system
• Very low installation costs
• Paperless administration of visitors
• Reduced administration costs
• Use of RFID ID cards
• Right of entry controllable with RFID ID-card
• Personalisation of ID-cards
• ID-cards can be used up to 500 times with TRW printing method
• Password protection
• Visitor master data
• Graphical scanning of visitor status
• Visitor record
- 3 - - 4 -
Classic - Lite Plus - Premier - Professional - Elite
The fitting version for each type of use. Never before was the production and
personalisation of plastic cards so easy.
• Easy to use tools
• Extremely fast and safe to operate functions
• Inclusion of many current graphic formats (e.g. BMP, TIF, JPG, PCX, GIF)
• Drawing up of barcodes (more than 21 types)
• Internal data bank und CSV-databank support
• Data bank interfaces (ODBC)
• Inclusion of non-contact coding modules (UniC10_PlugIn)
• FaceSnap module, automatic face recognition
• Live picture function over digital camera (special Canon-Twain driver)
• Magnetic card coding
• Biometry module
Some of the above-mentioned characteristics are not available for all
versions.
With the new visitor management system BM-Server MADA offers an
integrated and comprehensive solution for the whole process an the gate.
The system combines a helpful and friendly reception for the visitor together
with the quick and easy handling necessary for the receptionist. Additionally
the use of re-writable visitors’ ID-cards provides a cost saving and environmentally-friendly
medium which integrates visitor processing completely into
the existing access control system.
• User-friendly handling
• Low administration costs
• Quick and flexible visitor registration
• Visitor-friendly handling
• Reception relief
• Higher safety standards