SleepCube family brochure - DeVilbiss Healthcare

Effective Treatment for
Obstructive Sleep Apnoea

The SleepCube Series of Positive Airway Pressure devices from DeVilbiss Healthcare is designed to meet the varied needs of people
suffering from Obstructive Sleep Apnoea (OSA) and Sleep Disordered Breathing (SDB).
Built to the highest standards the SleepCube series is a robust compact range of CPAP devices which can be used both in the home
and hospital environment. The SleepCubes’ multi voltage capability allows it to be used virtually anywhere in the world and it can
also be operated from a 12 V power source such as those found in a motor home. For the monitoring of patient compliance DeVilbiss
Healthcare has developed SmartCode and SmartLink which are available for use with all models of SleepCube.
SleepCube Standard
The SleepCube Standard is the first in the range of sleep therapy devices from DeVilbiss
Healthcare. It is a fixed pressure CPAP delivering constant pressure all night from 3 - 20
cm H 2 O.
Now with
SmartFlexTM
Inside
SleepCube Standard Plus
The SleepCube Standard Plus has all the features of a SleepCube Standard device with
the addition of SmartFlex expiratory relief, designed to lower the average pressure
throughout the night and increase comfort for the user.
SleepCube Auto Plus
Now with
SmartFlexTM
Inside
The SleepCube Auto Plus has a unique auto adjusting algorithm that responds to
apnoeas, hypopnoeas and snoring to deliver the most effective therapy whilst sleeping.
Now with the added SmartFlex expiratory relief for increased patient adherence.
SleepCube AutoBilevel
The AutoBilevel adds an extra level of comfort for Bilevel users. Using our ‘proven’ autoadjusting
algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon
their detection the Bilevel pressure automatically adjusts to deliver the best possible
treatment during sleep.
SleepCube BiLevel ST
The SleepCube BiLevel ST is designed to enhance the breathing of patients with
spontaneous respiration. It does not breathe for the patient but instead supports those
who suffer from chronic respiratory failure, breathing difficulties or OSA. Features include
a customisable trigger, real time display and a pressure range of 3 - 25 cm H 2 O.

Patient ID:
Patient ID:
112233
112233
Patient ID2
Patient ID2
kl12mm
kl12mm
First Name:
First Name:
Irene
Irene
Last Name:
Last Name:
Becker
Becker
Gender:
Gender:
Female
Female
Birth Date:
Birth Date:
23.09.1990
23.09.1990
Height:
Height:
1 m 70 cm
70 cm
Weight:
Weight:
60 kg
60 kg
BMI:
BMI:
20.8
20.8
Address 1:
Address 1:
Ludwigsburger Straße 5
Ludwigsburger Straße Address 2:
Address 2:
City:
City:
Heppenheim
Heppenheim
State/Province:
State/Province:
Hessen
Hessen
Postal Code: 64626
Country: Deutschland
Postal Code: 10.08.2010 646268:07:34 AM - 10.08.2010 4:03:42 PM: Country: 112233 - Irene Deutschland Becker: 15.11.2010
Phone Number: 064355/8383834
Email Address: Irene.becker@smartlink.de
Phone Number: 064355/8383834
Email Address: Irene.becker@smartlink.de
Time Zone:
Time Zone:
(GMT+01:00) Amsterdam,
(GMT+01:00) Amsterdam,
Berlin, Bern, Rom,
Berlin, Bern, Rom,
Stockholm, Wien
Stockholm, Wien
Time Statistics - Non-Delay Mode
Time: 7.5 Hours
Time: 7.5 Hours
Time Statistics - Delay Mode
Time:
Time:
0.0 Hours
0.0 Hours
SmartLink 2 Desktop Software
Leak Statistics - Non-Delay Mode
The SmartLink Therapy Management System from DeVilbiss Healthcare
provides a simple means of monitoring and recording CPAP usage
and evaluates the effectiveness of CPAP therapy.
Mask Leak Time:
Average Leak:
Median Leak:
95th Percentile
Leakage:
1.3% of total
30.0 L/Min
24.0 L/Min
60.0 L/Min
Exhale Puff or EPI:
Maximum Leak:
90th Percentile
Leakage:
0.5 Per hour
104.0 L/Min
54.0 L/Min
Main Features
■■
Easily tracks patients and their equipment.
■■
User defined study durations.
■■
Allows remote setting adjustment.
■■
Efficient workflow for setting up new patients, new devices and
managing patient studies.
■■
Auto-detects new study data on data card and imports into the
software.
■■
Customisable Reports – although the software comes as standard
with six report templates, new report templates can be created to
show and hide information as required.
■■
Reports can be easily exported into various formats.
■■
Security Options – enabling three different permission levels to be
adopted;
1. Read only
2. Read and write
3. Administrator – delete, modify reports, database functions
■■
SmartLink Dashboard can be customised to display features such
as reminders, low adherence % and AHI notification.
■■
Personal Reminders can be stored in calendar view for ease of
patient follow up.
■■
A direct connection to download patient information directly
to the PC has been developed alongside the existing download
facility from the data card.
■■
Databases can be added to local and shared networks.
It is possible to import / export information from other locations
or PC’s. All patient databases from previous versions of the
SmartLink software can be imported and added to a new
database.
■■
Documents can be attached directly to patient notes within the
database.
■■
SmartCode, Remote Control Software and Oximetry Software all
built in.
Leak Statistics - Delay Mode
Pressure Statistics - Non-Delay Mode
Mask Leak Time:
Average Leak:
Average Pressure:
Average
Median
Pressure:
Leak:
95th Percentile
95th Percentile
90th Percentile
Pressure:
Pressure:
Max Pressure: Leakage:
Max Pressure:
0.0% of total
0.0 L/Min
5.0 cmH2O
5.0 cmH2O
0.0 L/Min
5.5 cmH2O
5.5 cmH2O
L/Min
5.9 cmH2O
5.9 cmH2O
Exhale Puff or EPI:
Maximum Leak:
Median
Median 95th Percentile
Pressure:
Pressure:
90th Percentile
90th Percentile
Leakage:
Pressure:
Pressure:
0.0 Per hour
0.0 L/Min
5.0 cmH2O
5.0 cmH2O
L/Min
5.0 cmH2O
5.0 cmH2O
1/4
1/4
Created
Created
by
by
DeVilbiss
DeVilbiss
SmartLink®
SmartLink®
Report
Report
Generator
Generator
Version
Version
2.2.1.0
2.2.1.0
10.08.2010 8:07:34 AM - 10.08.2010 4:03:42 PM: 112233 - Irene Becker: 15.11.2010
2/4 Created by DeVilbiss SmartLink® Report Generator Version 2.2.1.0
Mask Leak Time:
Average Leak:
Median Leak:
90th Percentile
Leakage:
10.08.2010 8:07:34 AM - 10.08.2010 4:03:42 PM: 112233 - Irene Becker: 15.11.2010
Leak Statistics - Non-Delay Mode
Mask Leak Time:
Average Leak:
Median Leak:
95th Percentile
Leakage:
1.3% of total
30.0 L/Min
24.0 L/Min
60.0 L/Min
Leak Statistics - Delay Mode
0.0% of total
0.0 L/Min
0.0 L/Min
L/Min
Exhale Puff or EPI:
Maximum Leak:
90th Percentile
Leakage:
Exhale Puff or EPI:
Maximum Leak:
95th Percentile
Leakage:
0.5 Per hour
104.0 L/Min
54.0 L/Min
0.0 Per hour
0.0 L/Min
L/Min
AHI Statistics - Non-Delay Mode

SmartCode
SmartCode is a simple and effective way to remotely track compliance
data. SmartCode is an alpha-numeric code that is shown on
the display of the SleepCube which provides summary data for
the previous day, 7 days, 30 days, 90 days or cumulative. The
SmartCode reading and an internet connection or SmartLink 2
desktop software is all that is needed to access the patients’ information.
The SleepCube device does not need to be directly connected
to the computer, nor does it use memory cards.
SmartCode is available in every model of SleepCube without any
additional fees, equipment or software and provides insightful
data that can be used to determine the patients’ compliance.
SleepCube with SmartCode display
35
Apnea/Hypopnea Index
35
High Leak Flow Time (>95 L/Min)
30
30
Events/Hour
25
20
15
10
5
5.5
5.5
5 5
% of Time Used
25
20
15
10
5
10
12
9
10
0
Last 90 Days Last 30 Days Last 7 Days Last Day
0
Last 90 Days Last 30 Days Last 7 Days Last Day
35
Non-Responding Event Index
35
Exhale Puff Index
30
30
Events/Hour
25
20
15
10
Events/Hour
25
20
15
10
5
1.75
1.5 1
0.25
0
Last 90 Days Last 30 Days Last 7 Days Last Day
5
0
2 2
3
1
Last 90 Days Last 30 Days Last 7 Days Last Day
Model
SleepCube
Standard
SleepCube
Standard Plus
Optional Channels
SleepCube Auto Plus
SleepCube BiLevel S
SleepCube BiLevel ST
Parameters
% of days at least 4 or 5 hours (min threshold)
Day Count
Days at least 4 or 5 hours
Average hours per day
While breathing hours
As above including the following parameters:
Apnoea / Hypopnoea Index – number of apnoea / hypopnoea events detected/hr
Non-Responding Event Index – number of non-responding events detected/hr
High Leak Flow Time – % of therapy time that the system leak was above 95 l/min
EPI – Exhale Puff Index (mouth breathing)
As above including the following parameters:
Time at Pressure – 90th / 95th percentile pressure
Pressure Plateau – percentage of time at upper pressure limit
As above including the following parameters:
% Machine Inspiration – the % breaths in which the Timed Backup feature has been initiated on Inspiration
% Machine Expiration – the % breaths in which the Timed Backup feature has been initiated on Expiration

Features & Accessories
SmartFlex – Expiratory Relief
SmartFlex increases the comfort and adherence to the CPAP
therapy by reducing the pressure when the patient is exhaling.
SmartFlex has three settings, each of which reduces the CPAP
pressure by 1 cm H 2 O during exhalation. SmartFlex can either
be used for the whole night or simply during the ramp period
to enable patients to fall asleep more easily. If an apnoea,
hypopnoea or a snore is detected SmartFlex will turn off and
will only resume once events are no longer detected. SmartFlex
is available in the SleepCube Standard Plus and Auto Plus.
Flow Rounding
Flow Rounding is a patented technology from DeVilbiss Healthcare
which enables a smooth transition from inspiratory (IPAP) to
expiratory pressure (EPAP). There are 6 levels of flow rounding
with level 0 having the steepest slope and quickest transition
and level 5 having the gentlest slope and slowest transition.
By tailoring the pressure waveform (see diagram) according to
the users requirements, the chances of waking the patient are
reduced and comfort is increased. Flow Rounding is available in
SleepCube Standard Plus, Auto Plus, BiLevel S and BiLevel ST.
CPAP Pressure
Flex 1
Exhale
Rounding
1-5
SmartFlex and Flow Rounding settings
Inhale
Rounding
1-5
Flex 2 Flex 3
Heated Humidifier
The optional heated humidifier integrates seamlessly into the
SleepCube CPAP devices and offers the patient 10 heat settings
to ensure maximum comfort during therapy.
SmartLink Module
(For Sleep Labs and Physicians only)
The SmartLink module can be added to any SleepCube device
increasing its capability from being a CPAP to a complete therapy
management system. When attached to a SleepCube Auto Plus,
up to 72 hours of detailed therapy data can be collected, giving
all the parameters needed for overnight assessment or titration
purposes.
Optional SleepCube Heated Humidifier
SmartLink Module and Software package
Pulse Oximeter
By adding the oximeter accessory to the SleepCube, it becomes
the ideal device for conducting CPAP titrations and split night
studies. A selection of different probes are available including
finer probes and an ear probe. The oximetry reports are combined
within the SmartLink 2 desktop software for greater ease of
patient analysis.
SleepCube with SmartLink Module and pulse oximeter attached

Specifications
SleepCube
Standard
SleepCube
Standard Plus
SleepCube
Auto Plus
SleepCube
AutoBilevel
SleepCube
BiLevel ST
Dimensions (H x W x L)
10.7 x 16.5 x 17.5 cm
Weight 1.2 kg 1.2 kg 1.2 kg 1.2 kg 1.2 kg
Pressure Range (cm H 2 O) 3 - 20 CPAP 3 - 20 CPAP 3 - 20 CPAP 3 - 25 BiLevel 3 - 25 BiLevel
Operation Modes CPAP CPAP CPAP,
AutoAdjust
CPAP,
Spontaneous,
CPAP,
Spontaneous,
Spontaneous
Timed,
Timed only
Operating
5° C to 40° C; 0 % to 95 % R.H. non-condensing
Atmospheric Conditions
Sea level to 2,600 m
Storage & Transportation
- 40° C to + 70° C; 0 % to 95 % R.H. non-condensing
Sound Level 26 dBA (tested per ISO 17510)
Power Consumption
Maximum 65 W from AC power source (PAP device only)
Electrical Requirements
100 - 240 VAC, 50/60 Hz
Equipment classification with
respect to protection from electric
Class II
shock
Degree of protection from
electric shock
Type BF Applied Part
Degree of protection
against ingress of liquids
IPX1
Auto Altitude Adjustment 3 3 3 3 3
Max. Operating Altitude ca. 2750 m 2750 m 2750 m 2600 m 2600 m
Ramp Time
Linear Ramp 0 - 45 in 5 min. increments
Auto ON/OFF 3 3 3 3 3
SmartFlex – 3 3 – –
Quick-View option – 3 3 – –
Real-time Display – – – 3 3
Flow Rounding – 3 3 3 3
Event Detection (AP, HYP, SN,) – 3 3 3 3
Visual Mask Off Alert 3 3 3 3 3
DeVilbiss Healthcare Ltd.
Unit 3, Bloomfield Park, Bloomfield Road
Tipton, West Midlands DY4 9AP
United Kingdom
Phone + 44 (0) 121 521 3140
Fax + 44 (0) 121 521 3141
www.devilbisshc.com
enquiries@devilbisshc.com
Distributor:
DeVilbiss Healthcare has a policy of continuing improvement, we therefore reserve the right to vary
details at any time without notice. SleepCube is a registered trademark of DeVilbiss Healthcare.
0612/V12/SD/000690191.UK