Sava Agricultural, Implement, garden tyres, Tyres for ... - Savatech

INTRODUCTION
The company SAVA VELO manufactures tyres for agricultural
machinery, garden, implement and industrial tyres. The high quality
of products based on a tradition of manufacturing going back
80 years conforms to rigorous domestic and international criteria,
the end product being a combination of superb construction and
excellent driving characteristics on different surfaces.
Many years of experience in development along with close co-operation
with vehicle manufacturers ensure the continual development
of new products and improvements in already existing solutions.
Thanks to the advanced technical procedures and manufacturing
flexibility we are able to meet the requirements of customers and
adapt product specifications to conform to their special needs.
In the future too we will follow a clear development policy and
adapt ourselves to meet customer requirements. We are aware
of the importance of long-term business relations; therefore we
want to remain your reliable partner.
Agricultural tyres
B12: B16: B17: B18:
• Densely arranged and with
slightly broader ribs along
the tyre tread that absorb
vibrations while travelling.
• Due to the rib width tyre
wear is reduced, especially
when used on harder surfaces.
Agricultural tyres:
• Good handling owing to
directionally curved ribs.
• Thanks to the narrow and
relatively thinly distributed
ribs, the grip on soft
ground, such as soil and
clayey earth, is good and
the ride is safe on steep
slopes as well.
• The shape of the tyre itself
contributes to efficient selfcleaning.
• A tyre with thinly arranged
but wide ribs for use on
softer surfaces, especially
on sandy and similar ones.
• The expanded central
part of the rib ensures
excellent course stability.
• Special reinforced edges
between the tyre ribs
increase its rigidity and
compactness which make
the tyres suitable for transporting
higher loads.
B12, B16, B17, B18.
The range of tyres used on
drive wheels of smaller agricultural
machinery such as
motor cultivators, mowing
machines, various attachments,
etc.
2

B15:
• Features a special directionally ribbed
tread pattern with a reinforced centre
rib for good handling, especially on
soft grounds.
• Used mainly on auxiliary wheels fitted
on the front axles of smaller agricultural
machinery.
Code
Tyre
dimension
Carcass
rigidity
Tread pattern
designation
TL/TT
Tyre
width
[mm]
Outer
diameter
[mm]
13x5.00-6 2PR B12 TL/TT 119 334 3.50-6 125 125 1.50 20 4.00-6
510258 4PR 185 185 2.25 TR13, TR87 90/90
75654 4.00-8 2PR B12 TT 105 425 3.00 109 155 1.50 30 3.50/4.00-8
54592 4PR 160 230 2.75 TR13, TR87 90/90
51448 4.00-10 2PR B12 TT 109 470 3.00 128 185 1.50 30 4.00-10
81029 4PR 185 265 2.75 TR13
80780 4.00-12 2PR B12 TT 109 526 3.00 150 212 1.50 30 4.00-12
54664 4PR 212 300 2.75 TR13, TR87 90/90
54872 5.00-12 2PR B12 TT 145 570 4.00 180 257 1.20 30 5.00-12
81014 4PR 265 375 2.25 TR13
63864 3.50-6 2PR B16 TT 96 353 2.50 80 112 1.50 30 4.00-6
63111 4PR 115 165 3.00 TR13, TR87 90/90
64019 3.50-8 2PR B16 TT 96 395 2.50 93 132 1.50 30 3.50/4.00-8
81181 4PR 121 185 3.00 TR13, TR87 90/90
72907 5.00-10 2PR B16 TT 129 520 3.00 165 243 1.25 30 5.00-10
63865 4PR 243 355 2.25 TR13
68015 5.00-12 2PR B16 TT 135 570 3.00 180 257 1.25 30 5.00-12
62242 4PR 265 375 2.25 TR13
78781 4.0-10 2PR B17 TT 111 460 3.50 140 195 1.50 30 4.00-10
4PR 195 272 2.75 TR13
66261 5.0-10 2PR B17 TT 135 510 3.50 180 257 1.25 30 5.00-10
65257 4PR 257 365 2.25 TR13
Rim
Drive
wheel
Load
[kg]
Driven
wheel
Inflation
pressure
[bar]
Maximum
speed
[km/h]
Corresponding
tube
Valve
Technical specifications
67404 6.50/80-12 2PR B18 TT 165 604 5.00 243 345 1.20 30 5.00-12
75213 4PR 355 500 2.40 TR13
3.50-6 2PR B15 TT 96 343 2.50 112 1.50 30 4.00-6
63110 4PR 165 3.00 TR13, TR87 90/90
63112 3.50-8 2PR B15 TT 96 388 2.50 132 1.50 30 3.50/4.00-8
63723 4PR 185 3.00 TR13, TR87 90/90
3

Implement and garden tyres
Implement and garden tyres:
B19: G1 GARDEN:
• A relatively smooth tread pattern with narrow ribs on wide
profile tyres especially suitable where the terrain must
not be damaged (undergrowth and tree roots); also prevents
plants wrapping around the tyre.
• Slightly longitudinally shaped grooves prevent skidding.
• Medium inflation pressures (0.5 to 3 bar) are
recommended to prevent sinking into soft and wet ground.
• A wide range of applications: different types of machines
from tedders to mowers, attachments on agricultural
machinery as well as auxiliary equipment for transport
at railway stations and airports. Used on vehicles for
maintaining and cutting grassy surfaces. For use on the
drive wheels of smaller vehicles on flat or slightly inclined
slopes.
• Cube-shaped tread pattern ensures a good grip even on
softer surfaces.
• A medium inflation pressure (0.5 bar to 1.5 bar) is
recommended to prevent damage to cultivated surfaces;
for vehicles where loads are high an inflation pressure of
1.5 to 3 bar is recommended.
• Due to the wide contact surface soil compaction is
reduced.
• Possible use on the drive and auxiliary wheels of smaller
tractors and machines in parks and sports grounds as
well as in farming and forestry.
Note:
TT − TUBE TYPE TYRE − used with a tube
TL − TUBELESS TYRE − used without a tube
Recommended for TL tyre fitting: more attention is
advised during the fitting procedure in order not to
damage the tyre bead.
Code Tyre
dimension
Carcass
rigidity
Tread
pattern
designation
TL/TT
Tyre
width
[mm]
Outer
diameter
[mm]
Rim Load
[kg]
Inflation
pressure
[bar]
79755 11x7-4 4PR B19 TT 183 270 6.00 425 3.10 30
Maximum
speed
[km/h]
Corresponding
tube
Valve
13x5.00-6 4PR B19 TL/TT 121 320 3.50 185 2.25 20 4.00-6
TR13, TR87 90/90
72236 15x6.00-6 4PR B19 TL/TT 155 355 4.50 257 2.00 20 15x6.00-6
508429 6PR 355 3.00 TR13
10PR 475 4.25
70168 16x6.50-8 4PR B19 TL/TT 172 403 5.375 265 2.00 20 16x6.50/7.50-8
508382 6PR 335 3.00 TR13
502308 13x5.00-6 2PR G1 TL/TT 122 320 3.50 125 1.50 20 4.00-6
504488 4PR 185 3.00 TR13, TR87 90/90
504243 18x8.50-8 2PR G1 TL/TT 214 450 7.00 180 0.80 20 18x8.50/9.50-8
508092 325 2.00 TR13
4

B13:
Tyres for trailers:
• Rough tread pattern ensures a good grip even on dirt
roads.
• Tyre tread pattern is self-cleaning.
• Construction and compound ensure silent running and a
long service life.
B14:
• Tread pattern suitable for asphalt and dirt roads ensures
a good grip and absorbs vibrations during rides.
• The rougher part of the lateral contact surface with
intermediate grooves drains water.
• The special tread pattern and supporting compound
with high lateral stability ensure a comfortable ride and
smooth running.
Tyres for trailers
B61:
• Main use of tread pattern B61 is on tarmac roads in dry
and also in wet.
• Tyre can be used on light car trailers, which do not
exceed speed 140 km/h.
Code
Tyre
dimension
Load
index,
speed
symbol
Tread pattern
designation
TL/TT
Tyre
width
[mm]
Outer
diameter
[mm]
505996 3.50-8 46J B13 TT 92 386 2.50 170 2.5 100 3.50/4.00-8
TR87 90/90, TR13
57143 4.00-8 C 66J B13 TT 108 415 3.00 300 3.5 100 3.50/4.00-8
TR87 90/90, TR13
56774 4.00-8 C 71J (6PR) B13 TT 108 415 3.00 345 4.25 100 3.50/4.00-8
TR87 90/90, TR13
69999 3.50-10 51J B14 TT 92 437 2.50 195 3.25 100 3.50/4.00-8
60858 59J (4PR) 243 TR87 90/90, TR13
Rim
Load
[kg]
Inflation
pressure
[bar]
Maximum
speed
[km/h]
Corresponding
tube
Valve
64634 4.00-10 69J (4PR) B14 TT 108 466 3.00 325 3.50 100 3.50/4.00-10
76059 74J (6PR) 375 TR87 90/90, TR13
508369 4.80/4.00-8 70N B61 TL 115 514 2.50-8 335 5.00 140
508795 4.50-10 76N B61 TL 135 495 3.50-10 400 4.25 140
513026 5.00-10 72N B61 TL 149 524 3.50-10 355 3.50 140
508797 79N 525 437 4.25 140
5

Tyres for wheelbarrows, attachments and carts
Tyres for wheelbarrows, attachments and carts:
V-5501:
• Narrow ribbed tread pattern with longitudinal grooves
for good directional stability.
• Tyre rigidity and a long service life are due to the tyre
construction and compound.
• These tyres are suitable especially for wheelbarrows
and different carts as well as auxiliary wheels for
various attachments used in farming.
Code
Tyre
dimension
Carcass
rigidity
Tread
pattern
designation
TL/TT
Tyre
width
[mm]
Outer
diameter
[mm]
512107 4.00-6 2PR V-5501 TT 102 343 2.50-6 150 2.10 30 4.00-6
512113 4PR 210 2.50 TR13
512114 6PR 270 3.50
512116 3.50-8 2PR V-5501 TT 90 373 2.50-8 150 2.10 30 3.50/4.00-8
512117 4PR 180 2.50 TR13
512118 4.00/4.00-8 2PR V-5501 TT 101 399 3.75-8 165 2.10 30 3.50/4.00-8
512119 4PR 220 2.50 TR13
Rim
Load
[kg]
Inflation
pressure
[bar]
Maximum
speed
[km/h]
Corresponding
tube
Valve
Testing
Tests in Sava central laboratory (tyre wear, ozone, physical
characteristics of compounds, cord fabrics and bead wire).
Testing according to international standards: E T R T O,
ECE, DOT.
6

Tyre designations
List of tubes
Tyre designations, valves
• 4.00-6
• 3.50/4.00-8
• 4.00-10
• 5.0-10
• 4.00-12
• 5.00-12
• 15x6.00-6
• 16x6.50/7.50-8
• 18x8.50/9.50-8
• 260x85/3.00-4
• 11x6.00-5
• 11x7.10-5
Valves
E T R T O DIN Additional designation
V2-01-1 7774 TR13 38G/11,5
/ 7785 TR87 33G
V6-02-1 7778 / 41,5G
TR 13
TR87 - 90/90
V6-02-1
7

Sava d. d.
4502 Kranj, Škofjeloška 6, Slovenija
tel.: ++386 04 206 58 81, 206 61 51
fax: ++386 04 206 64 02, 206 64 03
e-mail: info@sava.si
http://www.sava.si
SAVA PRINT
Derby
SAVA TRADE
München
EUROSAVATECH
Trieste
KRANJ
SAVA TRADE
Praha
SAVA TRADE
Zagreb
SAVA TRADE
Split
SAVA TRADE
Warszawa
SAVA TECH
Budapest
TRADING COMPANIES IN SLOVENIA
AND ABROAD:
SAVA TRADE
Vertriebsgesellschaft, m.b.H., München
tel.: ++ 49 8 954 414 30
fax: ++ 49 8 953 289 51
SAVA TRADE, Sp. z.o.o., Warszawa
tel., fax: ++ 48 22 721 13 62
SAVA TRADE, s.r.o., Praha
tel.: ++ 42 0 22 49 41 966, ++ 42 0 22 49 42 567
fax: ++ 42 0 22 49 42 559
SAVA TRADE SPLIT, d. o. o.
tel.: ++ 385 21 / 837 980
fax: ++ 385 21 / 837 590
SAVATECH TRADE, Ltd., London
tel.: ++ 44 020 82 83 35 08
fax: ++ 44 020 86 88 00 55
C E R T
I F
I C A T E
SLOVENIAN QUALIT Y
SLOVENSKA KAKOVOST
P R E I Z K U S
I S O
000004 ]
I S O
9 0 0 0
9 0 0 0
Production: Savatech, d.o.o.; Graphic design: Creatim; Photo: Igor Pustovrh, archive Sava; Translated by: Lea Terlikar; Editor: Atina Miklavčič; Printed by: Tiskarna Januš; March 2004

Agricultural, garden and
implement tyres