Sleeved Plug Valves - Camacvc.com

Recommendations

Info

FLUOROSEAL CAGED PLUG VALVES Caged Control Valves The caged control valve is ideal for abrasive applications with high concentrations of solids. The caged control valve is commonly used in both throttling and on/off applications. Caged valves have been used successfully in many critical applications in the Mining, Pulp & Paper, and Chemical Processing industries. The design of the Caged Control valve provides maximum protection to the PTFE sealing surfaces in the plug valves. The key to the caged design is that the PTFE sleeve in the valve is never directly exposed to the process flow. This allows the sleeve to maintain its sealing integrity in abrasive applications. The design of the caged control valve allows the plug to rotate freely around a fixed cage within the body. The cage stays stationary in the body while the plug rotates around the cage. Thus the sealing area of the plug is in direct contact with the sleeve to provide bubble tight shutoff. The cage stays in position protecting the PTFE sleeve from the flow while the plug is in any intermittent position such as when the valve is moving from the open to the closed position or when the valve is throttling. The cage has upper and lower bearings made from either UHMWPE or RTFE that prevents galling between the plug and cage. A keyway keeps the cage from rotating in the body. The body has a male key and the cage has a female keyway that keeps it locked into the body. This allows free movement of the plug around the cage. The caged control valve still allows for in line adjustment for through valve leakage just as a standard plug valve does since the plug and the cage are independent of each other. Caged control valves can be used in many abrasive applications as well as applications with suspended solids. The cage and plug in the caged control valve are generally made from CD4MCu material; it’s an abrasion resistant alloy with the corrosion resistance of 316SS. Caged Control valves are available in any material, from carbon steel and stainless steel to any of the more exotic alloys. Outer Plug Cage Full flow Plug 0 0 Control flow Plug throttling shut-off Plug 90 0 12
V-PORT & CHARACTERIZED PLUGS FluoroSeal Plug Valves are also available with Characterised Plugs for fine control applications. Standard V-Ports in 60 deg. and other custom configurations are available in all trim materials. The design and features of the FluoroSeal plug valve makes it an excellent choice for fine throttling in slurry and chemical applications. The no cavity design allows the plug valve to throttle without exposing the stem seal to line pressure, a definite advantage over most ball valves specifically in high cycling applications. The cage control V-Port plug valve is mostly used in highly abrasive applications offering the benefits of a metal seated control valve, with the added advantage of a bubble tight shutoff at a fraction of the cost. The product is available in all materials from 1” to 14”. = V-Port cage assembly 35 Typical flow chart for a 1” 60 deg. V-Port. 30 25 20 Cv 15 10 5 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% www.fluorosealvalves.com 13
Page 1 and 2: SLEEVED PLUG VALVES www.fluorosealv
Page 3 and 4: DESIGN FEATURES Design Features Flu
Page 5 and 6: 2-WAY VALVES - DIMENSIONAL DATA Fig
Page 7 and 8: CLASS 600 Refer to size range avail
Page 9 and 10: 3 WAY & MULTIPORT
Page 11 and 12: 3-WAY VALVES - DIMENSIONAL DATA Fig
Page 13: SPECIAL PRODUCTS
Page 17 and 18: HF ALKY VALVES FluoroSeal HF Alky v
Page 19 and 20: FluoroSeal Severe Service Sleeved P
Page 21 and 22: DOUBLE BLOCK AND BLEED AND SAMPLING
Page 23 and 24: JACKETED VALVES
Page 25 and 26: Dimensional data for full jacketed
Page 27 and 28: TECHNICAL DATA AND ACCESSORIES
Page 29 and 30: TECHNICAL DATA Pressure 9psig) 300
Page 31 and 32: ACCESSORIES T-Wrench and Extension
Page 33 and 34: PRODUCT AVAILABILITY END CONNECTION
Page 35 and 36: FLUOROSEAL INC. WARRANTY TERMS & CO

Sleeved Plug Valves - Camacvc.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?