Sleeved Plug Valves - Camacvc.com

ACCESSORIES
T-Wrench and Extension Option
180 0 rotation: Double calculation for 90 0 horizontal or vertical line.
Valve Size 1/2 3/4 1 11/2 2 3 4
Q 12 12 12 16 24 24 36
H 6 6 7 8 8 9 10
If longer “H” dimension, please specify.
Handwheel Extension - Gear Operator
Heavy duty gear
Support may be required depending on the
supplied as standard
length of the extension.
(To be supplied by customer.)
Stem Extension - Gear Operator
Stem extensions are used for remote operation of the valve. Actuators can be
attached to the top of the extension. Specify the length of the extension required
and the figure number of the valve it is to be attached to.
Crank Handle
Size Units H Q
Handwheel
Dia.
4” EG inch 10.75 8.00 9
mm 273 203 229
6” EG inch 11.50 10.00 12
mm 292 254 305
8” EG inch 13 10.00 15
mm 330 254 381
10” EG inch 15.50 12.00 18
mm 394 305 457
Chain Wrench
12” EG inch 17.25 12.00 15
mm 438 305 381
Valve Size Units 1/2 3/4 1 11/2 2 3 4
Q inch 13 13 16 24 36 36 48
mm 330 330 406 610 914 914 1219
Specify the chain length required and
whether the valve will be install in a horizontal
or vertical line.
To calculate chain length:
90 0 rotation: 1. Double required drop
Chain Wheel
2. Multiply “Q” by .5
Specify the chain length required and
3. 1+2= required chain length
whether the valve will be install in a
To calculate chain length:
1. Double required drop “B”.
2. Multiply chain wheel diameter
“A” by 2.6.
3. 1+2= required chain length.
www.fluorosealvalves.com
29