Siemens Simodrive 611U/D Quick Startup Guide - Wittenstein

Quick Startup Guide TPM +
1 Table of Contents
1 Table of Contents 2
2 General Information 4
2.1 Description, designations 4
2.2 Whom does this manual concern 4
2.3 Which signs and symbols are referred to in this manual 4
2.4 Exclusion of liability 4
2.5 EC low-voltage directive / EMC regulations 4
2.6 Copyright 4
3 Safety 5
3.1 Intended use 5
3.2 Improper use 5
3.3 Safety Instructions 5
3.3.1 General safety instructions 5
4 Type plate information – identification 7
4.1 Identification plate, designation 7
5 Setting the parameters 8
5.1 TPM + 560 V Ratio 16 9
5.2 TPM + 560 V Ratio 21 9
5.3 TPM + 560 V Ratio 31 10
5.4 TPM + 560 V Ratio 61 10
5.5 TPM + 560 V Ratio 64 11
5.6 TPM + 560 V Ratio 91 11
5.7 Measuring System / Encoder TPM + with Resolver 12
5.8 Measuring System / Encoder TPM + with Heidenhain Endat
Multiturn 12
5.9 Measuring System / Encoder TPM + with incremental encoder
Heidenhain ERN1185 12
6 Connection schematic TPM + 12
6.1 TPM + with resolver 12
6.2 TPM + with absolute encoder Heidenhain EnDat ECN1113 /
EQN 1125 13
6.3 TPM + with incremental encoder Heidenhain ERN1185 13
Page en-2
Revision: 02 4091-D014998 Release: 07.10.2008