Coatings, Paints & Inks Defoamers - Clariant

n D-FOAM-R C115
Very efficient general purpose coating defoamer. Excellent
compatibility in most waterborne coating systems with minimal
effect on gloss.
n D-FOAM-R C301
Low-VOC, mineral oil-free defoamer that provides excellent
performance and compatibility in a wide range of inks and
coatings. Will not swell the rubber rolls or plates used with
aqueous flexo inks. May be added in either letdown or grind
stage.
n D-FOAM-R C330
A highly effective synthetic defoamer for acrylic, acrylic
copolymer and polyvinyl alcohol systems.
n D-FOAM-R C331
Lower cost alternative to D-Foam-R C330 with similar
performance and features.
n D-FOAM-R C920
100% active silicone based antifoam for solvent borne and
solvent free epoxy, urethane and acrylic (uV & EB curable)
coatings. Effective at very low concentrations, it removes
entrained air to provide superior coating gloss and clarity.
It also improves slip and mar resistance of UV-curable
coatings. Excellent grind phase defoamer for pigmented
coatings.
www.ics.clariant.com
Clariant Corporation
Industrial & Consumer Specialties
P.O. Box 866
625 East Catawba Avenue
Mount Holly, NC 28120 USA
Customer Service: 800.942.7239
fun.us@clariant.com
We accept no liability whatsoever for any damage resulting from improper conditions
or operation of the system. This information is based upon information
believed to be reliable and is intended to provide general notes on our products
and their uses. It should not therefore be construed as guaranteeing specific
properties of the products described or their suitability for a particular application.
Any existing industrial property rights must be observed. The quality of our
products is guaranteed under our General Conditions of Sale.
©2010 Clariant Corporation