Newair AI-120S Portable Ice Maker & Ice Dispenser ... - Air & Water
Newair AI-120S Portable Ice Maker & Ice Dispenser ... - Air & Water
Newair AI-120S Portable Ice Maker & Ice Dispenser ... - Air & Water
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION 6: TROUBLESHOOTING<br />
Problem: Possible Cause(s): Solution(s):<br />
The “ADD WATER” indicator<br />
light is on.<br />
The “ICE FULL” indicator is on.<br />
The ice cubes stick together.<br />
There are ice cubes inside the<br />
machine, but the ice maker<br />
won’t dispense ice cubes.<br />
The ice making cycle is starting<br />
but no ice is being made.<br />
There is not enough water in the<br />
water reservoir.<br />
There is too much ice in the<br />
machine.<br />
The ice cycle is taking too long.<br />
The water temperature in the<br />
inner tank is too cold.<br />
The clear viewing window is<br />
open.<br />
The moving ice shaft is blocked.<br />
Either the ambient temperature<br />
or the water temperature in the<br />
inner tank is too high.<br />
Turn off the ice maker, fill it<br />
water and press the “POWER”<br />
button again to restart the unit.<br />
Remove ice from the ice basket.<br />
Turn off the ice maker and<br />
restart it once the ice melts.<br />
Select small size ice cubes for the<br />
next cycle.<br />
Change the water in the inner<br />
tank. For best results, use water<br />
that is between 45°F-90°F.<br />
Close the clear viewing window.<br />
Release the ice dispensing lever<br />
for 3 seconds, and then try<br />
pushing it again.<br />
Move the ice maker to an area<br />
with an ambient temperature<br />
under 90°F and pour cooler<br />
water into the tank.<br />
The refrigerant is leaking. Consult a technician.<br />
The pipe in the cooling system is<br />
blocked.<br />
Consult a technician.