2009 AFR Fork Owner's Manual - Specialized Bicycles

FRAME GEOMETRY
1. Top Tube Length* 5. Head Tube Angle**** 9. Stack
2. Chainstay Length 6. Wheelbase 10. Reach
3. BB Height 7. Standover Height**
4. Seat Tube Angle*** 8. Head Tube Length
SAFIRE CARBON
SMALL MEDIUM LARGE
1 527 20.75” 550 21.65” 582 22.91”
2 420 16.54“ 420 16.54“ 420 16.54“
3 335 13.19“ 335 13.19“ 335 13.19“
4 74° 74° 74°
5 68.5° 68.5° 68.5°
6 1071 42.17” 1096 43.15” 1137 44.76”
7 690 27.17” 701 27.60” 728 28.66”
8 128 5.04” 148 5.83” 158 6.22”
9 565 22.24“ 584 22.99" 594 23.39“
10 398 15.67“ 424 16.69“ 452 17.80“
SAFIRE ALLOY
SMALL MEDIUM LARGE
1 556 21.89“ 590 23.23“ 625 24.61“
2 420 16.54“ 420 16.54“ 420 16.54“
3 335 13.19“ 335 13.19“ 335 13.19“
4 74.5° 74.5° 74.5°
5 68.5° 68.5° 68.5°
6 1084 42.68“ 1115 43.90" 1155 45.47“
7 721 28.39” 728 28.66” 755 29.72”
8 100 3.94” 120 4.72” 140 5.51”
9 570 22.44“ 588 23.15” 588 23.15”
10 382 15.04” 400 15.75” 441 17.36”
* TT length is the Horizontal Measurement from the center-line of the HT at the top of
the HT to the center-line of the projected seat tube.
** Stand Over height is measured vertically at the centerpoint of the TT measurement.
*** Effective Seat Tube Angle is measured from BB to 250mm above seat collar.
**** All angles measured with the fork in the middle (Fox) or lower (S140TA) position.
Head angle slackens by 0.75° when the fork is in the fully extended position.
6