ROVAL RAPIDE WHEELSET OWNER'S GUIDE - Specialized Bicycles
ROVAL RAPIDE WHEELSET OWNER'S GUIDE - Specialized Bicycles
ROVAL RAPIDE WHEELSET OWNER'S GUIDE - Specialized Bicycles
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HIGH FLANGE HUB MAINTENANCE - ASSEMBLY / DISASSEMBLY3BearingsurfacesGREASEBearingsurfacesGREASEAxle CapThreadsGREASEGREASEGREASEGREASESeal and pawlmechanismNOTE: Use a low viscocity grease45mmAllen key5mmAllen keyRecommended Torque:80 in-lbf (9.0 N-m)Maximum Torque:90 in-lbf (10.2 N-m)ADDITIONAL MAINTENANCE INFO:FRONT HUB: The steps are the same as the rear hub, without the parts specific to the cassette body (1 axle, 2 bearings, 2 axle caps).AXLES: Front and rear Star Hub axle extraction requires removal of the hub bearings, due to the axle flanges between the hub bearings.This service should be performed by an authorized Roval service center.For additional information on Roval wheel service for spoke repair/replacement, bearing, cassette body or rim replacement, please contactyour local <strong>Specialized</strong> dealer, or the <strong>Specialized</strong> Customer Service department, e-mail at customerservice@specialized.com or call(877) 808-8154.
LOW FLANGE HUB MAINTENANCE - DISASSEMBLY1 23 4356123456Non-Drive Side Axle CapAlloy AxleSealed BearingHub ShellRatchetCassette Body Seal789101112Alloy Axle SpacerCassette BodyAlloy Axle SpacerCassette Body SealDrive side Axle NutLocking screw7 83 9 3 10 11 121 25mm Allen KeyClockwise1/4 turn 10mm Allen key17mmPull to remove axle cap3• Pull cassette body off by hand• Remove spacer• Push axle out with thumb• Rotate the bearings with a finger to feel for roughness or play. If the bearings show signs of roughness or play, replace the bearings.• Clean bearing surfaces.
LOW FLANGE HUB MAINTENANCE - ASSEMBLY4GREASEBearingsurfaceGREASEBearingsurfaceGREASEGREASEGREASEGREASENOTE: Use a low viscocity greaseSeal and pawlmechanism5610mm Allen key5mm Allen keyGREASEGREASERecommended Torque:80 in-lbf (9.0 N-m)Maximum Torque:90 in-lbf (10.2 N-m)17mm• Finger tighten drive side axle nut, use 10mm Allen in axle.• Check for bearing play, wiggle back and forth.• Rear wheel: Do not install cassette immediately.• Install the wheels in the front and rear dropouts, check for any bearing play at the rim. If any play is felt, remove wheel and repeatadjustment steps.• Install cassette on rear hub.LOW FLANGE FRONT HUB:Follow the same assembly/disassembly steps as the rear hub.One side Alloy axle cap: non-adjustable.Other side Steel axle cap: adjustable, same as rear hub.• Unlock and unthread adjustable axle cap.• Push axle out with thumb.• Service bearings same as rear hub.
Change language