Vtrak 8110/12110/15110 SCSI-SATA RAID Storage Systems

Product Information
Feature Set
- HW RAID 0,1,10,5,50
- Full remote monitoring and management
of all functions, status and alerts
- Global and Dedicated Hot Spares
- Online Capacity Expansion (OCE)
- RAID and Stripe Level Migration (RLM)
- Capacity Coercion
- Robust data and error handling - Write
hole prevention, Read Check Table,
SMART and Multi-dead prevention
- Non-Volatile error logging
- Cluster support with dual IDs per array
- LUN Mapping
- Metadata On Disk (MDD) support drive
roaming within the enclosure or drive
group roaming between subsystems
- Predictive Data Migration (PDM)
preemptively detects possible drive loss
and migrates data ahead of failure
- Bad sector remapping and management
- Read cache, Write cache, write back &
write through modes
- Background Activities – Rebuild,
Initialization, Synchronization,
Redundancy (consistency) Check,
Media Patrol, Bad block management
VTrak 8110/12110/15110
SCSI-SATA SCSI SATA RAID Storage Systems
Management Software
– Remotely manage multiple Promise arrays in same
interface from ANY computer on the web
– Full remote monitoring and management of all
functions, status and alerts
– Remote notification and alerts
– Out of Band Management through Management
Ethernet port or RS-232
– SNMP, WBEM/ Standards support
– CLU over RS-232 or Telnet
– HTTP Web based HTML GUI
– SSL security, User Access privilege control and authentication
Controller
– Industry standard SATA2 controller and backplane enclosure design
– High performance 600 MHz Intel ® 80321 I/O Processor with PCI-X
internal bus, HW XOR assist and local memory control
– Two intelligent Ultra160 SCSI ports
– One 10/100 Ethernet port for out of band LAN based Management
– One RS-232 for configuration CLI
– 256MB DDR DRAM data cache, supports up to 512
– 72 Hour Battery Backup Unit standard
SCSI Controller