LFS | VK wiring trunking system, Dahl - OBO Bettermann
LFS | VK wiring trunking system, Dahl - OBO Bettermann
LFS | VK wiring trunking system, Dahl - OBO Bettermann
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
General planning aid<br />
How can I work out the cable volume<br />
Cable diameter and space required; 1 = diameter in mm, 2 = space required in cm²<br />
An important criterion for the selection<br />
of the right <strong>trunking</strong> size of<br />
the underfloor <strong>system</strong> is the cable<br />
volume. As the cables are never<br />
packed tightly together or are absolutely<br />
parallel, it is not enough to<br />
base the volume calculation solely<br />
on the cable diameter. A realistic<br />
calculation is provided by the formula<br />
(2r)². To simplify your work,<br />
we have listed the diameters and<br />
space requirements of the most<br />
important cable types on this double<br />
page. Important: the values are<br />
average values, which may vary<br />
between manufacturers. Please refer<br />
to the manufacturer's specifications<br />
for the exact values.<br />
The right choice<br />
The table on this page will help<br />
you to select the correct <strong>trunking</strong><br />
size. Besides the usable crosssection<br />
of the appropriate <strong>trunking</strong>,<br />
please observe the current<br />
DIN/VDE standards for the fill factor<br />
and the approved cable heating.<br />
Calculation using the formula<br />
(2r)²<br />
The diameter says little about the<br />
actual space required by a cable.<br />
Calculate: (2r)². This value reflects<br />
the realistic space requirements,<br />
including the compartments.<br />
06 <strong>LFS</strong>_Katalog_2010_Neuer_Stand / en / 25/02/2010 (LLExport_00995)<br />
8 <strong>OBO</strong> <strong>LFS</strong>