Usb to serial cable driver - Natus Medical Incorporated

USB to Serial Cable Driver Installing the USB-to-Serial Cable Driver for EchoLink
Figure 6—Hardware Wizard Complete
Windows Vista or
Windows 7 1. Navigate to the folder where the Echo-Screen Firmware Update is located
(this can be a CD-ROM drive or a local folder location if the firmware had
been distributed electronically).
2. Double-click the USB-to-Serial Driver directory and then double-click the
Windows_Vista directory
3. Double-click on the UC-232ADriverInstaller__Vista.exe file to begin the
installation.
4. You will see a "Welcome to the Installshield Wizard for PL-2303 Vista
Driver Installer-ATEN" dialog. Click the Next button and follow the
prompts presented by the wizard.
5. Connect the USB-to-serial adapter to a USB port on your computer.
Windows Vista will automatically install the drivers.
Older Windows
Operating Systems In the unlikely event your computer is still running Windows 98, Windows ME
or Windows 2000, drivers have been provided for these operating systems as
well. Navigate to the proper directory for your operating system as above. The
installation wizard may be slightly different than depicted for XP or Vista, but
using the guidelines above will allow for a successful installation of these
drivers.
4 P/N 005399A © 2010 Natus Medical Incorporated