Section A - Sign Supplies - Home | Interstate Electric Corporation
Section A - Sign Supplies - Home | Interstate Electric Corporation
Section A - Sign Supplies - Home | Interstate Electric Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A-59<br />
STOPCOCKS<br />
These high vacuum stopcocks are suitable for the requirements of<br />
<br />
<br />
available upon request.<br />
EGL<br />
Hyde<br />
Catalog Number Catalog Number Dimension<br />
EGL-2MM HYD-2MMSLG <br />
EGL-4MM HYD-4MMSLG <br />
EGL-6MM HYD-6MMSLG <br />
EGL-8MM HYD-8MMSLG <br />
EGL-10MM HYD-10MMSLG <br />
<strong>Sign</strong> <strong>Supplies</strong><br />
STOPCOCK & O-RING GREASE<br />
Several greases are available to fit the differing requirements,<br />
preferences and climates of our many glassblowing customers.<br />
Catalog<br />
Put<br />
Number Description Up<br />
LAB-S8950 <br />
8690-B22 Thomas Lubriseal 75g Tube<br />
TRA-APEZION <br />
TEMPERATURE GAUGES & INDICATORS<br />
Reaching proper glass temperature is essential for consistently bright, clean and high quality signs. EGL-734200 digital temperature gauge was designed specifically<br />
<br />
the operator to fully concentrate on bombarding of units. A high quality durable probe made especially for neon tubing (8-20mm diameter) with an aerospace-grade<br />
low-mass foil thermocouple (replaceable) provides accurate temperature readings significantly faster than with conventional large mass thermocouples while customdesigned<br />
noise immunity circuitry ensures consistently reliable readings while bombarding. Unit is housed in a durable plastic case and comes equipped with one 9 volt<br />
battery for approximately 180 hours of operation.<br />
TRA-84542 digital infrared temperature gauge is similar to the EGL-734200 except it reads temperature through an infrared process, therefore no probe needs to be<br />
connected to the tube during the bombarding process.<br />
Tempilac temperature indicating liquid is applied by brush to the sign tubing before bombarding and dries instantly to an opaque mark. When 488° F or 500° F is<br />
<br />
thinner without changing the indicating temperature. The thinner the coating the quicker the reaction time.<br />
Catalog<br />
Number Description Mfgr.<br />
EGL-734200 (1) <br />
TRA-84542 <br />
EGL-734210 <br />
TEM-488 <br />
TEM-500 <br />
TEM-THINNER <br />
NOTE: (1) Also available with a 5' probe.<br />
EGL-734200<br />
Tempilac Products<br />
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019