Oilfield Catalog - Gates Corporation

GC ® 32-XD
Global Crimper
GATES 2" “Xtra Duty” HOSE CRIMPER
The 32 indicates that it crimps through 2” I.D. hoses for the entire Gates Hydraulic product
line and the XD stands for Xtra Duty that points out that this can handle every day crimping
volume even in a large hose assembly shop. This crimper is equipped with a 5HP
2-stage pump that delivers twice the number of crimps per minute as the OmniCrimp ® 21
machine it replaces. This pump, along with the patented CLOVER LEAF crimp design,
delivers over 470 tons of crimp force to efficiently handle up to 2” six wire hose and couplings.
This design also eliminates any and all finished coupling crimp O.D. taper that is
a problem for ordinary crimpers in the market place. The open throat allows for crimping
from the front or back of the machine although it is recommended that bent tube couplings
are crimped by inserting from the back.
Capability:
Crimps every hose and coupling in the Gates catalog
up to 2 1/2” ID
Model Number:
GC ® 32-XD
Product Number:
7480-7001
Part Number:
78828
Motor:
5 HP
Power Source:
208-264 Volts, 45-65 HZ, Single Phase and 20 Amps
electrical inverter for world-wide use.
Crimper Dimensions:
37” H x 23” W x 19 1/2” D
Stand Dimensions
(Adjustable Height):
25 1/2” H x 31 3/4” W x 16 1/2” D
Weight:
660 lbs.
Crimping Force:
470 Tons
www.gates.com/oilfield
Page 102